Color Lasertjet 3600 N Disc install error message about IE5 or later. Have IE9.
Trying to set up and connect to wireless printer (HP Color Laserjet 3600N) in small office. During install got an error message saying I needed Internet Explorer 5 or later. I have IE9 so I'm not sure what the issue is.
Download from the HP web site the full feature software and drivers. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!
Similar Messages
-
ITunes 10.2.2 won't install - Error message about Windows Installer package
I ran a prompted update on iTunes for 10.2.2 for Windows Vista, and it completely wrecked itself. iTunes would no longer open, and it said that the shortcuts no longer existed.
I have tried uninstalling iTunes and all traces of it, and re-installing it, but keep getting an error msg that says "Problem with this Windows Installer package. A program required could not be run." I even tried a previous version of iTunes (10.1) and got the same error.
Can anyone help with this?I had the same problem with updating my itunes. I spent hours trying to figure out how to fix it
After updating my windows 7 and fixing all the "corrupt" files, what seems to finally work for me was this
Go to add or remove programs in the control panel, on Windows 7, just go to start, control panel, and then uninstall a program. Find Apple Software Update on the list, and click on repair. Once that is done, try to download iTunes again and it should work. -
Coolorus won't install, error message about photoshop version 11-14 Help?
I bought Coolorus colour picker yesterday to use with Photoshop CS6 but the extension manager keeps saying "this extension cannot be installed, it requires photoshop version in range of inclusively 11 and 14." Is the colour picker not compatible with newer versions or can it be installed differently?
I'm running a Dell Inspiron 15r special edition with an i7 and 16gb ram. The version of photoshop is apparently 13 and the manager is 7.0.0.374
Any help would be great
ThanksYou have to use Extension Manager CS6 to install this extension for Photoshop CS6.
-
When I go to burn a CD I have it in a playlist and hit burn to disc a error message comes up and says disc burner or software not found. How do I fix this for Windows vista.
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Gateway M-2626U
iTunes 10.2.2.14
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DAE0803978170
Current user is not an administrator.
The current local date and time is 2011-06-07 21:32:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 3200 Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.2.2.14 (x64) is currently running.
iTunesHelper 10.2.2.14 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly. -
am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?
Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support -
Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.
Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated. -
Itunes install error message - program not found ...x64/difxinst64.exe
itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly. -
Installed Yosemite on my Mac. CS5 no longer workers. When I try to open Photoshop, I get an error message about needing a Java SE 6. This is different from the other Java update Yosemite required (I already installed that). I assumed the higher update would suffice for previous versions, but I guess it doesn't work that way. Went over to the Java site, but SE 6 doesn't seem to have a MAC version. How can I resolve this?
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium -
when i try to open itunes i now get an error message saying i do not have the required components installed error number 45075?
Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
After installing Version 5 I get an error message about incompatibility and min and max versions.
I shutdown Zone Alarm, and deleted the contents of the file, which contained the "exe" file, then reinstalled Firefox version 5.0. I still get the XUL Runner error message about incompatibility of Version 5.0 with min and max 5.0.1. What next?
The updater wasn't able to update all the files and some were left as older versions.<br />
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup -
How do I fix an install error message 0x8007054f
How do I fix an install error message 0x8007054f
https://discussions.apple.com/thread/3029902?start=0&tstart=0
old link may be broken new one right here
http://support.microsoft.com/kb/946414
Just wanted to make sure you understand that if you do have question, there are the odds someone already answered it, and it wasn't me. -
I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?
Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7 -
great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!
The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Hi
i want to install an mail Id on Ipad Mini other than yahoo an google but it is showing an error message about SSL could not connect. Please give me the solution on this.Hello there ypda75,
I have an article here that has a list of settings to get from your Email provider so you can make sure that the settings are correct. It has troubleshooting steps to try as well. Also I would recommend restarting the router, and/or testing a differnet network.
iOS: Unable to send or receive email
http://support.apple.com/kb/ts3899.
If you are unable to send or receive email, try the following steps:
Restart the iOS device.
Tap Safari and attempt to load a webpage to ensure that the device has Internet access. If you're unable to load a webpage, try the Wi-Fi assistant.
Try an alternative Internet connection.
If your email is provided by your Internet provider, try connecting from the home network.
If your iOS device has an active cellular data plan, try to disable Wi-Fi: Tap Settings > Wi-Fi and turn off Wi-Fi.
If not, try a different Wi-Fi network.
Log in to your email provider's website to ensure that the account is active and the password is correct.
Delete the account from Settings > Mail, Contacts, Calendars and then add the email account again on the iOS device.
If you're still unable to send or receive email, contact your email provider and verify the account settings are correct. You will need to gather this information (PDF).
All the very best,
Sterling -
I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".
Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,
Maybe you are looking for
-
How can I display a SP 2010 out of the box workflow's task assignees via powershell?
There are days where one of the 250+ workflows at the site has attempted to send email to someone no longer at the company. I would like to find a way to go through the farm and display all the list URLs that have workflows, and the mail addresses as
-
E72- Unable to send e-mail from work mailbox
I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have
-
How can I open multiple gmail accounts on the same Firefox broweser?
I use Firefox. I have multiple gmail accounts. I would like to access them simultaneously.
-
I just upgraded from Logic pro 9 to Logic Pro X on my computer, but all my EXS24 libraries are missing all of a sudden. How do i Get them back??? I have checked both the resource folders, and made backups from Logic pro 9, but its not recognizing th
-
Transfer data from the JSP to other sites
I want to transfer the data from a jsp to a external site. where the data required for the user name and password in the site are available in the JSP. (Here the external site is not under our control.........) From this JSP data should be able to tr