Color picker reversed rainbow with color shades

my color picker has changed and i cannot figure out how to revert it back to normal. it normally has a single color with ranges from white in the upper left corner to black in the lower right corner. it is now showing the color ranges from light to dark in the narrower slider bar which used to show all of the range of colors. it's as if the two slider areas reversed and now the rainbow is in the larger box. i don't know what caused this to change but i do not know how to fix it. please help. i am using windows 7 and have the latest updates from adobe.

By normal, you probably want to click on the H (hue) radio button.
MTSTUNER

Similar Messages

  • Color/ shade difference

    I'm having a bit of a problem. It seems that I can't view certain colors/ shades of colors. How do I adjust this? I know the colors are there because I can see these shades when I'm on a different user my computer, but my user can't view it. I guess I adjusted it unknowingly. And I know it's not the light, because I've tried changing it but I still can't view the colors... Can I reset it somehow to it's original settings? If so, how?
    *I've already tried adjusting the display and color as well as the F1 and F2 buttons. I know it's not these because without changing them I switch to a different user and the shadings are different.

    Hi Angel,
    When you say you've tried adjusting the color, do you mean that you've gone to system preferences > Displays > Color and selected a different color profile? Check to see which profile is being used on the account that works correctly and make sure the same one is set on your other account.
    Secondly, in System Preferences > Displays, make sure that your monitor is set to "millions" of colors. This is usually what people check. They often miss the color profile step described above.
    Thirdly, go to System Preferences > Universal Access and make sure that the "Enhance Contrast" slider is set all the way to the left (normal).
    If none of that works, it's likely that one of your preference files has been corrupted. Reply here and we'll walk you through deleting it.

  • Color/ shade adjustment

    I'm having a bit of a problem. It seems that I can't view certain colors/ shades of colors. How do I adjust this? I know the colors are there because I can see these shades when I'm on a different user my computer, but my user can't view it. I guess I adjusted it unknowingly. And I know it's not the light, because I've tried changing it but I still can't view the colors... Can I reset it somehow to it's original settings? If so, how?

    If you select System Preferences>Displays. Set the Resolution to 1280x800
    and the Colors to Millions. Click Colors and select Color LCD. See if that works.

  • Click+Hold a Color Swatch : Color-Shades float

    I will use this image below just for an example.
    I remember being able to click on a color and hold it for about two seconds and then a series of color-shades from the clicked-color will float on the side.
    But now I can't seem to do it anymore. I've tried different Color Swatches, but it still doesn't work. Please help.

    Thank you Mylenium for responding.
    Not exactly confusing the two programs, I'm aware that it's Illustrator Swatch, but I was confusing two different vendors altogether. What I was talking about was Corel Photopaint. Corel has that feature, and I suppose Ps doesn't have that. I realized this when I open CPp again.
    Thank you.

  • IIS Reverse Proxy with URL rewrite.

    Hi all, hoping to leverage the wealth of knowledge contained here.
    Any assistance would be very welcome.
    I'm having an issue getting a reverse proxy and URL rewrite working in IIS 7.0.
    I need to redirect all requests with a specific virtual directory suffix only.
    ie; https://domain.test.com/outbound/Content/query_etc
    With /Outbound/ being the trigger.
    This should be redirected to http://10.10.10.10/inbound/Content/query_etc
    While at the same time, requests without the /outbound/ suffix should be handled locally.
    I have configured the reverse proxy as described in a few articles, and have had no luck.
    Here's a snippet from my (sanitized) web.config at the site level.
    <rewrite>
    <outboundRules>
    <rule name="ReverseProxyOutboundRule1" preCondition="ResponseIsHtml1">
    <match filterByTags="A" pattern="^http(s)?://10.10.10.10/inbound/(.*)" />
    <action type="Rewrite" value="https://domain.test.com/outbound/{R:2}" />
    </rule>
    <preConditions>
    <preCondition name="ResponseIsHtml1">
    <add input="{RESPONSE_CONTENT_TYPE}" pattern="^text/html" />
    </preCondition>
    </preConditions>
    </outboundRules>
    <rules>
    <rule name="ReverseProxyInboundRule1" stopProcessing="true">
    <match url="^outbound/(.*)" />
    <action type="Rewrite" url="http://10.10.10.10/inbound/{R:1}" appendQueryString="true" logRewrittenUrl="false" />
    </rule>
    </rules>
    </rewrite>
    To me, this looks correct, yet it doesn't work.
    With this, I get the normal 404 - Error Code 0x80070002, with the text indicating the local directory doesn't exist, so.... not being picked up by the filter for redirection.

    Hi Andrew,
    Looking at your requirements it appears you need Reverse Proxy To Another Site/Server.
    By using URL Rewrite Module together with
    Application Request Routing module you can have IIS 7 act as a
    reverse proxy.
    It seems like URL Rewrite can't re-route the request somewhere else out of the server.
    Even when you rewrite the url the actual connection remains with the server. Hence if your original server doesn't have /inbound/Content/query_etc  it will fail with 404.
    Hosting multiple domain names under a single account using URL Rewrite.
    It’s a common desire to have a single IIS website that handles multiple sites with different domain names.
    References:
    How to create a url alias using IIS URL Rewrite:
    http://blogs.technet.com/b/mspfe/archive/2013/11/27/how-to-create-a-url-alias-using-iis-url-rewrite.aspx
    Reverse Proxy with URL Rewrite v2 and Application Request Routing:
    http://www.iis.net/learn/extensions/url-rewrite-module/reverse-proxy-with-url-rewrite-v2-and-application-request-routing
    Regards,
    Satyajit
    Please“Vote As Helpful”
    if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Another tax determination code being picked up along with right tax determination code during creation of BBP

    Hi Experts,
    There is an issue I am facing while creating BBP, the slices in table DFKKMOP are having another tax determination code being picked up along with the right tax detemination code.
    E.g. -> In EK02 for the BBP I have configured tax determination code ZA for main 0051 and sub 0050 for all the company codes, but it is also picking ZX  which I have configured for main 100 - sub 202,203 , main - 200 sub 202,203 , main 300- sub 202,203.
    Strangely In the table DFKKMOP the tax determination code ZX is coming in the line which has main 0051 and sub 0050.
    I dont understand why ZX is being shown in the field BB grouping - Budget Billing: Grouping Key for Tax Determination Code.
    I have double checked the customizing in EK02 and I dont find this tax determination code being defined for main 0051/sub 0050, then why is it being picked up for BBP line item in table DFKKMOP.
    Any suggestions are appreciated.

    Well the issue was during creation of BBP items in DFKKMOP the VAT corresponding to Main/Sub 100/ 3xx was being picked up and when I adapted the tax determination code there. The items was created without any split.
    For the second one PA issue, well in this case the tax determination in the standard during the creation of PA invoice via EA27 is happening on the date of execution and not on the selection date or posting date. This is because in SPRO the config. of invoicing <<Define Basic Settings for Invoicing>>
    has <<Date type for tax determination in Invoicing for Part. Bills.>> set to <<tax determination in invoicing based on entry date>> that is why it takes the execution date into  consideration.So even when we do a posting for SOLLDAT in future to take another tax code it doesnt take that SOLLDAT instead takes todays execution date for which the new tax code is not valid.
    To overcome this issue either we need to make the new tax code valid from date in past ie. before the date of execution or we need to change this parameter in customizing <<Define Basic Settings for Invoicing>> to <<tax determination in invoicing based on Posting date>>.
    Voilà!

  • When downloading updates from iTunes to my iPhone my playlists appear in reverse order with least played at the top. I just want the playlist to appear in the same order as my iTunes library. This seems to have changed after downloading iCloud

    When dowloading updates from my iTunes library onto my iPhone
    my playlists appear in reverse order with the least played at the top of the list
    and most played at the end on the playlist.
    Therefore I cant play my favourites in the order that I like to hear them.
    This all changed when I recently downloaded the iCloud application.

    Hi Jim,
    Is this temporary cache accessing my data when I play songs from it? As I mentioned in my previous post, I'm still able to listen to these songs even when my phone is in airplane mode and the download icon is still present next to said songs. This implies that the songs are already downloaded onto my phone even if I didn't opt to download them directly from the cloud -- they're on my phone because my phone was shuffling my library on a wifi network.
    Dan

  • Create reversal document with BAPI: BAPI_ACC_DOCUMENT_POST.

    Hi Guys,
    I am Create reversal document with BAPI: BAPI_ACC_DOCUMENT_POST.First I am post financial document with BAPI BAPI_ACC_DOCUMENT_POST and Same Document. i am Reversal  with same BAPI 'BAPI_ACC_DOCUMENT_POST'.
    New reversal docment is created. but posting key are not changingin reversal docment.whatever posting key created in posting same posting key are created while reversal also.Please help me

    check
    Mapping of POSTING KEY in BAPI_ACC_DOCUMENT_POST

  • Problem with Reversed document with IDOC interface

    I have a problem when I create Idoc which will reverse a document.
    I use ACC_DOCUMENT_REVERSE, in Idoc is filled like this -
    OBJ_TYPE ( BKPFF )
    OBJ_KEY( reverse document number + company code + year)
    OBJ_SYS ( system id )
    OBJ_KEY_R ( obj_key of document which will reverse )
    PSTNG_DATE
    COMP_CODE
    REASON_REV
    I formed OBJ_KEY with one select from table bkpf, and get the last number of documents reversed with Idoc interface. The interface creates Idoc reverse document with number 929xxxxxxx. With fb08 - documents created are 92xxxxxxxx.
    The problem is when use transaction fs10n, fill customer account number, and the sums are not right. The documents which was reversed with Idoc did not entered in G/L Account Line Item.
    But if I start transaction fbl5n - customer line item, the documents reversed by Idoc is there, and the total sum is right.
    How can I resolve this problem?
    Greetings,
    Lazar Hristov

    Hi,
    I hope you have reversed the posting.Have you cancelled the downpayment invoice.
    Please cancel the first downpayment invoice and post the amount for the second downpayment.
    Now try to create the final invoice.
    Regards,
    Krishna.

  • Apache Reverse Proxy with Abap Web query

    Hi to all
      We are trying to configure apache 2 to work as a reverse proxy with web abap Netweaver installation.
    From inside the network the web query is fine.
    Running the query with the reverse proxy we have only the html code in the browser. All the scripts and css are not present.
    We checked some messages inside the forum and we have tried a lot of stuff without success.
    We use always linux (Fedora, Ubuntu with xampp or apache only) plus the html module or the publisher from http://apache.webthing.com.
    Our installation is like this the reverse proxy in the dmz and the netweaver to the inside off coarse, and we don't have the same domain name, i don't know if this is important.
    Any help/idea  is valuable.
    Thank you
    Yiannis

    Hi Olivier
    I have seen your solution in other messages but i didn't try it because i was trying to work with the html_proxy module.
    I read the documents you gave me plus some apache tutorials on the rewrite rule.
    In any case i have my installation working now.
    I did some extra changes in my config so now the rules are like that
    ProxyVia On
    ProxyBadHeader IsError
    ProxyRequests Off
    ProxyPreserveHost On
    ProxyPass /sap http://192.168.1.59:8001/sap
    ProxyPassReverse /sap http://192.168.1.59:8001/sap
    RewriteEngine On
    RewriteRule ^/(sap\(.*) http://192.168.1.59:8001/$1 [P,L]
    Thanks again for your help
    Yiannis

  • Can NOT cancel/Reverse GI with a date before the actual GI date

    Hi
    can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
    thanks

    >
    jo jo wrote:
    > Hi
    >
    > can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
    > thanks
    Hi Jo Jo,
    I am not sure if i understand your problem correctly.
    As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
    If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
    For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
    So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
    Hope it helps.
    Post furthur if i had misunderstood your problem.
    Regards
    Abhishek

  • Reverse engineering with Rational Rose

    Is anybody using the above?
    If so, have you developed any scripts to facilitate updating the Rose model,
    and which you'd be willing to share? Or perhaps discuss jointly writing
    same?
    Ideally, there would be an Fscript to facilitate exposting Forte projects,
    and a Rose script to facilitate import.
    TIA,
    Eric

    Eric,
    As part of tool evaluation for modeling, We evaluated Rational Rose 98i . We
    were able to import forte pex files into Rose model.
    We had no problems with reverse engineering but there were problems related to
    round trip engineering.
    Since Rational Rose 98i did not have a repository based solution for
    configuration management, it was quite a task to keep the model in sync with
    multiple users updating it. However, I believe you can use Microsoft Source
    safe for configuration management though we did not try this.
    Ramesh Timakondu
    PSI Data SYstems Ltd.
    One Bank Street, Ste. 406
    Stamford, CT, 06905
    (203) 359 3992
    tnkrampsidata.com
    "Fingerhut, Eric" <Eric.Fingerhuthbo.com> on 02/16/2000 04:26:59 PM
    To: "'kamranaminyahoo.com'" <kamranaminyahoo.com>
    cc: (bcc: Ramesh Timakondu/Consultant/NAC)
    Fax to:
    Subject: (forte-users) reverse engineering with Rational Rose
    Is anybody using the above?
    If so, have you developed any scripts to facilitate updating the Rose model,
    and which you'd be willing to share? Or perhaps discuss jointly writing
    same?
    Ideally, there would be an Fscript to facilitate exposting Forte projects,
    and a Rose script to facilitate import.
    TIA,
    Eric
    For the archives, go to: http://lists.xpedior.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

  • Partial picking and PGI (with Idoc)

    Hello
    a) We have a scenario where we would like to achieve partial picking and PGI with Idoc:
    For example
    In the delivery the delivery qty is 10 from the beginning, but we would like to pick only 7 and perform the PGI anyway. The 3 remaining units should remain open and create a new delivery with VL10 or whatever. For the picking confirmation we are using SHP_OBDLV_CONFIRM_DECENTRAL03. We are not using WM, just inventory management in this scenario.
    We know that per standard SAP functionality the picking quantity must match the delivery quantity when doing the PGI.
    b) However: we have another scenario where we run picking and confirmation from a DWMS, where all confirmations are made by the idoc type SHP_OBDLV_CONFIRM_DECENTRAL03. In this scenario, it is possible to achieve the partial picking and PGI.
    So my questions are really:
    1) Anyone knows why SHP_OBDLV_CONFIRM_DECENTRAL03 would post partial picking PGI with DWMS succesfully, and not with a "normal" scenario where there is no DWMS in use, just a normal plant/storage location?
    2) Anyone knows a suitable idoc type to achieve partial picking idoc, one where the picking qty and the delivery qty could be adjusted at the same time so that picked and delivery quantities would be exactly the same?
    3) Any suitable user exit that could be used in order to change the delivery qty according to what has been picked for the delivery? Some success stories around it would be appreciated.
    Thanks in advance,
    OT

    Hi,
    I am not able to get the details whether you want to know the information about the Inbound Idoc or Outbound Idoc. But you want to do the picking and packing of the delivery then I can presume that you are doing the Inbound process.
    In that case you can do use the process code SDPI which has the message type SDPICK. In this we have the function module SD_IDOC_INPUT_PICKING which can do the picking and PGI of delivery.
    In this you can also change the delivery quantity if you are not picking up the whole quantity from the plant. So it allows you to change the delivery quantity and then do the PGI for the same.
    Regards
    Suneet

  • 'Reverse Invoke' with XI

    Does anyone know how to do Reverse Invoke with XI, the way it used to be done with Business Connector. My client does not allow simple reverse proxies for inbound messages from external sources. Instead it require a reverse invoke ot be used between the DMZ and intenal integration server. Any info is greatly appriciated.
    Kind Regards,
    Chris

    Richard,
    We can use adapters is in the DMZ where many companies do not allow connections direct connections with the Internet and thay have demilitary zones
    if you want to use XI in such an enviroment you can either put another XI in the DMZ or just an J2SE adapter.
    PCK is also a De-Centralized Adapter engine.So when subsidiary companies want to communicate with the BIG company having XI..then this De-Central adapter
    engine communicates with it using XI message format. The conversion (File,JDBC,JMS,Mail)<-->XI Msg is done using the De-Central adapter engine of PCK. This is basically in B2B scenario
    Check this links which may help you:
    Re: B2B network infrastructure
    Re: Register Decentral J2EE Adapter Engine
    Hope this helps....
    ---Satish

  • My bookmark menu moves too fast when I try to pick a submenu with my mouse.

    My bookmark menu moves too fast when I try to pick a submenu with my mouse.
    When I am trying to surf to a website using my bookmark menu and
    navigating with my mouse, I click Bookmarks, then a main menu item, and then a submenu item. While moving my mouse from the main menu item to the submenu item, if I happen to stray off the main menu item briefly before I get to the submenu item, Firefox picks the wrong submenu item. I ran a utility program recently to "speedup" Firefox on the internet, but I did not want to speed up the menu operation. Please help me get the menu delay back.

    You can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    *Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

Maybe you are looking for

  • Mapping LDAP Groups to SAP Roles

    Hi there, i am trying to build up a synchron usermanagement with a LDAP-Server between EP, Web AS Java and Web AS ABAP. My thought is to administrate the users in the LDAP-Directory. The users will be assigned to groups. In EP and Web AS Java its no

  • RichTextBox Binding to a String or something else

    Hello. First, I'am from Germany and I have to learn english and this is the reason, why I wrote my question in english. My problem is: I want to bind a RTF to a String or something else, to work with the informations in behind code. But after I searc

  • How can I clean up my MAC from cookies

    How can I can I clean up my MAC from unwanted cookies. I thought MAC built in security is good.

  • JMS Message Export/Import XML on command line

    I need a command line (JAVA or WLST) to reproduce the Weblogic consol JMS message export and import to migrate manually message from a queue to another (online without filestore). There is an entry on the Weblogic console that export one or all messa

  • EPM System Configrator........

    Dear Friend, i have install Hyperion system 11.1.1.3 successful.But when i start the EPM system configrator it will show the following error: The system cannot find the path specified. "JAVA_HOME is not set" "Exiting" After that i'll set JAVA_HOME in