Color Issues with Mini - DVI to DVI connection

Hello,
I just bought Samsung 2232BW. I thought it would be perfect for my both desktop pc and macbook (early 2006 version). In windows i could find the colors ok. But when i connect my mac to monitor with the dvi cable the colors are terrible. The colors are not matching with the macbooks lcd and montior. (greys are darker, green's are brighter.) i did find this post that says opposite of my words. (http://discussions.apple.com/thread.jspa?messageID=6984325) I tried for hours to calibrate the colors but i thought with the dvi cable connected montiors just a small calibration would be enough. Because of my job i cant ignore the color disorder at the view. Would there be a problem with my mini dvi - dvi converter? or should i buy the stuff that calibrates automaticly like "Pantone HUEY Pro"?
(I dont think the problem is because of the montior because i get quite good picture while my pc connected)
-korhan

Do you have the correct HDMI input selected in the TVs menu...?
Aditionally, there might also be settings for connecting a PC to the TV.

Similar Messages

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting the the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car

I just got the iPhone 5s, I have had a 4 for the last few years, my husband uses a galaxy. I have never had issues with any of our phones connecting to the cars Bluetooth until this one sometimes it will connect and sometimes it won't. I drive a gm car. A friend of mine drives an Acura and said she is also having the same problem? I have to connect the phone every time I get in the car.

Turn Off BT on your Phone & ReBoot..
Delete the phone from the vehicles memory..
Restart the Vehicle & go thro' the Pair set up..........

Issue with 2wire dsl router when connecting power pc g4 via ethernet

Issue with 2wire dsl router when connecting power pc g4 via ethernet. The 2wire will keep resetting. When I connect my macbook pro via ethernet to the 2wire all is ok, but as soon as i connect the power pc. . . .reset. I have emailed 2wire support. They recommended using a different patch cable. Tried that.. .. anyone else having this issue???? Any help would be appreciated. . .

Search the discussions for issues with 2wire dsl routers. This has come up before in a discussion I've been involved with, but probably not to do with the MDD. I do remember it being a design issue with the router, something that was done to it before dispatch.
Let us know if you can't find it and we'll have a look.
If you afford it, bin the 2wire and go buy something decent like a Netgear.

Noise on screen with mini DisplayPort to DVI adapter

I want to connect my MBP 15" mid'09 to the Samsung S27B970D monitor using mini DisplayPort to dual-link DVI adapter. I'm using Club3D CAC-1151 adapter for this, which looks like it was made by BizLink Technology.
There is an issue with this connection - from time to time the screen becomes noisy. You can watch a video with the same issue (with Apple adapter): http://youtu.be/GTSKp3xsMgs
There is stable reproduction steps - put computer to sleep and then wake it up. For several seconds the screen is ok and after a moment the noise appears. I found only one option to remove noise - system reboot.
I think that it's software issue, something in the operation system, it's drivers. As you understand from the video above the original Apple adapter is not free from such an issue too.
So, how it could be fixed?

Hi arabesc,
If you are having issues with the video output to your external display after waking from sleep (and possibly in other circumstances), you may want to take a look at the troubleshooting steps in the following article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Regards,
- Brenden

Resolution problem with Mini DisplayPort to DVI Adapter

Hi,
I have a unibody MBP 15', running on 10.5.8. I use 'Mini DisplayPort to DVI Adapter' (http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=Nzk2MDk5OQ) to connect to my external HP LP3065 30' monitor. I get max resolution of 1280 x 800 for external monitor which supports resolution of 2560 by 1600.
This monitor used to work fine with old MBPs, but not with my unibody MBP. What could be the problem? Adapter or MBP?
I am missing high resolutions
Thanks in advance!
Rohit

You have the wrong adapter. The one you have is single-link DVI, which does not support 30" displays. You need the Mini DisplayPort to Dual-Link DVI Adapter:
http://store.apple.com/us/product/MB571Z/A

Macbook pro(2008 later) can not recognise external monitor(NEC UXI2090) with mini-DP to DVI adapter with 9600GT

I bought mini-DP to DVI frome Apple several monthes ago and it worked well in that time until yesterday the external monitor show me no signal sign. Other PCs were connected with the same cable and monitor and they are fine. I am wondering there is something wrong in the adaptor or macbook pro. Furthermore I found the external monitor can display nornally when I switched to 9400 graphic card and used mini-DP to VGA adapter. If I switch to 9600GT no signal again. If I switch 9400 using mini-DVI, it is shown on the external screening: Out of range... In a word, In the mode of 9600GT, mac can not recognise external monitor(I can not detect it in the systerm preference even I press detect display buttun) and 9400 works in VGA mode. However when I connect adapter to mac, the screen showed blue flash.
I reseted SMC, no use; I created a new account or enter mac to safe mode, no use; so far I did not reseted PRAM beacuse of something wrong of my system. I am downlaoding Mountain Lion OS and will install it. Then I will reset PRAM and try again.
I do not know whether I shoud change the adapter or the single-link DVI cable to dual-link. Someone said it is useful in their condition. I tried some methods from BBS, such as connected when devices were off and then open, and so on. I failed.
Any suggestion for this problem?
Addition: OS: 10.7.4(Lion)

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Wifi connection issue with mini Ipad

Hi,
Problem with the new mini ipad. wifi connection is fine but when accesssing online streaming TV sites, it is constantly disconnect itself and have to reconnect to the site before I coujld stream it again.
I have other devices connected to the same router fine without any issue.
Ipad works fine with the same site and connection
laptops work fine.
iphones work fine
only the mini ipad is not.
took to Genius bar, nothing much was done. Called support line, waited hrs for someone to tell me to make apt with Genius bar.
This has becoming very annoying and disappoiting with Apple products since Steve J is gone.
any help is greatly appreciate it.
Regards,

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cinema HD Display 23" to 27" Imac 3,5 i7 with Mini DisplayPort auf DVI Adapter

Hi there,
I tried two displays and two adapters -
The screen looks milky and not clear !
What could i do ???
I am on 10.9.4
Best Dirk

Hi Dirk Michael,
Welcome to Apple Support Communities.
It sounds like there is an issue with the image quality on a Cinema Display connected to your iMac. Try calibrating your display as shown in the first article below, also use the second article to verify you're using a compatible video adapter.
OS X Mavericks: Calibrate your display
http://support.apple.com/kb/PH13768
Get help choosing Mac video adapters - Apple Store (U.S.)
http://store.apple.com/us/mac/mac-accessories/cables/cable-chooser#!
I hope this helps.
-Jason

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

2 Issues with Curve -- Camera and Application Connectivity

I'm having 2 issues with my Curve 8300. I tried upgrading the SW to 4.5 but it didn't help. Any ideas?
- The camera is no longer working. When I try taking pictures, it saves a JPG file but the file to the assigned folder but the file is smaller than it should be (usually ~6KB) and it doesn't render as an image.
- I'm trying to use an application (the NYT Crossword Puzzle) but it gives me the error message "Unable to connect to the server. Please try again later.", even though I do have connectivity for e-mail and web browsing. I tried adjusting the application permissions in advanced settings but it didn't help.
Thanks.

Hi and welcome to the forums!
As far as the camera I would try the following:
No data will be lost when doing the following: pull the battery while the device is ON. Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed, Thanks
If that doesn't work I would suspect a low memory condition please read this link:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14213&sliceId=SAL_Pub...
I do not have a definitive answer for the cross word. app. Could it be possible to test it off hours, to see if the servers at the NYT are in
fact busy?
Thanks
Please remember to resolve your thread. Put the check mark in the green box that contained your answer! Thanks
Message Edited by Bifocals on 11-07-2008 06:47 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Issue with Mini getting Self Assigned IP from recently purchased AEBS

I'm having a strange issue with the Airport Extreme Base Station I got got today. It can connect to the internet fine but it appears not to be assigning a network ID to my Mini. I can manually assign the proper IP Address & Subnet Mask settings but using "Using DCHP" yields an IP address of 169.254.x.x, a Subnet Mask of 255.255.0.0, and a nonfunctional internet connection. The situation occurs using both Ethernet & AirPort. My Vonage router seems to operate fine so I know the router is working otherwise.

Can you open the Airport Utility, and open the internet connection pane.
Yes
Make sure the connection sharing is set to: share a public IP address (this will turn on both NAT and DHCP on the AEBS)
Did that, no effect
This way, when the Mac is set to "Using DCHP", the IP address should be assigned to the Mac automatically.
Did that, no effect
But make sure you turn OFF the DHCP on the Vonage Router, there can only be one DHCP on a subnet.
Still trying to figure out how to do that on the Vonage router but I should point out when I powered down & completely removed the Vonage router and reset every other device on the network it made no impact.

Cintiq 21ux Color Issue with Snow Leopard

I just recently upgraded to Snow Leopard from Tiger. I have a Cintiq 21ux tablet that is noticeably "faint" now on the new SL. It appears hazy and the colors just don't pop like they did on Tiger. I didn't have this issue with Tiger. Does anyone have any ideas on how to correct the issue? I'm a graphic designer so color is EXTREMELY critical in my day to day operations.
I adjusted the gamma and that showed some improvement but there is still a dramatic difference between my Apple monitor and the Cintiq.
I noticed this was posted earlier but no resolution provided and it was archived.
Please help!

Something just occurred to me that has happened in the past that when I've upgraded the OS that the ColorSync profile that was previously selected for the Cintiq and/or my main display for whatever reason gets unselected. You may want to look in the System Preferences/Display/Color Tab to make sure that the color profile you previously had selected is in fact still there and selected. Make sure that "Show profiles for this display only" is unchecked so that all profiles are visible. More than likely it should be named something like Cintiq 21UX or Cintiq 12WX which was installed when you set up the tablet.

Issue with Smart View for Planning Connection

Hi All,
I'm facing this issue with Hyperion 11.1.1.3 & 11.1.2. I've created a connection in SmartView by giving the URL as http://ServerName:8300/HyperionPlanning/SmartView. After that i'm able to see "Servers" and when i started expanding that, it displayed the server name. When i clicked on the server name, it should display the Planning Application name right ? instead of that just a Cuble symbol is displaying. Do i need to make any settings for proper display of the Planning Application names ? This is perfectly working fine with HFM. I'm able to see HFM application names

Well, the thing I always forget and have pulled much hair out over is to add the essbase server access to the planning group.
Check on that, and I will loosen the rocks in my head to see what else I can suggest.
Robb

Should I buy a new MBP? (Lots of small issues with mine)

Hi,
There are a number of small but irritating problems with my MBP. Talking with a friend who has had her macbook into apple service 3 times now for replacements a lot more serious than my problems, I'm sure Apple won't replace the computer. A friend who has bought a couple MBPs now (later week version) has had very little problem with his.
Specifically, the issues I'm having are as follows:
1) CPU whine (I know this can't be fixed)
2) Fan "moo"/clunk. The computer sounds like a small helicopter at times and at the best of times is always noisy..
3) Heat issues - using the comp anywhere but on a flat surface (i.e. on my lap) and it heats up intensely. I know this is an issue with all computers, but compared to my powerbook it's night and day.
4) Lag Issues. Doing ANYTHING takes a "long" time. I need to reformat but from opening firefox to booting up the computer or even sometimes mousing over the icon tray.
5) Red headphone led. My internal speakers no longer work. I've read the problem has something to do with the headphone jack being stuck. Some fixes I've read include using a match stick, plugging in the headphones again (doesn't work).
6) My display flickers slightly now also. Seems to synch with the fan "moo"ing.
I'm using macintosh now because I like avoiding hassles. I switched from PC a few years ago after going through lots of issues and the powerbook was AWESOME. I'm assuming the macbookpro is going to eventually stabilize and work well also, is it there yet? Shall I buy a new one and just dump the current or will it be the same thing all over?
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Thanks for all the advice, it's appreciated. Particularly the advice to go down to the mac store and talk to a guru. I'm going to do that tomorrow.
I've been able to tolerate things up until the latest bug, the fan now periodically starts spinning like a helicopter. It's way beyond anything I've dealt with.. I can't listen to music it's so loud and it disturbs anyone else around (clearly needs a fix).
I can't send it in to be repaired as I can't do without a computer for that long. This said I thought to connect the new and old machine and copy the most important files over.
(No I won't dump this lemon on someone else without letting them know about the issues. It may well be worthwhile to someone willing to nurse it through the various mac warranty & update issues. Eventually they may well end up with a new MBP).
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)
Macbook Pro / 12" Powerbook Mac OS X (10.4.6)

Font color issue with inserted HTML content in JTextPane (HTMLEditor)

Hi everyone,
I have a very serious issue with the HTMLEditor I'm developping. This editor is a little bit special since it is intended to edit blocks of HTML content that are loaded when the editor is initialized.
You can in fact decide to keep this loaded HTML content or start a new HTML document from scratch. Alright, now my issue is the following :
When text is loaded, it's properly rendered. I have a functionality which let's you see the HTML code from the HTML document used in the editor, so I can check and see if code is correct, and yes, it's correct.
The problem is that when I try to change the color attribute of some text on my loaded content, nothing happens ! I don't know what's the matter with this bug, I only have it with the color attribute, with every other attribute everything's fine (font, size, etc.)
The funny thing is that, after I change another attribute for loaded content, like font family, then changing color attribute funcionnality starts to work again !
I've also noticed that I don't have any of these problems when I start my HTMLDocument from scratch (when I create a new HTML document and start typing text).
Another weird thing, is that I have a feed-back feature in my editor which reflects attributes for text over which the caret is positionned. For example, if you put caret over red text, the color combo box displays a red value, you know, just like in MS Word. Well, with my loaded content if I have a red text color and I decide to put it in green, the color combo box displays the green value when I click over text for which I have changed color, but in my JTextPane it's still red !! And when I try to see the HTML code generated nothing has changed, everything is still red !
There is something really strange here, this means that when I get the attributes of the loaded text from the HTMLDocument, color appears to be green, but when it gets rendered in the JTextPane it's still red and when it gets anlyzed to produce the corresponding HTML code, these changed attributes are not taken into account.
But the most weird thing above all, is that I don't have this bug everytime, sometimes I start my HTML editor applet and it works fine, and some other times this color issue is bakc there. Is this a known bug for Swing API or not ?
=============
This is more or less my technique :
//I declare a global reference to my HTMLDocument
HTMLDocument _docHTMLDoc;
//Create a JTextPane
JTextPane _tpaEditor = new JTextPane( );
//Set type content to automatically select HTMLEditorKit
_tpaEditor.setContentType("text/html");
//Get a referene to its HTMLEditorKit
HTMLEditorKit _kitHTMLEditor = (HTMLEditorKit) _tpaEditor.getEditorKit( );
//I then have a function to create new documents
void newDocument(){
_docHTMLDoc = (HTMLDocument) _kitHTMLEditor.createDefaultDocument();
_tpaEditor.setDocument(_docHTMLDoc);
   //I do other stuff wich are not important to be shown here
//I then have another function to load content
void loadContent(){
   //I get content from a HashMap I initialized when I started my applet
   String strContent = (String)_mapInitParameters.get("html_content");
   //I set content for my editor
   _tpaEditor.setText(strContent);
//Notice.. I have tried many other ways to load this text : via HTMLEditorKit and its insertHTML method, I
//have also tried to store this content in some reader and make HTMLEditorKit read it... and nothing,
// I always get the bug
//To change color it goes like this :
JComboBox _cboColor = new JComboBox();
//I correctly initialize this combo with colors
//then I do something like this
ActionListener _lst = new ActionListener(){
   public void actionPeformed(ActionEvent e){
      Color colSel = (Color) _cboColor.getSelectedItem();
      MutableAttributeSet mas = new SimpleAttributeSet();
      StyleConstants.setForeground(mas,colSel);
      setAttributeSet(mas);
_cboColor.addActionListener(_lst);
//Set Attributes goes something like this
private void setAttributeSet(javax.swing.text.AttributeSet atrAttributeSet) {
        //Get current 'End' and 'Start' positions
        int intCurrPosStart = _tpaEditor.getSelectionStart();
        int intCurrPosEnd = _tpaEditor.getSelectionEnd();
        if(intCurrPosStart != intCurrPosEnd){
            //Apply attributes to selection
            _docHTMLDoc.setCharacterAttributes(intCurrPosStart,intCurrPosEnd - intCurrPosStart,atrAttributeSet,false);
        else{
            //No selection : apply attributes to further typed text
            MutableAttributeSet atrInputAttributes = _kitHTMLEditor.getInputAttributes();
            atrInputAttributes.addAttributes(atrAttributeSet);

hi, friend!
try this:
void setAttributeToText(JTextPane pane, int start, int end, Color color) {
MutableAttributeSet new_att = new SimpleAttributeSet();
StyleConstants.setForeground(new_att,color);
HTMLDocument doc=(HTMLDocument)pane.getDocument();
doc.setCharacterAttributes(start,end,new_att,false);
It works fine in my Application, hope will work in yours, too.
good luck.

Color Issues with Mini - DVI to DVI connection

Similar Messages

Maybe you are looking for