Color LaserJet Pro MFP M176n installed but not printing

Hello Everyone,
I have problem with my printer Color LaserJet Pro MFP M176n.
at thebegining i try to install it buteverytime i run the installer it give me HP Installer error, so i installed the Microsoft Net Framework 3.5 and run the install and it was working perfict, i install the driver on USB cable and after it show me successfull and print test page and finish, so i click print test page and in printer and fax the printer M176n Show 1 printing job and then 0 but no print came out i try again same, i remove the cable and plug it again the printer is responding perfictly but still not printing i check the scanner and its working fine but only the printing is not, so i try to install it through network and it was sccessfully installed with IP but when i print, still the same 1 printing Job but nothing came out of the printer when it came 0 printing job.
Please help......
- Windows is windows XP 32bit
- Printer name   Color LaserJet Pro MFP M176n PCLms
Thanks
I did try to use Scan Doctor, the printer didnt print at the first check but when it ask forenternal print test page it printed then it ask me toif it print of not and i click yes it print in enternal print so it ask me to remove and reinstall so i did 2 to 3 times and still same will  not print but when run Scan doctor it will print on enternal print .....
Wael Hilal

Hello @ Averus89, 
Welcome to the HP forum. 
I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
I would like to help you with this issue. 
If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
would set a manual DNS. 
I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
The DNS to try is:
Primary: 209.244.0.3
Secondary: 209.244.0.4
Set the DNS then try printing the web services info page again. 
Let me know if this helps. 
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Color Laserjet pro MFP M176n control panel not working

    the control panel in the Color Laserjet pro MFP M176n is not working, is all blank, i can´t see anithhing in it. Is there a reset button or should i take it to the store where i buy it for a checkup?
    thank you

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP COLOR LASERJET Pro MFP M176n

    Hello
    Is the printer HP COLOR LASERJET Pro MFP M176n PCL5/PCL6 compliant?
    I searched in the HP website and it says PCLm/PCLmS in one link and PCL 3 GUI in another link.
    Also advise what is PCLm/PCLmS?
    PCL 3 GUI :
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03894363&lc=en&jumpid=reg_r1002_us...
    PCLm/PCLmS:
    http://www8.hp.com/in/en/products/printers/product-detail.html?oid=5303442#!tab=specs
    Please advise which is the correct one.
    Thanks
    Subbu

    No idea which is the correct specification.
    But none of those Page Description Languages are compatible with PCL5 or PCL6 (a.k.a PCL XL).
    I can't be certain, since (unlike with PCL5 and PCL6) HP does not appear to publish specifications of these PDLs, but as far as I'm aware:
    PCL3 GUI is a raster-based language; I believe that the drivers basically generate encapsulated, compressed, PCL-format raster images of each page; the printer unencapsulates and uncompresses these, and then just prints the resultant dots. I suspect that the language does support a very limited set of PCL escape sequences, to select job-level characteristics (such as page size, orientation, plex mode, etc.), but doesn't support anything to do with text formatting.
    PCLm and PCLmS also appear to be raster-based, but in this case the raster images are encapsulated within a Portable Document Format (PDF) wrapper.

  • LaserJet Pro MFP M176n ePrint is not working

    I have problem with my printer. I cannot connect it to the ePrint service.
    The ePrint functions is turning on and off without my knowlegde.
    After enabling ePrint in web interface of the printer, printer does not printing information sheet.
    When I enter code for example my last code edy638epu59 (from email [email protected]) in HP Connected it either says invalid code or something with exception.
    I have updated firmware of the printer.
    I have added printer to DMZ on my router.
    I have changed the router to another.
    I have unlocked ports 
    UDP: 5353, 67, 547, 53, 5355, 137, 138, 139,427, 161, 514, 3702, 5357, 445, 3910
    TCP: 445, 80, 68, 8080, 443, 137, 138, 139, 427, 9100, 445, 515, 161, 9101, 9102, 9103, 9110, 9220, 9290, 9280, 9500
    UDP Port Range: 9999 to 65535
    I have tried to disable IPv6 in printer.
    I have tried to print information sheet on the front panel.
    I have tried every possible method found on the web and even I got my printer replaced - same issue...
    This question was solved.
    View Solution.

    Hello @ Averus89, 
    Welcome to the HP forum. 
    I understand you have done quite a lot to resolve your M176n and its connection to the ePrint service. 
    I would like to help you with this issue. 
    If the printer is not printing the web services info sheet, or allowing you to add it to HP Connected, I
    would set a manual DNS. 
    I wont go into great detail about setting this up. From your post, I feel you know your way around the printer and your network. If I am mistaken, let me know. I will go into detail. 
    The DNS to try is:
    Primary: 209.244.0.3
    Secondary: 209.244.0.4
    Set the DNS then try printing the web services info page again. 
    Let me know if this helps. 
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • Scan error 22 on HP Color LaserJet Pro MFP M176n

    I'm sorry, but I have a problem, and solution on this web-page didn't help me A 'Scanner Error 22' Message Displays on the Printer Control Panel.  Have you got any other solutions of this problem?
    Respectfully yours,Alexander.

    Hi @boostoman ,
    I see that you are experiencing issues with the printer getting a "Scanner 22" error. I would like to help you.
    Sorry for the inconvenience caused. Please follow this HP document on A 'Scanner Error 22' Message Displays on the Printer Control Panel. Make sure this printer is plugged into a direct wall, not a surge protector. If you haven't already tried it yet.
    Please keep the scanner lid open and then press the copy button.
    Check if the scanner bulb glows or moves.
    Also to see if the scanner moves freely across the glass.
    I will send you another step to try in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    If you're still receiving the same problem, it may be caused by Hardware, then please contact HP technical support for further assistance. Call 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printer HP Color LaserJet Pro MFP M176n

    El boton de encendio no funciona. Aprieto en el frontal y en el lateral. Acabo de desembalar la impresora.
    He probado a utilizar diferentes cables. Hay corriente en la toma.

    Hey @tomzab,
    Welcome to the English HP Consumer Forums!
    If you prefer to post your question in your preferred language,
    Spanish: Foro de usuarios de HP
    Alternatively, please feel free to post a revised message in English.
    Thank you, and have a great day!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Un able to install Scan to Email app on Color LaserJet Pro MFP M177fw

    Hello!
    I recently purchased  Color LaserJet Pro MFP M177fw as my home printer.
    Main thing i was looking for was Scan to Email feature.
    As I read in specifications provided in this product description I see:
    http://www.shopping.hp.com/shopping/pdf/cz165a.pdf
    Digital sending standard features: Scan to E-mail by HP SW; scan to application by HP SW ; scan to file by HP SW
    Once I try to install Scan to Email app i get following message once i try to install app:
    What is wrong, that i cannot install app that was one of main choice points of this printer.
    TWAIN and using computer scanning process is clear, so no need instructions how to scan using computer.
    I especially need fucntion that i scan document on printer, then enter email and its emailed.
    Thank You in advance for clarification,
    Martins

    Hi MrJansons,
    There are a numerous ways to scan and email from your printer. Please go through the below links.
    Make sure you have installed the software driver for your printer on your machine and then follow any of the methods to scan and email.
    http://support.hp.com/us-en/document/c03476857
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Laserjet pro MFP M176n keeps rebooting

    Hi,
    I have  a Color laserjet Pro MFP M176n printer. It ha snot been used for sometime.2 weeks ago when I printed something it had constant paper jam. I open the front door to remove the jam problem was not solved, I removed the ink cartridge to see if there was any piece of paper .Switch the apparatus off and  when i switch it on again it just wnt switch on and now it just keep rebooting and wont display anything. 
    I would liek to know how to solve this problem or if the printer has to be thrown out.
    Regards

    Hi @widadr,
    I see that you are experiencing issues with the printer constantly rebooting. I will certainly do my best to help you.
    Temporarily disconnect any cables from the printer, except the power cord, just to make sure there isn't any interference for the next few steps.
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Try and update the printer's firmware by a USB connection if the issue persists. Software and Drivers.
    I will send you another step to try in a private message.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet)
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Color Laserjet Pro MFP M277 will not install on Lenovo ThinkPad X1 Windows 7 64 bit

    I tried to install printer driver software for my completely new HP Color LaserJet Pro MFP on my Lenovo ThinkPad X1 laptop. Lenovo runs on Windows 7 64 bit. The installation failed during Installation preparation (77% complete). The process stopped saying an error occured without indication of the cause of the error. I have tried installion both from the CD following the printer product and downloading from the HP web, with the same result. I then then turned on my old computer, a Dell Precision M2400 with Windows XP. The installation went perfect without problems on this computer. Is there a bug in the SW for Windows 7 (64), or is some part of the printer SW sensitive to HW variaton between PC companies even if the OS is the same?

    I have the same problem with my Lenovo ThinkPad T420 running Windows 7 64 bit.  Tried absolutely everything I could find on the blogs and nothing worked.  To me, seems like a software problem (glaring, given the popularity of Lenovos and the Windows 7 64 bit systems).  Returning the printer tomorrow and will not buy another HP printer.

  • New color laserjet pro mfp m177 will not scan or copy

    Product is new. The problem is that this unit will not scan or copy.  I downloaded the latest drivers, but they would not install completely.  I also ran thru some trouble shooting guides on the HP website, but still it doesn't work.  It tries to make a copy, but it acts like it starts and then stops without completing the function.  It's almost like the scanner mechanism is stuck.  Anyone ever have this problem with a brand new printer?

    Hello , Thanks for posting in the HP Forums, and welcome! I understand you are unable to make a copy or scan on your new HP Color LaserJet Pro M177fw MFP. I'd like to help you with this. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers. If the issue persists, I would suggest download and installing the most recent firmware for your unit. You can download the firmware update utility here:HP Color LaserJet Pro MFP M177fw Firmware UpdateNote: You will need to connect the printer via USB to update the firmware, as any interruption during the firmware update can cause more issues. If this still does not resolve the issue, please let me know if you are getting some sort of error message on the screen or any blinking lights to indicate what the problem may be. Hope this helps!

  • Can't install Color Laserjet Pro MFP M177fw

    I'm having trouble installing the drivers for my new Color Laserjet Pro MFP M177fw AIO printer.  I'm using a Sony Vaio VPCX118LG running Windows 7. I initially successfully installed the software from the disk provided some weeks ago, and had the printer running satisfactorily.  About 3 weeks ago, I attempted unsuccessfully to install Office 2013 on the 32 system, and finally gave up trying and went back to Office 2010.  Since about that time, I've been unable to use either of my M177s (I have two printers in my two offices in different cities; the one in Sydnay is working fine with my HP Pavilion desktop up there, but now won't work with my laptop, as won't the other identical printer in Canberra). I've tried uninstalling the software (using the Uninstall utility on the disk provided with the printer) and reinstalling.  The install process seems to be proceeding normally but at about 99% complete stops with a message about a "Fatal Error".  When monitoring the process using the Windows dialogue, the failure appears to coincide withthe installation of the last driver (after the Scan, Fax, USB Printer, etc...the one called, "HP Color Laserjet Pro MFP m177fw"). I've tried downloading the installation files and drivers from the HP website and installing from the disk provided, but neither method works. Can someone there offer any help, please? Claude

    Hi ,  I think it's time to take the proverbial gloves off.  I suggest you try a selective start up on your PC working directly with MSCONFIG to try and determine what, if any Windows service or program is interfering with your ability to install the drivers.  Here's how:   Click on the Start menuIn the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Selective Startup' and uncheck Load Startup ItemsClick the Services tab. Check the box at the bottom for Hide All Microsoft ServicesSelect Disable AllSelect Apply and OKRestart your computer when promptedAfter you reboot, try the install again.  If you're able to finish the setup we can safely assume there is a background program or service on your computer blocking the install. You will need to enable one service at a time on your computer to locate the program that's blocking your printer from printing.   Here's how to undo the above-noted MSCONFIG steps:  Click the Start icon.In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboardWhen the System Configuration Window opens click 'Normal Startup'Click Apply and OKRestart your computer as prompted.  If this approach falls short I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
    Once you fill out the online form to create your case you can choose from different direct contact methods. Best of luck, 

  • HP Color LaserJet Pro MFP M177fw Not working with Fedora 14

    Our ERP is compactible up to Fedora 14. But I newly purchased Printer(
    HP Color LaserJet Pro MFP M177fw) is not working with this OS.
    Give me a urgent solution

    Hi @HealthITLadyRed,
    I read your post and see that the printer is making noise and is stuck initializing. I would really like to be able to help you resolve this issue.
    I have provided some steps to try to see if we can resolve this issue.
    Check and remove any packaging material inside the printer and toner.
    Disconnect the USB/Network/FAX and power the printer on Standalone.
    Do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord.
    Update the printer's firmware by a USB connection. Software and Drivers.
    Select Option 2 and wait for the page to load and then select the link for firmware. This resolved the previous posters issue.
    I can send a private message with another step to try.
    In the forum beside your handle name just click on the envelope to view it.
    How is the printer connected? (USB/Ethernet/Wireless)
    What happened prior to this issue? (paper jam, changed toner) Any feedback would be appreciated.
    Is this a new printer?
    If you appreciate my efforts, please click the Thumbs up button below.
    If there is anything else I can help you with, just let me know. Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw. It displays "No AirPrint Printers Found'.

    My iPhone 6 iOS 8.2 does not print on HP Color LaserJet Pro MFP M476nw.
    It displays "No AirPrint Printers Found."
    Same thing for iPhone 5S iOS 8.2.
    Both iPhone and printer on the same wifi network.
    I tried printing from different applications. AirPrint does not work.
    I tried turning off and back on, reset, printing from different applications, ...
    iPhone 6 prints through HP Wireless Direct printing.
    Sony laptop works via wifi.

    Hi mtotonji,
    Thank you for using the Apple Support Community. Given the nature of the issues you are describing and your current configuration, you may be better served by reaching out to one of Apple's other available resources for more direct assistance - https://getsupport.apple.com/GetproductgroupList.action
    Sincerely,
    - Brenden

  • HP Color LaserJet Pro MFP M177 Series Fax sends but won't receive faxes

    I can send faxes using HP Color LaserJet Pro MFP M177 Series Fax but I cannot receive them. I have faxed test pages and the setup is correct. Any suggestions?

    Hello DBrad8,
    Welcome to the HP Forums!
    I understand you're unable to receive a fax using the Laserjet MFP M177. I will do my best to assist you! First, I need to find out what type of added features do you have on your fax line? Please post these information on this thread.
    Do you have an answer machine on this line? If so, how many rings to answer is this set to?
    Do you have an Internet Service on this line?
    Please follow this entire HP document on Cannot Send or Receive Faxes. Run a fax test page and let me know if everything passed or if anything failed. I will be looking forward to hearing from you. Have a great day!
    I worked on behalf of HP.

  • Hp color laserjet pro mfp m177fw (Cant open SCANNER on computer)

    Hi there,
    I am using a desktop 27 inch Mac with OS X Yosemite 10.10.1
    When I go to system preferences and click on printers/scanners I can see my mfp m177fw laserjet printer (wirelessly connected fine). But unlike on my Macbook Pro laptop on my desktop there is no SCANNER option to open up?  Thus I am unable to scan from the printer to this desktop. I have the latest HP driver installed on the desktop computer for my m177fw printer.
    Any ideas? Any help would be greatly appreciated
    thanks!
    Simon

    Hello @Simonjayh,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the scan issue that you're experiencing since installing your HP Color LaserJet Pro MFP M177fw on your Mac OS X 10.10 computer. Can I please have you run through the steps below to get this product functioning properly again for you.
    Step 1: Uninstall Drivers:
    First, can I please have you click here and run through the steps provided to Reset the Print System on your Mac OS X 10.10 computer. Please refer to the section under 'Resetting the printing system in OS X Lion' as the steps are the same for your Mac OS X 10.10 Operating System. Resetting the Print System will remove every printer from your Print & Scan window on your computer. However, this does not uninstall the devices. Therefore, should you use other printers on your Mac OS X 10.10 computer simply ensure that they are plugged in with a USB Cable or Network connected and add (+) them back in. Do not add your HP Laserjet printer back in at this time.
    Next, please click here to access the steps on how to properly uninstall the Software and Driver Package for your printer. Once the website opens select the dropdown for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for your Mac OS X 10.10 Operating System. Once the uninstall has completed successfully, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Lastly, please click here to download the appropriate Mac OS X 10.10 Full Feature Software and Driver package for you printer. Once the website opens select the Download button on the top left. Once the Download is complete please follow the onscreen steps to reinstall you printer.
    Once your printer has been successfully reinstalled, please test the HP Scan functions again. For additional scan information, you may want to refer to : Scanning with the Full Feature HP Software in OS X v10.10 Yosemite
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Maybe you are looking for