Color off when printing from iPhoto if photo was scanned in.

When I scan a photo to a file or into an application and try to print from iPhoto, the colors are off. Usually darker than they appear in the photo. If I do a direct print from the scanner to the printer the colors look normal (OK). Any idea if there is some type of adjustment for this?

What color profile do the pics have? Is the printer set to the same profile?
Regards
TD

Similar Messages

When printing from Iphoto the photo is cropped at the top

When printing from Iphoto, the image is not the same size as in Iphoto. The top of the photo is always lost.
If I copy the image to preview and thence to Word the photo prints in full..... Why?

Because you are printing a different size than the image - you give no details so one can only provide generalities
If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
Crop to the dimensions of the print - and you will lose nothing
LN

Printed photos from Aperture 3.2.1 have lines through them - don't get that when printing from iPhoto

I recently downloaded Aperture 3.2.1 and after editing a couple photos (love that process!), tried to print them. Both had horizontal lines across the entire photo. I don't have this problem when printing from iPhoto.
As an FYI, I have this problem when printing from PSE too, but worked around it by importing edited photo back into iPhoto and printing from there. I don't want to do that with Aperture, because they have much better printing choices.
I have a Canon MP 500 & a Canon IP 4300 - same issue with either one.
I contacted Canon tech support and got this reply:
We appreciate your correspondence regarding your PIXMA MP500. I am sorry that lines are printing through photos printed from aperture.
If aperture is the only program the issue occurs with then the print setting in aperture will need to be changed. You will need to use the icc profiles for the paper you are using. For details changing the print preferences in aperture please goto: http://www.redrivercatalog.com/profiles/how-to-use-icc-color-printer-profiles-ap erture-3-canon.html
I looked at the link and basically had a brain freeze. It was very complex, and I was concerned that it was for Red River papers - I use HP paper.
I called HP to get their instructions for icc color printer profiles - complete zero. They said it's a printer issue and would be happy to sell me a HP printer.
Please, can anyone help a struggling Aperture newbie? I'm so frustrated.
Thanks - Jma

Hello Kirby,
Your recap is correct. I ran Apple Software Update and both programs are up to date. I looked on Canon's site and there are no new firmware updates for either printer.
When I select "print" in Aperture, I've selected the Canon MP500. Under the "Rendering" section, the color profile offers six different selections that include the MP500. I've tried them all. They all have lines through them. There is a note, in grey, beneath the Color Profile box, that says to "Turn off color management in the printer driver". I have absolutely no idea how to do that, and I've googled it, to no avail
Under "Render Intent" I've tried both selections - Relative Colorimetric and Perceptual. Still, lines through both.
This is really discouraging. Both printers work perfectly fine - with iPhoto, so it's hard for me to justify buying a new printer. And how do I know I wouldn't have the same problem with a new printer?
Fingers crossed that this can be resolved. I have several photos I'm supposed to be printing for gifts. And if the problem is in Aperture or PSE, won't the lines still be there even if I use one of the online printing companies?

When printing from iphoto all photographs ar printed in a pop art style rather than as seen - how do I change this to printing the photo as seen

When printing from iphoto all photographs are printed in a pop art style rather than as seen - how do I change this to printing the photo as seen?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Damaged preference files can cause a varitety of problems which you wouldn't think it could. Deleting and regenerating the pref file is one of the basic fixes to try.
OT

Skin Tones Look Wrong When Printing From iPhoto

Hi
I'm having trouble getting the caucasian skin tones to look right on photos printed with my Epson Stylus C86 printer on Epson Premium Semigloss paper. They look too pinky/purple when compared with the screen of the Sony DSC camera I shot them with and also my iMac's monitor. They just look wrong as though the subjects have a combination of bad sunburn, high blood pressure and are blushing at the same time!
I've tried the following tips synthesised from other threads:
1. Downloaded the latest set of drivers from Epson's website.
2. Ensured that they are associated with the printer in ColorSync utility.
3. Selected the Use ColorSync option when printing from iPhoto's print dialogue box.
These made no difference to the default behaviour i.e. same color problems.
Could anyone guide me to a solution? I would rather not have to use another application to print them if possible. I'm not used to my Mac not "just working".
Thanks

What color profile do the pics have? Is the printer set to the same profile?
Regards
TD

When printing from my Mac all of a sudden when printing from IPhoto the picture is really dark. The test page off my HP color laser jet is just fine. It is not the printer although older. All of sudden it does not want to print correctly.

All of a sudden when printing from my desktop Mac in IPhoto the printout comes out black. My colors are fine on my HP color laser printer. I have printed many times and now all of a sudden it is not printing. A test copy from my printer comes out fine. I really think for some reason something has changed just in the last few days. Just communication with IPhoto and the computer.

As long as your cartriges are full, put a photo on you desktop, highlight it , click COMMAND P and the print preferences window should drop down, and select your printer and photo paper.

[FIX] Darker prints and color shifts when printing from Lightroom 2

Hi,
The problem :
When printing RAW or TIFF files from LR2, you get a printer output that
is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 3800 with the latest Windows driver
(6.50 - which is rather old by the way). The workaround described below
works for me under Windows XP SP3. It should also probably work with
other systems/printers/drivers. Use at your own (minor) risk.
The "official" procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the
profile dropdown list and select the ICC/ICM paper/printer profile that
you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. **Disable the color management from the driver's side** (in Epson's
drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, **this doesn't work** for many of us and this produces a
print that is dark and has color shifts as mentioned above. Note that
the same image prints correctly from QImage or Photoshop CS3 (that is,
the printer output corresponds to what you see on your calibrated
display).
Apparently, although color management has been (allegedly) disabled in
the driver, there's something wrong between LR and the driver which
makes that *both* LR and the driver are still trying to manage colors.
In other words, the "No Color Adjustements" option of the driver doesn't
seem to work with LR.
The workaround (found after hours of hair pulling and paper and
expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
ICM
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set **both** the "Input profile" and the "Printer profile" fields to
the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
then also select Pro38 PGPP in both "Input Profile" and "Printer
Profile". This has actually the same effect has disabling color
management in the driver (what "No Color Adjustements" should normally
take care of).
That's it. When printing, you'll get exactly the same color results as
when printing from QImage or Photoshop. No more dark prints. No more
color shifts.
One might think that the bug is in the Epson driver but in that case,
QImage would have the very same problem. So I tend to think that the bug
is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it
demonstrates the same problem as LR when using the "Match Print Color"
option for soft proofing. But in that case, only the preview colors are
wrong. The printer output is ok. Which also tends to demonstrate that
Adobe has the problem, not Epson. Or maybe both... :-) .
Don't ask me why some users have the problem and other don't.
Hope this helps.
Patrick Philippot
MainSoft Consulting Services
www.mainsoft.fr

A sincere thank you for your reply, Michael. Sorry about the "it just doesn't make sense" shortcut. I have been trying to solve this issue since LR 1.1, spending dozens of hours on different trials and digesting everything written on this forum and the B9180 forum about color management and double profiling. My shortcut was a summation of my experience (and my frustration) but doesn't really advance the conversation. Here are some data that should be more useful in diagnosing the problem.
I am running Windows XP SP2. I calibrate my monitor monthly with the Spyder. The reason I suspect this may be an issue of double profiling is because the results (moderately strong magenta overlay plus an increase in contrast) match what more knowledgeable people than I on this forum describe when double profiling occurs. Perhaps I shouldn't presume it is double profiling, and follow Patrick Philippot's lead in naming the problem "color shifts." Patrick does refer in post #2 of this thread, however, to obvious double profiling.
I certainly do have a successful and consistent print method. With PS CS3, and either my Epson 1280 or my HP B9180, the output is almost always dead on. Here is how I do it. In PS from the print dialog box, under color handling I always choose "Photoshop manages colors." Then under printer profile I select the profile designated by the manufacturer for a particular paper/printer combination. Then in the printer driver I disable printer control of color. With the Epson I check the box "Off (No Color Adjustment)." With the B9180 I choose the option "Application Managed Colors." While I sometimes may tweak the final output, these procedures have served me well with PS for several years.
Contrasted with my positive PS experience, my experience with LR printing has been inconsistent. I regret having to be so imprecise but truly sometimes LR produces accurate results that match the calibrated monitor, but most of the time it does not. I use standard procedures with LR that parallel the PS ones described above. In LR's printing panel, under color management, I specify the correct profile, just as I did for PS. Then in the printer driver I use the same procedures I use with PS. Most of the time the prints have the magenta overlay and too much contrast.
BTW, the inconsistent LR printing only takes place with my HP B9180. I have never had any problem with off-color LR prints with my Epson 1280. Again, I emphasize that I have standard procedures that always work with PS (no matter which printer) and LR (but only with the Epson).
Unfortunately the LR printing problems are intermittent. Some of the time (perhaps 20%) LR produces fine prints in the B9180, indistinguishable from PS prints. When LR is printing well, it will continue to print fine until "something happens" and the output shows the color shift. This means I do not get a random sequence of good-bad-good-bad prints, but rather good-good-x factor-bad-bad-bad. Ths problem is that I do not know what this "x factor" is. Once, when LR was giving me accurate output, I simply changed the default printer (Control Panel-Printers and Faxes) from the B9180 to my Samsung 1430 laser; immediately afterwards the LR output colors shifted. Did LR react to this change in default printers? Another time I had good LR printing success with version 1.2 but ran into the problems described above when I upgraded to version 1.3.
Sorry for the long post. I am hoping that someone will see something that I am missing and provide a hint. I think, though, that Patrick is correct when he states, "I tend to think that the problem is with LR. After all, similar issues (obvious double profiling) are observed only in LR but with various printers."

Pink colour cast when printing from iphoto

When I try printing from iPhoto to a Canon MG6150 I get a pink colour cast. The preview shows correct colour and I'm running out of paper with my attempts to sort it!
What has gone wrong as everything else seems fine?

Do you get the same results if you print the same photos from Preview? If not then it's definitely an iPhoto issue. If you get the same it's possibly more of a system issue or printer adjustment.
Check the Color Options (Printer) and Color Matching (iPhoto) settings in the print window. You might try tweeking some of them.
Your print window should have something similar.

Color management when printing from Reader 9

When printing from Adobe Reader 9 (Windows XP), the Advanced Print Setup gives the option "let printer determine colors". I presume that if this is selected the colors in the document will be sent unchanged to the printer. So, how does Reader 9 affect the document colors when printing if this option is NOT selected? Also, was this the same in Reader 8?
Thanks
Steve Fowell

It is using sRGB and that is the only color profile available.
In addition, when I try to print 4 slides per page and 1 slide per page, the colors are completely different than when I try to print 2 slides per page.
I have tried changing settings in print options and put them back to default and nothing I do changes the issue. Again, it only occurs when printing from Reader. Everything else prints colors perfectly fine.

Colour (Color) Mis match printing from iPhoto/Mac

I have just purchased an Epson R340 and, while it prints perfectly well from the memory card, printing from my Mac results in poor quality prints. The photos are reddy tinged and (from photoshop) out of focus or blurred. This is also the case when I print from Quicktime. I have tried unchecking ColorSync in iPhoto as well as playing around with a few other set ups but nothing gives me the same quality as printing from the memory card. I am running iPhoto 6 and Photoshop CS. Has anyone encountered or managed to fix this problem?

Also note that you don't want color management turned on with both Photoshop AND the printer driver, as the colors will be managed "twice". This will cause that red shift you are seeing.
This is from Photoshop's help:
"If Photoshop is handling the color adjustment or color management options during printing, turn off all printer driver color adjustment options. If not, specify the color management settings to let your printer driver handle the color management during printing. It's important not to color manage in both Photoshop and the printer driver simultaneously during printing. This results in unpredictable color."

How to get paper color profiles when printing from Acrobat

Hello,
I've been in trouble trying to print with specific paper profiles from Acrobat.
I'm running on mac os 10.8.5, and the latest version of the suite (Acrobat XI).
My printer is an Epson 3880.
I can print ok using my paper profiles when I'm printing from Photoshop; the paper profils show up in the printer box,
and I can choose from my different paper profiles, some of which I've installed recently, non-Epson papers.
But those paper profiles don't show up in the menu when I print from Acrobat…
Any hints why I can't reach those?
Thanks in advance for any help,
Keth.

Are you talking about the color profiles? If so then:
1. Go to File>Print
2. Click the Advanced button
3. Select Color Management from the window pane
4. Select the Color Profile from the Color Profile pop-up menu

Color cast when printing from Lightroom with Epson 3880 printer

Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast.
WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync.
I used to have an espon 2400 which worked just fine.
I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
I need help!

Are you using moab icc profiles or are you using one of the epson profiles?
I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
Hope so
Tom

Terrible red color cast when printing from aperture

I have printed the same image from Iphoto as well as a windows machine and got very nice prints on my Epson R2880. However, every time i print from Aperture it comes out with a terrible red cast. I have tried the system managed colorsync profile as well as the generic one. (FWIW, B&W prints from Aperture on the R2880 come out very nice)
Any other ideas?

You may find it helpful.
Thanks, but if you look in the archives of the Apple ColorSync Users List, you'll find thousands of posts from his Mac dating back to the beginning of the List.
The principle is that you configure your device colour spaces to the largest gamut of which they are capable, calibrate them to a stable condition, characterise that condition in a measured test chart, and build ICC device profiles for those characterisations in your ICC profiling package of choice.
You then capture and correct colour with correct colour previews, resulting in normalised exposures in an ideal CIE colour space. With you normalised exposures, you convert into output condition 1, output condition 2, output condition n which is what repurposing is about.
But you do no apply a gamma change on top of the colour managed rendering. That is incorrect by definition. You apply your gamma change as part of the colour correction in order to get your normalised exposure.
If you imagine this in a prepress process, then you can forget the concept of determinate rendering which is the bedrock of the ICC architecture. If you as photographer do a gamma correction on top of your presentation print or proof print, then you can claim that you have a presentation print, but you cannot contractually claim that you have a proof print as your proof print is a colour correction on top of the colour management system. If Apple Aperture allows the user access to colour correction on top of colour management, then that is a bug in the application. Sorry ...
/hh

Colors off when printing on Epson printer from Indesign

I'm new to Indesign. I'm a photographer trying to print a booklet for a handmade book.
My question is about preparing photographic images for use in Indesign.
I have JPEGS, saved as RGB files at 300DPI. I'm printing on an Epson R2000 using a custom paper and custom ICC profile. In my Color Management dialog I have Let Indesign handle colors and the correct printer profile selected. Output color is Composite RGB. The colors are really off so obviously I'm doing something wrong. I'm no expert so any advice much appreciated!

Hi - I disabled the custom profile for my Moab paper and whilst the green hue is gone, the colors are dull. My question is should I save my images in Photoshop to CMYK? As opposed to RGB?
Should I change the color profile assigned to Indesign to Adobe RGB? This was the original color profile of the image in Photoshop.

When printing from iPhoto picture is printing on the top corner with just 1/4 of the total photo

Can anyone point me to the settings that control printing final output? My photos are coming out cropped to the upper corner with only the first corner of the photo printing. All other printable programs turn out as they should. No printer issues; photos from card to pribnter print as they should.

Because you are printing a different size than the image - you give no details so one can only provide generalities
If you have an image that is 4:3 in dimensions and print it as an 8x10 image something has to give - it is the top or side of the image
Crop to the dimensions of the print - and you will lose nothing
LN

Color off when printing from iPhoto if photo was scanned in.

Similar Messages

Maybe you are looking for