Color Laserjet 2600n print quality is terrible! Help!

I have had my 2600n for about two years now and I've never been able to get it to print like it should, the demo page is beautiful every time, but anything from my computer looks terrible, there are certain things I can tweak and they'll print pretty well but I'm constantly running into problems. I would blame it on the toner or the printer but like I said, the demo page looks amazing every time, so it has to be a computer thing. Has anyone else had a similar problem? I'm getting so frustrated and I feel like the only fix is spending $300-400 on a new printer which I'd hate to do because this printer should be fine! I have a MacBook Pro running OSX 10.9, I used to have a Windows 7 PC and I'm pretty sure it had the same problems.
If anyone has any ideas for me I will be forever grateful!

The Colour LaserJet 2600n printer is a host-based device, which means that:
It doesn't understand any of the traditional Page Description Languages (PCL5, PCL6, PostScript).
All of the major work of rendering is done on the host workstation.
What is sent to the printer is (a series of) encapsulated, compressed, raster images; the printer just unencapsulates and uncompresses these, and prints the resultant pixels.
Perhaps what is happening is that the Mac (which, as far as I'm aware) usually natively generates PostScript jobs, and these must be converted (by whatever the Mac equivalent of a printer driver is) to the required (proprietary) host-based format - such conversions sometimes introduce unwanted issues.
Having said that, if you also experienced the same problems with a Windows 7 workstation, then something else may be responsible for the poor quality.

Similar Messages

Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

Hello,
Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network. Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
Thanks
This question was solved.
View Solution.

Have you plugged the printer into your router and does it have a proper IP address? If so:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Color LaserJet 2600n printing 2 green horizontal lines

Have a Color LaserJet 2600n printing 2 green horizontal lines on each printed copy.

Hi.
Can you measure the distance in millimeters between the two lines and post a reply back?
Kazman
I am an HP Employee
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP Color LaserJet 2600n Printer

Anybody know how to print on 18 inch card stock on HP Color LaserJet 2600n Printer?

https://discussions.apple.com/message/23706799?ac_cid=ha123456#23706799

HP color laserjet 2600n - printing problem.

When the my HP color laser jet 2600n print a page, it is no question if this is blank or colored, the paper show 2 vertical strips constiued for more parallel very thin lines.
One strip is large about 1.2 cm at 3,5 cm from the edge; the other is large about 0.5 cm at 4 cm from the opposit edges.
The color of the bands is primarily cyan - green.
The intensity of the strips is different from any print.
The problem is increased quickly.
The levels of any toners are about 45%.
The HP page print test for the toner cartige do not show any problem (however there are even the 2 verical strips).
The tranfer roller, after the printig proces, is no clean and present the sames strips above described.
I cleaned by a liquid soft cleaner the transfer roller and other part easily detachable and finding in this the presence of dirty then removed: any improvement.
I observe that the photosensitive drums of the cartrige toners (cyan e magenta) are not perfectly clean: it present traces of toner in corrispondence of the bands.
I think about a phenomenon of fat dirty that has propagated from the rollerr to the drums.
Some other user has already found my problem?
Could I look for to resolve without resort to the after-sales service?
How to can eventually clean the drums?
Sorry for my bad English.
Thank you.

1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
2. let it run to initializing.
3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
Cheers

LaserJet 2600n Print Quality problem (with a scan showing the problem)

I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits. To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas. This scan of the output shows the problem:
There are lighter areas (less covered by toner) at the bottom (page orientation wise) of solid black blocks - but only where there is a subsequent block of black below! For example, the leftmost shape's bottom edge is fine.
I'm perplexed. I'm very impressed with the configurability of the 2600n, and I get the feeling that there's probably a setting I could tweak to solve this, and I'm hoping that there's a laser printer expert reading this forum who'll have some suggestions.
Cheers,
Chris.

It looks to me as if you have your print quality setting in your printer driver set to standard or draft rather than set to best photo. This setting has to be changed in your printer driver which is accessed by the button in the lower left-hand corner of the screen when you are in the print module.

Color LaserJet 2600n printing issues

When we print color images, the magenta does not print at all. Also it will smudge the ink on both ends of the paper. I cleaned the belt and it wasnt dirty at all. Hoep you can help.

This seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
The article for the printer is:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
This may be the reason why a previous response was not provided or why it was buried..
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HP Color LaserJet 2600n and HP IP Printing

I was having trouble configuring my HP Color LaserJet 2600n for HP IP Printing. The following steps resovled the problem. Perhaps others may find this useful.
I just purchased an HP Color LaserJet 2600n printer at CompUSA. I was able to successfully connect it to my network and print using Bonjour Printing (from all of my various iMac, iBook, PowerBook and MacBook computers), but was not able to configure it for TCP/IP printing. To solve the problem,
1. I visited the HP website and downloaded new firmware for the printer:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=446154&prodTypeId=18972&prodSeriesId=446153&swLang=8&taskId=135&swEn vOID=219
There are 3 files there, I downloaded and installed all of them in the following order:
2. HP Color LaserJet 2600n Printer Firmware Update Utility - for some reason, the firmware on my new printer was from 2005 even though HP had posted new firmware as late as Dec 2006.
3. HP color LaserJet 2600n DC controller firmware update utility - a firmware update that addresses a ghost-image issue.
4. HP Color LaserJet 2600n OS X Universal Binary Full Software Solution - an updated set of drivers.
After all firmware and software was successfully updated....
5. I opened /Applications/Utilities/Printer Setup Utility.app and click the "Default Browser" button at the top of the page.
6. Clicked the "More Printers..." button at the bottom of the page.
7. Set the popup at the top of the configuation pane to "HP IP Printing" and clicked the "Manual" button immediately below it.
8. Entered the local network address for my printer (xxx.xxx.xxx.xxx) and clicked the "Connect" button. The rest of the information in the panel was automatically filled in for me.
9. Clicked the "Add" button. The printer was added to the list of available printers in the Printer List, although the name of the printer is set to the ID that is configured in the printer firmware.
10. Select the new printer (NPIA0853X in my case) and click the "Show Info" button in the Printer List toolbar. Move the popup on the dialog to "Name and Location" and enter an new name (e.g., "HP Color LaserJet 2600n").

Download and run this on the XP machine. I suspect a security system update or change, but let's let the utility tell us.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Print quality color laserjet 2600n

The company I work for has a Color LaserJet 2600n. We continually run into a problem with the print quality. When we print a demo page, the colors seem fine. Then we try to print a document or handout that has color in it, and the edges along the sides of the paper fade and the colors seem spotty, at best, and usually the colors are faded. I have even tried changing the printer properties to lighter, heavier and even glossy paper, and ther is just no discernable difference in quality. I have also cleaned the printer and changed the ink cartridges and, again, there are no differences. The colors simply seem to fade near the edges of the paper. Is there anything that can be done?

Hi balaspa; Hope you are doing well;
Your HP laserjet 2600n is a commercial product. I will suggest posting in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of luck;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

HP Color LaserJet 2600n quit printing on an XP machine

Even though my HP Color LaserJet 2600n shows "ready" on my XP control panel screen for printers, it just quit communicating with my XP system. I have it connected via an Apple Time Machine and found it easy to connect to the printer from any computer in the house (desktops, laptop, netbook, Apple). It worked fine for a long time but now I can't get my XP system to connect to the 2600n. Anyone have a suggestion on what I should do to regain the ability to print to this printer from my XP desktop? Thanks in advance.
PS - Although I know this sounds wrong, I didn't install any new software or make any other changes to my system. It was printing fine yesterday and today - nothing! I've rebooted the PC and the printer. There are no error messages on the printer - it simply says "Ready". What am I missing?

Download and run this on the XP machine. I suspect a security system update or change, but let's let the utility tell us.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Unable to print to an HP Color LaserJet 2600n in 10.4.11

Hi (I really, truly have gone through the other topics and can't find a solution).
I'm trying to print on a G3 iMac via USB to an HP Color Laserjet 2600n. The printer driver is not included with Apple, and when I went to download it from the HP site (complete package for G3 computers running OS 10.3 or 10.4) it says there are no files to mount. I downloaded the same thing for a G3 running Panther and it installed perfectly and that iMac prints to the 2600n without a problem. I then downloaded the driver for G4s using the 2600n onto the G3 running 10.4.11 and while it installed fine and the print setup recognizes the printer, the printer will not print. It goes through "starting job" gets to "processing job" and stays there forever. I was on Customer Support with HP, and as a result of installing the printer on my older iMac, we've deduced the problem must be with the software on the G3 that won't print (the one running 10.4.11)
I read somewhere that with this HP printer and some others the job gets processed on the computer itself and then is sent to the printer. Clearly, the iMac is not processing the job.
I've installed, uninstalled, reinstalled, redownloaded, etc. etc. I don't know what to do. I installed Ghostscript et al, but there is no driver there for the 2600n. I've tried generic postcript and it doesn't work- in that case the print box goes for a few seconds and then says "printing stopped."
It's only this printer- this iMac with 10.4.11 prints to two other printers via a Bonjour network (an HP 2015 and an HP 2300n). But I'd like access to a color printer. Any thoughts? Any ideas? Why won't the complete G3 package install on this iMac when it will on the one running Panther? And why won't it process the print job?

I'm trying to print on a G3 iMac via USB to an HP Color Laserjet 2600n. The printer driver is not included with Apple, and when I went to download it from the HP site (complete package for G3 computers running OS 10.3 or 10.4) it says there are no files to mount. I downloaded the same thing for a G3 running Panther and it installed perfectly and that iMac prints to the 2600n without a problem. I then downloaded the driver for G4s using the 2600n onto the G3 running 10.4.11 and while it installed fine and the print setup recognizes the printer, the printer will not print.
OK. So you began by trying to install the same package you installed on the Panther machine? It sounds as though the file got corrupted during the download if the system couldn't mount the disk image. Anyway, you then downloaded a different package for G4 machines and installed that on your G3 machine but this didn't work.
Are you sure about this? Do HP really have different packages for G4 and G3 Macs? If so, you will need the G3 package for a G3 Mac. Can you point me to the HP download page listing the drivers so I can take a look? That way I should be able to see exactly what you've tried so far.
OK, I found the page. There isn't a G4 package as such but the G3 one is supposed to run on Tiger so that is likely the one you need.
Is the printer's firmware up to date? I notice there's an update utility for it, too.
It goes through "starting job" gets to "processing job" and stays there forever. I was on Customer Support with HP, and as a result of installing the printer on my older iMac, we've deduced the problem must be with the software on the G3 that won't print (the one running 10.4.11)
This doesn't follow. It could be that HP's drivers don't work properly on Tiger but do on Panther. That could as easily be HP's fault as anybody else's. (It might not be their fault, but the fact that their driver works on Panther doesn't necessarily mean that driver - or another driver - will work on Tiger.)
I've installed, uninstalled, reinstalled, redownloaded, etc. etc. I don't know what to do.
When you uninstalled, how exactly did you remove the installation? Please give me as many details as you can.
I installed Ghostscript et al, but there is no driver there for the 2600n.
Why did you think installing GS might help? Ghostscript doesn't provide print drivers as far as I know (though it is involved - or can be involved - in printing processes).
- cfr

Unable to network print to HP Color LaserJet 2600n connected to Windows PC

I just got a new MacBook Pro and I am trying to print on my network to a HP Color LaserJet 2600n that is connected and shared on a Windows PC. I have carefully followed the instruction posted on http://www.ifelix.co.uk/tech/3015.html and I am still unable to print. I made sure the printer name on the remote PC has no spaces. After I enter (on my Mac) my user name and password to access the user account on the remote Windows PC, I get the following error message:
Unable to connect to server with the provided password and user name. Error: 256
Please help! Thank you!
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

The Windows PC is running the Windows XP Firewall, the Avast Antivirus, and Windows Defender. I have deactivated all these applications and the issue persists.
I called Apple today (I am still in my 90-day free support since this is a new MacBook Pro). After some basic troubleshooting with a tier one rep, I was transfered to a tier 2 rep who told me after making sure that I was following the right steps to try to add the printer, that since the HP LaserJet 2600n printer is connected to a Windows XP computer, my set-up is not supported by Apple and declined continuing troubleshooting the issue. According to this person Apple will only support network printing when the printer is directly attached to a hub/router.

Hp color laserjet 2600n, very dim grayish film when printing black only

For some reason, my hp color laserjet 2600n has started printing with a very dim grayish film over each page. I've had this printer for about a year, and it didn't do this at first. Does it no matter what program I print from. I'm sure it's a setting issue, but haven't been able to figure it out. Any ideas?
And, when I select to print in black only, it still prints the color on web pages. Is there a way to print from only the black cartridge? These are the options in the printer dialogue box under color: print in grayscale, black only, 4-color. Under these settings are other options, edge control, half-tone and RGB color. I've tried each setting individually and still the gray film. The only other possibility I can see is under Print Options, it has draft quality or image quality. I've tried both and still the film.
Have any ideas.

1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
2. let it run to initializing.
3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
Cheers

HP Color Laserjet 2600n cant print on Win8 even with the right driver installed!

I configured the HP Color Laserjet 2600n from TCP/IP port and dit the windows update on drives, installed my printer but it won't even print the test page. it says error printing on the print queue. I cheked the network and sharing. I checked the printer works perfectly on Win 7 but not on my hp Win8.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

E51 print with an hp color laserjet 2600n

Hi
I have a nokia e51, it can connect to my wi-fi but I have a problem with my Hp color laserjet 2600n. I try to create a unix print server on my pc that running windows xp, but it doesn't work. In particular the print receive the document in its queue bun doesn't start. I try a direct connection using the socket bearing but this attempt fail too.
Thank You for help.

Hi
I have a nokia e51, it can connect to my wi-fi but I have a problem with my Hp color laserjet 2600n. I try to create a unix print server on my pc that running windows xp, but it doesn't work. In particular the print receive the document in its queue bun doesn't start. I try a direct connection using the socket bearing but this attempt fail too.
Thank You for help.

Color Laserjet 2600n print quality is terrible! Help!

Similar Messages

Maybe you are looking for