Color management issue: What am I doing wrong?

Ok, the problem is pretty simple to explain;
In Bridge CS5's "Creative Suite Color Settings..." I select "Europe Prepress 3" and hit apply.
No problems thus far, it does set the same setting across InDesign, Photoshop and Illustrator.
Looking at the color settings in Photoshop, it says "Preserve Embedded" for CMYK sources, which is correct. Checking in InDesign however, the same setting (CMYK profile handling) is set to "Preserve Numbers". No matter what I do, this problem persists. I can of course manually set it to "Preserved Embedded Profiles", but that kind of defeats the purpose of using Bridge for syncing the color settings if it can't be trusted.
Am I doing something wrong here, or have I encountered a bug in InDesign or Bridge or what?

Similar Messages

More XP/SATA install issues: What am I doing wrong?

Dear all,
Before I begin, I want to say that I've read and re-read the RAID setup FAQ several times. Please don't tell me simply to read the FAQ.
This is my setup:
K8N Neo Plat
A64 3200 1MB L2 CG Rev.
512MB PC4000 Ballistix
R9800 Pro
2 x 80GB SATA Seagate Barracuda
530W Fortron PSU
This is my second K8N Neo Plat. I had the following same issue with the first one. The above setup is all I have connected when I try to install XP Pro SP1.
I first went into BIOS, enabled all appropriate SATA/RAID options (using ports 3/4), exited, setup my RAID O, exited, and went back and set HD Priority to the RAID in BIOS.
That said, I loaded from XP CD, did F6, loaded everything off the floppy, but at the end of the load screen, instead of "Starting Windows", I get:
"Setup either detected multiple disks in your machine that are indistinguishable or detected raw disks. Setup has corrected the problem but a reboot is required.
"Setup cannot continue, press any key to restart"
So, I figure okay, it could be a fluke, so I go back through and load XP again, and this time I get past the blue load screen and am able to setup partition, format, and copy files.
Upon Reboot, I hit F11 to make sure my RAID will boot. When it does, however, I get this error instead of the normal XP Setup:
"Windows could not load because of a computer disk hardware configuration problem. Could not read from selected boot disk. Check boot path and disk hardware."
This is where system hangs. Why is this all happening? I have followed the FAQ word for word, but the stupid thing just will not load from my RAID.
Frustrated. Please help
Odie

Hi Odie 812,
I'm no expert on this either, but I have gotten mine working, and there a number of steps I would consider relevant. It sounds like you've done the first 4 steps perfectly, and so this may be "teaching my grandmother to suck eggs". You should probably just jump straight to the drivers issue in (5).
However, I'm going to spell out all the steps for clarity for other users. I would re-check all stages up to 5 anyway, just to be sure.
1) Check and double check that the settings in BIOS are correct. That is, you need to set your RAID and SATA array up under "Integrated Peripherals" in at least 3 places:
a) Under "onboard device" the relevant SATA interfaces need to be enabled (either or both SATA 1/2 or SATA 3/4).
b) Under RAID Config, you need to set RAID as "enabled"
c) Under RAID Config, you then need to specifically enable the 2 or more SATA interfaces you are going to use for your array.
2) Make sure that after you have restarted that neither of the 2 drives now appear in the initial "detecting devices" screen. After this has passes, the NVIDIA RAID config setup should appear instead, allowing you to press F10 and enter setup.
3) set up the array, and make sure it is recognised as "good".
4) Go back into BIOS and ensure the array is recognised and is the first item in the boot list.
[This appears to be exactly what you did to date. If so, all well and good.]
5) Set up Windows using the appropriate drivers.
Here's where the problem is likely to lie. I never got a floppy disk with the Mobo and tried to install first using the drivers that came on my CD. These did NOT work, and Windows just saw 2 unpartitioned HDDs, which it did not want to install to (similar to your comment below).
So, what drivers should you use? Well, I extracted the IDE drivers from the 4.24 NVidia drivers package (you can extract directly using Winzip) and ensure that all the drivers in the IDE/WinXP directory are copied to a floppy (or CD) for booting at F6 in Windows setup.
However, I have recently found out that the IDE drivers in the MSI 5.03 package appear to be later ones than in the NVidia package. Som my current inclination would be to use these.
I hope this helps,
David

What am I doing wrong with this filter (counter/frequency issue), probably another newb question.

I extracted the part of my VI that applies here. I have a 6602 DAQ board reading a counter for frequency, using a Cherry Corp proximity sensor. Getting a lot of noise and errant ridiculously high readings. Speed of shaft which it's measuring is currently 2400rpm with one pulse per revolution so 40hz.
Trying to use the express filter VI to clean up the signal and ignore anything over, say, 45hz and under 35hz. No matter what setting I choose I continually get the 20020 error, Analysis: The cut-off frequency, fc, must meet: 0 <= fc <= fs/2. I know this relates to sample period somehow, but for the life of me I can't understand what I'm doing wrong.
I used this VI without filtering on bench tests with a hand-drill and got perfect output every time. Now it's on the machine and being erratic. Any help here will ease my stress level significantly, thanks.
VI attached
Still confused after 8 years.
Attachments:
RPM.vi ‏92 KB

Hello Ralph,
I'm not sure about mounting your sensor to your rig, but I can provide a couple ideas about the filtering. Depending on the type of noise, the digital filters on the PCI-6602 could help eliminate the behavior you are seeing. If the noise manifests as a "glitches" or a bouncing signal, you could use another counter with a minimum period to help eliminate the noise. This concept is discussed in greater detail in this KnowledgeBase. I noticed that you are using NI-DAQmx; the practical application of the digital filters on the PCI-6602 in NI-DAQmx is discussed in this KnowledgeBase. A more detailed description of the behavior of these filters is provided in the NI-DAQmx Help (Start>>All Programs>>National Instruments>>NI-DAQ) in the book entitled "Digital Filtering Considerations for TIO-Based Devices".
I also wanted to comment on your original post and explain why you were receiving error -20020. For convenience, I have copied the text of the error code below.
Error -20020 occurred at an unidentified location
Possible reason(s):
Analysis: The cut-off frequency, fc, must meet: 0 <= fc <= fs/2.
I think you may have misunderstood exactly what the Filter express VI does. The Filter express VI takes a series of values in a waveform and performs filtering on those signals. So, it will look at a waveform made up of X and Y values and apply the defined filter to this waveform. Specifically in your application, the cut-off frequency (fc) is the Upper Cut-Off level that you specified in the Filter express VI; any frequency components of the waveform outside of the range you have defined will be filtered. The fs is the sample rate based on the data that you wire to the Signal input of the Filter express VI. In your VI, this data is coming from the DAQ Assistant. So, fs will be the sample rate of the DAQ Assistant and is associated with the rate at which points are acquired. The sample rate does NOT relate to the bandwidth of the signal, except that the Nyquist theorem tells us that the sample rate must be at least twice the signal bandwidth in order to determine periodicity of the signal. So, in this case, the sample rate of the DAQ Assistant would need to be at least double the high cut-off frequency.
However, you are performing a frequency measurement using a counter. I think this is where the confusion comes in. For the frequency measurement using a counter, the DAQ Assistant returns a decimal value which represents the rate of the pulse train being measured by the counter. It does not return the actual waveform that is being read by the counter. It is this waveform that would be band-pass filtered to eliminate frequency content outside of the filter's bandwidth. Instead of the Filter express VI, I would recommend that you simply discard values that are outside the range you specify. I have modified the code you posted earlier to perform this operation. The image below shows the changes that I made; rather than using the Filter express VI, I simply compare the frequency to the "Low Threshold" and "High Threshold". I use a Case structure to display the value on if it is within the limits. Otherwise, I display a "NaN" value. I have also attached the modified VI to this post.
Message Edited by Matt A on 09-04-2007 07:58 PM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
RPM (Modified).JPG ‏17 KB
RPM (modified).vi ‏72 KB

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I must have a setting wrong on PSE 10. When I use selection tool and select color, it is always blue. What am I doing wrong?

I must have a setting wrong on PSE 10. When I want to fill a selection with color, I choose the color but it always comes up blue. What am I doing wrong?

What IP address does the TC have and what IP does the computer have?
We need more info as we really have no idea what your network looks like.
Modem router, model, type of broadband?
TC setup as bridge or router?
Is the computer getting internet via the TC?
Are you using wireless or ethernet?
Have you set IPv6 correctly to local link in the computer on whichever network client is doing the connection?
Did this work the first time for backup and has now failed? If so simply reboot the TC. It is a constant bug that the TC is lost to the network.

When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

Good day!
What is "place" supposed to mean – open, place as Smart Object, …?
What are the image’s Color Mode and bit depth?
Could you please post a screenshot with the pertinent Panels visible?
Does Window > Adjustments not raise the Adjustments Panel?
Regards,
Pfaffenbichler

What am I doing wrong - size issue

Need some advice...as usual!
I designed a site on my 17" monitor and set the margins to 0
and table to 100%. However when I look at it on different screens
it looks rubbish...big gap at the bottom of the page with the
design cramp at the top. I wonder if someone would mind looking at
my code and see what's wrong with it. The site was designed using
various techniques including css for nav bars, tables, and
fireworks elements. the site can be viewed at:
www.shelleyhadler.co.uk/nerja.html
thanks for your help. Shell

>Re: What ams I doing wrong - size issue.
Several things...
First, your 17" monitor has noting to do with web page
layout. What
resolution is your monitor set to? it could be 800 pixels
wide or 1280
pixels... wouldn't that make a difference? That aside, screen
resolution and
size are irrelevant anyway. What counts it eh size that your
viewers have
their web browser window set at.
I have a pretty large monitor, set to a very high resolution,
so I open
several windows at once and size them so I can see the
content in all.
Sometimes my browser is full screen and sometimes its shrunk
down to less
than 600 x 800. Your web site needs to accommodate that.
Every web viewer
out there is different and likes the way they have their
screens set up. So
you need to be flexible and your site needs to be flexible.
Next, Don't design in Fireworks and import to Dreamweaver.
Fireworks is a
superb web ready graphics and imaging processing program. The
authors
(mistakenly) threw in some web authoring stuff that works
very poorly.
Design your pages using Dreamweaver. Learn html markup and
css styling to
arrange it, then use Fireworks to create graphics to support
your content.
Along the way, be aware of the diffferant browsers in use.
Internet
Explorer is the most popular (or at least most in use) simply
by virtue of
the Microsoft market share, but it is also the least web
complient (by virue
of the Microsoft arrogance) so some things that work there,
(like your green
bands) won't on other browsers and vice versa.
That said... graphically, your site looks great. You have a
good eye for
composition and simple clean design. You just need to learn
to use html to
your best advantage to create some realy nice looking and
nicely working
sites.
"shelleyfish" <[email protected]> wrote in
message
news:[email protected]...
> Need some advice...as usual!
>
> I designed a site on my 17" monitor and set the margins
to 0 and table to
> 100%. However when I look at it on different screens it
looks
> rubbish...big
> gap at the bottom of the page with the design cramp at
the top. I wonder
> if
> someone would mind looking at my code and see what's
wrong with it. The
> site
> was designed using various techniques including css for
nav bars, tables,
> and
> fireworks elements. the site can be viewed at:
>
> www.shelleyhadler.co.uk/nerja.html
>
> thanks for your help. Shell
>

When I add a photo filter to an image, I can't use the color sampler in the photo filter dialog box. It automatically selects white. What am I doing wrong?

Whenever I add a photo filter to an image, I can't use the sampler tool that automatically appears when you open the photo filter dialog box to manually select the color of your filter. Whenever I try to use it, it automatically selects white (#ffffff), no matter where I click in the image. Does anyone know what I'm doing wrong?
Thanks

When you add an adjustment layer, the layer mask is automatically active. You need to activate the pixel (image) layer by clicking on it in the Layers panel.

I used to be able to see and manage my phone's contents on my computer. That was my iphone 4. Now I have an iphone 5c and all I can do is pull up iTunes. What am I doing wrong?

I used to be able to see and manage my phone's contents on my computer. That was my iphone 4. Now I have an iphone 5c and all I can do is pull up iTunes. What am I doing wrong?

See if this thread helps: https://discussions.apple.com/message/23658130#23658130

I have Lion and Safari 5.7.1 and my privacy tab in preferences has no options. I'd like to manage cookies. What am I doing wrong?

I have Lion and Safari 5.7.1 and would like to manage cookies. My privacy tab in preferences has no options. What am I doing wrong?
Thanks

Uninstall SIMBL as follows.
Select Go ▹ Go to Folder… from the Finder menu bar, then enter the following text in the box that opens:
/Library
A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.
Application Support/SIMBL
InputManagers/SIMBL.bundle
LaunchAgents/net.culater.SIMBL.Agent.plist
ScriptingAdditions/SIMBL.osax
Log out and log back in.
Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

its ok now...

I have Firefox 5.0 installed on my desktop and everytime i try to download or save a file the Firefox Download Manager won't open. Why? What am i doing wrong?

I am running Windows Vista on my desktop. I also have Firefox 5.0 downloaded on my pc.
Whenever i try to download a software update or any type of file the Firefox Download box doesn't activate anymore like it once did.
Why? What am i doing wrong?

'''''Options > General''''', be sure "Show the downloads window when downloading a file" is selected. See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel Options window - General panel]<br />
To remember download history in the download window, '''''Options > Privacy''''', "Remember download history" must be selected. See [https://support.mozilla.com/en-US/kb/Options%20window%20-%20Privacy%20panel Options window - Privacy panel]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong, never had this problem

I am trying to save a photoshop CS6 psd file to jpg and get an option jpg, jpg2000 or jpg stereo, I choose jpg and then Mac 256 colours, normal or interlaced. I just want regular jpg with a high resolution. What am I doing wrong? , never had this problem before. Help!!!

Your description of the issue is not clear:
What format, bit depth and color was your original file "from the net"? It sounds like it was a Color Indexed GIF, which would cause what you are describing.
In the Macintosh Finder, select said "net image" and do a Get Info on it (Command+i). When the Info box appears in the Finder, take a screen shot and upload it here by using the little camera icon in the Reply Editor in the forum's web interface.
If the image is a 256-color GIF, remember the rule: GIGO = garbage in, garbage out.

HT2486 birthday are not saving in my contacts? What am I doing wrong. I always have put in birthday before with no problems

Birthday are not saving in some of my contacts? What am I doing wrong. I always have put in birthday before with no problems. Some contacts it works and others do not? help me.

Arnis and Jeff,
Thank you both very much for your assistance. I was able to figure out why the Adobe Application Manager kept failing on installing the patches. Idiot me didn't unzip them first. Once I unzipped the patch files, the installer worked fine. Both patches are now successfully installed; my FM version is now 12.0.2..
To answer some of your questions:
Yes, I have administrator privileges on my PC.
Yes, I had all of the files in the book opened when I generated and/or updated the LOR file. So that was not the issue.
With the patches installed, I opened a book and all of its files. I updated the LOR and all works fine – it gives me all of the Imported Graphic references. So there must have been an issue with that release of FM12 (12.0.0.329), which was fixed with the patches.
Again, thank you both for your help!
Best regards,
Beverly

Color management issue: What am I doing wrong?

Similar Messages

Maybe you are looking for