Color for published page does not update

I built a web site in 2009.
I have just made changes to it in 2011.
I added 3 new pages, updated a few others.
I publish the site changes. Or I publish the entire site. Do each to MobileMe.
The updated pages colors turn from red to blue.
Then I want to keep a folder of the site, so I choose publish to a folder.
At this point, the updated pages turn red again.
I publish the site changes. Or I publish the entire site. Do each to a folder.
The updated pages colors turn from red to blue.
When I choose publish to MobileMe again,
without making any changes,
the same pages turn to red again as if they were changed.
And the same thing if I choose publish to a folder.
Why do they change? How can I fix this?

Yes I understand that.
But after it has been published once for each way and then I don't make any changes, they should not turn red and need to be published again. They should stay blue if I don't make any changes. Even if I switch the publishing mode.
I publish just the changes, then I publish the whole site. I send both to MobileMe. Then I switch modes. I publish changes and then the whole site to a folder. Everything is blue. Then if I switch back to publish to MobileMe, the few pages turn red again, after they had been completely blue after publishing them the first time. I don't think that should be happening. It acts like something is stuck.

Similar Messages

  • Blog Summary Page Does Not Update Picture

    For some reason, when I create a new blog entry by duplicating the last one and adding new content, the Blog Summary page will not update the picture. I sometimes either have to create a new blank blog entry, or drag a different picture into the placeholder, followed by my original.
    Is this happening to anyone else? I think I am going to finish out my year-long blog project with iWeb/MobileMe, then drop both! This is getting to frustrating.

    LawsonStone wrote:
    Is this happening to anyone else?
    Perhaps to this person:
    _blog summary didn't show the pictures_.
    LawsonStone wrote:
    I think I am going to finish out my year-long blog project with iWeb/MobileMe, then drop both! This is getting to frustrating.
    A wise move — problems with iWeb's blog are a recurring theme on these forums: Lost all blog entries or all comments or unable to publish, etc. If you switch to a dedicated blogging platform you're likely to have a better experience. For a success story using a non-iWeb blog hosted on WordPress, see this old thread:
    _To blog or not to blog_

  • HT1338 The latest update for Mountain Lion OS X 10.8.3 keeps asking for Restart, but does not update.

    The latest update for Mountain Lion OS X 10.8.3 does not update.  Keeps asking for Restart but no update.

    Yup, I'm experiencing the exact same thing. 
    I (and many others) are experiencing the same or similar issues with the 10.8.3 update.
    I've sent an response to Apple but have not yet received anything back (yet). 

  • "Arrange new window" (thumbnail window for digital painting) does not update

    Hi,
    I have an issue with Photoshop CC V2014.2.1 release where if I open a new document, then create a duplicate window of that document (Window->Arrange->New window for "Document.psd") if I am working on the original window, the duplicate window does not update any brush strokes until I select the duplicate window or perform an undo command.
    On previous versions (CS4 & CS5) the 2nd window would update each brush stroke automatically.
    I have looked for options to auto-update the 2nd window, but can't find anything. Is this a bug or am I missing an option?
    Thanks,
    Tim

    Well there is feedback http://www.apple.com/feedback/itunesapp.html and if you have an AppleID there is a "bug reporter" http://bugreporter.apple.com/.

  • Lync for Mac 2011 does not update Presence properly.

    Hello all,
    I work in a Enterprise environment, we run Active Directory and bind our Macs to the domain. We use Lync for Mac, and I've noticed that on the Mac clients, the user status does not update accordingly. When my users are in a conference call, it shows
    available, etc. It works fine on a Windows machine with that same user.
    If the event is on the Outlook calendar, sometimes it will show them as away during that time period, but it does not seem to update when on the phone/in a meeting, etc.
    Any advice would be appreciated, my user is on Mac OSX 10.9.3 and Lync 14.0.8.
    Thank you,
    Michael

    We are seeing the exact same thing at our company.   A hundred or more Macs all with broken presence.
    Its issues like this that have us looking at Jabber now - Cisco doesn't seem to have buggy OS X software like Microsoft.    That will be 40,000+ seats lost due to this and other issues.    Maybe if enough hit MS in their pocketbook
    they will start paying more attention to Macs.. or at least test them before rolling out software.
    Note a few things regarding our setup:
    1. Our Lync is on-prem 2010 and 2013 mix
    2. Our email is in 365
    3. We are using ADFS and FIM for SSO, Dirsync. 
    4. We do not domain join our Macs.  (back when Lion wrecked all our domain joined accounts we stopped with that foolish practice)
    It worked with previous versions of Lync 2011. 
    It works for zero Lync 2011 users.   Lync 2013 on-prem domain joined machines work.   We see the same thing where a Mac users also logged into 2013 on a Windows machine will help update the Lync 2011 client... but its not an acceptable work-around.
      I suspect its having difficulties with the external cert.

  • Pages does not update

    The current (31 Dec 2013) version of Pages is 5.01, my MacBook has version 4.3.  The App Store does not show any update and says for Pages "Installed".
    How can I update to the current version?

    Problem solved: New version is in the Application folder, but Dock referred to old version.

  • Page does not update even if I hold shift while I click update or press F5

    In any other web browser the shift + F5 reload all contents of a updated page. Only in Firefox this does not work.
    I love Firefox, the best browser for me. But I can't continue to use it with this problem.
    I am a software developer. I need control over tools and it's make me crazy.
    All my friends told me the same problem about Firefox and have migrated to others browsers where this basic problem does not work.
    If you want to maintain Firefox at top, make it always work at least with basic features like that!
    Sorry my English.

    Vivek,
    I have tested Ctrl + F5, Ctrl + Shift + F5, Ctrl + Shift + R.
    Nothing work.
    Thank you very much for your help, but I have no time to lose. Since now I will adopt another browser.
    Thanks.

  • Formatting of published page does not match working view

    I have iWeb '08 version 2.0.2. I have various text underlined in my working copy mingled with text that is not underlined. (For example, underlined book titles followed by author's names.) When I publish it, and go to view the page online, everything is underlined. Does anybody know what I could be doing wrong?
    Thanks, Jennifer.

    To see if it is a publishing problem or an iWeb problem you can publish your site to a folder on the desktop and double click the index.html file to launch your site in the browser and check out the offending page.
    If its OK then you have a publishing problem.
    If you are publishing to .Mac try a "Publish All to .Mac".

  • Home page does not update correctly

    Can anyone help me? I have searched this forum and tried suggestions from the support site, but nothing has helped. Here is my problem:
    I am using iWeb '08 and posting to MobileMe. I add entries and/or make changes to existing pages and then publish them. When I check my site, my home page is an old one. I can navigate to my updated pages and then when I return to my home page it is correct.
    Any ideas on how to fix this for my computer and anyone else looking at my site?
    Thanks.

    Empty the cache in your browser. The old pages are on your drive, and you need to have an empty cache folder so that your browser will download new copies of your pages.
    Which browser are you using?

  • Calendar publishing host does not update automatically

    GroupWise 2014 is installed on OES11 SP2 with web access and calendar publishing host in virtual vmware environment. The calendar will not automatically update existing or display newly published users' calendars until I manually enter rcnovell-tomcat6 restart command. Any ideas?

    bobodajdaj,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://www.novell.com/support and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Forums Team
    http://forums.novell.com

  • Photoshop CC: Save For Web function does not update filesize previews when I change filetypes

    I recently tried to save some web banners and wanted to optimize for smallest filesize with best looking output, and as I changed filetypes from Gif to Jpeg to PNG, the preview at the bottom of the window that usually updates with estimated filesize was not changing and the preview image would not change as well. The issue made it impossible to predict the output and required that I actually save in all the variations, then reopen them to see the end result.
    My software is up to date.
    Not really sure what it can be.
    Please help.
    Casey

    Same issue. Hoping someone responds to this thread soon

  • Paged dataset does not update it's child dataset

    My paged dataset works great, except on refreshing it's child
    dataset, when sorting or navigating from page to page.
    Clicking on the record in the paged dataset does return the
    correct child dataset record. Clicking on any of the column headers
    to sort the paged dataset or clicking on any of the page functions,
    i.e. Next Page, Previous page, does not update the child dataset
    record.
    The first record of the paged dataset is set to 'selected',
    after sort or page navigation function.
    What am I missing?
    Here is the code that updates the child dataset record:
    onClick="pvPOrders.setCurrentRow('{ds_RowID}');"
    Here is the sort:
    onclick="dsPOrders.sort('PONUM','toggle');"
    Here is the page navigation:
    onclick="pvPOrders.nextPage();"
    There are no observers. The code can be viewed here:
    http://codeshare.ulatu.com/mare3184

    Hi Doug,
    You shouldn't have to do the manual setting of the
    currentRow. The fact that your code snippet here:
    http://codeshare.ulatu.com/mare3184
    Has your PagedView data set pvPOrders depending on dsPOrders
    means that when you set the current row on pvPOrders it just
    forwards the set request on to dsPOrders.
    I'm a bit confused by the other snippet you posted here:
    http://codeshare.ulatu.com/marc0722
    because I don't see any mention of a PagedView in that
    snippet. In any case, I mocked up something that should be similar
    to your situation, and it seems to work just fine:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
    Transitional//EN" "
    http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="
    http://www.w3.org/1999/xhtml"
    xmlns:spry="
    http://ns.adobe.com/spry">
    <head>
    <meta http-equiv="Content-Type" content="text/html;
    charset=utf-8" />
    <title>Untitled Document</title>
    <script src="includes/xpath.js"
    type="text/javascript"></script>
    <script src="includes/SpryData.js"
    type="text/javascript"></script>
    <script src="includes/SpryPagedView.js"
    type="text/javascript"></script>
    <script type="text/javascript">
    <!--
    var dsStates = new
    Spry.Data.XMLDataSet("data/states/states.xml", "/states/state");
    var dsCities = new
    Spry.Data.XMLDataSet("data/states/{dsStates::url}",
    "/state/cities/city");
    var pvStates = new Spry.Data.PagedView(dsStates, { pageSize:
    5 });
    //-->
    </script>
    <style type="text/css">
    <!--
    .hover {
    background-color: #FFCCFF;
    .select {
    background-color: #6699FF;
    -->
    </style>
    </head>
    <body>
    <input type="button" value="Prev"
    onclick="pvStates.previousPage()" /><input type="button"
    value="Next" onclick="pvStates.nextPage()" />
    <p>Select a State:</p>
    <div spry:region="pvStates dsStates">
    <div>{pvStates::ds_PageNumber} of
    {pvStates::ds_PageCount}</div>
    <ul spry:repeatchildren="pvStates" spry:choose="">
    <li spry:when="{pvStates::ds_RowID} ==
    {dsStates::ds_CurrentRowID}" spry:setrow="pvStates"
    spry:hover="hover" spry:select="select" spry:selected="">
    {pvStates::name}
    </li>
    <li spry:default="" spry:setrow="pvStates"
    spry:hover="hover" spry:select="select">
    {pvStates::name}
    </li>
    </ul>
    </div>
    <p>Cities for the currently selected state:</p>
    <div spry:region="dsCities"
    spry:repeatchildren="dsCities">
    {name}
    </div>
    </body>
    </html>
    --== Kin ==--

  • My CS6 Production suite does not update from the help menu? The appilcation Manager says: "The updat

    My CS6 Production suite for Windows 8 does not update from the help menu? The appilcation Manager says: "The update server is not respondiing, the server might be offline temporarily..." I have registered correctly. I have turned off my AVG virus protection and tried to update my software, still the Application Manager gives the same response. When I login, I can see that my serial numbers are there, so it must have registered correctly.
    Help!

    If you don't want to download the updates manually, then you need to update your Application Manager.  The relevant links are here:
    Windows
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
    Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    Hope this helps.

  • Since the latest update to OX I have been unable to download the contents of some emails because pages does not support the font they are created in. Is there a fix for this?

    Hi, since I installed the latest update on my Mac I have been unable to open the contents of some emails because it is saying that pages does not recognise the font. For example it is saying 'some features aren't supported, the font Calibri isn't available on OS X. It was replaced with TrebuchetMS' This means that I cannot open letters from my daughters school. Is there any way round this other than getting rid of this nightmare MAC and going back to Windows!?

    http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
    Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again.

  • Since last update anything on the first three lines of a web page if it has a a button to click on to go to another page does not work. use Google Crome for fo

    Loging onto my bank I go to the barclays pege there on the top line is "log in" it used to work when I click on it but has stoped, any button on the first three lines of a web page does not work.
    I now use Google crome but would like to stay with Firefox if this coruption can be sorted.
    Rod

    Please reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    See if this helps solve the issues you had and please report back to us!

Maybe you are looking for

  • How to get iccid by using imei?i had lost my iphone and i want to find it back.

    how to get iccid by using imei?i had lost my iphone and i want to find it back.

  • Dictation using Mountain Lion.

    I upgraded to Mountain Lion and "Dictation" does not work. Is there a fix for this? I can go into system settings and see that the computer's microphone is picking up my voice.

  • Color Palette Conundrum

    Is there a way to set up a preference in Illustrator CS5 in which a custom color palette opens with every new document instead of the standard color palette?  Can't seem to figure this one out and it would be a tremendous time saver for me. 

  • Tests do not run on Windows 2003 server

    I got all my unit tests running fine on my local machine but I had a few issues getting them to work on the build server. The first problem was that ant task was looking for c:\windows, the 2003 windows directory is c:\winnt. A change to WindowsSWFLa

  • Pdf in swf

    Hi, I want to import PDF-Data to a FLA movie but the import from Flash isn't very accurate. With swftools I can convert a Pdf perfectly to an swf but when importing the swf into Flash the import doesn't work very well again. I want to have editable t