Color of error wire in 8.2

Just wanted to know who came up with that idea - I mean, there are so many beautiful colors ....

I like the idea, that the error cluster doesn't look so much like some normal cluster, but this color is really a hard hit.
But Ben, you're completely right - we better concentrate on the "real" thing and leave the colors to those who have a feeling for it
(for those who have no 8.2 installed, please see the attached screenshot )
Attachments:
capture_06092006_095452.jpg ‏24 KB

Similar Messages

Invalid Color Space error after update Reader to 9.3.3

After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A. This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
Exports in other formats, other than PDF/x-1, X-1A and X-3 open normally. How to solve this??

any suggestions?

Why Invalid Color Space Error?

Hi Everyone,
I am receiving numerous "invalid color space" errors when viewing PDF files in Acrobat Reader (v 11.0.10) on Windows 8, but have not received similar messages when using Acrobat Reader (v 11.0.10) on Mac OSX 10.9.5. I will outline our environment and workflow below.
The PDF file is created via the export of an InDesign CC 2014 document. No errors show up on the preflight panel, and no warnings show up upon export. The file can be opened fine in the Mac environment with both Acrobat Pro 11.0.10 and Acrobat Reader 11.0.10. I can navigate through pages, print, and add comments in both applications.
When this same file is opened on Windows 8 it initially loads, navigates pages, and will allow a few comments to be inserted before showing an "invalid color space" error. If the error occurs during commenting, the comment will disappear, and I am no longer able to scroll through any other pages since the error reappears.
I would think that if it was file corruption the problems would be on both Mac and Windows. Any suggestions would be extremely helpful as all of my searches point to a non-Adobe product (as either the document source or PDF generator) as the culprit with this error.
Thank you!

Hi Racheal ,
Please refer to the following link to see the actual cause for "invalid color space" error and the possible solutions to deal with it.
http://blogs.adobe.com/dmcmahon/2011/05/17/acrobatreader-invalid-colorspace-error-opening- a-pdf/
Regards
Sukrit Dhingra

Error "Wire: is a member of a cycle

I am doing decoupling control of MIMO system in LabVIEW Control Design and Simulation module. Simulating the controller and the plant transfer functions, gives the error "Wire: is a member of a cycle".I understand this is coz of the Three transfer functions in the trnsfer matrix having equal number of poles & zeroes showing Direct feed through behavior. As I can make no changes in the plant or controller models, can anyone suggest a possible solution for this?plzz
Solved!
Go to Solution.

krishnapriyapg wrote:
Sir , the output from 7 is given to the negative node of the summer near level SP(to 10) . In the bd, it looks like both are given to the same node is just a mistake happened while cleaning the wires in the diagram . However the connections were correct. I have attached the screen shot again.
oops never mind too early in the morning
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Error Wire always in the background if crossing other wire

If you need to wire cross other wires it would be nice just for the optic to have the error wire always in the background of the cross. Now the wire which is connected first is in the background and all other overlay it.

Duplicate of http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Always-place-Error-Wires-underneath-other-wires/idi-p/2214142

FreeHand 11 Colors picker error on launch in Snow Leopard

I hava new 27 inch imac running Snow leopard 10.6.2. I got FreeHand 11 running great for the last two weeks. I always got an error on launch saying " Colors picker error. " Invalid color file. I click OK and it worked anyways. Today FreeHand launches and then quits when I click OK on the error. I reinstalled freeHand with no luck. Does anyone know how to fix this?

Reinstalling FreeHand does not overwrite the Preferences or Settings files with new copies. If the problem is a corrupt file in that folder, you will have to remove it.
I suggest you make a backup copy of your Settings folder and then delete the original folder. FH will write a new Settings folder when it launches. If the problem is in the settings folder, then FH will launch.
The Setting folder is here:
Users/[Username]/Library/Application Support/ Macromedia/ FreeHand MX/ 11/ English/ Settings
Were you using ColorSync profiles as part of your color management settings? A corrupt ICC color profile could be causing the problem. Have you created any new profiles or installed software that adds profiles? If you search your hard drive for .icc with 'System Files are included', you'll see where .icc files are stored.
Judy Arndt

HP Deskjet 2520hc color cartridge error message

HP Deskjet 2520hc color cartridge error messageAfter turning on the printer the ink indicator shows 3/4 color cartridge. Before the advent of the issue printed approximately 100 pages. After you print the first worksheet, an error is raised: the color cartridge is damaged. ... Print quality is good, including photos. To print the next page you need to turn off the printer and turn it back on. After printing error occurs again. All the recommended steps: cleaning the contacts of the printer, rebooting, no result is given. Ask for professional help.

Hey , The cartridges you used when you got it are SET-UP cartridges and it says that on the side of the cartridge, correct? If so, they are used to initialize the printer but not made for longevity or high print yield. After the set-up cartridges you have to purchase normal cartridges that have significantly higher page yields and contain more ink. I'm sorry that you are not in a position to purchase more ink right now but unfortunately for you to continue printing you need all the ink cartridges and will have to invest in new cartridges while the others run out. To conserve ink try printing all your documents in black only. Your color ink cartridges will run out a lot slower. (be aware that even when printing in standard color and printing black text documents, you will still be drawing color ink.) Hope this clears this up for you a bit. Have a great day!

Size/color of error message

Hello All,
Is it possible to change the default size and color of the WebDynpro error/warning messages? Can we somehow change the icon, displayed next to the error/warning mesages?
Thanks,
Asheesh

Since webdynpro is suppose to be a standard business UI, I doubt that there is a easy way to change the look and feel of the messages.
Regards,
Rich Heilman

CS6 not opening in CS5 color books error

When I save a PhotoShop CS6 file, the computer we still have running CS5 will not open the file. The error message is... "Could not complete your request because the specified color book cannot be found." What are the work arounds for this?

There was not a PMS color channel but there was an alpha channel. I deleted the channel and had them open the file in CS5 and it opened fine.

Incorrect number of color values Error

Hi All,
I am getting an error stating "Incorrect number of color values was given" in the following Indesign Script.
var currentPage = myDocument.pages.item(0);
var myColor = myDocument.colors.add();
myColor.colorValue = [82,60,0,0];
var recFrame = currentPage.rectangles.add();
recFrame.fillColor = myColor;
Am getting the above mentioned error when the third line is executed. Kindly help.
Thanks in advance,
Anitha

MichaelKazlow wrote:
Ask in the InDesign forum.
Hi,MichaelKazlow!Thank you wharimucs desing forum!Shared:(hungary)http://www.paladin9.5mp.eu,www.mozillafirefox.5mp.eu
Hi vegh abel, im hungary!good bye!HI HI HI!Happy New year 2010!Adobe happpppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppy+zip file
Hi vegh abel Im hungary!Good bye!
Message was edited by: Végh Ábel

Passing error wire - connected to an undirected tunnel

How can I pass error cluster wire between stacked sequences ??
For example in the state machine - the error cluster wires should pass data from previous stacked sequence CASE 0 to CASE 1.
How can I do that ?
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

I have searched many times on this forum.
How can one do the following in terms of state machine :
Have a FOR loop that has N cases
For each iteration "I" the cases 1-N repeat.
One way is to convert those 1-N cases to another state machine and reuse it under the main state machine (for example the one I showed).
How else could one do it., Please explain this. As this is most common kind of coding I will have to face through out my development and I dont want to complicate it by having nested state machines.
Even a simple sketch will do it.
Thank you.
Abhilash S Nair
Research Assistant @ Photonic Devices and Systems lab
[ LabView professional Development System - Version 11.0 - 32-bit ]
LabView Gear:
1. NI PXI-7951R & NI 5761
2. The Imaging Source USB 3.0 monochrome camera with trigger : DMK 23UM021
OPERATING SYSTEM - [ MS windows 7 Home Premium 64-bit SP-1 ]
CPU - [Intel Core i7-2600 CPU @ 3.40Ghz ]
MEMORY - [ 16.0 GB RAM ]
GPU - [ NVIDIA GeForce GT 530 ]

Chunk expression .color returning error

Greetings, this one shoudl be so simple it is driving me
crazy. I'm trying to test and set the color of a word in a text
field, containing ten comma separated words, as follows in Dir 8.5
message window:
put member("test").text
-- "one, two, three, four, five, six, seven, eight, nine,
ten"
I can select a single word and set a color for it via the
color picker.
However, I can't seem to figure out how to return or set the
color of a word-chunk via lingo:
put member("test").word[3].color
produces a Script Error: Wrong number of parameters.
I've also tried this using other chunks like item, line and
char.
In the docs under "color" this example is given so it appears
that it should work:
member("myQuotes").char[4..7].color = rgb(200, 150, 75)
When I modify the field name and try this exact statememt, I
still get the same error when setting or returning the .color
property.
I figher it has to be something simple. Tried searching this
forum back several years but no luck. Can anyone help? Thanks

If you have MX or lower I believe there are two problems with
the field member (as opposed to a text member which should work
with the posted syntax).
Problem 1 is that the fields don't have a color property on
an individual chunk.
You can however use the older foreColor.
Problem 2 is that the fields require verbose syntax when
referring to chunks.
set the foreColor of word 2 of member "test" to 128

Need to bypass "Remove and check color cartridge" error message

I have an old HP printer giving me the error message "Remove and check color cartridge." I remove it, it's good, I put it back, same message. I try leaving it out, I get an error message asking me to install a color ink cartridge.
I DON'T EVEN WANT TO PRINT WITH THIS PRINTER. I have a new HP printer connected to my wireless network that I use for all my printing. I am using the old printer for its scanning capabilities in my crafting area. I am JUST wanting to scan old pictures to an external hard drive for storage, so that I don't have thousands of print photos sitting around in boxes and files.
Please help.

I had the very same problem with my HP Officejet 7410 so cleaned the ink cartridge and carriage contacts per the directions listed on this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01423559&tmp_task=solveCategory&cc=us&dlc=en&la...
After my first attempt at cleaning these contacts, i reinserted the cartridge and tried printing again but I got the same error message. Next I removed both cartridges (color & black) from their slots and after pointing a flashlight at the carriage I discovered the bottom of the carriage was covered with ink, so....using over a dozen cotton swabs I cleaned the bottom of the carriage as best i could. Also, thinking that perhaps the ink cartridge was not manufactured exactly to its proper size and shape, when i inserted the cartridges back into their slots I slightly pressed them in to be sure the contacts would touch.
I was happy to see that now the error message is gone and my printer is printing again....well, at least for now.

Color Management / Error Message

In Adobe Bridge all pictures show a strong and un-natural blue tone. Trying to use the colormanagement to applicate my (calibrated) monitor profile, I get the error report:
"Suite color management is not activated. Suite Color management is only possible, if a registered product has been started in advance, to activate this function"
But - my CS4 IS registered!!
Any Idea?
Background: I have been using a 30-days trial, then bought the product, and didn´t install it from the CD, but only registered CS4 in the startinng dialog. Perhaps better de-install everything and install it new from CD?

Hi there
It sounds like you might be using Adobe Bridge, correct? If so, you can try reading through this help article that matches the error message you're receiving: http://helpx.adobe.com/creative-suite/kb/error-suite-color-management-enabled.html
If you are indeed using Bridge and need additional help, please post again so that I redirect you to the correct forum.
EDIT: Most likely, you've installed Adobe Bridge with an individual product such as Photoshop or Illustrator, and not as a Creative Suite - see below.

Color Synchronization Error

Hello,
I'm trying to synchronize the same color settings for all of my Adobe applications (CS3). So, I used Bridge to go to EDIT-->CREATIVE SUITE COLOR SETTINGS and picked my custom color setting workflow from the options list. I then get the message that my color has been synched.
Now, when I close Bridge and go open Photoshop, I get the following error:
"The color settings file contains settings that are not supported by this version of Photoshop running on this system. These unsupported settings will be reset to their default values."
Does anyone know why I get this message and how I can correctly sync all of my Adobe apps? Thanks.

Hi,
I setup the following color settings (also suggested by Photoshop Gurus and lynda.com). It can only work in Illustrator, but not Photoshop. I don't know why Photoshop gives me the error that it's not supported. Anyways, here's the screenshot for how I have color setup in Illustrator:

Color of error wire in 8.2

Similar Messages

Maybe you are looking for