Color laserjet 5m windows 7 x64 driver

It appears that despite the compatibility list for "older" printers and Windows 7 seems to be restricted to 32 bit machines. Is there a workaround for the HP Color Laserjet 5M and Windows 7 X64? With the demise of XP I may have to retire a perfectly good printer for which I have at least a years supplies of toner, collection kits, transfer kit and drum...
Anyone out there had any joy with finding an x64 driver?

Don't know about Windows 7, but my Windows 8.1 Pro 64-bit system has a built-in driver (PostScript) for this printer series/model:
I don't know whether the driver is present on a fresh Windows install; it may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.

Similar Messages

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

HP Color LaserJet CP2025 / Windows 7(64bit)-Why the printer does not print color letters??

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

Driver for hp color laserjet cp2025 windows 7 32 bit

I just bought a refurbished Dell Optiplex 755 32 bit with Windows 7. I have a hp color laserjet CP2025. The icon appears in devices & printers window as unspecified, category unknown yet the model no. appears correctly as CP2025. It has a USB connection that loads a driver automatically. I can't print a test page etc. After I powered the system up initally I was able to print a test page but after 200 or so updates I can't do anything with the printer.
This question was solved.
View Solution.

Hi, FYI I don't think my USB printer is supported in the latest version of Windows 7. Tnx., Ray

Driver for HP Color Laserjet 1600 Windows 10 Pro 64 Bit

When will a driver be made available for the HP Color Laserjet 1600 for Windows 10 64 bit? It printed fine with Windows 8.1, but since the updgrade to Windows 10 it will not print at all. Thanks, JN

I have answered my own question or found a temporary fix until an official driver is released. After a few hits and misses with different HP Color Laserjet Drivers, I downloaded the HP LaserJet USB (DOT4) communication driver for Windows 8 and Higher (64-bit) located at the below link. It is listed for the HP Color LaserJet 3700 Printer but it worked for the HP Color Laserjet 1600 as well. Hope this will help someone. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=315850&swLangOid=8&swEnvOid=4192 Thanks, JN

Color Laserjet 2600n Windows 7 -64 Bit Looking for HP Toolbox

‎01-09-2014 08:30 AM
I'm having trouble finding the HP Toolbox. I have a Color Laserjet 2600n. OS is Windows 7 - 64 Bit. When I print checks, I notice a slight shadowing of the numbers. Thinking it may need cleaned, but I cant find my toolbox anymore and have to tried to look online. I saw something regarding there was no toolbox for Windows 7. Is this still the case? When I print on paper everything looks fine. Also, anything I print that has red in it doesnt not print very well. This has been a problem for several years. I had XP until March 2013 and then got a new computer. Before the computer switch I cleaned and aligned the printer several times, but still no red print.
Thanks,
pdl2

You should try the HP Universal Print Driver (UPD), which does list your device model as supported by the driver. Go to www.hp.com/go/upd, hit the DOWNLOAD SOFTWARE. Select a Windows 7 x64 OS, then I recommend trying the PostScript (PS) driver. The installer will prompt a few questions-- select "Traditional Mode", provide your port information, etc, proceed.
Though I am an HP Employee, my posts express my opinion, and not of HP

HP Laserjet 276n Windows 98 driver

I am searching for a generic windows 98 driver for the laserjet 200!
We need it for printing from a car diagnostic station.
Which driver coul I use to solve my problem?
thanks in advance

Hi @epertino ,
I see by your post that you need a driver for Windows 98. I will try and help you.
I checked the printer's specifications and Windows 98 isn't a support operating system for this model.
Supported Windows operating systems: Windows XP Service Pack 2, Windows Vista, Windows 7, Windows 8.
Printer Specifications for HP LaserJet Pro 200 Color MFP M276n and M276nw.
I also checked for a Universal Print Driver and unfortunately there isn't one listed for Windows 98 either.
Sorry I couldn't be of more help.
HP Universal Print Driver for Windows.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet 3600 -Windows 8.1

Is HP Color LaserJet 3600 supported by windows 8.1, 64-Bit???

Yes - and you can download the driver HERE.
Cheers!
I work on behalf of HP.

HP Color LaserJet CP1518ni & Windows 7 via network

I have a HP Color LaserJet CP1518ni connected to the network, not via a USB cable. How to I setup this printer so I can print to it from my WIndows 7 machine? Will HP be coming out with anything other than the Universal Print Drivers for this printer? If so, when?

The full feature download for your printer supporting windows 7 will be available for your product in late January 2010.
While I am an HP employee, I am not a expert on all our products. When I offer advice, I'm not speaking for HP.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

HP LaserJet p1005 windows 8 driver ?

Hello,
I've been waiting for a while to come out windows 8 64bit driver for my printer HP LaserJet p1005. The windows 7 driver doesn't find my printer.
Please tell me at least how much longer will it take to come out, so I can take the appropriate measures to be able to print when it's important.

Hi pefo_1,
Maybe the next steps helps
To install on Windows 8 apply the following steps:
1. Download the driver that is available on the HP site:
  Basic Driver Plug and Play for HP LaserJet P1005
ljP1000_P1500 HB-pnp-win64-en.exe-[1/1, 3.54m]
Note: Download this file to the Windows Desktop.
2. Then select the downloaded file with the mouse right click Properties.
3. Select the tab that says Compatibility.
4. Then check the box that says "Run in compatibility mode for" and select Windows 7
5. Under Privilege Level check the box that says "Run as administrator"
6. Click OK to close the Properties window.
7. Then double-click it on the downloaded file to begin the installation.
Note: Remember that the USB cable must be unplugged before installation.
It should appear as follows:
I hope these steps will be helpful with the Windows 8 installation of the Laserjet P1005 printer.
* Click on KUDOS star to say thanks
* Click on the button Accepted Solution if the question is answered.
Cheers,
ferRX.

HP Color laserjet 2840 Windows XP (under VMware Fusion on a Mac).

I have been using this printer succesfully for years and now all of a sudden when installing it to a new machine it keeps giving the error " page to complex" then refuses to print this is the first time i have used it via a usb port as it has always been on the network via a hub. i have tried to revert to the hub but it will not install "no printers found " etc etc.
Is there a series of key pushes on the printer that will remove everything from memory and allow me to start again?
i thought i had cured it but a spurious printer keeps installing itself in the printers and faxes (color laserjet 2840:#1
any advice would be great thanks
Tommo50

The cable for your card reader has been knocked lose - if you pop the side cover off you can put the cable back on. If the cable is firmly attached, then the card reader has died. There was supposed to be a 2830 released that had the fax but no card reader but at some point they canceled that decision. However the firmware was written for all 3 models, so when the printer sees a fax but no card reader it reports itself as a 2830.
The squeaking carousel and not pulling from tray 2 means it needs servicing by a genuinely trained HP tech on that particular model. Tray 2 should be easy enough to fix, but the carousel may need to be realigned and that is not an easy job. You may have to call around or go out of your way, but find a service center that is certified in this model printer.
I've worked on this models myself for a couple years - if you think one squeaking carousel is bad, try listening to 4 or 5 of them all at the same time!!!
insert signature here

Looking for Driver for HP 3500 Color Laserjet for Windows 7. Is there a Generic I can use?

I've been checking HP for 18 months and can never locate a driver for this Printer. Does anyone have any suggestions?

Hi,
Unfortunately your product is not supported by Windows 7, and will not be supported in the future, as you may find by the document below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet 200 Colorful MFP 275nw windows 10 driver unavailable!

Just upgradded to Windows 10 from Windows 7. Driver for my printer (above) is listed as "unavailable" in Windows 10. Anybody know when it will be available? Thanks Rob

please help

Hp LaserJet 4350 windows 7 driver issue

The driver installed from windows update (3.18.2008, I think--hpc43506.gpd?) seems to have a problem. I tried printing to two separate 4350 printers. I ended up installing a pcl5 universal print driver from the HP site. I was wondering if this is a known issue? Is it just me?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP color laserjet 2600n windows 7 printer not installed problem with spooler.

My computer will not recognize my printers. Nothing new was installed, just all of a sudden, they were gone . Have installed new drivers, and had a very knowledgeable person look at it-nothing. Very frustrating. Have a program that has been on it from the beginning and now it won't work (quark). Don't know where to turn. Am doing a windows defender scan for viruses as we speak. Help!!!!!

Could be a lot of reasons. First try to print a supplies status page- If that prints with color on it, you have a driver problem.

Laserjet 1000 - windows 7 driver solution

All
I have just succesfully found a solution to making the laser jet 1000 work under windows 7 64bit
The trick is that you need a GDI driver and finding a supplier ( other than HP ) who has built one.
Go to the following link and download the windows 7 64 bit driver for the following printer
http://onyxftp.mykonicaminolta.com/download/Search.aspx?ht=
search desktop printer -> magicolor 2430DL ->drivers -> windows 7 64bit ( or whartever windows version you need)
KONICA MINOLTA magicolor 2430DL
install the drivers
Add the printer as you would normally and then open the print queue window and
under printer properties select advanced and under print processor select winprint raw
The reason this works is that this printer uses the same hardware GDI engine as the lasjet 1000
Enjoy
Anthony

The way I have it set up is that my laserjet 1000 is plugged into a seperate old PC running windows 2000 with laserjet 1000 drivers loaded on it as its shared by various household computer ranging from Macbook to XP and now windows7.
I connect to it on windows 7 by adding a local printer and direct mapping it by creating a new port and putting in the box
\\servername or ip address\printersharename
i.e
\\\Printerserver\Laserjet1000
set up the properties as I precviously described and it works fine
Note direct USB connection does not work
If I have some time to kill , I'll see if I can get the direct USB to work
Anthony.

Color laserjet 5m windows 7 x64 driver

Similar Messages

Maybe you are looking for