Color Nook won't connect to WRT320N

I am trying to connect my wife's color nook wirelessly via a WRT320N .    My network shows on the nook, saying "secured with WPS/WPA2 PSK". but when I go to it and type in the password I get a message on the nook "unable to connect to the network".
Any ideas??
Thanks for your help!
Bob

Disable the security on the router temporarily and try to connect.  Then go back and add your security back.

Similar Messages

  • HP LaserJet Pro 200 color M251nw won't connect for updates

    Printer works fine with desktop and wireless. Can't get it too "UPdate" or connect with webservices.
    How do I connect too my Ipad as well...???

    Hi Dakine50. There are a few possible reasons the printer will not connect to Web Services (which will allow for updates). The first thing I recommend would be to turn the printer off. Unplug your router and count to 10. When the router comes back online, turn your printer on. When your printer is back online, try to update again.
    If that fails you can set a Manual DNS in your printers Embedded Web Server (EWS).
    Print a network summary page to obtain your printers IP address.
    1. On the printer's control panel, touch the Setup icon. The Setup menu opens.
    2. Touch Reports .
    3. Touch Network Summary . A network summary page prints. Locate the printer IP address.
    4. Open a new Web browser window (such as Internet Explorer).
    5. Type the IP address from the network summary page in the Web browser address window.
    6. Press Enter to open the EWS.
    7. Click the Network tab. Here you need to find the section that allows you to set a Manual DNS (cannot recall which sub section it is under).
    8. Set the: Primary DNS: 8.8.8.8 and Alternate DNS: 8.8.4.4 . This will route through Google's DNS and will usually resolve the issue.
    9. After you apply these settings, if your EWS has a Web Services tab, try to enable them through there.
    *Sometimes a network reboot as I instructed above is necessary for those changes to take effect.
    Let me know how it goes.
    More steps to try.
    A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​dlc=en&docname=c03325484&lc=en&product=5255956&tmp​...
    Getting the Latest Firmware and Product Updates:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03341482&tmp_task=useCategory&cc=us&dlc=en&lc=e​...
    Printing from an Apple Mobile Device
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02796271&tmp_task=useCategory&cc=us&dlc=en&lc=e​...
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Help: 4g Color iPod Won't Connect

    I recently picked up a 40gb iPod Photo, and I have connected it twice to put my iTunes library on it, and it worked fine, but now when I connect it, my computer freezes (once I disconnect, it immediately unfreezes). What should I do?
      Windows XP Pro   iTunes version 6

    First step of troubleshooting for me would be to make sure you have the latest updates of all softwares and that your windows is up to date. First, visit the microsoft website and check to see if your computer needs any windows updates. Also, make sure you have Service pack 2 if you have Windows XP, or Service Pack 4 if you have Windows 2000.
    Once you are certain that you have your windows software updated, download and install the latest updates for itunes and ipod if you do not have them.
    Once you have all softwares updated, it's time to look at your drivers and directx

  • New computer won't connect to internet

    I just got a new hp pavillion computer and it won't connect to my wireless. The details say something about IPv6 connectivity having no network access. I'm sending this from a borrowed Nook Color and my wireless is working just fine. Can anyone please help me?

    Sorry about that; it's an HP Pavillion 20.  However, after calling everyone under the sun, I found out that my router was too old (bought in 2004) so I went and bought a new wireless router.  I'm online now and everything is great.

  • We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

    I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
    Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
    Thank you!

    Here's an update:
    Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • IPhone won't connect to wifi at all!! Please help.

    I have an iPhone 4 and I don't use it as a phone any more but I do use it for downloading songs and stuff of wifi, kinda like an iPod touch but I dropped it in water(not the first time I have done this) and as usual it will come back alive after drying but this time the wifi says no wifi and it is colored light gray.everything els is normal about the phone except I can't get Internet via wifi. Can someone tell me if there is another way to access the Internet with this device or how to fix the wifi? Oh and one more thing, when I go to general and press about I see that the wifi address says N/A so I don't know if I can just get a new address or what.

    "followed all directions"
    so you followed ALL the steps described in these articles?
    iOS: Connecting to Wi-Fi - Apple Support
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    iOS: Wi-Fi settings grayed out or dim - Apple Support
    If so, since it states:
    If someone else set up your network, ask them for help. If you’re using a network at a company, school, hotel, store, or other free Wi-Fi location, find an employee for assistance.
    If you're connected to a Wi-Fi network but you can’t get online, try to use your Wi-Fi network on other devices. If you can’t get online using your other devices, there might be a service outage. Call your cable company or internet provider for help.
    Try connecting to a Wi-Fi network in a different location. If your device can connect, you’ll need to get help with your Wi-Fi network. If it can’t connect to any Wi-Fi networks, contact Apple.
    Update your Wi-Fi router with the latest firmware and make sure the router supports your Apple product. For more information, contact the manufacturer of your router.
    Who set the wifi?
    what other devices did you try?
    what did the internet provider say?
    did you try different wifi locations?
    Thanks for taking more time to post your problem and for using Apple Support Communies
    Truly yours
    James
    <Edit> : OK great

  • My Mac Pro won't connect to Wifi?

    My Mac Pro won't connect to the Wifi that it has been for the past 2+ years. All other devices in our home that use the same Wifi are working just fine.

    Tried doing Network Diagnostics multiple times, did not work. Keeps saying it can't connect or times out.
    What color was the light pertaining to Wifi in the left column?  Red, Green, or Yellowish/Orange?
    Some of the following you may have already tried:
    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT4628  Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • My HP OfficeJet Pro 8600 won't connect to my wireless router

    This is bizarre.  I have had my HP OfficeJet Pro 8600 for about 6 months.  It has generally worked fine, and we have used it wirelessly only.  But now it refuses to connect to the router.  It can FIND the router, and it can find other networks in the area, but it won't connect to the router.  I ran the Wireless Network Test, and the results say:
    Wireless On - Pass // Wireless Working - Pass //
    Network Name (SSID) found - Pass //  Wireless Networks Detected - 9
    Printer Settings Consistent with Wireless Router Settings - Pass / No Filtering - FAIL //
    So it recommends solution as follows: "1 If MAC Address filtering is enabled, and you would like to keep it enabled, you must add the Mac address of your printer to the list of permitted devices for your router before continuing."
    Except, guess what, I don't have MAC Address filtering enabled.  I wouldn't know how to do that, much less check for it.
    Also, before today, this was never a problem.  HELP!
    Thanks....
    If you are interested, here's more detail and background.  
    Before today, the only problem we have had is that frequently our Apple laptop (OS X 10.6) has trouble connecting to the printer.  This has been odd because the printer is connected to the network, and so is the laptop, but the laptop can't find the printer - it thinks the printer is "offline" (even though it's not).  Usually, if I wait a while, it will find the printer, and it will resolve itself work fine.  If not, we sometimes have found that it can fix itself if you restart the laptop -- restarting the printer does not make a difference.   In fact, I did exactly that today, and it resolved itself.  And I printed.  Fine, right?
    But then I wanted to do more printing, and the problem of the laptop not finding the printer came up again, so I decided to really "get to the bottom of this."  I don't remember exactly what I did, but somehow I was persuaded by the online help, that the correct solution would be to go into my System Preferences / Print and Fax, and click on the "-", which de-installs the printer, with the idea of re-installing the printer.  But then when I tried to re-install the printer, it could not find the printer.  Ugh!  Wierdly, it found an 8600 Scanner, but not an 8600 printers.  After installing and de-installing the 8600 scanner a few times, I eventually deinstalled everything, and I decided to start from scratch.  I got my HP disk, and installed all the software again from the beginning (even though it was already there), and then it looked for my printer, but couldn't find it.  So then I got a USB cord, and plugged that in.
    So, now I have a situation where I do have a working printer via the USB cord, but no wireless connection at all.  In particular, since the Office Jet Pro 8600 won't connect to the router, I don't know what else to do.  My Apple MacBook pro is 2 feet away from the printer, and it is connected to the router just fine (as is my blackberry), and I have never before had a problem connecting to the wireless router by the printer.
    Any suggestions?

    There are two things that can trip the mac filtering test to fail:  actual MAC address filtering setup (sounds like this is not the case) and using wireless channel 6 or automatic for wireless channel in the wireless network settings (in the router).  Since it does show failed for MAC filtering and you do not use this option, try changing the wireless channel in the router to 1 or 11.  Those two channels provide the best compatibility with printers due to less interference.  Almost everything defaults to auto or 6 for the channel and this causes a lot of interference.  This change should not affect anything at all.  To do this, you may need to contact the router manufacturer as the process differs from router to router.
    What brand and model is the router?
    Has anything in the network settings changed at all?
    What version is the Mac OS X?  There may be additional steps to take as it sounds like there are two separate issues involved and this could be revisited later.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Color Nook can no longer access library . . How can I resolve this problem?

    I have a Color Nook. Recently it was updated automatically. Since the update I can no longer enjoy reading the library books I once could. I used  Overdrive and Adobe Digital Editions to access my county library in the past but can no longer access it.. I get an error message of E_AUTH_BAD_DEVICE_KEY. Apparently I have lost authorization to the AdobeID server.
    How do I resolve this problem?  

    Well, you could start by asking in the Digital Editions forum,
    http://forums.adobe.com/community/adobe_digital_editions
    This is the Reader one.

  • TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

    I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

    HI,
    The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
    Any other sort of Apple ID is not a Valid AIM Name.
    A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as  Jabber Name/ID.  (Google Run  Jabber server).
    Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another.  (As A Starting point consider it "impossible")
    iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen  (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
    Apple IDs can be any valid email (or an @mac.com or iCloud registration)
    Therefore you could make a Google ID into an Apple ID.
    However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
    Valid AIM Screen Names in Table (pic)
    7:46 PM      Monday; December 5, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HP 6520 wifi won't connect

    Just took a 6520 out of the box, trying to set it up/print to it from a windows 8.1 computer, after returning a 4620 printer that had the same problem.
    Ran the setup software. Setup software can't even manage to figure out what wireless network the computer it's running on is connected to - useless.
    Printer can find the wireless network, and when using the wrong password, won't connect, citing wrong password.
    When I use the right password, it just fails to connect.
    I've rebooted my router, rebooted my computer, rebooted the printer. No good. Print doctor software is useless as it can't even find the printer.
    I've turned off MAC filtering on my router, and disabled Windows Firewall. Nothing.
    I have an epson printer that has no problem connecting, and every other wifi capable device I own can connect to my wifi with no problem, from both Android and apple phones to tablets to four different PCs and laptops to my freaking nest thermostat. Why can't my printer manage to just work over wifi?
    I do not have a USB cable for the printer (it wasn't sold with one), btw, so trying that is out (besides, I bought this as a wireless printer, not a wired printer).
    Help please.

    Hi MattMihaly,
    Welcome to the HP forums!
    I see you have a Photosmart 6520 and a Windows 8.1 computer that don't seem to want to talk to one another. I'm sorry to hear this, but I will certainly do my best to help!
    I would suggest you start by following the steps for Windows 8 in this 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati... document (make sure to follow the Option two: Connect with the Wireless Setup Wizard under Step five). If that doesn't resolve it, please try the steps under Your printer has never worked over the network in the HP Wireless printing center.
    I realize you may have tried some of these steps, perhaps all of them, before but often trying them in a specific order is what makes the difference
    Let me know how this goes for you!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • My HP OfficeJet 6500A Plus printer/scanner/fax/copier won't connect to my wireless network

    I tried going through the Wireless Network setup on my HP OfficeJet 6500A Plus machine. The printer recognizes the network and I then type in my network's password but it won't connect to the network. What can I do? I would like to be able to print and scan wirelessly. Help please!

    Hello erking,
    Sorry to hear that you are having an issue with connecting the printer to your Mac over a wireless connection.
    I have done some research and I have found a great document that deals with The Printer Is Not Found During a Wireless Network Installation.
    Please feel free to write me back and I will be happy to assist you further with any questions or concerns you may have.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

    I just got the new ipod touch (5th generation) and it will show up on my computer but it will not show up on itunes and it won't connect. Please help!

    See:
    iOS: Device not recognized in iTunes for Windows
    You need iTunes version 10.7

  • IPOD won't connect to Windows or show up in itunes...HELP

    Have my daughter's 30 GB 5th Gen Ipod here. When you plug it into the computer with the cord, it will turn on, and charge. However I get a balloon come up that says "One of the USB devices attached to this computer has malfunctioned, and Windows does not regognize it. For assistance in solving this issue click this message." I clicked the message. It shows the Ipod in Device Manager as an "unknown device" and when you try to update the driver, it says there are no better drivers to install than the one currently installed. I have tried the 5 R's step by step several times, and that does not work. I can not restore it because it does not show up in itunes. I have tried it on other computers and it does the same thing. It plays the music she has on it, works fine, but we can not get it to connect to either computer. Her friend's Ipods connect to both our computers fine, and will download songs etc. I also have tried putting it into disc mode to see if it would go into itunes so we can restore it. Same message comes up when you have it in disc mode. I have also tried the "tap on the palm" suggestion, which made no difference at all. It just won't connect. I do have the newest version of itunes downloaded and installed.
    I am at my wits end with this thing! PLEASE help me get this thing to connect.
    Thanks!

    Start with these articles and see if that gets you anywhere (yes I know some of these you already tried) ...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod shows up in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Also this semi-recent interesting post by a user here for a work around when an iPod is in the "recovery mode" looping state...
    http://discussions.apple.com/thread.jspa?threadID=1679535&tstart=0
    Cheers,
    Patrick

Maybe you are looking for