Color LaserJet 4730 customizing print trays

I have an HP Color LaserJet 4730mfp. I have everything, including faxes (they print automatically), being printed at that printer. I would like to ensure that the priority for normal print jobs is Tray 2, 3, then 4. I would like to use Tray 1 (on the side) as the manual feed to envelopes and other special print jobs. Is there a way to do this without making users have to figure out which tray to use?
I have run into the problem where a user who is printing envelopes gets their print interrupted by a fax. It unnecessarily uses an envelope and loses most of the information on the fax.

This is a known problem and will most likely have to wait for an update from Apple.
http://discussions.apple.com/message.jspa?messageID=5685294#5685294
http://discussions.apple.com/message.jspa?messageID=5684428#5684428

Similar Messages

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC.

Unable to install hp Color LaserJet 3600n network printer on new Windows 7 (64bit) PC. According to Microsoft Windows Compatibility Center website (http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...) this printer is compatible.
I have tried everythingto no avail. HP will not support and have, very little online resources addressing this particular issue. What should I do?

This may help: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02538616&lang=en&cc=us
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color Laserjet 1600 cannot print in color with Pages 09

Hi, everybody!
I got a huge problem for me that the HP Color Laserjet 1600 cannot print in color with Pages 09 after I upgrade to 10.6.1. It worked very well in 10.5.8. Since there is no official driver from HP website for 1600, so I used foomatic/foo2hp as the driver.
It is very strange that I can print in color with Safari and Preview in 10.6.1, but cannot with Pages 09. When I print with Pages 09, it always shows that the print job was completed but my printer was nothing happened.
I just re-install the 10.6 OS "complete new", install the printer driver with the instructions on this forum.
It would be high appreciated if somebody can help me on it!

Why doesn't MAC just give us the driver for the HP Color Laserjet 1600? It's one of the most popular home based business laserjets. It's the one I use and a lot of other people in business use it so I'm at a loss as to why they don't.
I bought my MAC Pro tower for video editing and I can't print from it and have had to reinstall the OS on it once already because Safari wouldn't open a window. So much for the MAc advertising statement of "We're so much easier to use."
After spending close to $10,000 on MAC equipment, Tower, Laptop, Monitor, etc. if they think I'm going to spend more for a new printer just because I can't get a driver to print they're thinking wrong. I going to re-think my new cell phone purchase too. Has anyone had software issuses with their phones before I go out and buy one?

My HP Color Laserjet CP1215 only prints when sending a command from a distant computer (shared pr.)

My HP Color Laserjet CP1215 won't print when I send a print command from the computer to which the printer is connected to. The printer is shared. When my colleague sends a print command from another computer, the printer does his job.

I am currently in the same boat. I love how you posted this legitimate issue 3 years ago and there is still no resolution. It really reflects on the company's character and attitude toward their customers.
Hopefully this will get a response.

HP Color LaserJet 2600n quit printing on an XP machine

Even though my HP Color LaserJet 2600n shows "ready" on my XP control panel screen for printers, it just quit communicating with my XP system. I have it connected via an Apple Time Machine and found it easy to connect to the printer from any computer in the house (desktops, laptop, netbook, Apple). It worked fine for a long time but now I can't get my XP system to connect to the 2600n. Anyone have a suggestion on what I should do to regain the ability to print to this printer from my XP desktop? Thanks in advance.
PS - Although I know this sounds wrong, I didn't install any new software or make any other changes to my system. It was printing fine yesterday and today - nothing! I've rebooted the PC and the printer. There are no error messages on the printer - it simply says "Ready". What am I missing?

Download and run this on the XP machine. I suspect a security system update or change, but let's let the utility tell us.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Color LaserJet 3500n - Slow Printing in Snow Leopard

I've installed all of the HP Printer Updates for Snow Leopard (even manually downloaded the latest entire HP Printer Update), Reset the Printing System and reinstalled all of my printers, but I still continue to have an issues where it takes over 4 minutes for the first page of a print job to print... This is a network printer with an external HP JetDirect (Model #J7942A) box and the slow printing occurs with all Snow Leopard machines. Firmware for both the Printer and the JetDirect box are at the latest versions...
I did notice that Apple's kb article indicates that the latest print driver for this printer is 1.0.2, but my driver indicates 1.0.1... Is the kb article incorrect? Any ideas why I'm not getting the 1.0.2 driver? Suggestions?

I've got the same problem with a Color Laserjet 3550 + JetDirect en3700.
For security reasons, I disabled SNMP v1/v2 on JetDirect. Everythings works fine on Leopard.
I got this problem after upgrading to Snow Leopard (ver. 10.6.2 with HP printer driver 1.0.1).
Looking at network traffic with Wireshark, I've noticed some timeout on SNMP v2 packet directed to the printer.
I've enabled SNMP v1+v2 on JetDirect and now everithings works fine, but security problems related to unsecure SNMP version are now open.
I've upgraded HP printer driver, but I can't find driver version 1.0.2, as mentioned in http://support.apple.com/kb/HT3669#HP.
Any suggestion?

HP Color Laserjet 2600n cant print on Win8 even with the right driver installed!

I configured the HP Color Laserjet 2600n from TCP/IP port and dit the windows update on drives, installed my printer but it won't even print the test page. it says error printing on the print queue. I cheked the network and sharing. I checked the printer works perfectly on Win 7 but not on my hp Win8.

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Printers - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

[HP Color LaserJet CP1518ni] Stopped printing black ink documents when Magenta toner finished

Hi there,
I have a HP Color LaserJet CP1518ni.
I just printed about 200 pages of black ink documentation. The black ink cartridge is still about 38% full.
Although none of these printouts involved colour, the printer started flashing the message: "Replace magenta cartridge".
Since then, it would no longer print. Again, I am only attempting to print black ink docs, and I even tried turning off the colour print option to no avail.
The printer queue on my macbook shows the doc as 'printing' and 'sending', and then it disappears, with nothing happening on the printer itself.
If I push the 'X' button on the printer, it says 'cancelling print' or something like that.
Is there any way around the problem of the printer not printing anything once one of its cartridges runs to empty, even though the printjob does not need that colour cartridge?
Thank you!
Steve

How can I find the Toolbox FX on Windows 7 Professional? I can only find information about Windows XP and Windows Vista. When I go to my Start button, and go to All Programs , there is no HP option or folder;therefore,I can't find the Toolbox FX.
My printer ran out of magenta toner, but all I want to do is print in black ink (which I have plenty of).
Can anyone please help me?

My Color LaserJet will not print in color

Hi, I have a HP Color LaserJet CP1518ni
It has been working perfectly fine with my computer until now.
I am using a Windows Vista 32-bit
I just tried to print something on here, but it automatically prints in black and white.
I tried looking in the preferences, but I can't find any options to switch it back to color.
I tried it with another computer in the house, and it worked fine there, so it just seems to be this computer.
Please let me know, thanks.

Hi there gracekpm,
Try downloading and running the print and scan doctor located here to identify any software problems:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on. Lets us know the results.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Fuser error for HP Color LaserJet 3600 Series Printer

My HP Color LaserJet 3600dn Printer have Fuser error message. What is the problem ?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also view the article related to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

How to print from iphone to hp color laserjet CM1017 MFP printer

How to print from iphone to hp color laserjet CM1017 MFP printer

In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
If you have any issues with printing, below are some steps that should help you out!
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Color LaserJet CP1515n colour print misalignment between CMYK

The registration of the 4 colors has significantly gone out of alignment by up to 2 mm both horizontally and vertically. I have tried all the HP documentation through to section 11, but no amount of calibration or changing supplies will put the colors back in alignment. I had hoped that there would be a registration tool for the laser printer but I cannot find one despite extensive searching of both HP and rest of web. I recon HP actually register the cartridges by physical alignment, but it is not obvious to me in what way the drive chain may have altered to cause this effect. Clearly a small insert can move the cartridge side to side, but for vertical adjustment there seems to be little or no play in how the toner cartridge fits into the machine. Clearly the printer was ok recently and nobody had complained, and as it has not been moved or supplies replaced (other than paper), it is probably a physical problem, but what? I don't think it is a software issue, unless there has been an upgrade to the printer driver. I can't think that the firmware would have changed either. The printer is a current model (June 2012), just out of guarantee!. Does anybody know how to fix this (real solutions only please), or maybe a HP employee will actually know a proper way to do this?

OMG I think I have cracked it.So I bought a CP1515n for £10 sold as spares or repair. Worth a punt. No toners though but for less than £7 each on ebay I was ready to go. the cyan is misaligned, the yellow ‘ain’t printing. Perhaps the crack at the of the printer indicating it was dropped was the reason.So I searched the web and came across this useful site. Did all the tricks but was curious about the dust one. Mmmmm.True, fine dust on the thingy may mean a slight lag for the first colour but picking up for the rest.So I stripped of the sides, top, front and back - basically anything that had an easy access screw and was clipped on. Gave every nook and cranny a good vacuum with the crevice extension. Also gave the wide rubber belt a really good clean with micro fibre cloth. There was plenty of fine dust and toner in really thin layers. Easy to roll it around with your hand.Put it back together and printed a test page.:/ The yellow has suddenly started working but the cyan was still out of alignment. And now for the solution. On a whim, I scrolled through the paper Def. paper type list. It was set to plain. Urrmmm, see what happens if I set it to rough. I DID IT, I AM A GENIUS. IT WORKED Try setting the paper to rough and see if that fixes it. So I have a colour laser printer for 10 quid and three new colour tonners for less than 20 quid. RESULT. I thank you.....(bows, bows again, and again to applause ringing in his ears). If you are careful you can just remove the tonner tray to get access to the rubber band that drags the paper through for a clean. There is a plastic widget on the left hand side to watch out for, it clips in horizontally. I found it because it dropped out, luckily I found where it came from.

Color LaserJet 4730 customizing print trays

Similar Messages

Maybe you are looking for