Color Laserjet Pro M277dw making weird noises when printing

Hello Everyone, At my office we bought the Color Laserjet Pro M277dw printer last week, and since then everytime we print, the printer makes really weird noises. We checked inside but everything inside looks to be okay . Here you have the link with an audio I recorded with the sound it makes. Thank you very much and it would be great if you guys could help us to find a solution! Best, Lorena 

Grinding can only mean physical damage to the printer.  You need to isolate the sound and replace the part to resolve the problem. The good news is that this is a new printer and will be covered by the warranty.  Contact HP directly and have them run you through the options.  It shouldnt cost you anything, but you do need to contact them directly.

Similar Messages

  • Color LaserJet Pro MFP M176n installed but not printing

    Hello Everyone,
    I have problem with my printer Color LaserJet Pro MFP M176n.
    at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
    Please help......
    - Windows is windows XP 32bit
    - Printer name   Color LaserJet Pro MFP M176n PCLms
    Thanks
    I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
    Wael Hilal

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP LaserJet CP1525nw makes terrible swealing noise when printing

    Product:  HP LaserJet CP1525nw
    OS:  Windows 7
    Error Msg:  none
    The product makes a loud squealing noise when printing.  It also leaves streak marks on envelopes.
    Product was purchased Dec. 21, 2010, so is only a little over one year old, but is out of warranty.
    Please also advise where I can find authorized HP LaserJet repair in Brooklyn, NY.

    Hi Grey_Ghost;
    Hope you are doing and sorry that you are having this issue;
    Call here : 1-800-625-0242  
    They may be able to guide you or provide with that information.
    I did Google search and found a few in the New York city area Perhaps doing this may help you as well; 
    Hope It helps; 
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • Hp color laserjet 2600n, very dim grayish film when printing black only

    For some reason, my hp color laserjet 2600n has started printing with a very dim grayish film over each page. I've had this printer for about a year, and it didn't do this at first. Does it no matter what program I print from. I'm sure it's a setting issue, but haven't been able to figure it out. Any ideas?
    And, when I select to print in black only, it still prints the color on web pages. Is there a way to print from only the black cartridge? These are the options in the printer dialogue box under color: print in grayscale, black only, 4-color. Under these settings are other options, edge control, half-tone and RGB color. I've tried each setting individually and still the gray film. The only other possibility I can see is under Print Options, it has draft quality or image quality. I've tried both and still the film.
    Have any ideas.

    1. take out all of the ink cartriges and look at the big black roller on the door for streaking, if streaking, clean with a lint free cloth dampened with windex (window cleaner) then close the door.
    2. let it run to initializing.
    3. open the door and look and the black roller on the door to see if you have streaking. If no streaking put one cartridge in and close the door and repeat the steps until you find what cartridge is causing the problem.
    I did this and found that my cyan was creating the lines on my paper. I cleaned the cyan roller with a Qtip and some rubbing alcohol and it works fine now, no more lines on the paper.
    Cheers

  • Why does my ipod touch keep making weird noise when i plug in my headphone and when i put music it sound fuzy

    The other day when I was on my iPod touch (8 GB) I put on music but then something when wrong. When I plug in my headphone and put music on, it sounded like I was hearing music under water, and it sounded fuzy and weird. Then I unplug the headphone from my iPod touch (8 GB) and I got my computer and plug in my headphone and put music, and it sounded fine. What should I do about this?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • HP Color LaserJet Pro M252dw Driver Error

    HP Color LaserJet Pro M252dw Driver Errors out when laptop is turned off. What is causing the printer to lose it's Print Driver? Windows 64

    Hi , Welcome to the HP Forums! I noticed that you are having driver errors with your HP Color LaserJet Pro M252dw, and I am happy to look into this for you! Some questions for you: What is the version of Windows you are using? ie: Windows XP, Vista, 7, 8, 8.1, etc. If you do not know the Operating System you are using, please visit this website. Whatsmyos.What is the exact error message you are seeing?How is the printer connected? Wireless, or USB? If you can take a screenshot of the error that would also help. See this post, How to take and post a screenshot on HP Support Forum, by . In the meantime, please try the HP Print and Scan Doctor, and let me know the outcome! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums.   Once I know more information, I will do some further research for you! Thank you for posting, and hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • Un able to install Scan to Email app on Color LaserJet Pro MFP M177fw

    Hello!
    I recently purchased  Color LaserJet Pro MFP M177fw as my home printer.
    Main thing i was looking for was Scan to Email feature.
    As I read in specifications provided in this product description I see:
    http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
    Digital sending standard features: Scan to E-mail by HP SW; scan to application by HP SW ; scan to file by HP SW
    Once I try to install Scan to Email app i get following message once i try to install app:
    What is wrong, that i cannot install app that was one of main choice points of this printer.
    TWAIN and using computer scanning process is clear, so no need instructions how to scan using computer.
    I especially need fucntion that i scan document on printer, then enter email and its emailed.
    Thank You in advance for clarification,
    Martins

    Hi MrJansons,
    There are a numerous ways to scan and email from your printer. Please go through the below links.
    Make sure you have installed the software driver for your printer on your machine and then follow any of the methods to scan and email.
    http://support.hp.com/us-en/document/c03476857
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • HP Color LaserJet Pro MFP M277dw digital sending feature

    Does the HP Color LaserJet Pro MFP M277dw support the scan to file over network feature? 
    I have a Windows Server with a file share, and I want users to be able to scan documents to the file share. Can I do this with this printer??
    Kindly help...

    John_Getzke, Thanks for your suggestion. However, I was using administrator accounts. I tried to create a new administrator account to do it again, but got the same result. lateblue

  • Good evening every one! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me

    Good evening ! recently, i noticed that my macbook pro make a weird sound when i open the screen, it's like there is something keeping the screen from moving correctly.the little noise comes exactly from the left side of the axis.please advice me what to do
    (i live in morocco and i need to know where i should take ma macbook to get it fixed and if the warranty take this problem in charge)
    thank you in advance
    macbook pro mid2012 i7 (here is my e-mail adress : [email protected])

    You should take it to an Apple store or an AASP (Authorized Apple Service Provider) Carefully inspect the hinge joint and make sure there is no debris that you can see, you can try carefully sliding some sticky tape thru the joint to clear any loose stuff out. But this sounds like there might be more going on here, and the hinge is something that you do not want to fool with.

  • HP Color LaserJet Pro MFP M277dw Installation Issue

    Hi, I purchased a new HP Color LaserJet Pro MFP M277dw yesterday, and is having difficult time installing the driver. I tried downloading it online and using the CD that came with it. I have also tried to install in two different computers, one is a desktop with Windows 7 Home Premium, the other is a notebook with Windows 8.1.  In all instances, it stops at "preparing for installation" stage with an error message that reads "A probelm occured while preparing to install software to your system. Please restart your computer, and run this installation again. If the problem persists, please check the product support web site for your product". I tried to restart the computers many times, and I have also tried to change windows "User Account Control Setting" to the least sensitive level, but still to no avail. I need help! Thanks,lateblue

    John_Getzke, Thanks for your suggestion. However, I was using administrator accounts. I tried to create a new administrator account to do it again, but got the same result. lateblue

  • HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

    Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
    HP Color LaserJet Pro MFP M177fw) is not working with this OS.
    Give me a urgent solution

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Doesn't feed paper. color laserjet pro mfp m177fw

    I just bought the Color Laserjet Pro MFP M177fw. I removed all the packing as instructed in the installation guide.
    While initializing the printer makes a strange noise. When I try to print it gives me a message to load paper. No matter how much paper I load in tray 1 it gives me the same message.  I removed the paper and tray 1. Then using a torch I looked in the bin and I don't even see the white metallic rod  moving when I give a print command. I suspect that there is something stopping the metalic rod from rotating. I see two black clips on both ends of the rod. Manual didn't mention it but was I suppose to take them out? Or there is another problem?
    Need help.
    Thanks
    FKK

    Hi @fkk ,
    I read your post and see that the new printer is initializing and the printer makes a strange noise. You are also getting the message to "load paper". I would really like to be able to help you resolve this issue.
    It sounds like there might be some more packing material inside the printer.  Please check and remove any packaging material inside the printer. Here is a document for Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw.
    Please check your private messages for additional steps to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    If you appreciate my efforts, please click the Thumbs up button below.
    Thank You. I look forward to hearing from you.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

    Hi there,
    I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
    When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up?  Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
    Any ideas? Any help would be greatly appreciated
    thanks!
    Simon

    Hello @Simonjayh,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
    Step 1: Uninstall Drivers:
    First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
    Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
    Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP Color LaserJet Pro MFP M177fw don't go to sleep mode

    Hi and sorry for my english In settings of HP Color LaserJet Pro MFP M177fw I tryed 15 and 5 minutes before sleep mode. After 15 or 5 minutes printer going to sleep, but if I'm used printer even only one time, after that he don't sleep ( printer's screen not dim), not after 5 and 15 minutes. Printer is connected through wi-fi, Windows 8.1 x64. Any ideas?)

    Hi Denis88,
    I see by your post that the printer isn't going into sleep mode.
    I can help you with this issue.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
    I would update the printer's firmware if the printer won't go into sleep mode.
    HP Color LaserJet Pro MFP M177fw Drivers.
    Select your operating system, click next, click the link for firmware.
    I have provided some information from the manual for the sleep mode that you can check out.
    COLOR LASERJET PRO MFP.
    EcoSMART Console: Change the default times for entering Sleep mode or Auto Power
    Down mode. Configure which events cause the product to wake.
    Printer Settings Auto-off Configure the product to automatically turn off after a period of
    inactivity. You can adjust the number of minutes after which the product turns off.
    Touchscreen control panel:
    1. From the Home screen on the product control panel, touch the Setup button.
    2. Open the following menus:
     System Setup
     Energy Settings
     Sleep/Auto Off After
    3. Select the time for the Sleep/Auto Off delay.
    NOTE: The default value is 15 Minutes.
    4. The product automatically wakes when it receives jobs or when you touch the screen on the product
    control panel.
    You can change which events cause the product to wake. Open the following menus:
     System Setup
     Energy Settings
     Wake/Auto On Events
    To turn off a wake event, select the event, and then select the No option.
    Hope this helps resolve your issue.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color Laserjet PRO MFP M177FW Cannot connect to web services

    I bought a HP Color Laserjet PRO MFP M177FW  today and I set up it. It can print and scan over wireless network. However, It cannot connect to web services correctly. I set the DNS numbers with google DNS addresses. I changed its IP address with manually. The IP address is unique. Normally It doesn't enable/remove webservices. But when I restart it, it can do for few minutes. It can take an e-mail address but It doesn't print any information sheet. When I try to print a sheet It says "Connection Problem" at first few minutes and later it says "Connecting"and it waits, there is no error message. What am I suppossed to do? Please help me. 
    This question was solved.
    View Solution.

    Hello rasitbolukcu,
    Welcome to the HP Support forums.  I understand that you are having difficulties enabling the web services for your Laserjet Pro MFP M177fw printer.
    I appreciate all the information you gave me, it makes it much easier to assist you with the troubleshooting. I have included the Getting the Latest Firmware and Product Updates document.  It will walk you through ensuring the printer has the latest firmware.  Once you have updated the printer, please try to enable the web services again. 
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for