Color managment - CS4 doesnt seem to be using the calibrated profile

This problem has been plaguing me since setting up a dual screen.
My main screen is a dell 2410. I have calibrated it with an eye1.
My test prints from 2 seperate pro labs arent the same as what I see on my screen from inside PS. BUT are perfect to how the image appears when viewed in windows. If I soft proof within PS to 'monitor RGB', it is perfect to the print (which is redder than how it is appearing in PS)
It is as if PS isnt using the right profile.
I've double checked that my main monitor is set to the calibrated profile as default in windows color management for Win7
The colour setting in PS are set to Nth american general purpose....but when I fiddle around with comparing it to the soft proofing profiles it goes back to 'custom'
I'd appreciate any thoughts
Rowena

I installed Toshiba bluetooth Stack 8.00.03 as non-TOSHIBA USB Bluetooth adapters. I paired "AND UA-767PBT-C" which is Continua compliant Blood Pressure monitor with Bluetooth manager in netbook and the device is listed as one of the connection in Bluetooth settings. But in Toshiba bluetooth settings windows, the AND device is appearing with status as "Not Connected". When I try to connect, I get message as "Connect from health care ready application.". I went to "options" - "other" - "Health Device Settings" and checked "Displays a message when data is received from the Healthcare Device".
When I get the readings from Blood Pressure monitor, no data comes on the computer's system tray or Toshiba bluetooth application. What should I do so that I can view the readings from blood pressure monitor onto the computer? In the manual it is mentioned that Toshiba bluetooth stack will display the readings on the computer.
Do we have to use any APIs to get the readings out of Toshiba's bluetooth stack?.
Any help is appreciated.

Similar Messages

  • I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

    I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

  • Color artifacts with A7s and A6000 files using Camera calibration profiles

    I'm seeing some really obvious chroma artifacts / false colors with RAW files from either a Sony A7s or A6000 when using any of the Adobe-provided Camera calibration profiles that emulate Sony's rendering.
    This seems to happen at any ISO, and is very frequent.
    If I use the Adobe Standard calibration profile then things look normal, but that's might just be because it produces rather desaturated images compared to the "sony" profiles.
    Prior to those Sony cameras I was using Nikon DSLRs for which I had somewhat similar issues when using the first version of the Nikon camera profiles.
    Those issues got fixed when Adobe released the "v4" camera profiles.
    Below are some examples without any adjustment, the only difference is the choice of camera calibration profile:
    Camera Landscape:
    Adobe Standard:
    Camera Standard:
    Adobe Standard:
    Camera Landscape:
    Adobe Standard:

    The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
    While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
    The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

  • HELP !  why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !

    HELP !  why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !
    what am i missing ??!!

    Please add you system info and SpeedGrade version and build number if you actually want help.

  • Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Welcome to the Apple Community.
    Are you also trying to re-open it on the same device as you edited it.

  • Hone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

    ive got the iphone 5s 4 weeks ago.today the screen turned blue and the phone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?

    Hi vanessato,
    Thanks for visiting Apple Support Communities.
    I recommend these troubleshooting steps if your iPhone does not turn on.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • Lightroom not using the Monitor Profile

    I have recently set up a new computer with a new monitor. When I got PS and Lightroom set up on the new system I noticed that when viewing photos in both applications the colors are VERY different compared to how they look viewed online or in another photo viewer from my desktop (windows 8). I also noticed that when I opened PS I got a message saying that the Monitor Profile is "bad" and I could opt out to ignore the profile. When I did ignore it the color looks fine. Blacks are black, gray's are gray, etc . . . Anyway, I am wondering if there is a way I can have Lightroom ignore the profile as well. I have a monitor calibrator and I will try that, but I am wondering if it will do anything only because other applications look fine. Hope someone can shed some light on this!

    First of all, Photoshop and Lightroom are fully color managed applications that will actually use the monitor profile to display the image.Many other applications (viewers/browsers) are not and will just ignore it. So there's a difference right there.
    That said, when you get that message in Photoshop, it means exactly what it says. That profile is bad and should not be used.
    The real solution is to use a calibrator to make a new custom profile for your monitor. Until you get that up and running, use sRGB IEC61966-22.1 as monitor profile. You set this up in Control Panel > Color Management > Devices:

  • Follow up task without using the action profile

    Hi,
    Is it possible to create the follow up task without using the action profile? If so, please let me know how we can do that?
    as per the requirements, i have to the custom coding that will automatically create follow-on task triggered by status change on the all the transaction type. Please guide me how can we do that.
    Task details (task id, description), I'm reading it from the custom table.
    Thanks for your help.
    Regards,
    Vaibhav

    Thanks Naresh for the response.
    Not sure if I can use the CRMV_EVENT. Even I'm not aware how to use that. Let me tell what i am doing in the logic.
    - implementing the logic in the badi order_save (method - CHECK_BEFORE_SAVE)
    - get the header and item details using the FM CRM_ORDER_READ.
    - get the status of header / item from the output of CRM_ORDER_READ.
    - compare the status with the custom table (having info of hearder type, item type, status, tast id, task description etc)
    - if status is different, create the task using the details from the custom table.
    now i want to write the logic to implement the last step. Do we have any standard FM where I can pass the task ID and it will create the task? Please help.

  • How do I use the same profile for two users on the same computer

    I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

    Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • How to use the selection profile and status profile for production order?

    Hi expert,
       I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
      Please help me.
      thanks in advance.
      george.shi

    Hi George,
    There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
    We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
    In this status profile,
    1.We define the sequence in which user statuses can be activated,
    2.We define initial statuses
    3. Allow or prohibit certain business transactions.
    Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
    Regards,
    Raja.
    Edited by: Rajarao on Oct 30, 2008 6:21 AM
    Edited by: Rajarao on Oct 30, 2008 6:22 AM

  • Using the Same Profile for Outlook Connector and Exchange

    Is anyone using the same profile in Outlook for both the Oracle Connector for Outlook and Exchange server? Only Exchange would have an IMAP mail service defined.
    Oracle tech support kindly provided me with the following information but I would really appreciate hearing about customer experiences:
    "In theory this should work without causing any problem if only one service within the same Profile is configured for mail. However, before configuring a large amount of users with such a configuration, please start with 1 user and perform some tests, as I am not aware of anyone using such a configuration. The fact that you want your Oracle calendar users to invite Exchange users, will be like inviting External users, the Free/Busy information for these users will not be available etc. Also inviting external user is an already existing feature of the Oracle Calendar."
    Thanks very much.
    Brenda

    We are doing it currently as we are switching over from Exchange 5.5 to OCS. We set up a profile using the Oracle connector and then go into properties and add the Exchange account. We used this method to move files from the Exchange server to the Oracle server by having both profiles running.

  • How to run 2 different Firefox versions using the same profile

    Is it possible to run 2 different Firefox versions using the same profile and still have browsing history saved? I used to be able to do that up until a week ago. What happened was I was using Firefox version 3.6.28(a very old version of Firefox) which I need to use sometimes and then the current version, 36.01. Earlier I would use both my versions of Firefox and the history would be saved if I used both versions but now when version 36.01 came out, its not saving for some reason. Is this a bug? The history is saving during the current session, but say I close out of Firefox and then go back to Firefox, it will still be saved but when I go to my old version of Firefox, the history is saved but then after I close out of that the history on my new current version is all gone and it starts me all fresh, is there a way to get rid of this so that the history will always be saved even if i switch between versions? I could do that before up until Firefox 35.01 but Firefox 36 isnt saving the history from the old version, is this a bug or not? Now I have to create a separate profile for each Firefox so the history I use on the old version is only saved on that version and the history I have on the new Firefox is another profile so that history from the 2nd profile remains but I dont want that. I want to be able to use the same profile so that the same browsing history can be saved using both versions like it was before, I hope people can understand my problem. If not I can further explain, thanks.

    @ the-edmeister, I understand that the 2 versions are completely different, however how come the history was saving fine when I switched between firefox 3.6.28 to the current one which was Firefox 32, 33, 34, 35 etc? Like I'm surprised how come now at Firefox 36 this problem started, Firefox 36 isnt that much different from Firefox 35 but yet Firefox 35 was still saving my browser history from the old 3.6.28 version, my 3.6.28 version never upgrades but the new Firefox keeps upgrading whenever there is a new release out automatically and then all of a sudden when the new version of 36.01 came out all my history was gone, so isnt Firefox 35.01 also very much different from 3.6.28 as much as 36.01 is? I hope you got what I meant, thank you for helping.

  • Print with no color management CS4 + Snow Leopard broken

    I have seen comments in this forum about problems with printing with CS4, but wasn't sure that they were going to apply to me. They do, big time.
    I print to an Epson 9800, I convert the image to the Epson profile for that paper, and then print using no color management. With CS4 + Mac OS 10.6 the colors are completely off, and the results unusable, and I could not resolve it by printing from CS3 instead. I finally ended up installing 10.5 on a new partition, deactivating CS3 on the 10.6 partition and installing on the 10.5 partition (because Adobe's licensing treats the same program running on the same computer with different boot partitions as two different "installations"!), and then actually going back one generation in the drivers for the printer. Basically this resurrects my computer as it was in 2007, and I can now print flawlessly. I'm not sure whether the latest printer drivers introduce problems or not, and got tired printing test images.
    Of course, this means that I edit the photo in 10.6 + CS4, then reboot to 10.5, print in CS3, then reboot back into 10.6. And of course I can't use CS4 while printing from CS3. Very frustrating.
    My questions are: (1) is there an Adobe document that discusses this problem, (2) are Adobe aware of this problem, and (3) are there any other work-arounds that people know of other than reverting to CS3 + OS 10.5?
    A

    Thanks Chris,
    I didn't try older Epson drivers + 10.6. I wasn't quite sure if I was getting the exact same colors with the newest Epson drivers + 10.5, so I reverted to the previous version drivers + 10.5 and am able to print perfectly with that.
    I must say that Adobe's licensing really gets in the way when there are problems like this. I only updated to 10.6 (yes, perhaps a little prematurely) after reading Adobe's reports on compatibility and searching these forums for any news of problems. But now that I have updated to 10.6, I really don't want to go back to 10.5 permanently. And, as I said, you can't run the same version of Photoshop on the same computer on two different boot systems, without using up the two licenses. This is very frustrating, and violates my understanding of the license that Adobe gives its users: the ability to run the software on either of 2 computers, as long as you don't run on both at the same time.
    I hope you figure this out, let us know as soon as you can.
    A

  • Adobe Media Encoder CS4 doesnt allow me to set the bitrate?

    I have a Video file that I need to encode to several f4v
    files at different bit-rates, but it seems I cannot change the
    bit-rate in Adobe Media Encoder CS4?
    I used the previous version to encode, but I cannot encode to
    f4v, only flv.
    Is there something I am missing here?

    Sorry, found it,
    Didn't realise I could scroll down to find more options in
    the Encoder Window

  • Managed Property in Refinement - why not use the automatically-created site column managed property

    Hi,
    I read that although SharePoint 2013 automatically creates managed property for site column (OWS_Q_TEXT_COLUMNNAME) - in the refinement i should use a managed property and map to the ows_columnname. why?
    what's the difefrence?
    what is best - to create a new managed property (and set it as refinable) or use the OOB Refinementstring0, Refinementstring1 etc.)?
    keren tsur

    You are probably talking about this blog post.
    http://blogs.technet.com/b/tothesharepoint/archive/2013/11/11/how-to-add-refiners-to-your-search-results-page-for-sharepoint-2013.aspx
    The reason you want to use the ows_columnname crawled property is because it is of the correct data type. The other is always text. If the site column is a date or a decimal then using the OWS_Q_TEXT... crawled property,will cause the refiner not to display
    the appropriate control, for example a slider control for a date type refiner.
    http://sharepointfieldnotes.blogspot.com/2013/05/understanding-and-getting-sharepoint.html
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

Maybe you are looking for