Color picker does not work, " program error when I click, photoshop cc

I am user of photoshiop cc and it worked fine until several days ago but suddenly it shows " program error " when I click color picker, and I can not use changing color. Please help me to resolve this issue.

There was a bug with photoshop CC concerning the color picker and its swatches. Make sure you have the latest version and then if it still exists, reset your tools in the upper left hand corner which would be the very first icon in the top tool bar. That should fix it. If not let us know and maybe someone can think of something else.

Similar Messages

Premiere Pro CS5 - Mac Pro - The eye dropper color picker does not work properly

The eye dropper will not pick up on the colors that are hovered over. Instead, the selected color is offset. The best I can figure out is that I'm experiencing a vertical downward offset of about +/-150 pixels and a horizontal offset to the right of about +/-5 pixels.
Does anyone have the same issue and if so have you found a solution?

Yes, that appears to be the problem. I disconnected my secondary monitor (which does have a different vertical resolution) and the eyedropper appears to function properly.
Okay, so now I know the cause of the issue. However, disconnecting and reconnecting monitors is not an acceptable workflow. Apparently this problem affects quite a few Premiere Pro CS5 Mac users with dual monitors since you referred to it as a know issue with all versions of Mac OS. Do you know if there is an update (not an upgrade) for Premiere Pro CS5 to address this?
Thanks.

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

My Creative Cloud does not work anymore. When I try to reinstall it I receive the message "AAM cannot initialise". I have tried all the instructions but it still does not work. Robert

Try perform below steps.
Open task manager by pressing Ctrl + Shift + Esc keys. Click on more details if the option available.
Then end all Adobe related processes, including Creative Cloud and Coresync ( if running )
Then hold windows key on your keyboard and Press R key.
It will open Run window
In Run window, type Appdata and click on Ok
Open Local > Adobe folders
Delete AAMUpdater and OOBE folders
Then navigate to C:\Program Files (x86)\Common Files\Adobe
Delete Adobe Application Manager and OOBE folders
Go back to Program Files (x86) and Open Adobe folder
Try deleting Adobe Creative Cloud folder, if it is not allowing rename it to Adobe Creative Cloudold
Download and install Creative Cloud App from below link
https://creative.adobe.com/products/download/creative-cloud
Then check

Color Highlights does not work for chart

When I set the color coding in the chart, it works fine if I run the crystal report on the same DB that I use to design the report.
Problem occurs if I run the report on another DB. Color Highlights does not work in that case.
I am using JRC to run the reports.
Thanks & Regards,
Amrita

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

HELP!
Itunes is not working on my mac. I'm trying to redeem a gift card and everytime I enter my password it does not work. Also, when I try and browse songs, everything is blank

It's been a while but it should work on a Mac because Macs can read Windows formatted devices. Otherwise, you can perform a restore operation to return it to the Mac format. If you go to support.apple.com/manuals/ you can find a copy of the user manual for the model you have in which this is all explained.

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

My iphone does not always turn on when i click the home button or start button? Happened after ios7.5 update. Any suggestions? Phone is brand new

my iphone does not always turn on when i click the home button or start button? takes a few clicks and then it goes on. Happened after ios7.5 update. Any suggestions? Phone is brand new

Ok i did what you said to and it did it again, I am at work. Phone is on my desk. I clicked the home button to see if I had missed any messages and it would not turn on.
Starnge thing is this happened to my other 5S. Took it to apple. They replaced it, Now this phone is doing the same thing, Could it be the software?
Do you have another suggestion for me?
Your help is appreciated .

There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

# Question
there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
..

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

"Pick a Color" tool does not work

Since upgrading to OSX Yosemite the "Pick a Color" tool for color fills/matches in Microsoft Word for Mac does not match the color picked.

Hi Jehanzeb,
In chart expert there is a tab "Color Highlightsu201D. In this tab one can specify the condition based coloring.
In my case I want to show "RED" color for Unauthorized events andu201D GREEN" color for Authorized Events.
While creating a report suppose I am using a database server "DB-A".I set the color highlights in the chart as I explained. Please be noted that when we click on the color highlights tab it asks for the database login.
To view the report we have our own server and we are using JRC APIs.
Hence I map my report with server and try to view the Report. My Server is connected with database "DB-B" which is different from the database I used to create the report.
This time color Highlight I have specified while creating the report does not work.
I have tried using the "Format Series Riser" option. But the problem with this is that, it does not color the chart conditionally.
I mean if I give GREEN for Authorized and RED for Unauthorized. It gives the green color either to Authorized or Unauthorized which so ever occur first in the chart.
For example:-suppose there is no Authorized Event on date 15-Jan-2009 and I select the date range starting from 15-Jan.In this case Unauthorized event is the first to print on the chart hence this event get the green color though I expect this events to be in RED color.
Regards,
Amrita

Concatenating a string in a URL syntax does not work (syntax error)

I am trying to print a Report in PDF format. The code is:
select '<a href="http://oasdev.oh.gov./reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
GLOBAL_URL should carry the value ( a sring) ----> http://oasdev.oh.gov.
Therefore I changed it to the following code:
select '<a href="GLOBAL_URL/reports/rwservlet?GDMS_ACR&Y='||:P106_YEAR||'&B='||:P100_BUSINESS_UNIT_ID||'&C='||:P106_COMMISSION_ID||'&d=('||TO_CHAR(SYSDATE,'MMDDYYYYhhMISS')||')", target=_new> Print PDF Version of the report </a>' url from dual
But it does not work. Any suggestion would be highly appreciated.
Thanks in advance.
Gouri
Edited by: user1046395 on Dec 8, 2010 8:41 AM

When you do a select, you need to select into a variable..
select ' Print PDF Version of the report ' url INTO <Variable>from dual
Are you trying to run an Oracle Report from APEX??
If so look at this thread: Using popupURL to call Oracle Reports - Problem passing parameters
Thank you,
Tony Miller
Webster, TX
When you have enough clowns, you have a circus.

Color Picker Sliders not working ?

I'm using Dreamweaver CS6 and every time I try to pick a color using the Color Picker Sliders, it doesn't save it, have any of you encountered this issue ? Is there a way to fix this ?
Thanks!

I get the same issue, most of the time it seems to work, but last night I selected a CSS style by double clicking it, I needed to make the background colour lighter so I selected System Color Picker and then chose Color Sliders followed by HSB Sliders.
Adjusted sliders to required colour, clicked OK and... nothing... The colour selected did not change in the selector box.
Selecting default colour, transparent or a colour from the main colour picker works. But using the Color picker Sliders does not work at all.
Anyone know of a fix for this?
I ended up screen capturing the colour, loading into Fireworks and sampling the colour, Have now added digital color meter so I can use this while I await a fix.
I am running Mac OSX Snow Leopard on an iMac, will try later on my MBP

Deleting cookies, either one at a time or all, does not work; they reappear when I go back to view them. This is a critical privacy problem!

Removing cookies does not work, either one at a time, or remove all. I tried from history and from the options screen. They appear to go away but when I go back in they are all back again. This is happening in the latest version that was automatically updated.'''bold text'''

Do you have an extension like TACO (Abine) or TrackerBlock that maintains a set of OPT-OUT cookies?
* Targeted Advertising Cookie Opt-Out (TACO): https://addons.mozilla.org/firefox/addon/targeted-advertising-cookie-op/
* TrackerBlock: https://addons.mozilla.org/firefox/addon/trackerblock/
* Beef Taco (Targeted Advertising Cookie Opt-Out): https://addons.mozilla.org/firefox/addon/beef-taco-targeted-advertising/
In that case you need to remove such an extension to get rid of those cookies.

Silverlight 5 binding on a property with logic in its setter does not work as expected when debug is attached

My problem is pretty easy to reproduce.
I created a project from scratch with a view model.
As you can see in the setter of "Age" property I have a simple logic.
public class MainViewModel : INotifyPropertyChanged
public event PropertyChangedEventHandler PropertyChanged;
private int age;
public int Age
get
return age;
set
/*Age has to be over 18* - a simple condition in the setter*/
age = value;
if(age <= 18)
age = 18;
OnPropertyChanged("Age");
public MainViewModel(int age)
this.Age = age;
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
In the MainPage.xaml
<Grid x:Name="LayoutRoot" Background="White">
<TextBox
Text="{Binding Path=Age, Mode=TwoWay}"
HorizontalAlignment="Left"
Width="100"
Height="25"/>
<TextBlock
Text="{Binding Path=Age, Mode=OneWay}"
HorizontalAlignment="Right"
Width="100"
Height="25"/>
</Grid>
And MainPage.xaml.cs I simply instantiate the view model and set it as a DataContext.
public partial class MainPage : UserControl
private MainViewModel mvm;
public MainPage()
InitializeComponent();
mvm = new MainViewModel(20);
this.DataContext = mvm;
I expect that this code will limit set the Age to 18 if the value entered in the TextBox is lower than 18.
Scenario: Insert into TextBox the value "5" and press tab (for the binding the take effect, TextBox needs to lose the focus)
Case 1: Debugger is attached =>
TextBox value will be "5" and TextBlock value will be "18" as expected. - WRONG
Case 2: Debugger is NOT attached =>
TextBox value will be "18" and TextBlock value will be "18" - CORRECT
It seems that when debugger is attached the binding does not work as expected on the object that triggered the update of the property value. This happens only if the property to which we are binding has some logic into the setter or getter.
Has something changed in SL5 and logic in setters is not allowed anymore?
Configuration:
VisualStudio 2010 SP1
SL 5 Tools 5.1.30214.0
SL5 sdk 5.0.61118.0
IE 10
Thanks!

Inputting the value and changing it straight away is relatively rare.
Very few people are now using Silverlight because it's kind of deprecated...
This is why nobody has reported this.
I certainly never noticed this problem and I have a number of live Silverlight systems out there.
Some of which are huge.
If you want a "fix":
private void OnPropertyChanged(string propertyName)
if (this.PropertyChanged != null)
//PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
Storyboard sb = new Storyboard();
sb.Duration = new Duration(new TimeSpan(0, 0, 0, 0, 100));
sb.Completed += delegate
PropertyChanged(this, new PropertyChangedEventArgs(propertyName));
sb.Begin();
The fact this works is interesting because (I think ) it means the textbox can't be updated at the point the propertychanged is raised.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Color picker does not work, " program error when I click, photoshop cc

Similar Messages

Maybe you are looking for