Color Highlights not working in bar chart with two data points

Iu2019m using Crystal Reports 2011. I have created a bar graph using two data fields in the Chart Expert. I have set the colors for the bars in the Color Highlights tab, but the colors that I have defined have not been applied to the graph.
I have tried changing the colors numerous times and have done it in both design and preview modes. It seems to be somethign with having two data points because I don't have this problem when using just one data point. Please help!

is the colour mode Color by group or color by series

Similar Messages

Numbers Charts: Stacked bar chart with two sets of data

Hi....newbie with first post
I'm trying to create a stacked bar chart with two lots of comparative data.
So, there is Basic + Overtime for April 2010 as one stack (ie the basic is one colour, stacked on top is the overtime in a different colour)
Basic + Overtime for April 2011 next to it.
I can get April figures next to one another as four separate columns (2 x basic, 2 x overtime), or I can get all four figures in a single stack, but I can't to two columns (one for each year) of basic and overtime.
Any ideas?

UK,
What you are trying to do will require that you interleave the two sets of two-series data into one longer two-set series, and then plot just the one pair of series. Clear as mud?
What I'm saying is that you have to fake out the program into thinking that you have just two sets, not four.
You will have one series that has, for instance Apr 2010 Basic, Apr 2011 Basic, May, 2010 Basic, May 2011 Basic, etc.. This other series in that chart will have Apr 2010 Overtime, Apr 2011 Overtime, May 2010 Overtime, May 2011 Overtime, etc.
The bad thing here (I'll anticipate your first complaint) is that 2010 and 2011 data will have the same color for Basic and another color will be assigned for both 2010 Overtime and 2011 Overtime.
To get separate color sets for 2010 and 2011 data pairs, you will have to create two charts and overlay them. Both charts would be built in the alternating year format described above, but in one chart all the 2010 data would be blank and in the other chart all the 2011 data would be blank, leaving spaces in the chart for the data from the other chart to nest in.
Jerry

Help: Chart with multiple data points

I would like to create a chart which has 2 data points. The way I know it works, each metric has only one data point. If I want the metric history chart shows 2 data points (y axis) over the same period of time (x axis). Is it possible to do such metric?
Thanks for the help.

Don't believe you can have 2 data points as you are suggesting. Oracle is working on enhancing the reporting framework for EM, but not sure when BI will be there. You can send data from the OMR to an existing BI infrastructure and report from there.
Sorry...
Have a good day.

Bar chart with current date in X axis

Hello
I have attached a vi that I hoipe somebody can help with.
If you look at the vi, there are two bars showing.
1.How can I attach the current date to the X axis.
For instance.....suppose the first bar (far left) was produced with data from yesterday...then the X axis would indicate yesterdays date.
The next bar was produced from data obtained today, so would show todays date.....etc
An array of dates is not suitable, as no prior date knowledge is assumed......just the current date when the bar was graphed.
2. Can the date be vertical....or even fancier....on a 45 degree slope, upwards and to the right
Thank you and best regards
Ray
Solved!
Go to Solution.
Attachments:
Bar chart.vi ‏16 KB

Hi, this will plot what ever data you got with the current date on the X Axis. But remember that since this is a graph, any new value plotted will erase the previous one. Dont have LabVIEW 9 otherwise would have checked your VI out. This plots each value with the current date.
LabVIEW 8.2,8.6,2009...still learning
Attachments:
Date Plot.png ‏16 KB

HP 932C PRINTER DOES NOT WORK OVER A NETWORK WITH TWO DIFFERENT OPERATIONAL SYSTEMS.

I have a 932c HP printer connected via USB to a Windows XP desktop computer (Dell E520), which is part of a home network.
I also have an HP Pavilion dv5 notebook, running Windows Vista Home Premium 64-bit, connected to the same network. This notebook can find the printer over the network. However, when I try to capture the 932c printer, the following dialog box appears:
"The server for the `hp deskjet 930c series` printer does not have the correct printer driver installed. If you want to search for the proper driver, click OK. Otherwise, click Cancel and contact your network administrator or original equipmente manufacturer for the correct printer driver."
When I click OK, another dialog box appears:
"The file `*.INF`on (Unknown) is needed. Type the path where the file is located, and then click OK."
However, I can't find any workable *.inf file in the HP notebook Hard drive (both partitions).
I have already tried to download the driver from the HP website, but it says that Windows Vista already has the driver for such printer! Well, now I'm stucked!
I'd like to point out that the printer works fine if I plug it directly to the HP notebook's USB port. But I want to operate the printer via the home network, keeping it hooked to the Windows XP desktop computer.
How to solve this problem? Thanks.

This is the HP notebook forums. I would recommend posting this in the printer forums for better coverage.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

Stacked bar chart with single group

Post Author: rt50896
CA Forum: Charts and Graphs
Dear all,   I have a question about stacked bar chart with one group value(normally more than one group value is ok)   ex. YYYYMM      PRODUCT    AMT        -
        200601          ABC            1000        200602          ABC              300        200603          ABC              500       .....   the data collection is as above,then chart display: x-axis as YYYYMM,y-axis as PRODUCT...   but why this case the bar chart color not the same for each YYYYMM? and legend not display one PRODUCT as ABC only?   the bar chart display like this:   http://tkfiles.storage.live.com/y1po30C7CH6eW9phoLAXH89MBGwFLYdEZ3kOMQXUQzDzwM-VNnffibEwqPI8TIUNBm1f7uKTjnkaOI   ps. crystal report version is 8.5Regina

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Stacked Bar Chart with Multiple Series Sort Question

Hi,
Apex version 4.1.1
I have a stacked bar chart with three separate series, one showing customer effort, another showing project effort and the third showing other effort, summarized by calendar week. The x-axis of the chart is the calendar "week of" date, and the y-axis has a bar for each of the three series. Not every type of effort occurs every week.
When AnyChart renders the chart, the order of entries on the x-axis seems to be dependent both on which series are present in a given week as well as the "week of" date. Weeks with all three series sort in order by calendar date, followed by weeks where just the 2nd & 3rd series are present, followed by weeks where just the 3rd series is present. See this [url http://tinypic.com/r/b9zdt/6] picture of the chart noting the "week of" dates. Note that the months go Sep-Oct-Nov-Aug-Oct.
Is there a way to force AnyChart to sort the x-axis in chronological order regardless of whether there is data for all three series for a given week? I have looked through the AnyChart XML reference but cannot find a way to do this.
Incidentally, I can solve the sorting problem by combining all three series into a single query:
select
null as link,
week_of as label,
sum(customer_effort) as "Customer Effort",
sum(project_effort) as "Project Effort",
sum(other_effort) as "Training, Admin and Other Effort"
from ...But if I do this, I cannot figure out how to have each bar on a given week link to a different detail page, e.g., if I click on a bar representing customer effort I want to link to one page, but if I click on a bar representing project effort, I want to link to a different page. I have had a look at the [url http://apex.oracle.com/pls/apex/f?p=36648:59:1570983160946101::NO:::] chart examples posted on apex.oracle.com, but cannot figure out how to apply to multiple series in a single query.
Thanks,
Mike

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Final Cut 6 and Color does not work

Hello,
I bought FInal Cut Pro Studio 2 and i receive the suite today and instal only apps ( no contents and loops )without problem
Tried to open FCP6 and Color but not working.
i launch FCP 6 or Color,2 jumps on dock and then quit.
can be memory problem.( i have 768RAM on my imac G5 64VRAM)
any pacth to resolv this problem?
ps* SountrackPro 2,DVDStudio Pro,Motion3,LiveType,CinemaTools and Compressor woks fine in the same computer
Computer configuration
IMac G5 1.6 with 64VRAM and 768RAM
thx in advance

Ok,forgot Color,but and about final cut 6 ? why does not work?
max resolution 1440x900.
i was looking the systen requirements on fcp page
Minimum Requirements to Install All Final Cut Studio Applications
Final Cut Pro 6
Macintosh 1.25GHz or faster PowerPC G4, PowerPC G5 = OK
1GB of RAM = NO,my iMac have 768RAM
1024-by-768 resolution or higher OK
Mac OS X v10.4.9 or later OK
QuickTime 7.1.6 or later OK
A DVD drive for installation OK
Can i deduce that problem is because i don't have RAM enought?
THX

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!

You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again

Color Highlights not working in bar chart with two data points

Similar Messages

Maybe you are looking for