Color LaserJet CP3505x missing yellow when printing

On of our two Color LaserJet CP3505x does not print yellow. The other 3505x prints CMYK just fine. Maybe the Easter bunny stole all the yellow. Jokes aside, I've tried a brand new toner cartridge (Q7582A) but no sigar. Any suggestions will be appreciated.

There are a couple of reasons that could be happening. It could have something to do with the connection, or perhaps the program you're printing from. Try to go to the link I'm including below and follow the steps there, and hopefully this will help you resolve your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01608943&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
Although I am an HP employee, I am speaking for myself and not for HP.

Similar Messages

  • Color covering the whole pager when printing

    My color laserjet 4600dn, the Magenta color cover the whole paper when printing, and some yellow color spots on the paper too. Is something wrong with the transfer belt? Please help!

    Also, the best way to do this is not to adjust the black and white levels but to adjust the opacity of the image. You will need to make the background layer into a regular layer (double click it in the layers palette and say yes to the dialogs), then use the opacity slider to lighten it.
    Or alternatively you could add multiply layers till you reach the required lightness, then flatten the image.

  • HP Color LaserJet Enterprise flow My Multifunction Printer series

    I have a new HP Color LaserJet Enterprise flow M880 Multifunction, the delivery paper after the fuser, it is no making the right job and I got a jamming code, I replaced the fuser but still making the same issue.

    Hey @Germanimagenet ,
    I suspect your question would be better answered in the HP Enterprise Business Community, as your HP Printer is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP Color LaserJet Enterprise flow M880 Multifunction Printer series page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    I worked for HP.

  • My HP Color Laserjet CP 1215 recently started printing crooked.

    My Printer at work, HP Color Laserjet CP1215 recently has started printing crooked.  I have open all doors to check for anything stuck in the printer that could be causing it to print crooked. 
    Any suggestions would be greatly appreciated as I am not getting anywhere with what I have found on the website.
    Tawnya Slagle

    Hi Tawnya,
    A couple of items come to mind that we can check:
    1) Paper type/specs  Make sure you're using recommended paper type for this product.
    2) Remove, restack and reload and check paper guides in the tray to ensure the guides are against the paper and if available, restock with some fresh paper.
    3) Have you recently experienced a paper jam?  Were you able to remove the page intact?  If not, there still may be a small piece of paper lodged in the printer causing the skew.  
    4)  If the above steps don't resolve, I might recommend a calibration, steps listed below.  
    Best of luck!!
    Follow these steps to calibrate the product.
    Open Toolbox .
    Windows XP: Click Start ( ), click All Programs , click HP , click your product, and then click HP Color LaserJet CP1210 Series Toolbox .
    Windows Vista: Click the Windows icon ( ), click All Programs , click HP , click your product, and then click HP Color LaserJet CP1210 Series Toolbox .
    Click the Device Settings folder, and then click the Print Quality page.
    Under Print Quality , click Calibrate next to Calibrate Now .
    Click OK when the 'Your request has been sent to the device ' message appears on the computer. The calibration process begins.
    NOTE:Calibration might take 2 to 3 minutes. Do not turn the product off during calibration.
    When calibration ends, try printing again.
    If the issue is resolved, stop troubleshooting.
    If you are still experiencing print quality issues, repeat steps 1 through 5 in this solution. You can recalibrate the printer as many as 3 times.
    (Although I am employed by HP, I am speaking for myself and not for HP)
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • HP Color LaserJet 2600n and HP IP Printing

    I was having trouble configuring my HP Color LaserJet 2600n for HP IP Printing. The following steps resovled the problem. Perhaps others may find this useful.
    I just purchased an HP Color LaserJet 2600n printer at CompUSA. I was able to successfully connect it to my network and print using Bonjour Printing (from all of my various iMac, iBook, PowerBook and MacBook computers), but was not able to configure it for TCP/IP printing. To solve the problem,
    1. I visited the HP website and downloaded new firmware for the printer:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=446154&prodTypeId=18972&prodSeriesId=446153&swLang=8&taskId=135&swEn vOID=219
    There are 3 files there, I downloaded and installed all of them in the following order:
    2. HP Color LaserJet 2600n Printer Firmware Update Utility - for some reason, the firmware on my new printer was from 2005 even though HP had posted new firmware as late as Dec 2006.
    3. HP color LaserJet 2600n DC controller firmware update utility - a firmware update that addresses a ghost-image issue.
    4. HP Color LaserJet 2600n OS X Universal Binary Full Software Solution - an updated set of drivers.
    After all firmware and software was successfully updated....
    5. I opened /Applications/Utilities/Printer Setup Utility.app and click the "Default Browser" button at the top of the page.
    6. Clicked the "More Printers..." button at the bottom of the page.
    7. Set the popup at the top of the configuation pane to "HP IP Printing" and clicked the "Manual" button immediately below it.
    8. Entered the local network address for my printer (xxx.xxx.xxx.xxx) and clicked the "Connect" button. The rest of the information in the panel was automatically filled in for me.
    9. Clicked the "Add" button. The printer was added to the list of available printers in the Printer List, although the name of the printer is set to the ID that is configured in the printer firmware.
    10. Select the new printer (NPIA0853X in my case) and click the "Show Info" button in the Printer List toolbar. Move the popup on the dialog to "Name and Location" and enter an new name (e.g., "HP Color LaserJet 2600n").

    Download and run this on the XP machine.  I suspect a security system update or change, but let's let the utility tell us.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I'm trying to print a pdf I created and posted on my website, it looks good online but is missing data when printed, help.

    I'm trying to print a poster I created and posted on my website, it was created in power point, saved as pdf, and uploaded using wordpress. It looks good online but is missing data when printed. It contains almost all the information except for about 6 lines, which happen to be important. Any thought are appreciated.

    No its weird, everything was the same. I sort of resolved it, since he can view the PDF fine on his comupter but also wanted to print it, I just exported all the slides as JPEGS and made a new InDesign book with those on the pages and exported that as a PDF. Seemed to work for him, I just don't know what happened!

  • Booklet printing HP Color LaserJet CP1514n missing

     Printer Type HP Color LaserJet CP1514n.Service ID: 19027 Firmware datecode: 20130923 Start condition : Win7 (64-bit). HP UPD version: 6.0.0.18849  61.175.1.18849Action:  Print in any application - Dialog : Print properties --> Finishing-->Pages per sheetExpect: "2 pages per sheet" Option:  Booklet Mode: ...Get: NO booklet mode is availableProblem: Option for Booklet mode is no longer possible. Previous situation: Win 7 (32bit) in identical laptop. Booklet mode printing was possible at all time. I have updated the printer firmware once and the Win drivers twice. Normal printing is OK. But the much-used and loved booklet option is sorely missed!Thanks!

    Hi , I see that you are missing the Booklet mode when using another Laptop running Windows 7. I would like to help you.
    I checked the web site and see that there are basic drivers available for the printer as well as the Windows Update drivers.I would suggest to try the basic drivers, they may have been the ones installed on the other Laptop and not the Updates.Try the HP Universal Print Driver for Windows PCL6 (64-bit) and the HP Universal Print Driver for Windows PostScript (64-bit) to see if the Booklet option is available. HP Universal Print Driver for Windows PCL6 (64-bit). If you appreciate my efforts, please click the 'Thumbs up' button below.If you have any issues, please let me know what steps you have taken and the results. Thank You.

  • Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

    I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server.  I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers.  Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer.  I have even tried the generic 32 bit PS and it says the same thing.  Any ideas on what I am doing incorrectly or where to get the drivers that I need?
    Thanks,
    Gary

    Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

  • Hp Color Laserjet pro M177fw won't print double sided anymore

    Hello.   I have a Hp Color Laserjet pro M177fw until about three weeks ago it would print double sided no problems.  I have used this printer on my pc and now my mac with no problems previously.  I am running a Macbook Pro (less then six months old) which is running 10.10.1 (Yosemite).  I attend college and I know at the end of last quarter during finals week (Dec. 15th) I still had the ability to do 2 sided printing.  Sometime between then and the new quarter starting last monday I lost the ability to do 2 sided printing.  After scouring the internet I have tried everything they suggest:
    Uninstalling printer and reinstalling
    resetting the printer setting on the mac and then reinstalling printer
    resetting the printer settings on mac, rebooting and then reinstalling printer
    installing older drivers( hp automatically installs newest drivers even if you use an older driver file)
    resetting physical printer to factory default and reconnecting to wireless network.
    repairing the disk permissions
    The only new software I have installed on the computer in the last three weeks is Adobe Creative Cloud and the printing problem preexisted that installation. 

    Hi @Arboria9 ,
    I see that you are experiencing issues printing two-sided from Yosemite. I would like to help you resolve this issue.
    You have pretty much have done all the steps that I would have provided.
    Are you still able to print two-sided from the Windows computer?
    Are you missing the option to select two-sided printing in the print driver?
    Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen it should show the printer's name. (Officejet 6500)
    If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    How was the printer name listed?
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I prevent the Darker Shade Box (color shift) around Vector Objects when Printing

    Sorry in advance for the novelette. I am absolutely mystified and frustrated and would love some help! I've been working on this problem for about 30 hours over the last 4 days to figure out what the heck is happening and cannot find an answer through various forms of research.
    Basically, when I print a JPEG, I am getting this area (a box) of darker shaded coloring around my heart and love text.  I've tested it a million different ways and am at a loss as to what the problem is ... is it an application problem, a color profile problem between my applications and printer, an improper way that I saved my file, etc.
    Here is a photo I took of the image printed out (so it is slightly skewed from camera distortion):
    The details:
    (1) I create graphic art and sell it online. I save all of my printable art as JPEG files because of my customer base (diy hobbyists that print on their home printers without much knowledge base nor graphic design software).
    (2) I use both Adobe Illustrator (AI) and Photoshop Elements 11 (PSE11) to design and save my artwork.
    (3) I insert JPEG images into Microsoft Word 2003 documents to "test print" since most of my customers use home printers to print. Since most people have this basic software, it is a good gauge of the kind of print out they might get using the same or similar software.
    (4) My PSE11 color profile setting is the default sRGB. I have test printed many times and I get the truest colors with this color profile.
    (5) My AI color settings are normally also an sRGB color mode, but on occasion, I use a CMYK color mode if I am creating a larger document that I know the customer will need to take to a professional printer to print out.
    (6) I do my home printing (for proofs) on an Epson Stylus Photo 1400 (which has the 6 color ink cartridges).
    (7) Until this printing problem occurred on this test print out, I always used the "photo enhance" option when I designate settings for my printer via the Microsoft Word documents.
    IMPORTANT: This is when I have the color shift?? or color rendering issues?? and it is the only time. If I use the regular ICM/ICC color profile of sRGB, the printing issue doesn't occur. Instead, I have a solid color background instead of this one with the strips of lighter color on the top and bottom.  However, I can't control how the customer prints, so I need to feel confident that whatever color profile setting they use, they will not run into this problem.  I even test printed the documents over at FedEx and the darker box/color shift did not occur.
    (8) The document in question only has 3 sets of objects: the heart, the solid colored rectangle colored background and the text.  All 3 objects are vectors, they are at 100% opacity and there are no "special effects" applied.
    (9) The image was entirely created in AI this time and exported as a maximum quality JPEG file, although you will see below that I tried many ways to create and save the file so that I didn't have the color band borders on top/bottom.
    (10) I regularly use AI for part of my art, then I drag it to my PSE11 open document and it becomes a Vector Object (it cannot by copying/pasting into a PSE11 document).  I also regularly export AI images as PNG files, then insert them into an open PSE11 document. This printing issue has not occurred until recently.  Here is an example of a very complex AI image I created, then inserted into PSE11 just to add the background (the Teddy Bear and books are AI vector objects) that were exported as PNG files then inserted into PSE11 to integrate with the background image - I test printed with Photo Enhance and had no printing issues:
    So, from the research I have done, it looks like it is a color rendering or color space issue with conflicting color profiles in the same document. I checked my color profile settings and both sRGB and CMYK were set to embed ICC color profiles.
    I tried changing AI settings to Preserve Numbers (ignore linked profiles) for CMYK, but that didn't work.
    I also checked and made sure that not only the document setup showed the sRGB color profile, but that all the objects within the document also were converted to sRGB as well for consistency. That didn't work.
    I tried converting the document to CMYK along with the vector objects. That didn't work.
    I tried saving the heart image as a PNG file alone, the "love" text as a PNG file alone, both the heart and text together as a PNG files alone. Once saved as PNG files, I inserted them into an open empty PSE11 document - as I normally do. I then added the background color I wanted. That didn't work - the print still showed the color changes.
    I tried dragging each vector object separately and even as a group and got the same color change issue when printing.
    I tried "expanding" and "outlining" the text before exporting as JPEG, before exporting as a PNG and before dragging as a vector object into PSE11. Expanding the text did not help the situation.
    I tried exporting as Adobe PDF, then opening in PSE11, then resaving as JPEG. That didn't work.
    I tried flattening transparency (even though there is no transparency in the AI file). That didn't work.
    I tried rasterizing the image. That didn't work.
    Thinking that the file might be corrupt, I started from scratch and redesigned the same heart and love text.  Unfortunately, I had the same problem as before.  At this point, my AI started becoming buggy and would not open new files. It happened repeatedly and I decided it was best to uninstall and reinstall AI (and maybe that would fix the problem).
    I created just the heart in AI, then inserted it into an open PSE11 document (both after exporting as PNG and also by dragging as Vector Object from AI). It seemed to work. I could both drag the vector into PSE11 from AI and export from AI as a PNG, then insert into open PSE11 document with a background color - and it printed a solid background.
    So, I thought that reinstalling and setting back to defaults worked. But, then I added the love text around the heart and tried exporting as JPEG files and the same problem continued to recur. Whether I dragged as a Vector object into PSE11 (the heart object and love text separately and also another time with the vector objects dragged as a group) or saved them as PNG files and inserted into PSE11 - I got the different shades of color on what should be a solid background. I even tried saving the PSE11 as a PSD file first, then resaving as JPEG and I tried saving as PNG and printing and this didn't help solve the problem.
    I really think it is some color conflict issue but I can't figure it out. I am definitely not very knowledgeable about color profiles and how to sync all my devices, however, as I mentioned, this was not an issue until recently (and I think??? I recall changing the CMYK setting from Preserve Numbers to embed color profile a month or so ago - however, it should have been solved when AI went back to its defaults upon reinstall).
    The reason I believe it is a color rendering/color space issue is because I could see the color output when I saved the JPEG with CMYK color profile versus sRGB color profile and the sRGB colors were much richer, not surprisingly. The top and bottom colors matched the sRGB printout and the middle darker box section matched the CMYK printout.
    I am sure it is something fundamental or simple and I am completely overlooking it.  I wish it were just a transparency issue, because people know how to fix or do workarounds for it. But, there are no vector objects with any transparency ...
    If I missed some detail, I apologize. Any help would be a dream come true at this point! lol
    Thank you!

    Okay, I got motivated to try again.  From doing a bit more research on troubleshooting AI printing problems, the Adobe article talks about print drivers. It was advised to uninstall and reinstall the print driver if the printing issue persists. So, I did. Unfortunately, I still had the same result after reinstalling and trying a test print! Ugh.
    So, as Jacob said upfront, I seem to have an overactive print driver that is trying too hard (and it is a non-postscript printer which I realize is part of the problem).
    There are so many variables in my situation as to how I create art and save/export art. I sometimes work solely in AI, sometimes solely in PSE and sometimes I use both programs to create. Consequently, I will:
    (1) export directly from AI as JPEG if I am not adding PSE11 artwork.
    (2) export directly from AI as PNG  if I plan on inserting that image into PSE11 to add to artwork I have created in PSE11.
    (3) drag vector objects as a Smart Objects directly from AI to PSE11 to add to artwork I am creating in PSE11 if I know I will playing with the vector object and resizing in PSE11.
    So, I did a test print using scenario 2, where I inserted the heart and love text PNG (AI created vector object) into an old PSE11 document. This old document already had a vector object from AI with a solid background and I knew it printed correctly. So, after inserting this new PNG from AI into this old document, it printed correctly using the photo enhance mode.
    However, I haven't had a chance to actually create new art in the older AI files (that I know print properly), resave as something else and try another test print (either by exporting as JPEG and printing in Word or by exporting as PNG file and inserting into PSE11 document, then saving as JPEG and printing in Word).
    After testing the different possibilities of ICM settings within my printer, I found that the JPEG images printed out with the truest colors and best quality if I simply selected "no color management" from the printer. Shocker, huh? lol
    MY SOLUTION: So, what I think I will simply do is add an instruction sheet with the printables I sell, explaining that the color profile setting should never be handled by the printer so make sure to turn off color management by printer (and if they feel they must use the printer for color management, make sure the setting is sRGB since I embed that color profile in my JPEG's).
    Edited to add: Since my issue was never about how I could print a successful image (I knew I could simply change the color profile settings), but rather about how to make sure that customers would get consistent and high quality print outputs of my digital images, this seems like the best approach.
    I don't think I will every really know exactly why I am now getting color shifts in the "photo enhance" mode when I did not have this problem a couple months ago - applying the same methods of creating artwork. I was concerned that I was saving/exporting using incorrect or mismatched color settings or something of that nature.  However, since I went through the process of making my color spaces the same for everything, and I still have issue, clearly that is not the culprit. The only thing I can do to solve the problem and it is a straightforward solution anyway -> is to educate the buyer on how to print successfully (don't use photo enhance! ha ha).
    Thanks again to everyone who chimed in and offered advice!

  • HP Color LaserJet CP2024 dn not showing Printer Shortcuts

    Product Name:  HP Color LaserJet CP2025dn.
    Operating System:  Windows 7 Professional
    I recently had a hard disk failure and am reinstalling everything on a new hard disk.  In setting up my HP Color LaserJet CP2025 dn the Properties screen is missing the tab for Printer Shortcuts.  It has all of the other tabs. If someone could please tell me how to get it back I would be most grateful.  
    Thank you.

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color Laserjet 2550n has no more printing on both sides

    In 2005, I bought an HP Color Laserjet 2550n to go with my laptop.  I had no printer problems.  I loved the feature where I could print a document on both sides of the paper.  The option would show up on the properties menu on the print document dialog window.
    Over the past summer, I lost my laptop to a crash and had to get a new laptop using Windows Vista OS.  I hooked up the printer using the USB port and all seemed good until I tried to print on both sides.  In the properties menu of the printing dialog box, the option has disappeared completely!  I tried updating the drivers - didn't fix it.  I tried reinstalling the software that came with the printer, but Windows Vista OS wouldn't accept it.  Help!  I don't know what else to do.  I appreciate any help.
    I have also tried Bob_Headrick's advice on Vista Duplex Printing Troubleshooting Guide for "No option for two-sided printing."  The option appeared in the properties menu, but the printer still did not print properly.
    Musicredsubaru
    Message Edited by musicredsubaru on 10-12-2009 08:18 PM

    Sorry guys................I answered my own question.
    I went into the HP P2015 user guide & found the answer. on page 32.
    I went into printer properties, device settings, noticed that duplex unit for printing on both sides was showing as "not installed". I changed this to "installed", and it worked.

  • HP LaserJet 1536 - grey background when printing pdf files

    HP LaserJet M1536dnf MFP, Windows 7 32-bit
    Firmware data 20140123
    The latest drivers from official site (HP Universal peinting PCL and Universal printing PS v 5.8.0)
    When printing pdf files from Acrobat Reader, Adobe Acrobat or FoxIt the grey background appears on the paper.  The content of the file is printed normally. Printing from the other sources (Word, Excel, NotePad) is OK
    This question was solved.
    View Solution.

    Hello, 
    If your PC works on Windows XP, then you might try downloadin the hotfix available @ Microsoft.
    Url :
    http://support.microsoft.com/kb/971250
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HP officejet Pro 8000 Can't print when color cart is empty enven when printing in grey scale

    I do not use color in my printing.  Nonetheless when the printer says my color cartdridge is empty I can not print.  I spent a $100 on color cartdridge and never used them.  They now show empy and I can't print.  Is there a work around or should I just junk this printer.  Thanks for your help.
    Bob

    Hello Bobmcclammy,
    I can understand the frustration when the printer, in your case the Officejet Pro 8000, stops and tells you to change inks you are not even using. I too have fought with this in the past. Unfortunately, there is no "work around" for such an issue, at least that I have been able to find.
    Even when printing black text only, for example, a resume, the printer will be using a subtle amount of color as a base. Printhead maintenance also will chip away at the ink, this is to ensure the ink is not drying up within the print system. This information will explain more: Ink Usage in Inkjet Printers.
    What I have done in order to get the most out of the printer ink is, set the printer in a black only grey scale mode. This needs to be set in the printing preferences in the print driver installed on the computer.
    The inks will still need to be replaced, but it should help for the future.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Pages 5.2 Table missing text when printed

    I created a document with several tables.  These tables contain algebra formulas with superscript.  I read in another forum that the issue may be the use of the superscript.  However their problem only occurred when printing the document as a PDF.  I am having the problem printing from both Pages and as a PDF.  Some superscript appears as it should.  Not all missing text is superscript.
    Any ideas?  I hate to have to recreate this document in Word.  I took me forever to create.
    Mavericks 10.9.3
    Pages 5.2

    Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
    You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
    LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

Maybe you are looking for