Color issue in AE cs4 please help

hi, i am in after effects, i color correct a clip in color finesse,
and later i export the clip as a quicktime H264 mov file, and i notice that when i play that quicktime mov h264 file in the quicktime player outside of after effects, the contrast looks less, more washed out than it looked in after effects,
in after effects all looked more contrasty and intense, and then the exported file looks weaker, is this a problem of my settings in after effects? of the quicktime player? of the color management settings? (which i leave turned off), of the initial color space and gamma i picked in the raw settings?
i use AE CS4,
color management is turned off
the footage im working with is RED Camera footage, R3D, and i use color finesse 2.1 for the color correction,
OS is windows vista
thank you very much for any advice jav

thank you very much for your answer, i havent tried that, where is that legacy gamma box? where can i find it to disable it?
thank you again
jav

Similar Messages

The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help!

The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Plugin issue with CS4 - please help

I'm trying to open a InDesign CS4 file and I get a "Cannot open file, please upgrade your plug-ins to their latest version or upgrade to the latest version of InDesign." I did the InDesign upgrade but I can not find anything on upgrading plugins. Plus what's really weird is it is saying it can not find all the Adobe pluging and I have all of them loaded.
Please help!!!

It's a CS5 file, most likely.
Bob

Issue With Adding Layers - Please Help!

I am having an issue where Photoshop is not allowing me to add any kind of new layer to images that I'm editing. It won't allow it while it's a .NEF or after it's become a .PSD. If I open an image that already contains layers and is saved as a .PSD, then it allows me to add layers no problem. If I start a new blank document it will allow me to add layers. It's just not allowing me to do it with files that have been imported within the last week. It doesn't seem like a system resource issue since it allows me to add layers to older files. If you have any thoughts on this please help!
I am running:
Adobe Photoshop Elements Language Version: 8.0.0 (8.0 (20090905.r.605812))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:6, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 2
Processor speed: 2100 MHz
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD M880G with ATI Mobility Radeon HD 4200
OpenGL Drawing: Disabled.
Video Card: AMD M880G with ATI Mobility Radeon HD 4200
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Driver: atiumd64.dll,atidxx64.dll,atiumdag,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Driver Version: 8.632.0.0
Built-in memory: 3838 MB
Free memory: 1801 MB
Memory available to Photoshop: 1619 MB
Memory used by Photoshop: 60 %
Image cache levels: 4
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 453.9G, 64.8G free
Primary Plug-ins folder: C:\Program Files (x86)\Adobe\Photoshop Elements 8.0\Plug-Ins\
Additional Plug-ins folder: not set
-Tony

Well... sort of fixed it. Apparently my system doesn't like editing images with a color depth of 16bit. If I convert it down to 8 when I'm converting it from RAW, then it allows me to add layers... Is this normal?
Thank you for your time,
-Tony

Firefox constantly freezing due to issues with Flash. Please help.

I was running the firefox 20 beta (and have been for a while) when in the last few days, suddenly any time I tried to open any site that used even the slightest amount of flash, the browser would freeze for minutes on end before finally releasing a "plugin error" type message about Shockwave Flash. If i clicked 'continue' it would stay frozen. If i clicked 'stop script' then sometimes it would fix it, but most of the time it would keep freezing and showing that same message over and over until I stopped the process in task manager.
First I tried to update flash and shockwave- both are up to date. So i decided to delete the files themselves and the programs via add/remove and reinstalled them. Still did not fix the problem.
Next I tried to do a reset firefox to default state. This didn't work. I tried doing it again with the flash files deleted/uninstalled AND I rebooted the computer and the problem still persisted.
Finally, I tried to downgrade to a more stable version of firefox, so I downloaded 19 and it still didnt work. Tried the uninstall/re install for flash one more time and nothing.
At this point, I cannot access about half of the pages I usually go to on the web and I need help here, please anything will do.
One thing that I noticed that might be helpful is that no matter how many times i uninstalled or reinstalled flash, every time it would try to run, task manager would show two instances of it, each using different amount of memory.
again, please please help. If there is any solution short of a total wipe it would be greatly appreciated

hello, maybe it's an issue with the protected mode in the flash plugin - you could try if [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] makes a difference.

How to change background color in a window? Please help.

Please help me to set background color to my window that includes some panels components.
I have tried
content.setBackground(Color.green); and
frame.setBackground(Color.RED);
but nothing works?
Please what should I change in my code? Thanks already in advance for helping!!
Main parts of my code:
public void addComponentToPane(Container allComponents) throws IOException
definePanels();
allComponents.setLayout(new BoxLayout(allComponents, BoxLayout.Y_AXIS));
allComponents.add(panel_introduction);
allComponents.add(panel_n);
allComponents.add(panel_resultTitle);
allComponents.add(panel_w);
allComponents.add(panel_testing);
allComponents.setVisible(true);
public static void main(String[] args) throws IOException
try {
GraphicsDevice device;
Container content;
JFrame frame = new JFrame("ImageOrder");
device = GraphicsEnvironment.getLocalGraphicsEnvironment().getDefaultScreenDevice();
device.setFullScreenWindow(frame);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
SwingApplication app = new SwingApplication();
content = frame.getContentPane();
content.setBackground(Color.green);
app.addComponentToPane(content);
frame.setVisible(true);
finally {
System.out.println("helle");
}

import java.awt.Color;
import javax.swing.*;
class Test extends JFrame {
     public Test( ){
          getContentPane().setBackground(Color.RED);
          pack();
          setSize(500, 500);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
     public static void main(String[] argv) {
          new Test().setVisible(true);
}

Issue about jsp taglib,please help

Hello all,
I want to use jsp tag like following:
<c:import url="xxx.jsp">
<c:param name="xxxAction" value="<portlet:renderURL/>"/>
</c:import>
and the value of the c:param can not accept the value generated by the <portlet:renderURL/> tag.
I can resolve the issue by writing java code in the jsp(like ...java code...<c:param name="xxxAction" value="%=...%"/> ),much java code occur in the jsp,I do not like this solution.
anybody has good solution please help me.
thanks and rgds.

Ram is correct. You can't nest custom tags as attributes to other custom tags.
In this case the <c:param> tag offers the option of specifying the value as the body of the tag though, so the following should work:
<c:import url="xxx.jsp">
<c:param name="xxxAction"><portlet:renderURL/></c:param>
</c:import>

Color Code is not working, please help

I am using the color code 080808 from adobe photoshop as my background for my template. When i put the JPG file into dreamweaver and try to set the page properties in dreamweaver (background) to 080808 it is putting me at pure black. please help me.080808 is not a pure black its a shade of it. I need a color code that matches 080808 correctly. thanks
I am using adobe CS3

I'm not quite sure I understand exactly what you are doing, but I ran into something like this myself. I was creating GIFs in Photoshop -- type on a background color. I then created DW pages. I used the same color code for the background color in PS and again for the background color in DW, but when I inserted the images in the page, they did not match. It turned out that when I created a new file in PS, I was creating it in my default color space, Adobe RGB. I assumed that when Save For Web converted the file to sRGB, the colors would convert perfectly. What I found is that I should have been creating my PS files by starting with a new file in sRGB color space. Once I did that, the background color of my images identically matched the background color of my DW page.
Hope this helps.
John

Major Issues with iPod Touch - Please help!

Hi, I am having major issues with my iPod, and nothing seems to be going right. It all started a few days after I got it for Christmas. I would wake up, and my iPod would be completely discharged even though it had a full battery and was turned off. I woke up one night and found that it came on all by myself. I sent it into iPod, and they sent it back saying nothing was wrong. Since I got it back today and within six hours, I have had four software crashes to the point where I have had to uninstall iTunes and restore factory settings four times. I am now on my fifth crash, but this time, the screen won't even come on. It keeps saying that it is in recovery mode. I simply went to turn it on! Does anyone have any suggestions? Personally, I think there is a short, and that I need a new a replacement. However, it doesn't seem like Apple is very supportive of the idea. I go through all of their steps over and over and over, and the same thing happens! What is going on? Please help.
Marie

sounds like, for the charging problem anyways, that you are just putting ipod into "Stand by" mode... press and hold the power key for about 10 seconds and an option to power off will actually come on.. if u just press it and let go, it just goes to stand by.. i have noticed stand by drains my battery
also, it doesn't sound like a short to me... the charging i am pretty sure is bc you are only putting it into standby however, the rest sounds like software.. did u try and restore using itunes or did you just reset the factory defaults?? Plug it into itunes and click restore under the ipod menu...
Message was edited by: Devin Stephens
Message was edited by: Devin Stephens

PC & MAC's on a network, disconnect issues, AT WITS END, PLEASE HELP!!!!!!

HI everyone...
This problem has me broken and utterly confused. I'm somewhat of a newbie to MAC, so I still have a PC my girlfriend uses that is wired to the router. She also has a gateway laptop w/ wireless card. I've seen the promised land and am the proud owner of a MacBook. The router is a Linksys WRTG54GS router, if that would help. The reason I bought the router is that it is noted as "very good."
I'm under suspician that it may have to do w/ Mac system updates...any ideas????
The only problem is when, the home network (with security or without) has the MAC on the network, the network breaks down after around 15-20 minutes. It works fine for that period of time, then in the wireless indicator on top, it always goes down to 4 bars, but the network is not accessible at all.
When it is only PC on the network, it stays up without any issues. I WANT TO USE MY MAC WITHOUT RESETTING MY ROUTER EVERY 20 MINUTES....PLEASE HELP!!!!!!!!!!!!!!!!!!!!
ps- I've updated the firmware and everything, to no avail, it doesn't work.

I had a similarly frustrating experience when setting up my Linksys WRT54GS wireless router. My new MacBook Pro would not connect to the Internet as it would not take an ip address from DHCP on the Linksys router.
The problem was that the latest firmware from Linksys for this router (1.50.9) is at fault. It is not compatible with Mac OS 10.4.8. In order to get things to work normally I had to downgrade the firmware of the router to version 1.50.8
You may have to hunt around the various Linksys forums sites to find version 1.50.8 as Linksys Canada would not provide it to me. I was told to use manually set ip addresses until a new firmware version was released. However, version 1.50.8 seems to be stable and working well for me.
There are similar problems with the compatibility of the firmware on the WRT54G Linksys router with OS 10.4.8 too, which also requires downgrading the firmware. Check the Linksys forums for more details as the firmware versions are different for this router.
Good luck!
Quicksilver G4, MacBook Pro C2D Mac OS X (10.4.8)
Quicksilver G4 Mac OS X (10.4.1)
Quicksilver G4 Mac OS X (10.4.1)

After update my iPhone 4 iOS to 4.0.1 my bettery gone so bad. Every 1% goes in every minute while browsing. Also system gone proper slow and 3G conectivity gone very poor. I really want to go back to ios 4.3.4 until these issue is resolved. Please help.

After update my iPhone 4 iOS to 5.0.1 the. Bettery gone so bad. Every 1% goes every minute while browsing. Also system is very slow and 3G. Connectivity gone very poor. I want to go back to ios 4.3.4 until these problem are resolved. Please help.

Just look around the forum posts. Your issue is the number one problem reported by users. There are many suggestions found, some work for some users, others do not.
Some users have reported no battery problems after the upgrade. Others have improved performance after upgrading to 5.0.1 from 5.0. YMMV.
Many of the posts offer suggestions about changing various settings - there are many that affect the battery life.
Once you upgrade the iOS on a device, you cannot go back to a previous version.

DW CS4 Please help me find my open files menu

I'm running DW CS4 off of my external hard drive that I booted up a 2009 MacBook Pro. The program is working but I cannot find the files window even though it's checked. Any thoughts? Please help. Thank you.

Hi todd85,
Can you try moving to a default workspace and see if it works?
Dreamweaver CS4 workspace video tutorial
Thanks,
Preran

Having many issues... Please help!

Issue number one. I was recently surfing the web, trying to find an off shore escrow company. When I clicked on a link and my computer started downloading "something". I immediately tried to stop the download, but now I'm getting spammed with a banner across the top of my Safari windows. It doesn't matter what site I go to, I keep getting the banner that states, "congratulations you've won, blah..." with audio! So annoying, because the computer voice keeps repeating it. "congratulations, congratulations". You get the idea.
Issue number two. Whenever I try to get into my system preferences, my pin wheel spins forever! As well as, when I'm using Safari. My computer entirely has been sluggish lately.
Issue number three. After the crazy download, I tried repairing my disk, but I keep getting this error. Now I know, there's been other threads on this issue, but I don't understand "their computer language". Here's the message I keep getting:
Error: The underlying task reported failure on ext
1 HFS volume checked
Volume needs repair
Now I have the two disks that came with my computer, but I don't understand what I'm suppose to do with them? Other threads tell me to reboot using the start up disk. What does that mean, exactly? Please explain, step by step what I'm suppose to do.
I'd also like to scan my entire computer (due to the mysterious download) for virus', etc. However, the apple threads only talk about virus via email, which doesn't apply to me. Please help me fix my t issues. Thanks for taking the time to read my frustrations. Your fellow mac user.

If you are getting an error that cannot be repair when running Disk Utility's Repair (not Verify), you can either get a tool like Disk Warrior from Alsoft to fix it -OR- you can back up your data, reformat the drive, and restore your data.
You can backup your data using a cloning program (such as Carbon Copy Cloner) to duplicate the entire drive to an external drive. If you do this, you can reformat and run the cloning process in the other direction to restore. Or you can just back up your user data, then after reformatting, reinstall the OS and apps "fresh" before restoring your data.
Disk Warrior - http://www.alsoft.com/
Carbon Copy Cloner - http://www.bombich.com/software/ccc.html

[solved]Waiting for UDEV .... and other issues. ARCH magi please help!

see what i did there? with "ARCH" mage? haha
Anyways........
Attempting an install and cant get passe the waiting for udev events to be processed phase.
-ASRock 890FX DELUXE3 AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
-AMD Phenom II X4 965 Black Edition Deneb 3.4GHz Socket AM3 125W Quad-Core Processor
- G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory
- COOLER MASTER Silent Pro Gold Series RS800-80GAD3-US 800W ATX 12V v2.3 / EPS 12V v2.92 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply
-Sony Optiarc Black IDE DVD-ROM Drive
- (x2) 250 gb hdd
Peripherals (tried with these unplugged as well)
- Saitek CCB437050002/04/1 Black USB Wired Laser Cyborg R.A.T. 5 Gaming Mouse
- Microsoft SideWinder X6 Black Keyboard Win USB
- Creative Fatal1ty Gaming Headset
I tried downloading other versions (releases whatever) and still no dice. It always hangs on waiting for Udev events.
The Net install gets further and asks for a password and user name ( trying the default root password isn't working, after multiple attempts returns me to login prompt).
I have various issues with other distributions as well here are some of the others I have tried so far:
Gentoo: hangs at Syslinux 3.86 2010-04-01 ebios line
Ubuntu: hangs after selecting boot/ install ubuntu
Arch linux: see above
Chakra: does not recognize anything no boot screen or anything just hangs at blinking cursor or boots into windows
PeppermintOS: hangs at SYS LINUX screen as well.
Please help me Arch linux wan kanobi you are my only hope!
Im lost... and am new to Arch linux though I have done allot of research on it and cant find an answer. I have been using linux for a while in the past, and have installed multiple distributions before without issue. The udev error is from a cd boot....
Last edited by 3picgillftw (2012-05-15 08:04:44)

I'm having this same problem, but the machine locks up for no less than 10 hours (I let it set all night). At the startup screen, it still shows "Starting udevd..." and remains there. I tried looking at the logs, but nothing gives any sort of indication of what is causing it to hang up forever. I don't have a Realtek (dmesg shows Intel(R) PRO/1000 Network Driver - 1.5.1-k). As I'm still struggling with Linux at such a low level, it would probably be best to wait for the fix.
BTW, Thank you to the developers, tech support, helpers, etc. etc. for Arch Linux and all their hard work/support, without which I would be totally lost and wandering aimlessly through a barren desert with a canteen full of sand and no direction in which to go and have no real meaning or purpose in life (a.k.a. using Windows).
In case this is helpful to anyone else:
ASUS Crosshair V Formula
AMD 6100 FX cpu
USB N13 Wireless-N adapter
ASUS GTX550 Ti
Corsair Vengance 16GB
Last edited by 12o (2012-01-24 21:48:57)

Major External Hard Drive Issues... Please Help!

Hey Everyone,
I own an Iomega Silver High Speed USB 2.0 Hard Drive 250 GB... I used to use it to store files for my old XP machine... and would now like to use it for my Macbook running 10.5.2 since my PC died.
The problem I have:
The drive does not mount on the desktop and when I go into Disk Utilities, it shows the drive as having 744.9 GB of space rather than 232.9 GB as it actually has.
Furthermore, I cannot "Erase" or "Partition" the drive because I get the error "Resource Busy". However, when I plug the drive into a Macbook running Tiger and try to partition the drive, the blue progress bar at the bottom jumps to 1/4 done and then does not move at all.
I have plugged the drive into a Windows XP machine and it cannot partition the drive properly either..
Please help! You guys are my last hope since I called Iomega... who say it is clearly NOT a hardware issue and referred e to Apple Tech support who did not resolve the issue and had me on hold for 40 minutes...
I beseech you, please help fix my hard drive... I don't need the data on it, I just need a hard drive that works as soon as possible...

Hi! "However, when I plug the drive into a Macbook running Tiger and try to partition the drive, the blue progress bar at the bottom jumps to 1/4 done and then does not move at all." If the disk is damaged (which is is) then the format would likely take 12-24 hours to complete so if you interrupted it it could have damaged the disk. I have a new disk that I never could get partitioned and is damaged beyond repair. Ok try this restart the computer with the disk off. Then turn the disk on and see if it brings up the message that the disk is unreadable and takes you to the disk utility. Also sometimes changing usb ports or trying to format it on another computer works. Tom

Color issue in AE cs4 please help

Similar Messages

Maybe you are looking for