Color picker on Illustrator CC 2014 shows wrong values

See the image above . The selected area filled color is e6e6e6 ( 230, 230, 230 ) but the color picker shows the wrong value 4d4d4d. Its happens only on Illustrator , What is this actually is there any problem with the color mode settings ? Please help me

You misunderstand me, so don’t be too quick to judge.
I said that the Color panel was more efficient than the Color Picker. It has sliders so that you can adjust colours precisely as you wish first time, rather than just groping somewhere on a big area of colour in the Picker and then having to make fine numerical adjustments afterwards (plus an OK when you’re done).
The Color panel is particularly useful when you are working in CMYK because it ensures that you get clean mixtures when you want them (which the Picker does not, without fine tweaking afterwards).
And if you want to get shades of the same colour, you simply hold down Shift as you drag one of the sliders.
In conjunction with the Swatches panel, I would go for the Color panel any time, but if you prefer the Picker that’s quite all right by me.

Similar Messages

Only use HSB Color Picker in Illustrator?

I only want to use the HSB Color Picker in Illustrator. Yet it always shows the RGB Color Picker by default. Is there a way to change this behavior?
I'm using CS6.
Thanks!

Note that HSB values are hopelessly unstable.
See: http://forums.adobe.com/message/3336750#3336750 and http://forums.adobe.com/message/5253330#5253330
You can expect trouble. You have been warned :-)

Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

Is there a way to permanently save color libraries in Illustrator CC 2014 so that every time you launch the software, the colors appear in Swatch palette?

Modify the New Document Profile you use the most to reflect what you want it to contain or just make a new document with all the stuff and save it with a distinct name to the New Document Profiles folder in your user profile.

Default color palette in illustrator cc 2014

How and where can I save a custom default color palette in Illustrator cc 2014 ?
I'd figured it out for cc, but it overwrote my palettes when I upgraded, and now I can't seem to find the solution. .ase files don't seem to be recognized by 2014, either.
Thanks!

Oh no, wait sorry. False alarm.
I don't have those options in my advanced options when I create a new AI doc. (see attached)
Clicking the "profile [custom]" dropdown only gives me the option to select presets such as "Web" and "Print" and "Basic RGB", but no option to create my own.

Issue: - FBL1N - is showing wrong values

Issue: - FBL1N - is showing wrong values
Hi SAP experts,
We are executing T Code FBL1N and selecting all open enteries, and select all items like special normal items, G/L Transaction, noted items, parked items and customer items, we found that the balance is showing wrong for intercompany vendors.
For Ex, if vendor is not created in company Code A and customer items are available in Company Code A then that items are coming for some line items and for some line items it is not?
I have attached one example for the same. for all vendors data is coming properly but for indivisual vendor is it not.
Please suggest why?
Regards,
Vijay

Example :
Vendor number 99 ans for the same customer nO is C12 is created in company code ABC but vendor is not created and customer C12 is in PQR, now i am executing fbl1n for Company Code PQR for open item selecting all options like normal items, special G/L transaction, customer items noted items and parked items, the line items related to Vendor number 99 for company Code PQR should not display, as vendor is not created but customer items are there, please let me know for some cases it is showing result and in same cases it is not why?
Regards,
Vijay

My color picker in Illustrator 18.1.0 is broken. It is a solid red bar instead of showing all of the colors. Any ideas?

Color picker bar on illustrator cc is broken. It is a solid red block instead of showing all of the colors.

Falcon Design,
It seems that the issue is caused by a corrupt folder called en_US or similar (depending on language) within the Adobe Illustrator 18 Settings folder, see post #7 by Jules in this thread,
https://forums.adobe.com/thread/1595766
so the solution should be to move or rename that folder (or the whole Adobe Illustrator 18 Settings folder).
You can find the folder in Move the folder (follow the link with that name) with Illy closed.
As a temporary roundabout way, you can select the lower rectangle to the right of the rainbow and DoubleClick to apply that to change the top rectangle and the values: the lower colour is the right one.

Problem Lab color mode in Illustrator CC 2014

What is the best way to choose a CMYK color mode in Illustrator? When I want to import a file from Illustrator to InDesign it will automatically be converted to a Lab color mode and I can not change the CMYK values. All colors from Illustrator are therefore in a Lab color mode. I work with Illustrator CC 2014, thank you very much!

Thank you I think I understand what you mean. I added a Illustrator and Indesign picture to show you what happens. I made a file in Illustrator with the right values and saved it as a eps file. Then I imported in to Indesign and the second picture shows what happens. I never had this problem but since the new CC version I can't change it.

Color Picker in Dreamweaver CC 2014 - Hex field greyed out

The input color field in Dreamweaver CC 2014 is greyed out. Cannot seem to
insert a hex code.

If I have opened the colour picker, the natural assumption is that I want to edit the colour. I should be able to do that using all of the tools, not just the sliders. If I open the colour picker in Photoshop, both the value fields and the sliders are available. Why should Dreamweaver work differently?
Sure David, if you open the color picker in the CSS Designer the value field is available for typing/editing.
But the thing with color picker in Code View is that we can have the cursor focus only one place at a time.
Notice that while the color picker is up in Code View, you can still type in whatever color values in your code, while the picker shows you the exact color.
Hope that helps !
Subhadeep

Illustrator CC 2014: show exact linked image transform?

In Illustrator CS6 and previous the link information for a placed image would show the transform details in, well, detail. In the latest version it now only shows a rounded number which is worthless for me. The scaling never shows a scale after the decimal and the rotation only a single rounded decimal.
Example image:
Illustrator CS5: Scale (H,V): (131.641%, 131.641%, Rotate: -1.459º
Illustrator CC 2014: Scale (H,V): (132%, 132%, Rotate: -1.5º
Is there another way to show the detailed scale/rotation of an image?

That's a good idea. Unfortunately, same problem if I move the image to desktop or same folder as file.
If I resave the file (JPG in this case) the error disappears.
I understand this can be the solution, but given this issue had not happened before, it's interesting it is happening with CC 2014.
Attached is the image in question. Note that this is not the only image. It has happened with older design files that were made from older versions of cc or before cc.
I'm not sure if the uploader will recreate the JPG so I'll compress the file and is available here if anyone would like to test.
Dropbox - photo 2.JPG.zip

Updated CODE1 is showing wrong values in 2LIS_05_QE1

Hi all,
I'm using 2LIS_05_QE1 extractor to report over qualitative data in BW. When the code of the characteristics is updated, the extractor takes 2 records, before and after images. The extractor is gathering wrong values for the CODE1 field in the before image.
REQUEST     DATAPAKID     RECORD     ROCANCEL     PPLNKN     MERKNR     CODE1     GRUPPE1     ZHLNSTAT
REQU_4KVR0APSV0RSZ7N70IOR0F95L     1     5120          5     40     0     CIBAU038     1
REQU_4KPIA4UG5G1IKN6DE3XFWKIS9             3     4045     X     5     40     0     CIBAU038     -1
REQU_4KPIA4UG5G1IKN6DE3XFWKIS9             3     4046          5     40     75     CIBAU038     1
REQU_4KYF8YNIEMXNZI7P2Y5BM21W9     3     4045     X     5     40     0     CIBAU038     -1
REQU_4KYF8YNIEMXNZI7P2Y5BM21W9     3     4046          5     40     75     CIBAU038     1
We have changed the characteristic two times, now we can see two of the before images with the ROCANCEL field marked with = 'X'. The problem appears in the second before image which is not taking the actual value of the CODE1 field (75), instead is showing the value in zero. Then, when I report over the key figure in the table above ZHLNSTAT (quantity of values) the results are showing 2 values for CODE1=75 and -1 values for CODE1=0.
Any ideas?

I have checked Datasource and CODE1 is not a hidden field...apart from this field there are other fields too which I can see in Datasource in R/3 about dont see them in BW ....
Please let me know what could be wrong.
Thanks,
Murtuza.
Edited by: Murtuza Morwala on Jun 27, 2009 7:36 AM

Saptranshost profile parameter showing wrong value

Hi Expert,
We are using EHP6 with sybase database on windows platform
We get stuck while configuring stms.
After working more on same issue we found that "DIR_TRANS" parameter showing wrong path in AL11 tx.
"DIR_TRANS = \stats\sapmnt\trans"
The correct value should "DIR_TRANS = \sapprd\sapmnt\trans"
(Wrong host name showing in path as "stats" where it should be "sapprd" )
After changing the value in profile parameter "SAPTRANSHOST" from RZ10 tx as "SAPPRD" issue get resolved.
When I checked profile parameter "SAPTRANSHOST" from RZ10 in production system, its showing me following value:
>>Unsubstituted standard value: STATS
>>Substituted standard value: STATS
Same I checked in Development system and showing as below:
>>Unsubstituted standard value: $(SAPGLOBALHOST)
>>Substituted standard value: SAPDEV
My question is why "SAPTRANSHOST" profile parameter showing "Unsubstitued standard value" as "STATS" where is should be "$(SAPGLOBALHOST)"
Sap not allowed to change the same. Only allowed "Parameter Val" in RZ10 tx.
How to change "stats" as "$(SAPGLOBALHOST)" and what can be possible reason as value showing stats.
Regards.
Dev

HI

Standard program showing wrong values in ALV report

Hi All,
Standard Report 'RFBILA00' (Balance sheet P+L Statement) ,when i excute for classical list the output showing correct.
But with the same test data when i run for ALV Grid control showing wrong valuse like.
with same company code comparision year,comparision period ,comp periods...when i run classical list:
PROFIT/LOSS BEFORE TAXATION                                 5,194,871.12-
RETAINED PROFIT/LOSS FOR THE PERIOD                    5,194,871.12-
NET PROFIT/(LOSS)                                                        5,194,871.12.
when i run in ALV for same above data, the result is:
PROFIT/LOSS BEFORE TAXATION                           9,307,137.09
RETAINED PROFIT/LOSS FOR THE PERIOD              5,194,871.12-
NET PROFIT/(LOSS)                                                 22,076,715.82.
Please help on this....and this is standard report.. y its showing different for same data.
Thank you
Anu.

Hi ,
Same program excuted once by selecting classical list is showing correct. And with same data excuted with ALV grid list showing wrong valuse.
when selected with Classical list: for company code:8000,Reporting periods: 1-9,Reporting year:2009,Comparison periods:1-8
Comparison year-2009.
PROFIT/LOSS BEFORE TAXATION 5,194,871.12-
RETAINED PROFIT/LOSS FOR THE PERIOD 5,194,871.12-
NET PROFIT/(LOSS) 5,194,871.12.
when i run in ALV for same above data, the result is: for company code:8000,Reporting periods: 1-9,Reporting year:2009,Comparison periods:1-8 Comparison year-2009.
PROFIT/LOSS BEFORE TAXATION 9,307,137.09
RETAINED PROFIT/LOSS FOR THE PERIOD 5,194,871.12-
NET PROFIT/(LOSS) 22,076,715.82.
Thank You,
Anu.

After casting double to float debugger shows wrong value

Hi,
My colleaque found an interesting behaviour with Java debugger. I have made some tests and here are the results:
Test code:
double dNum = 43.680659;
float fNum = (float) dNum;
System.out.println("double number = " + dNum);
System.out.println("float number = " + fNum);This is tested in Eclipse IDE 3.4.2 with following Java JRE versions:
- 1.4.2_19
- 1.5.0_14
- 1.6.0_10
And following JDK:
- jdk1.5.0_16
Eclipse IDE will show following values for variables in all platforms:
dNum = 43.680659
fNum = 43.74316Console will print:
double number = 43.680659
float number = 43.68066Testing also with command line debugger jdb. Java JRE version:
- 1.4.2_19
And following JDK:
- jdk1.5.0_16
Results are the same as in Eclipse IDE. Is there a bug in debugger environment?

I managed to find bug report of this issue:
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6807341
Information:
Bug ID : 6807341
Synopsis : JDWP: float value reported incorrectly
Category : java:debugger
State : 3-Accepted, bug
Priority : 4-Low
Submit Date: 19-FEB-2009

DatePicker shows wrong value on initial loading

I have a column with a date picker, to make the content of the column editable.
oCdColumn = new sap.ui.table.Column({
            label: "Übergabe",
            template: new sap.ui.commons.DatePicker({
                value: {
                    path: "CD",
                    formatter: function (sDate) {
                        var date = new Date(parseInt(sDate));
                        console.log(date)
                        return date;
                locale: "de",
                change: [oController.onDateFieldChange, oController]
            sortProperty: "CD"
The value I get from the path CD is in the format you get when you call .getTime() on a Date.
On initial loading the datepicker displays some dates that are like 6 years after the date that should be displayed. When i navigate to another table page/ change the sort order and then navigate back/change the order to initial value the date is displayed correctly.
How is this possible?

Hi Frank,
as you can see I logged the Formatter Output. It never showed me an incorrect date. I think parseInt of null returns NaN. When NaN was the Output of theFormatter the DatePicker showed the current Date.
I stepped through and for the first 5 lines (which is the default value for a table page) it put a correct Date in the table, the other values i can't see because the table page was full, but the console showed a correct date. After it finished running through all the formatters the
visibleRowCountMode: sap.ui.table.VisibleRowCountMode.Auto
was triggered and the dates were wrong.
Thanks for the link with the type system. I tried it yesterday, but it gave me an undefined is not a function error. My mistake was that i just set the pattern and not the source pattern. When I set the source pattern to "timestamp" it worked. Thank you.
For anyone who runs in the same problem: i would also recommend this link: sap.ui.model.Date
Regards,
Judith

F.19 report showing wrong values (GR/IR)

Hello,
At my company, they run the MR11 to check for GR/IR variances and then clear these variances using the F.13 transaction. However, when the F.19 transaction is run to analyze the GR/IR clearing account, there are some old PO's belonging to year 2005/2006 that still show up in the report. When these PO's are checked, there is no GR/IR variance.
Could someone please explain the reason for this and if there is any way to remove these entries from the F.19 report?
Thanks in advance,
Rugmani.

Hi,
This is the wrong forum for this
Rgds,
Richard

Color picker on Illustrator CC 2014 shows wrong values

Similar Messages

Maybe you are looking for