Color not sending back all the video lines.

I am working on a color project that is pretty in depth. I finished rendering all the clips but when I send it back to final cut it only send v2 and v3. V1 just comes back unrendered and uncorrected. I hope I am clear enough. any help would be great.

On the COLOR timeline, what is the range of clip numbers on V1?
What is the range of clip numbers on V2/V3?
Can you search for .movs that correspond to these clip ranges, specifically, media with names like 1_g1.mov, etc. If the media is being rendered, you will find it this way, and lets go from there.
jPo

Similar Messages

HT201269 I followed the steps But I did not get back all the aps?

I followed the steps But I did not get back all the aps?

Apps have never been included in the backup of the device.
Are the apps in the iTunes library on your computer? iTunes can only sync apps to a device that are in the iTunes library.

Syncing a moved folder is not bringing back all the photos to Lightroom

I have moved and renamed a folder in the external harddrive. Syncing that moved folder in lightroom is not working in bringing back all the photos to Lightroom - Although all the photos exist in that folder as I have confirmed through windows explorer.
Another Option: If I choose "import photos to this folder option" in LR and browse to the source to that folder - the missing photos are shown as shaded back and the import button (bottom right corner) is not highlighted. Therefore I cannot select these missing photos and hence cannot import them to the folder.
PLEASE ADVISE!

In the Folders Panel, the original folder should be listed with a "?" mark, because Lightroom can no longer find it. Right-click on it, select "Find Missing Folder", then browse to and select the renamed folder in its new location.
Note....these type of problems will continue to happen if you continue to rename and/or move folders or files outside of Lightroom. Do it using Lightroom and no such problems will arise.

Safari 3.2.1 on Mac 10.5.6 accept cookie, but NOT send back to bonjour URL

See the detail log on this thread.
http://discussions.apple.com/thread.jspa?threadID=1929198&tstart=0
The web server's hostname is, for example, FC9Linux. It has a bonjour broadcast for its web.
In Safar->Bookmarks->Show all bookmarks, open "bonjour".
It will list all http server discoved throught bonjour. Click the item 'FC9Linux', it will use the URL 'http://FC9Linux.local./' to visit the web server. Then the cookie issue discribed in thread bellow happens.
Safari can accept the cookie, but will not send back to the web server in its http header. Then Safari can not login with the URL like 'http://FC9Linux.local./'. Safari can login with the URL 'http://FC9Linux.local/'(remove the tailing dot) or 'http://10.32.100.23'(ip address), the cookie works.
some others also has this issue.

Hello,
"I have trolled all the sites for safari problems on 10.4.11 and tried some of the things indicated"
Before we make suggestions, what exactly have you tried so far?
Carolyn

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I. We are able to do video chat through gmail, but I had hoped to use iChat. I am using OS 10.6.8, iChat v. 5.0.3. What am I missing?

HI,
iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
However it will not Video to the Web Page login to iGoogle or the Web Mail Page login. (where people can Google Chat as it were in a Web Browser).
Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
More on this here This article has been changed several time in the recent months. It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
It could be Internet speed but at this stage I would doubt this at this stage.
10:27 PM Saturday; January 21, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?

I dowloaded ios5 for my iphone4, and when i finished the backup i lost all the music and all the videos i bought from the iTunes store. How can i get it back?

Backup do not contaiuns music or apps, you will either need to resync them from your itunes computer, or you can go to purchase history in itunes or app store app and go to purchase history and redownload them.

Is there any way in Mavericks to go back to the old "line label" color strips instead of the new mini dots, which are virtually worthless they are so small and faint.

Is there any way in Mavericks to go back to the "full line" color label as opposed to the mini dots, which are too small and faint and virtually worthless?

Unfortunately, not.
You can file feedback here. The more who file the more chance it will get done.

I SET UP THE HOME SHARING ON MY COMPUTER, AND i CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HELP

I just bought my apple tv yesterday and SET UP THE HOME SHARING ON MY COMPUTER, I CAN STREAM MY PHOTOS AND SEE ALL THE VIDEOS AND LISTEN SONGS IN MY ITUNES, BUT CAN NOT DO HOME SHARING, ON THE TV, ALWAYS SHOWS "TURN ON HOME SHARING ON YOUR OMPUTER WITH YOUR ID WHICH I DID BUT NOTHING HAPPEN. WHAT'S WRONG? WHAT SHALL I DO NOW?

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

HT4623 I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

"Unlike". iOS 7 doesnt display well on my 4S. iOS 6.1.3 should still be supported for older hardware. I think I shall me moving to Samsung Galaxy now. Was really hoping hte new iphone would get a bit larger.

Updated ipod touch to ios 6.1 and now all the videos in playlists are not shown. What to do??

Updated ipod touch to ios 6.1 and now all the videos in playlists are not shown. What to do??

Thanks !
The only thing I didn't do right is that I didn't Erase all content from iPod... I did it from iTunes...
Technique worked for me !

Right now my ipod is set on 'music'. When I push the menu button, it will not go back to the main menu's, but I can still go to all the music and play it.

Right now my ipod classic is set on 'music'. When I push the munu button, it will not go back to the main menus, but it will still go forward and select and play music normally. I tried resetting it by holding the menu and center buttons until the apple logo appeared, but the problem is still there.

If your battery level is low, recharge it first for at least 2 hours, preferably 4 hours.
After the Apple Logo, you release the buttons, what do you see on the iPod screen? (language selection?)
Have a nice day!

Exception message not thrown back to the page

Hello All,
I have a servlet that listens for some data. Everything works perfectly if the data is intact. I do a whole bunch of processing on the data and verify its integrity etc...
HOwever if something is wrong, my app throws an exception and I could see from the system outs that the exception message I want to send back to the browser is being printed. But the browser does not completly load the page. In internet explorer, the page status still reads "opening page ........ "
If I see the trace it is past the out.print) line where the error message has already been printed out.
Is this a browser issue? Any suggestions are welcomed.
Thanks,
Praveen.

The response of the servlet should go back to the mainframe system from which I receive the data. But for testing purposes I am sending the data through a url's get parameter. So I really do not want to make a error page.
What is bothering me though is that the response gets printed in the command window and still not shown in the page giving you the impression that the request was never fully completed.
Any ideas ?
Thanks,
Praveen.

GWIA not sending mail to the internet

Let me start out saying that i have no experience with Novell products. I am a person starting a local business and in need for a email server. I have chosen GroupWise 8 for many different reasons. I have Windows Server 2003. GroupWise 8 has been deployed successfully. I am able to receive emails from the internet, but not send emails to the internet. I ether get a error 450 or 550 error. Thats all on the GWIA. I have made a route.cfg. I have no idea if I have the correct IP address of the domain I'm trying to send email to(E.G gmail.com) How could I find out the IP Address of a email domain so I could put in the route.cfg file? I tried doing the ping but no luck. I have everything setup correcly on the domain register side. So, could some please describe what those error codes above mean and how this problem could be fix. Any kind of help will be appreciated. Once again, i have not experience with GroupWise or Novell Products. I'm trying to train myself!

Originally Posted by konecnya
You have a lot mixed in there
- DNS timing out could be a part of the problem. You might want to review
what your DNS servers are, you might have one that is lame or dead and
should be removed
- remove your resolve.cfg for now
- When talking of MX records, try to keep it clear about which domain you
are talking about. For your problem we are only worried about you being
able to resolve the MX records of domains you are trying to send to.
- If both MX records for your domain point to the same host name, then
you'd be just as well off with just one entry.
- If you have a successful DNS resolution, then it is possible that you
are blocked sending out on the SMTP port. From a command line,
telnet gmail-smtp-in.l.google.com 25
if you are blocked, you will get a "Connect failed"
if you are not blocked, you should get either a connection refused, or it
will report something like
220 gmail-smtp-in.l.google.com Ready
if so, type EHLO to get a bit more, then type QUIT to disconnect.
Let us know what works and we'll take if from there.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: View Profile: konecnya - Novell Forums
Thanks for that! So I did what you told me with the Commend Prompt, and it came back as "Connect Failed". So I'm guessing that this is a ISP problem now? Am I correct?

HT3775 BDMV" can't be opened because it is from an unidentified developer. How do I solve this?? Am I losing all the video files I have in my camcorder??? Please help me!!! Thanks

I am downloading the memory card from my camcorder into my MacBook Pro with Retina display. It usually popped to the file called AVCHD then CLIP to show all the videos. But not this time, it automatically changed to BDMV. I do not have idea how this happened while I left my notebook on and I was away for a couple of hours then back to the living room to work on each video as to type name of file etc.
Now, I cannot even open them into CLIP because I am still getting BDMV with a popped sign that said BDMV can't be opened because it is from an unidentified developer. (I do not even understand what this is supposed to mean??) also with the bottom message that stated "Quicktime Player created this file yesterday at 1:52pm" I am like uhhh how can QT player do this without my authorization??
Please help me how to solve these and get all of my videos back that I saved in my camcorder. Let you know that I tried to insert the memory card back into my camcorder and all these videos are gone. Now I am having a HUGE headache because of this!!
What should I do now???

HI,
Did you ever figure out how to get them back? The same thing happened to me yesterday. I was able to open the file in VLC media player (you can download this app), but the file had been corrupted. It was only the last clip I had recorded, all the others were lost. Even the clip that will play is messed up

Separating multiple AVCHD clips on the video line

Hello everybody
I'm new kid in town and I like this forum as far as I read in other topics. And I come from Greece.
I started recently working AVCHD small films and clips.
When I say 'get file' I choose a file with extension *.m2ts from SONY and I put it down on the video line. That's the extension what I'm principally working with.
My problem is that when I want to put a second file on the video line then it goes automatically with the first one in the same place and not separated. The same thing with more files.
There is also a small sign on the top right side of the first clip (a small piece of film sign of blue color).
Of course I worked before with other normal films about 2 years with Adobe Premiere and other Softwares. This is the third time I buy Premiere.
Do I do something wrong?
TY for helping
Vladimir

Vladimir, make sure you are working in the Timeline mode. Not Sceneline. This will give you more control over your clips.
Also, make sure that your Premiere Elements project is set up the same of the video in your camcorder. In other words, since your video is AVCHD, make sure you are using a project with the AVCHD settings. Also, if your camcorder is using 5.1 audio, make sure your project is set up also for 5.1 audio or you will experience unusual behavior. For instance, when you try to put a video clip on Video 1, it will move to Video 4.
Does that make sense?

Color not sending back all the video lines.

Similar Messages

Maybe you are looking for