Color/hue from photos exported out of LR to PS then saved get adjusted

When I send my photos direct from Lightroom 5.6 to Photoshop 2014.1.0 and then save to .jpeg to HD, the hue gets adjusted in some cases (it's ok when I view photo full size in external viewer e.g. ViewNX2, but the thumbnails previews and images loaded to the web get adjusted).  I'm sure it's a color space incompatibility issue, but not sure how to fix?  Attached are screen grabs of the two settings.  Any ideas?  Thanks, Jim

You're sending ProPhoto RGB to Photoshop. ProPhoto is a very large editing color space, but usually not a good output color space. It's fine inside Photoshop, but usually breaks down in file browsers and web browsers. It requires a fully color managed application to display correctly.
Always convert to sRGB for anything destined for web or other non-color managed use. sRGB will display roughly correctly everywhere.

Similar Messages

  • Taking photos with my iPhone5c color shifts from photo to square

    When taking photos with my iphone 5c ios7 I notice the color shifts from photo to square. The color changes are noticible. I have auto focus on, flash off, on both formats I click on the image to get exposure and focus and take the photo.

    Hi Rick,
    Thanks for visiting Apple Support Communities.
    If the colors look different when you take pictures in "photo" and "square" mode, make sure that there are no filters being used:
    Apply a filter:  (iPhone 4s or later) Tap the filter icon to apply different color effects, such as black & white. To turn off a filter, tap , then tap None. You can also apply a filter later, when you edit the photo. See Edit photos and trim videos.
    If you are seeing unexpected results when taking pictures with your iPhone 5c, these troubleshooting steps can help:
    Camera isn't functioning or has undesired image quality
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find the article with these steps here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    All the best,
    Jeremy

  • Color changes from FCP to Quicktime to Youtube

    I'm editing on FCP7 and I add color correction but then the color changes once I export to quicktime conversion. And then it changes again when I upload it to youtube.
    I'm editing on Apple ProRes 422 1920 x 1080. I export with quicktime conversion to h264 same dimensions. Please help me out thanks!

    The color will change. This is due to many factors, like the Canvas in FCP not being color accurate, so it won't match a QT file that you export if you do it with the same settings as the sequence. But it REALLY won't match if you compress it in any way, as compression means information is removed to make the file smaller.  Color information.
    Here...look at my second to last post on this thread for a reason for all of this:
    https://discussions.apple.com/thread/4903886?tstart=0

  • IPhoto won't import new photos from Photo Stream.

    Hello,
    iPhoto won't import new taken pictures from Photo Stream. When I disable and then re-enable Photo Stream, all pictures will be imported to iPhoto. But when I take some more pictures, these won't appear in Photo Stream (until disabling/enabling Photo Stream in iPhoto).
    Anyone with similar experience?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

    Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

    Jai141 wrote:
    ... and im not sure as i brought the phone of someone else..  i will have to ask them
    Good Luck.
    Jai141 wrote:
    Thanks
    You're Welcome.

  • HT201250 How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any idea

    How do I restore photos from Time Machine?  All of my photos have been imported within iPhoto and therefore are exported to Time Machine via an iPhoto file.  I can't figure out how to break individual photo files out of the iPhoto file.  Any ideas?

    You might post this query on the iPhoto forum and perhaps someone there can provide an answer.
    I tried this on my MBP and it seems that you have to restore the entire iPhoto Library.  What I did was put the current library in a separate folder on the desktop and then I restored the library from a prior date.  If you were to do that, you then could extract the desired photos and then delete the restored library.  Then place the current library back to the original location and import the desired photos.
    Not tidy but it seems it will work.
    Ciao.

  • How to export photos from photo gallery to my iPad

    How to export photos from photo gallery to my iPad

    I had no trouble finding the "Export" tools in the "File" menu. They are greyed out when no photo is selected, but they are functional after selecting one or more photos.
    I agree that it would be nice to have the "Reveal in Finder" option back, but they probably don't want us mucking about inside the Photos library structure.

  • RGB color in inDesign changes (washed out) after exporting it to PDF

    Hi,
    I am new to InDesign and i have a hard time figuring out how could I export my InDesign file to PDF without affecting the color.
    This is what I do.
    1. I created a new document with Transparency Blend Space set to Document RGB
    2. I created a box using the rectangle tool and filled it up with RGB color, R=126 G=12 B=110
    3. The color in Indesign is just how i wanted it, however, the problem arises when i export the file now to PDF
    4. Instead of the color i wanted, the color was changed to a lighter color, or washed out.
    5. THis happens even in text have the same RGB setting.
    How could I export it to PDF with the same color, without being washed out?
    I really appreciate your help on this. Thanks.

    That sounds like the Color Picker, which works a bit differently in ID than in Illustrator or Photoshop. If the cursor is not in one of the RGB fields when you say OK you won't get RGB color. You can see this by noting the text in the Add ... Swatch button. My guess is you added the color as the CMYK conversion which is a bit lighter.
    You might want to use the panel menu in the Swatches panel instead, or the new swatch button at the bottom of the panel while holding down the Alt key to open the new swatch definition dialog. You want to create a Process color and change the type to RGB, then enter the values in the RGB fields. Or if what you want is really Pantone 249U you can define a Spot swatch and choose Pantone Solid Uncoated and then specify the 249. I'll warn you though, that CS6 uses Lab values for displaying spot colors and 249U is considerably lighter than either the RGB you specified or the 249C. In earlier versions the book value conversions were used. Even when using Lab display values through Ink Manager in CS5, the coated and uncoated swatches incorrectly look the same in ID, and in Illustrator CS5 you would need to turn on overprint preview to see a difference.
    Here are a couple of screen captures from PDFs exported from ID CS5 and CS6 using High Quality Print. The colored boxes with the lables were pasted from Illustrator CS5 to be sure I was using the same color definitions and that theywere behaving as native objects. Below are the same boxes placed:
    and here is how the screen looked in CS6 in ID (notice the difference in the placed .ai file -- the screen preview is NOT using the Lab values, although it exports with them):
    I don't know what the content is and how you present it, but it doesn't sound like a web page. That said, if you choose Web for intent in Document Setup you can still use print size paper sizes for the document and change the rulers after the doc is created to read inches or millimeters or other units of your choice instead of pixels and the file will use default RGB swatches and default to RGB when making new colors.

  • I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

    I'm trying to make a slideshow in iMovie, but when I upload photos from my Aperture Library into the iMovie Photo Browser, some photos (305 out of 427) are missing. How do I get iMovie to upload all of them?

    I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
    Here is the work around:
    Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library.

  • PSE 8: Color Tinting from Black and White Photo

    Basically, the title says it all.  Can someone tell me how to add areas of color in a black and white photo for PSE 8?
    I really appreciate it.

    Using Hue Saturation won't colorize my whole picture?  What if I just want to color a hat?  I mean, I know about hue/saturation and I know how to colorize.  But, how do you do it for something specific within that picture and leaving the rest black and white?
    Select what you want to colorize and then apply the colorization methods. You might want to first feather the selection 1 or 2 px to get a soft edge. As to Barbara's first method (painting on a blank layer with Color blend mode), the color tends to be washed out. If you want a deeper color, duplicate the layer and set its blend mode to Multiply; if the result is too dark then lower the duplicate layer's Opacity.

  • What has happened to the export from Photo Stream option in iPhoto?

    Until very recently I was able to export items from Photo Stream in iPhoto my Mac. Abruptly this option seems to have disappeared, and is now greyed out. Anyone got any idea why? Thanks in anticipation?

    The borders and themes have been discontinued.
    If you want them back, send a feature request to Apple:
    http://www.apple.com/feedback/iphoto.html.

  • When exporting out of lightroom the color of my picture channges significantly

    I use windows 8 and tried exporting out of lightroom through firefox and this did not help either

    Hi Shmuglak.  Thank you for the information.  I tried those things but did not work.    I just got windows 8 and just downloaded photoshop CC and Lightroom from the cloud.   My settings in Lightroom under preferences are :   Under jpeg preview it is checked on fast load data.   Under external editing the color space is prophoto.   Under additional external editor it is set to preset (Custom).  Under Default Develop Settings the only thing checked is apply auto mix when first converting to BW.   Under export module:   Location:   set to same as original folder and no check mark on add to catalog.   Under Post Processing I have tried do nothing and tried firefox.    
    It is funny that when I export a picture from lightroom using firefox that picture  pops for preview and the picture looks fine but then when I go to my email and try to email that same picture and use send with a file attachment the picture looks aweful on my desktop but when looking at it on the ipad or iphone the picture looks fine.
    Any other suggestions would be great
    thank you
    Date: Thu, 12 Dec 2013 00:56:36 -0800
    From: [email protected]
    To: [email protected]
    Subject: when exporting out of lightroom the color of my picture channges significantly
        Re: when exporting out of lightroom the color of my picture channges significantly
        created by shmuglak in Photoshop Lightroom - View the full discussion
    I don't know if this is your case but I have a similar problem (and has been helped out by some kind soul on this forum). The change of color may happen if you are re-importing the exported pictures into the Lightroom catalog. If this is what you are doing, some import presets may be applied and this may cause the color change. I'm talking about this setting, sheck if it is enabled. If it is, disable it and see if it helps.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5923235#5923235
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5923235#5923235
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5923235#5923235. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Photoshop Lightroom at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why are my photos desaturated when I export out of Lightroom 5 and editing with VSCO Film filters?

    I have been excited working with VSCO Film presets, however when I apply them and go to export out of Lightroom 5 on my Windows 8 computer, my images are previewing very desaturated and muted in color. Some images are below. I thought it was a Color SPace issue, but when exported as sRGB as well as in its original space of Adobe RGB1998 it is still desaturated. Any help?? In Lightroom the colors are right, but my preview application is different.
    Thank you!
    JPEG
    Screenshot of Lightroom preview on Left and Pictures preview on the Right.

    Hi ssprengel,
    Here's some clarification:
    Here's a screenshot of my raw image in lightroom without any presets:
    Here is a screenshot of my raw image with the presets (the way I want it to look upon export):
    Here is a of the jpeg exported out of LR:
    (on my screen the jpg looks like what it should when I attach it, but I know once I post this it will not look like it. That's something I noticed when I posted my question previously)
    I took you suggestion and re-imported the sRGB exported JPEG and it looks like how it is supposed to be with the correct saturation. Here's a screenshot of the jpeg reimported.
    Here is a screenshot comparing the LR5 preview to the Photos preview on Windows 8. The LR5 (left) is more saturated, the correct way I want it:
    I cannot use Windows Photo Viewer because this is how my photos look like in it:
    Hope this all makes sense! Thank you so much in advance!

  • Exporting Vids from Photo Booth

    I'm not sure if this is the correct discussion venue so please redirect if it should be posted elsewhere. I'm trying to email videos from Photo Booth. I used to just click email, Mail would pop up and the videos would go out. Now it says the server cannot handle it. I've tried to export it to the desktop and email it but it goes out as a photo not as a video. When I export the gif file it says it is a video but in reality it is not. Is there a help section for this? The videos are less than two minutes. It used to work just fine it's confusing. Thank you. Tami Stewart

    From what I could understand, you took at 4 photo picture and want to export it without the effect. This is an Apple limitation which we have no control over (we do not work for Apple). I suggest retaking the photo without the effect. That is the best I can do. Sorry.

  • Subjects' faces look red from export out of Motion 4

    Hello,
    I am using Motion 4 and FCP 7 for a video project. When I export out of M4 into FCP 7, the subjects' face look reddish. I originally exported from FCP 7 into Motion 4 and added text and other graphics. When loading the video exported from Motion 4, I am having problems with the red faces. Any suggestions? Would appreciate your feedback.
    Thanks,
    Mike

    This is a part of Final Touch that was lost when it got married to FCP as COLOR. The issue you now have is that COLOR doesn't actually create export lists, it modifies existing XMLs (and cut-lists) that are created at the time of SEND To... from FCP. I'm gathering you did a form of CMX 'import as cut-list' to get the media and event/clips into COLOR. And then there's no apparent way out.
    If its a CMX-flow, it was probably a V1-only list, all cuts. If all the material was rendered back to 10-bit Uncompressed, then that media exists somewhere, all neatly tucked into individual folders numbered corresponding to their order in the cut list. In the old days, we would do a FinalGather which would herd all these clips into either a reference Quicktime or a folder where the clips were exposed in such a way that you could grab them all and drop them onto a Final Cut sequence. There are some automator scripts laying around here and there for pulling all the clips into a single directory... it'll take a bit of searching, or you can create your own.
    If I'm on the right track with this, creating a new FCP timeline with the rendered media is as simple as selecting them all and dropping them on a new sequence, since they are oriented with names like 1_g1.mov, 2_g1.mov, and so on. Search for those with Finder if you haven't already, and then you'll know what to do. The tough part is that they, each individual clip, are all imbedded in their own folder which makes it a beeotch to wrangle them as a collection.
    jPo

Maybe you are looking for