Color HP LJ CP3525N printing slow on network for one but not another

This one hasn't been touched upon that I have notced. I currently have a Color LaserJet CP3525N setup on Server 2003 R2 with PCl6 drivers being used. This just started occuring for people on the same subnet as this printer. The print jobs go very slow and print a single page about ever 3 minutes. If I print to the printer with the same drives setup from the same server it prints with no delay. My system is a Windows 7 64 bit and the other systems are also Windows 7 64 bit as well. Before this week it was printing for many months with no problem. This printer is used quite often and I am now being stopped from my daily work and having to have the files emailed to me to print. I have searched other forums and threads and notbody else seems to have this issue. I have stopped and started the printer spool on the Server and that didn't make any difference. The server it is on is the main one we use to share out all of our network printers. Any thoughts or ideas? I have also replaced the 4 toners to see if that resolved anything as suggested by others and still not dice at this point.
Thanks in advance,
Marcus

Did a fresh install and still having the same problem. Giving up now. Mod can now close this thread

Similar Messages

Very slow wireless connection for me but not for others

I set my 12" powerbook next to my girlfriend's PC notebook and ran an online speed test on each of them. She gets a download speed of about 3mbps. I get a top download speed of about 200kbps. Why does my powerbook get only 1/15th the download speed that she does?
Thanks for your answers.

Are they both on the network at the same time? If one computer has heavy use of the Internet connection, other computers later on may not get as much of the available bandwidth.
Which speed test did you use? I use this one.

Able to install canon bluetooth network for imac, but not on macbook?

I recently purchased the canon mx850 with the canon bu-30 bluetooth adapter. After a little work, I'm able to get the bluetooth to print successfully from the imac using only the bluetooth connection. The secret came when I selected the printer driver to use the CANON IJ connection rather than the default Canon driver connection.
When I've tried to duplicate exactly what I did on our macbook, the CANON IJ driver doesn't appear. I have only one driver option and that option results in an error message when I try to print.
Any hints as to what I do to get the CANON IJ option to come up when I'm going through the process on the macbook?
Thanks.

Care to share how you fixed this? I'm having the same problem.

I got unlock code from 3 network for n70 but not ...

I have n70 got the unlock code from 3 and entered it many times but does not work , i heard that phone becomes lock after 3 times... so what can i do now?
i am sure i have the correct code...
thanksMessage Edited by tarrooka on 17-Jan-2007
06:36 PM

U will need to have the fone flashed to open it back up to use ure unlock code again
Nokia Lumia 520
 iphone 6 Plus.
Be happy !!

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

HP Officejet Pro 8500 prints slow with Lion. One page every 1.5 to 2 min. Apple support offered no help and HP unable to help. Any suggestions?

HP Officejet Pro 8500 Wireless prints slow with lion. One page every 1.5 to 2 min. Apple support and HP no help. Any suggestions?

Although printer is wireless capable I have it connected directly to iMac via USB to help with speed. I just completed resetting printer and reinstalling to no avail, still approx 2 min to print one page.

HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?

I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour. Is that correct?
paul.kelly

Hi Steve,
No expert, but since nobody else has piped in...
Did you setup the DNS Server IP?

How come I can print off the Apple support page but not of my note book i n documents.

How come I can print off the Apple support page but not off of note pad in my documents.

No. It is not free unless the phone was originally purchased less than 90 days ago or you have an active AppleCare agreement.
Where did you get the phone? This is almost always a symptom of a phone that was hacked or jailbroken to unlock it.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

GACU,
OK, now I think I understand your problem.
If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

Can't print with adhoc network for HP 7780 all-in-one

Operating system is Windows Vista 32 bit.
Downloaded full driver software from HP site and installed it OK with wired connection to printer. All works fine in this mode.
Now I want to do wireless printing via an adhoc network called MYNetwork that I generated on my computer with WEP security. The printer detected the network, I put in the 5-digit password on the printer control panel, and the network was then connected. It shows connected on my computer also.
So now I am connected to the adhoc network, what are the next steps to make the printer show "online" and to actually print wirelessly? I really feel dumb asking this, as the answer must be simple. PLEASE Help!!
Note that I have completely disconnected the wired connection from the printer to the computer.
Thanks,
Garry

1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet 6500A Plus Suddenly only prints red for most but not all occasions.

In the middle of printing a report it switched to RED ink. I bought and replaced black cartridge... though it still had ink. (NO SUCCESS) It prints BLACK for copies, for documents on Pages (I Mac) and from wife's laptop that is connected. SOMETIMES IT PRINTS BLACK when I click on PDF and Print.... but not all the time. It ALWAYS PRINTS RED when I print an e mail. No TROUBLESHOOTING suggestions seem to fit this irregular problem

PDF's are typically send to the printer as graphics, which may cause them to be printed with the color cartridge rather than black. If your cyan cartridge is low (or not working) the print will appear red. To address cyan not printing properly the document here may help.
Depending on your OS you may be able to set the printer to print in Grayscale and Black ink only.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Itunes slow switching tracks on mp3 but not on m4a files?

Itunes is slow (1 minute) switching tracks on mp3 files but not on m4a files. I can't figure out why. My music files are on a network (NAS) drive. When I change tracks between m4a files, I get quick changes between songs (couple seconds). When I change songs on mp3 files, I notice the network spikes usually in 3-4 spikes over about a minute, and then the song starts. Itunes is hanging during that time. If I start a file from the local machine desktop, I see the same spikes. The computer was freshly reinstalled this week, so new itunes install. Also tried reinstalling. I have a second computer on the same network that I tried to duplicate the problem, and that computer works fine on mp3 and m4a song changes. Uses same version of Itunes 10. Both machines are XP service pack three and a good amout of RAM and run fine with all other programs, so no virus, etc.

I am having the exact same problem. It's maddening. It's happening to all of my computers (all Windows 7) and my Apple TV (using Library sharing). My whole iTunes library is stored on a Buffalo terastation NAS drive. It's been this way for years and I've never had a problem. Until you mentioned it, I never noticed that is was an MP3 vs AAC thing.

Wireless printing works with 10.5.1 but not with 10.5.8 - help?

TIA
In 10.5.1 adding my HP printer and printing wirelessly to it was no problem. I upgraded with the Combo 10.5.8, used the printer set up procedure and my printer does not show up in the printer window.
I now wireless print to my HP printer by booting up in 10.4.11. I.O.W., it is not my HP printer.
I have searched the net for similar problems and did not find any. I have downloaded and installed, again, the HP drivers.
In 10.5.8, I can see and select the Adobe PDF printer and, in the printer setup window, I can select my HP printer driver (I.O.W., the driver is installed). The Adobe PDF printer works.
Leonard

nycL45 wrote:
the cat 5 cable is plugged into the printer's ethernet port with the other end plugged into the ethernet port of the ISP's wireless router. Two computers are hardwired from this router. This laptop uses the wireless.
Hi Leonard,
Your printer is indeed connected via Ethernet and your wireless router provides the wireless capabilities to your MacBook Pro. (That is, your printer is NOT a wireless printer.) This is exactly how my network is setup as I stated in my post on February 26.
Here what I suggest...
Print a test page from the HP 4MV printer as follows:
(a) Press the On Line button so the light goes out
(b) Press the Menu button until the display shows TEST MENU
(c) Pres the Item button until the display shows SELF TEST
(d) Press the Enter button. The display will show 06 PRINTING TEST and after 30 seconds, the test page prints
The test page will show a boxed section. The third column is TCP/IP information and should show the printer's IP Address (ex. 192.168.1.xxx), subnet mask (255.255.255.0), and gateway (ex. 192.168.1.1). The gateway should be that of your router and the first three sets of numbers of the printer's IP address are the same as the router.
Now, put the printer back On Line.
Add printer using IP with the LPD protocol (This is for Leopard but should be similar with Snow Leopard)
Launch System Preferences and click on Print & Fax
Click the plus ( + ) symbol
Click IP
Protocol: select Line Printer Daemon – LPD (click for a pop-down list of options)
Address: type in the IP address shown on the printer self test page
Queue: you can leave it blank
Now, the system will look for the IP and find a corresponding match PPD
If everything is correct, click the Add button.
(In my case, "Name" automatically fills with the IP address that I input for address and "Printing Using" auto finds a PPD for my printer. I also have an additional setup for my HP 4MV using a third-party PPD and in that case, I manually "Select a driver to use” by clicking on whatever the system automatically selected.)
BTW: You may want to take a look at what print guru, Greg Sahli says in another thread at
http://discussions.apple.com/thread.jspa?threadID=2117938&tstart=0
Hope this helps.
~L

Color HP LJ CP3525N printing slow on network for one but not another

Similar Messages

Maybe you are looking for