Color Garbage displayed after first pdf opened?

Acrobat 9 Pro, part of CS4, version current, 9.0.0. Windows XP
Acrobat 8 worked fine.... now load CS4 with Acrobat 9 Pro and problems develop displaying files.
I open a pdf file, it always displays fine. I open a second pdf file, it display color garbage, like a broken color tv. I can only have ONE acrobat file open at a time?
In Firefox latest version, you open a pdf within web page, it will always display total color garbage, nothing recognizable... HELP! TYIA

shameless bump

Similar Messages

When combining PDF's, the author is picked up from the first PDF opened. How can I make it use a new author when combining several documents?

When combining PDF's, the author is picked up from the first PDF opened. How can I make it use a new author when combining several documents?

Make sure that fast web view is enabled.

Hp 6500 (all-in-one) "General Printing Error (Ox610000f6)" displayed after first use!

I unpacked my new hp 6500 All-in-One (wireless) today. I was receiving my first fax on the hp 6500 when it stopped printing midway and started to display "ERROR. General Printer Error (Ox610000f6). Refer to printer documentation." I have turned it off and unplugged it many times. It does not work at all. Error message has been displayed all day. This is ridiculous. If I can't resolve this tomorrow it's going back to the store and I'm getting another brand.
There is also NO reference for the error code. Weak.
Message Edited by marie14 on 07-12-2009 10:37 PM

The original poster just acquired their printer. In this case, the solution was to simply replace it as it was still under warranty.
The error code indicates an internal detected logic fault. These fall into two classes: transient events and faults do to failed HW. Transient events are often solved by simply power cycling the printer after disconnecting all I/O. Permanent faults are typically not repairable by the user.
I understand your frustration. If the printer is still under warranty, then simply ask H-P to replace it.
Other solutions are to reset the printer's NVRAM. For those with an Officejet 6500, the reset method is to press and hold the * and 6 keys while plugging in power and then continue to hold for another 10 seconds.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

Colors not displaying when viewing PDF files

Recently I've discovered that when viewing PDF files I'm not seeing all of the colors in the charts. This is happening with PDF files that I made as recently as last year (when everything looked fine). It's also happening with files that other people at other organizations have made. If I go to a coworkers computer and pull up the files, I can see everything just fine. Also, when I print the files, everything comes out just fine. Any ideas as to why I'm not seeing things correctly on my machine? I'm using a Dell laptop, Windows 7, Adobe Acrobat Pro XI, Microsoft Word 2010. I've also been having problems with graphics disappearing when converting Word files to PDF files but that's a topic I'll post on the Acrobat page. Seems like it may all be related to my new laptop. Thanks.
Attaching an image of what I see when I view the PDF file and a screen shot of the Word file with the color in which does print even though I can't see it. I can see some of the colors in the PDF file but not all of them.

Hi,
The problem with ie9 or ie8 gets more complicated, since the alt key works on some files, one example is:
http://www.instrulog.dk/download/manualer/humanware/focus-14-manual
The files where it does not work are placed on sites that require sign in with a digital signature, so it is impossible to give urls to the files.
With screen readers and with pdf files in the browser, the normal way of getting to the
address bar does not work, but that is not really a problem but a minor irritation, and not a new behavior.
Claus

PDF opens blank window

I have an application that opens pdf in an iframe. There are several pdfs that are opening fine. However, after the most recent Reader 10.1 upgrade, a particular pdf is showing a blank frame. The pdfs stream data from the server and display the populated pdf.
The pdf opens up fine the first time it is opened. The second time it is opened, it displays a blank frame. I have waited 10 minutes for it and nothing displays. If anything, it should open faster the second time. If I shut down IE and reopen, it again works the first time and then it fails the subsequent times. If this is not the first pdf opened when IE is brought up, then it shows the blank frame when you open this pdf.
The pdf data is streamed from the server.
There is a link on the site to open the pdf. The link opens up an input dialog. After filling in a couple of fields in the dialog and hitting OK, the pdf opens. I mention this because there are other pdfs in the site that do not take input; these pdfs open directly from a link; these stream data from the server; and these pdfs open fine every time I open them.Windows XP Service Pack 3, IE 7, Adobe Reader 10.1
This pdf was working fine in Reader X and previous versions of Reader.
This pdf works fine in Windows 7, IE 8 and IE 9.
This pdf works fine in Windows XP, IE 8.
Can someone help me figure out what is causing this pdf to fail?

Thank you very much for the reply. I followed your instructions. This fixed half of the problem. Links to pdf files that are on web pages now come up with a box that asks if I want to open or save the file, without a blank browser window in the background. That is great.
When I tested the fix with pdf file links in email, the problem still exists. I tested links in Outlook Express, Yahoo mail, and Gmail. Any time I click on a pdf link in an email, a blank Firefox window opens and then I get the small window that asks me if I want to open or save the file. Sounds like this is a configuration issue, not a technical problem. Thanks for your help.

How do you perform partial word search using PDF Open Parameters?

Hello,
We are using the 'search=' open parameter in the URL string, which open a PDF and automatically searches for a word within the PDF. It works great for whole word searches. Unfortunately, it does not work for partial word, or phrases. In other words, if I'm searching on '123456' and there is a word in the document that is '1234567', it will not find the partial word, or first 6 characters of the 7 character word. You can perform a partial or phrased search using the advance search feature of Adobe Reader. So, currently after the PDF opens, and shows no hits on the automatic search for '123456', we are able to manually search again for a partial word search, and then see matches in the document. Is there any way to specify to use a whole or partial word search when using the 'search=' open parameter, so that we can automatically match on partial and whole words? Something like 'search=123456*'?

It never worked that way. Command-F shows the page search bar.

FF 6.0 doesn't open pdf-links, after clicking on "open pdf" error message says file not supported or damaged. IE opens file all right. Please advice.

Firefox 6.0 doesn't open pdf-links after clicking on "open pdf". I frequently need to do literature searches and I need to view pdf files in the browser. After clicking on the pdf - link of a file the main options are to open or download the pdf. Every time I try to open a pdf-file a blank page and an error message appears saying the file would not be supported or is damaged. IE, however, opens the file all right. I tried various changes in the security and cookie settings without success. Please advice.

Hi SGckc,
This document is almost certainly a dynamic XFA form. Unfortunately, our mobile Reader does not support displaying or filling such forms. The application that produces this form embeds this message into the document so that non-supportive viewers (like ours) will display this "error" page when the document opens. I do realize that this is confusing and I would like to add some additional detection to our Reader for this case. However, we've avoided doing this for fear of confusing users even further. Your feedback helps though. Hopefully we'll find a way to detect this case and present a better message to the user like: This form is not supported by the mobile version of the Adobe Reader. Please open and fill it on the non-mobile version of the Adobe Reader for Windows, Linux or Mac OSX.
Thank you for contacting us!
Pat

After updating to Acrobat PRO 9.5.2 PDFs open VERY Slowly

I am using Acrobat PRO on a workstation (Windows 7 Ultimate - Service Pack 1)
After updating to Acrobat PRO 9.5.2, all pdf files open VERY slowly (30-60 secs). It does not appear to matter if the file is local to the workstation or on the network. Also the size of the file does not seem to matter or whether this is the first file opened or a subsequent file.
In addition just opening Adobe Acrobat is equally slow.
I have tried turning off the anti-virus software. No impact.
Any suggestions appreciated...

Have you tried "Repair Acrobat Installation" to see if it makes any difference? To do this try this:
Help >> Repair Acrobat Installation.
Another option is to press the shift key while clicking or double clicking on the PDF file to open. this stops loading all the useless fonts in the document and other useless plugins in acrobat.
The third option is to delete the registry key that appears to be corrupted . However, if you nothing about registry keys, then you can't do it unless your company systems people can help you. The registry entries are:
HKEY_CURRENT_USER \ Software \ Adobe \ Acrobat Reader
HKEY_CURRENT_USER \ Software \ Adobe \ Adobe Acrobat
It is a question of renaming them while you have exited from acrobat. Once this is done, restart the system and start/launch the acrobat and the fresh keys will be generated. PLEASE NOTE: DON'T DO THIS UNLESS YOU HAVE THE HELP OF YOUR SYSTEMS PEOPLE IN YOUR COMPANY.
Hope this helps.

Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays imags in pdf docs.

Immediately after updating Acrobat Pro XI to the latest version, the software no longer displays images in pdf docs. All the boxes where images are supposed to be are solid grey. Old documents that worked are no longer displayed correctly and new documents I make do not display images. All grey boxes. Worked fine before the update. Suggestions?

Hi precious_star,
Could you please let me know what version of OS are you using.
Open Acrobat and go to "Edit > Preferences > Page Display" and check whether 'Show large images' option is checked.
Is this issue specific for one PDF?
If possible, please share the file with me via email so that I can also check at my end.
I have sent you a message with my contact id details.
Hope to get your response.
Regards,
Anubha

Anyone having a problem with iMovie in Mavericks v 10.9.3 ? when previewing the a slideshow the colors all disappear after the first image.

Anyone having a problem with iDVD in Mavericks 10.9.3? When previewing a slideshow all color is lost after the first image.

Is your problem with iMovie as the title suggests or with iDVD?

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

I open the first pdf and can read it. If I open a second pdf, the second one does not appear.

Moving the cursor over the first pdf begins painting the second pdf in small blocks. I'm running XP with all the latest MS updates. I've also run the latest updates for Adobe Reader and checked the Adobe Add-ins are in IE 8.0. This same issue occurs, running Adobe Pro. No errors are logged in the Event Log. Any idea where to start looking?

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running Mac OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of Mac OS X, select Go ▹ Go to Folder… from the Finder menu bar and enter “~/Library” (without the quotes) in the text box that opens.
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.

PDF Not Displayed After Parameter Form Submitted

We are moving a Forms6i application to web deployed Forms10g. Reports with parameter forms are being called using web.show_document(...) with the oracle.reports.utility.FrmReportsInteg JavaBean to hide database login credentials, as described in the Forms/Reports integration white papers.
On our development server this process works as expected: the form displays a new browser window containing the parameter form with URL http://server/reports/rwservlet?userid=&report=report&desformat=pdf&destype=cache&paramform=yes, the parameter form is submitted, and the report output is displayed as a PDF embedded in the new browser window.
However, on our customer's test server, after the parameter form is submitted, the Oracle Reports OracleAS Reports Services - Servlet Command Help page is displayed. Executing the rwservlet/showjobs command shows the job as being successfully completed. Clicking on the Job Name link redisplays the parameter form, and submitting this returns to the Oracle Reports OracleAS Reports Services - Servlet Command Help page.
I have not been able to trace any other posts describing the same behavior on Metalink or OTN. Has anyone else seen this?
Development server is OracleAS 10g (9.0.4.1) on Red Hat Linux, customer server is OracleAS 10g (9.0.4.1) on Solaris.
Anyone explain this difference between the two servers?

wonder if your problem is the host.domain name?
It has to be the same name as the "host:" name that was entered in the "Register with Oracle Internet Directory" screen - while installing AS. Reason is that: when the .html is running, it has no connections to the AS, OID, SSO or anything else - it runs independentally. For it to go back into the oracle 'system', the full host.domain name is needed. So, if when the AS was installed, the "fully qualifed" domain name was not given, you may have problems and could need to reinstall AS again. (speaking from sad experience :) )
regards

Colors faded, washed out in PDF display

Hi all, odd problem... found a few like it in the forums, no solutions though.
When I export a PDF from InDesign CS3 to Acrobat 8, the PDF opens with a dull "wash" over the entire pages.
When I scroll or move thru the document in Acrobat, I briefly see the pages properly (vivid color, rich blacks) for a split-second, then this grayish "wash" appears over everything. This even happens in the Print preview dialog.
It seems to print OK, but executives will be opening & viewing this file and not always printing. I'm getting comments like "can you fix the color?"
My color settings are synchronized thru Bridge.
Any insight is much appreciated!!

I am having a similar but different problem.
My documents print from InDesign CS3 just fine. The printed output matches my on screen colors just fine. When I create a PDF from InDesign, the onscreen PDF looks just fine... BUT (here's the problem) the printed output from the PDF is washed out.
The reason this is important is because I have to send a PDF file to the printer to have it printed. The printer only accepts PDF files.
The color space is CMYK in all cases (US Web Coated SWOP v2)
I have tried a TON of different options, from "Preserve Color Space" to not preseving, convert, etc. etc.
Does anyone have any ideas why printing from InDesign looks good but printing from the PDF file is always washed out?
Thanks,

Hi, coding to display popup window after first alv grid display

hi
can anybody please send coding to display popup window after first alv grid display i.e. first the prog shows grid display and from grid display the user select the field and on the basis of field value i need to show pop up window in the first secondary window and then third popup window.
thanx
rocky

Hi rocky,
here is the sample code .hope this helps you.
TYPE-POOLS : SLIS.
DATA : GT_OUTTAB TYPE VBAK OCCURS 0,
       GS_PRIVATE TYPE SLIS_DATA_CALLER_EXIT,
       GS_SELFIELD TYPE SLIS_SELFIELD.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : ITAB TYPE TABLE OF SLIS_SELFIELD,
       WA_ITAB LIKE LINE OF ITAB.
START-OF-SELECTION.
PERFORM POPULATE_GT_OUTTAB.
PERFORM GET_POPUP.
PERFORM POPULATE_ITAB.
PERFORM FIELDCAT.
PERFORM DISPLAY_DETAILS.
*&      Form FIELDCAT
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
LOOP AT ITAB INTO WA_ITAB.
WA_FIELDCAT-FIELDNAME = 'TABINDEX'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-SELTEXT_L = 'TABLE INDEX'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'SEL_TAB_FIELD'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 20.
WA_FIELDCAT-SELTEXT_L = 'FIELD NAME'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
WA_FIELDCAT-FIELDNAME = 'VALUE'.
WA_FIELDCAT-TABNAME = 'WA_ITAB'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-SELTEXT_L = 'FIELD VALUE'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
ENDLOOP.
ENDFORM.                    " FIELDCAT
*&      Form POPULATE_GT_OUTTAB
      text
--> p1        text
<-- p2        text
FORM POPULATE_GT_OUTTAB .
SELECT * FROM VBAK
       UP TO 10 ROWS
       INTO TABLE GT_OUTTAB.
ENDFORM.                    " POPULATE_GT_OUTTAB
*&      Form GET_POPUP
      text
--> p1        text
<-- p2        text
FORM GET_POPUP .
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
   I_TITLE                       = 'SALES ORDER'
I_SELECTION                   = 'X'
I_ALLOW_NO_SELECTION          =
   I_ZEBRA                       = 'X'
I_SCREEN_START_COLUMN         = 0
I_SCREEN_START_LINE           = 0
I_SCREEN_END_COLUMN           = 0
I_SCREEN_END_LINE             = 0
I_CHECKBOX_FIELDNAME          =
I_LINEMARK_FIELDNAME          =
I_SCROLL_TO_SEL_LINE          = 'X'
    I_TABNAME                     = 'SALES ORDER'
    I_STRUCTURE_NAME              = 'VBAK'
IT_FIELDCAT                   =
IT_EXCLUDING                  =
I_CALLBACK_PROGRAM            =
I_CALLBACK_USER_COMMAND       =
   IS_PRIVATE                    = GS_PRIVATE
IMPORTING
   ES_SELFIELD                   = GS_SELFIELD
E_EXIT                        = G_EXIT
TABLES
    T_OUTTAB                      = GT_OUTTAB
EXCEPTIONS
   PROGRAM_ERROR                 = 1
   OTHERS                        = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GET_POPUP
*&      Form POPULATE_ITAB
      text
--> p1        text
<-- p2        text
FORM POPULATE_ITAB .
WA_ITAB-TABNAME = GS_SELFIELD-TABNAME.
WA_ITAB-TABINDEX = GS_SELFIELD-TABINDEX.
WA_ITAB-SEL_TAB_FIELD = GS_SELFIELD-SEL_TAB_FIELD.
WA_ITAB-VALUE = GS_SELFIELD-VALUE.
APPEND WA_ITAB TO ITAB.
ENDFORM.                    " POPULATE_ITAB
*&      Form DISPLAY_DETAILS
      text
--> p1        text
<-- p2        text
FORM DISPLAY_DETAILS .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = ' '
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
   IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = ITAB
EXCEPTIONS
   PROGRAM_ERROR                  = 1
   OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " DISPLAY_DETAILS
award points if helpful.
regards,
deepthi reddy

Color Garbage displayed after first pdf opened?

Similar Messages

Maybe you are looking for