Color Laserjet 4700n Firmware Update

The site keeps telling me the update will be available april 2011, does anybody know where I could grab the firmware?

you can check whether the Firmware was updated by checking the configure report:
1. Open the printer driver, and then click the Properties or Preferences button.
2. Click the Services tab, and then, in the Print Information Pages drop-down list, click the Config
Page list item.
3. Click the Print button.

Similar Messages

  • HP LaserJet 1518ni - Firmware update doesn't do anything

    Hello folks
    I am trying to update my HP LaserJet 1518ni to the latest Firmware (2013-11-08 , Version20130923, 4.22M).
    My current firmware datecode is: 20120110
    I went here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3422472
    Downloaded the file CP1510_Series_FW_Update-20130923.exe
    Turned Firewall and AntVirus OFF, ran the Executable with administrative priviliges - it says it found the printer and I see a progress bar and also the smiley at the end. But the printer is unimpressed and shows just "Ready" in the LCD, nothing changed: The files does simply nothing.
    Tried it via IP Port and also USB on another PC, same effect.
    What is going wrong?
    Where are the good old .RFU Files I just can TFTP to the printer...?
    Thanks,
    Thomas
    This question was solved.
    View Solution.

    Hello @TomPe , and welcome to the HP Forums!
    I see you're experiencing firmware issues. I'd like to help!
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then suggest downloading and running the HP Print and Scan Doctor.
    Once you have run the doctor, try installing the firmware via this tool:
    HP Color LaserJet Printer Firmware Update Utility
    Also, can you print standalone?  I would recommend pressing the right arrow until you see reports, press OK, select diagnostics page, and press OK.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Color Laserjet 4700n series

    Hi, I am trying to install wireless printing on my HP Color Laserjet 4700n printer in my office with three different computers. However, I am having trouble finding out how to do this on each computer in the office. I would appreciate if someone could help me with this or even tell me if wireless printing is possible with this series. Thank you.
    This question was solved.
    View Solution.

    According to the spec sheet for the Laserjet 4700n printer, this printer only has these methods of connectivity. Unfortunately, wireless printing is not mentioned.
    Laserjet 4700n connection methods:
    Enhanced input/output (EIO) card slots for optional connectivity. (Network connection using an HP Jetdirect embedded print server is standard on HP Color LaserJet 4700n, HP Color LaserJet 4700dn, HP Color LaserJet 4700dtn, and HP Color LaserJet 4700ph+ printers.)
    USB 2.0 connection.
    HP Jetdirect embedded print server to enable network connectivity without requiring use of an EIO slot.
    Standard bidirectional parallel cable interface (IEEE 1284-C compliant).
    Auxiliary connector.
    Both USB and parallel connections are supported, but cannot be used at the same time.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Hp Laserjet CP3525 Firmware update failure

    I was trying to update the firmware on an HP color Laserjet CP3525 using a USB  connection using the instructions that were posted on the HP website for the Firmware upgrade.  It looked like everything was going well, but when the printer rebooted it never gets past the 6/6 screen on the LED screen.  I have left the printer in this condtion for several hours and it never gets past this area. I'm assuming that the Firmware upgrade caused the printer to do a hard crash and is not recoverable, but I'm hoping that someone might be able to help get this back up and working.  Any assistance would be greatly appreciated.
    This question was solved.
    View Solution.

    Well, in general if the firmware update was interrupted for any reason it would lead to this. This could be caused on the computer side (restarting/logging out/ending the process before it is complete) or in the cord that you are connected with if it is damaged in any way or not properly secured in the USB ports.  I am sorry that you are in this situation, I understand that in a situation with limited spending caps you would have legitimate concerns about updating your other machines. 
    If you have any further questions or issues myself or one of my colleagues are on this forum almost 24/7. 
    I hope you have a wonderful rest of the week, Bob! 
    -Spencer 

  • Laserjet 1525nw firmware update for macintosh

    Printer HP LaserJet 1525 NW
    OS Mac OSX Lion 10.7.2
    I received an email from HP saying I needed to upgrade the firmware. I downloaded and ran the Mac installer. It crashes when it tries to download the firmware update from the internet. There is no explicit description of the error - the installer simply crashes. What am I supposed to do? I have tried repeatedly downloading the intaller in case the first copy was corrupt. The crash takes place consistently at the same point in the firmware installation process.
    This question was solved.
    View Solution.

    You could try download directly from here to some removable media on another machine (in case your mac is acting up)? http://ftp.hp.com/pub/softlib/software12/COL34888/lj-86474-6/CP1520_Series_FW_Update-20111215.dmg
    The above firmware update utility is for the HP Color LaserJet Pro CP1520 series.
    This utility is for use on Mac OS X 10.5, Mac OS X 10.6, Mac OS X.
    The utility can be used with a USB connection or network connection. Be sure to use the firmware update utility that is specific to you printer model.
    This update is recommended for HP Color LaserJet Pro CP1520 series that has a firmware version prior to 20110329.
    This utility updates the printer firmware version to 20110329 (March 29, 2011).
    The firmware version can be found from "Setup Menu" -> "Service" -> "Firmware Datecode".
    I am an HP employee.
    Feel free to provide Kudos if I have helped you!

  • Laserjet 200 firmware update - "Something is bad with your device"

    When trying to update the firmware on my HP LaserJet 200 color M251nw I get:
    "Something is bad with your device. Device is in error state and cannot be reflashed because of this. Resolve the problem and try again.".
    However the device looks ok, no errors on screen, logs, checked Web UI for hints, reboothing doesn't change the issue....
    Current firmware is 20121026.
    Thanks for your help!

    Hi,
    I just check the system requirement on the firmware update page, it doesnt mention MAC.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-7&cc=us&dlc=en&lc=en...
    Can you try updating it by conecting it to a windows PC if you have any?
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP LaserJet P1102 firmware update freezes

    HP LaserJet P1102w setup will not allow me to get the firmware update because it says I must complete all print jobs first. Only print job is the Test Page, which never printed at the end of the registration/install process.

    Hey @jmg616,
    Welcome to the HP Support Forums!
    I understand that you're having an issue running a firmware update to your HP Laserjet Pro P1102w. I would like to assist you with resolving this issue. However, I do have a few questions for your first before I can offer accurate support.
    What Operating System are you using with your printer?
    What's my OS?
    Is you printer connected through USB cable or Networked?
    If you have a print job in your print queue, like your test page that failed to print after you ran the installation of your printer, than a firmware update won't go through. A firmware update is sent to the printer like a print job so you need to make sure that the queue is empty.
    If you're using a Windows Operating System can I have you run the HP Print and Scan Doctor tool? This tool will 'fix printing' issues for you and should it detect any driver or software conflicts it will identify and let you know what the issue is. The tool will also attempt to fix the issue for you.
    HP Print and Scan Doctor
    Please let me know if the Print and Scan Doctor resolved your issue. Should you still be having problems than please respond with your Operating System and how your product is connected. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP Laserjet 4 Firmware Update

    I have a HP Laserjet 4 printer and I installed a JetDirect card on it but I don't have the MIO menu on it to setup TCPIP, so I figured I needed a firmware update.  But there is no firmware update listed on the hp website.  Does anyone have a firmware update for a HP Laserjet 4 printer that is later than 12/14/1992.  (Firmware Datecode:19921214)  Thanks!

    Hi.  I too am looking for firmware for this printer "Laserjet 4" .  I have a much older firmware installed on mine.  You mentioned in your posting that you have one from 1992.  Do you mind sending me a copy?

  • No network connection after hp laserjet m602 firmware update

    After updating firmware on our hp laserjet M602 printers, the printers are no longer communicating with our print server. I can't even print configuration pages, if the Network cable is connected.  The update completed successfully and I can print using a USB connection.  The Event Log displays the following:
    EVENT:           42.B0.01            Firmware:     23000331_377983                    
    Description: Missing String ID: en-US: Please refer to the Jetdirect Admin Guide_Text
    Additional Notes:
    Before firmware update:                                            After firmware update:
    Firmware Datecode: 20111217                                   Firmwar​e Datecode:  20130722        
    Firmware Revision: 2131305_192069                     Firmware Revision:    2300331_377983
    All Help will be greatly appreciated.... JP

    Try to turn on device while network cable is disconnected (standalone) and let it completely boot till READY status.
    Connect the network cable & note the front panel status (display & LED's both).  Also note if the LAN port LED's are ON.
    Hope that there is no data being processed by printer (data LED on control panel).  If yes, then you might need to delete any pending jobs (including firmware download initiated from computer - if pending in que as a job)
    If printer shows READY status without any data, then you may try printing printer internal documents using control panel menus.  Next step will be to access printer through web brower (EWS page) and confirm if the device is available for use in network.
    Please mark the post that solves your problem as Accepted Solution
    Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
    (Although I am an HP employee, I am speaking for myself and not for HP)

  • Laserjet cp2025 firmware update failure

    My lasejet is USB connected and I've been trying to update the firmware to the latest version. I've done everything in the support area to get it to update but still no joy. The update runs and says it succesfully updated buy the smily face when it is done but the printer didn't do what HP says it was suppose to and verified by printing a config page. I've tried networking and still get the same results.
    Anyone have any idaes as to what might the problem , Me or the firmware update?

    Well, in general if the firmware update was interrupted for any reason it would lead to this. This could be caused on the computer side (restarting/logging out/ending the process before it is complete) or in the cord that you are connected with if it is damaged in any way or not properly secured in the USB ports.  I am sorry that you are in this situation, I understand that in a situation with limited spending caps you would have legitimate concerns about updating your other machines. 
    If you have any further questions or issues myself or one of my colleagues are on this forum almost 24/7. 
    I hope you have a wonderful rest of the week, Bob! 
    -Spencer 

  • Laserjet p1102w firmware update failed?

    Hello,
     when updating my printer yesterday the update application finished with a message claiming that the firmware update was succesfull. But the yellow printer light kept blinking.
    I waited a full hour but nothing changed. 
    After trying to update the firmware again I got a message that the update is not possible and that I should powercycle the printer. 
    After unplugging the printer and restarting it the yellow light kept blinking.
    Trying to update the firmware for a third time finally resulted in a message that the "firmware is already" up to date.
    What now?

    you can check whether the Firmware was updated by checking the configure report:
    1. Open the printer driver, and then click the Properties or Preferences button.
    2. Click the Services tab, and then, in the Print Information Pages drop-down list, click the Config
    Page list item.
    3. Click the Print button.

  • HP Color LaserJet M750 Firmware download site down?

    Hi,
      Trying to download a firmware update for a Lasjet M750, but the site says:
    "Could not open page
    The service or information you requested is not available at this time.
    Please try again later.
    (Error: system-applsrv_unavail) "
    Is the site down?  I was trying yesterday too and it wouldnt even load.  Whats going on??
    This question was solved.
    View Solution.

    Nevermind, site is back up finally!

  • HP laserjet p1102w firmware update problem

    HP offers an update of firmware for Eprint, nevertheless this update has a mistake since when it establishes himself and got the power off the printer, the IP gets lost in the memory of the printer and changes for 0.0.0.0. It is a mistake for HP in this offer that already I have seen in several forums for many people looking for the solution but nothing yet. Is there a way to re back to the older firmware to the printer? This is a big mistake of HP not resolved?

    Hi  I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details. 
    If you are unfamiliar with how the Forum's private message capability works, this post has instructions.

  • HP LaserJet 3800 Firmware update

    I am trying to update firmware on a USB attached 3800.  I cannot find a update utility that will allow me to select the .40 firmware to upload to it. 

    There are a couple of ways that this can be accomplished.
    1) Printer Sharing - Assumes that your PC is network connected.
    NOTE: My example utilizes Win7.  XP, Vista are similar but may have a couple different steps.
    a. Open Devices and Printers
    b. Right Click on the printer and select Printer Properties
    c. Click the Sharing Tab
    d. Click Share this Printer and Give it a Share Name for example: MyPrinter
    e. Click Apply and/or OK
    f.  Then go to the windows Start Button and  in "search files and folders" type cmd and hit enter.  This will open a DOS prompt.
    g. In the DOS Prompt Type:   copy /b <TheFileName>  \\<HostName>\<ShareName> 
    Example:
    <TheFileName> = FWREV_40.rfu
    <HostName> = KazsLaptop
    <ShareName> = MyPrinter
    copy /b FWREV_40.rfu  \\KazsLaptop\MyPrinter
    This command will do a binary transfer of the FW Upgrade File to the printer via the network share.
    2) User a PRN printing utility.
    One example tool that I am familiar with is available at the following Link:
    http://www.lerup.com/printfile/descr.html
    To use this tool you do the following.
    a. Start the tool
    b. Click "Print File"
    c. Locate and select the RFU file.
    d. Click Open
    e. Select your printer.
    f. Click OK
    Both have worked equally well for me in the past. 
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Laserjet 2430dtn Firmware Update

    Having recently aquired this printer from Work.  I noticed the firmware was old and proceded to do the upgrade to version 8.120.4 with the files found on the HP web site.  The upgrade file is "lj2420fw_08_120_4.rtf"  The printer happily received the upgrade and then displayed a message "cycling power".  This message remained for over an hour at which time I manually ccled the power.  Once doing this the printer comes on but the display remains blank (the display back light is off as well) and the ready, data and attention LEDs are off.  How can I recover from this state.Model number : Q5962A

    You may not be able to since the firmware is now fried.  Only way which may work, would be to connect to a computer with a parallel cable and to load the driver on that computer using port lpt1 as the port.  You can then use the easy firmware download and in the box that comes up choose the printer you just added to that computer and see if the firmware tries to load.  If that does not work, then download the firmware for all operating systems, download and a zip folder will open with 2 files.  Copy the first file to a new folder you make in the c drive main directory called 2430.  After copying the file, rename it to 2430.rfu.  Now on that computer go to a dos window (start, run, command and enter) and at the prompt type cd\2430 and hit enter.  Now at the prompt type copy /b 2430.rfu lpt1 and hit the enter key.  If it is working, something will appear on the screen.  If it does not work, then the formatter will need to be replaced.  Good Luck.

Maybe you are looking for

  • Display Purchase Order in SRM 7.0 -workflow error

    Hi SRM Gurus, Hi  Masa , Please check this thread, I am having the same error We are upgrading from SRM 3.0 to SRM 7.0. while displaying purchase order Cannot get process info; function BBP_PDH_WFL_APPROVAL_SIMULATE throws exception Workflow Not Foun

  • How to send a file as an attachment using mailx

    Hi Can any one tel me how to send a file as an attachment using mailx command in shell script. Thanks, Suman.

  • How to consume data model adf library in view project?

    Hello, I am using Jdev 11.1.1.6. I have a Jdev workspace containing business component (entity objects, view objects and application module exposing the VOs). This workspace is deployed to an ADF Library. This library is packaged with DB connection d

  • How to use Logger !!!!

    Hi guys I am trying to view my console output I so new to EP I am having a lot issues poping up everywhere, can some on tell me how I can use the Console output like how view the output on Tomcat or on webshpere is there a way by which we can do it i

  • Imovie is damaged or incomplete

    When I try to open Imovie, it says the program is damaged or incomplete.