Color/Picture Error After import to LR4.4

After importing RAW FIles from my 5D3 into LR4.4 on my (fresh installed) win7 PC it looks like this:
has anybody seen that before and/or has an idea why? I tried it with the same files on a actual mac and there were no problems at all.
thx
martin

thx for the answer!
for now i can rule out the CF Card.
i used the same reader, but i'm not 100% certain for now, since i sometimes have to plug it in twice on the mac (but yeah that could be a prob with teh mac as well). i test it with another one tonight. also another hard disk as destination.
thx again for your fast answer!
martin

Similar Messages

  • Error after import external webservice(RFC) wsdl url to Process Composer

    Hi all,
    I try to use RFC webservice in my BPM as below:
    1. Expose RFC as webservice using CAF (import external service RFC and then create application service use this external service)
    2. Define Destination in NWA.
    3. Create a Process Composer project, and import the external webservice(RFC) wsdl file as service interface in the project.
    After importing, i get error : the port type specified for the ...binding is undefined. Check port type name and ensure it is defined.
    If i import another external service, not RFC (such as business object), there is no error.
    My system is NWCE 7.11
    Thanks in advance,
    Sinh.
    Edited by: Sinh Nguyen Van on Jul 20, 2009 8:29 AM

    Hi Bharath,
    Below is content of wsdl url and error message, thanks
    Error message:
    The 'zfm_rfc_caf_as' port type specified for the 'zfm_rfc_caf_asBinding' binding is undefined. Check the 'zfm_rfc_caf_as' port type name and ensure it is defined.
    wsdl url :
    - <definitions xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" xmlns:b0="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as">
      <import namespace="http://www.sap.com/caf/demo.sap.com/s00_caf_rfc/modeled/zfm_rfc_caf_as" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl?wsdl=binding&mode=ws_policy" />
    - <service name="zfm_rfc_caf_as">
    - <port name="zfm_rfc_caf_asBindingPort" binding="b0:zfm_rfc_caf_asBinding">
      <address xmlns="http://schemas.xmlsoap.org/wsdl/soap/" location="http://sinhnv-lap:50000/zfm_rfc_caf_as/zfm_rfc_caf_asBeanImpl" />
      </port>
      </service>
      </definitions>
    Edited by: Sinh Nguyen Van on Jul 22, 2009 4:18 AM

  • Invalid Color Space error after update Reader to 9.3.3

    After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A.  This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
    It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
    Exports in other formats, other than  PDF/x-1, X-1A and X-3 open normally.  How to solve this??

    any suggestions?

  • RSM2052 error after import Support Package SAPKW70022 in MSSQL Data Load

    Hi;
    I imported Support Package SAPKW70022 but after import data load from  MSSQL gives error RSM2052.
    How can I solve my problem.
    Best Regards.

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Image Corrupted After Import into LR4?

    Several times now I've imported images into LR4 from my External HD and and a few the files are corrupted. (See attached image)
    I realize that LR is not suppose to do anything to the files on the disk when importing... but I've checked the RAW images from back-ups and they are not corrupted prior to import into LR. AFTER import into LR the actual file (on the external HD) IS corrupted in both LR and then on the External HD.
    My workflow has been to copy files from my CF  Card to the External HD (Western Digital 3 TB) ino the appropriate file... then go to LR4 and import.
    Can anyone suggest what the problem is?  I replaced the Card Reader... same problem occurs.  I've checked numerous RAW files in Bridge... none are shown as corrupted (prior to LR4 import)

    The corruption may or may not be “sudden”.  If things look ok in Library then it happened sometime between initial preview building during import and you’re viewing the image in Develop.   If the last place things looked ok was in the Import thumbnail grid, then that is only showing the camera-embedded previews, so the images may be corrupted on the card, already. 
    The most important thing is to determine what the problem is, where the corruption comes from, so you can fix it.  It could be the camera, the card, the camera-to-computer USB cable, the card-reader, the usb-slot, the computer-memory, the computer hard-drive, the USB-drivers, LR, itself, or some other software, like Microsoft Security Essentials has caused problems for some people in the past, although why is not really understood. 
    If the corruption is still occurring with the latest images, then you can experiment by changing one or more of the components mention above, and see if things are ok or still corrupted.
    As far as recovery, if part of the image data is missing or zeroed out overwritten with random junk, there’s no way to get that bad data, back, from the existing file because the files, themselves, only have one copy of the data.
    The three things I can think of to suggest are:
    1)      If the preview in Library doesn’t show the corruption then there are ways to retrieve the previews from the LR preview cache as JPGs.  This isn’t the same as the RAW data, but is better than nothing.
    2)      If the camera-embedded preview has not been damaged—it is typically stored in front of the raw data so depending on where the damage is, it could be intact, then there are ways to extract the camera-embedded preview from the raw file, which again is better than nothing.
    3)      The best thing is if you have a backup of the images that don’t show the corruption, either because the images are still on the card, or because you made a backup during import and the corruption happened sometime after import, then you could copy those over the top of the corrupted files and be ok.
    These things may or may not be possible depending on your situation, though.  If you don’t have any backups that are ok, and LR’s previews are bad, and the in-camera preview is tiny or also damaged, then you’ll entirely out of luck for those images.  And things maybe really bad if it’s the hard-drive that’s failing and you have no backups of your images, there, either.  It is important to determine what is wrong, and with the least effect on the images that are still good.

  • Pictures inclined after importation

    Hello!
    After importing pictures, some are inclined for no reason and i found no way to rotate them. I really need help, i need to make a slideshow for a wedding (next week) ^^'
    Thank you!!

    Can you post a screen shot?
    What version of P Pro?
    What is the media?
    What is the sequence setting?
    How were they imported?

  • Receive an ORA-01403: no data found error after importing

    After making changes to an application and exporting it and importing it into another applications (copy of the app) on the same server I recieve this error.
    Error Single Sign-On Procces Failed
    However if I export and import the application to a different server it works fine.
    This is done in APEX
    Thanks,
    Joyce
    Edited by: user11806126 on Aug 21, 2009 1:53 PM

    Again, please tell us your first name and show it in your forum profile to help us. Thanks.
    I asked you before to provide the versions of every major component in your configuration (apex, database, etc.).
    After making changes to an application and exporting it and importing it into another applications (copy of the app) on the same server I recieve this error.Is it relevant that you made changes to the application or does this problem manifest itself with unchanged versions of the application that you export and then import/install into the same apex instance? Did you install it in the same workspace or a different workspace?
    If you can install the application into your workspace on apex.oracle.com we might be able to find some clues.
    Scott

  • ESS Error after imported EA-HR 602

    Hi all,
    I was imported enhancement pack 2 for single component EA-HR (602) as requested by client to use function "HCM Processes and Forms" according to sapnote below:
    Note 1024326 - Corrected UI for role HR administrator available
    HCM Processes and Forms:
    The following technical components are prerequisites for HCM Processes and Forms with Enhancement Package2 (EHP2):
    EA_HR 602 (imported)*
    BP ERP05 HR Administrator 1.11 (imported)*
    All the requirement that addressed in below sapnotes had been checked before proceed:
    Note 1045303 - Installation of Enhancement Package 2 on SAP ERP 6.0
    However, we encountered problem accessing ESS in Portal after we imported EHP2 for EA-HR:
    ERROR LOG
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Syntax error in program SAPLPTRA_UTIL_MAIN      error key: RFC_ERROR_SYSTEM_FAILURE  
    We ran a consistency check for program SAPLPTRA_UTIL_MAIN and encountered syntax error:
    ERROR LOG:
    Function Module PTRA_UTIL_WELCOME_SCREEN_GET
    Statement "RP_IMP_C1_TC" is not defined. Check your spelling. .
    According to change document of the program, it was modified during importing of ehp2 EA-HR.
    Currenrt Support Package Level :
    Component     Software Component      Level
    SAP_ABA                    700                     0015
    SAP_BASIS            700                     0015
    ST-PI                    2005_1_700     0006
    PI_BASIS                    2005_1_700     0015
    SAP_BW                    700                     0017
    SAP_AP                    700                     0012
    SAP_APPL            600                     0013
    SAP_HR                    600                     0029
    EA-IPPE                    400                     0013
    FINBASIS                    600                     0013
    EA-RETAIL            600                     0013
    EA-PS                    600                     0013
    EA-HR                    602                     0000
    EA-GLTRADE            600                     0013
    EA-FINSERV            600                     0013
    EA-DFPS                    600                     0013
    EA-APPL                    600                     0013
    Do we missed out any prerequisite support packages?
    Appreciate if any advise providen.
    Thanks.
    BR,
    Nancy

    Hi Nancy,
    From your system component information, EA-HR still in SP 00.
    You are recommended to import SP for EA-HR ehp2 once installed EHP2 package.
    You may try to import support package for EA-HR and let c if it works.
    Help me dapao. Thanks
    BR,
    Terry
    Edited by: Tow Terry on Mar 20, 2009 4:40 AM

  • Navigator display returns error after import

    I am able to run the export/import successfully (while attempting to transfer an entire application from one instance to another).
    However, when I browse through the Navigator on the target instance, I get this error:
    An unexpected error ORA-01422: exact fetch returns more than requested number of rows occurred when executing default_action action of the APP datasource. (WWC-38130)
    Any ideas?
    Thanks.

    I am sure, It created another provider, with same name.
    Easiest solution for this problem would be restore backup, remove providers from destination which you are planning to import from source.
    I know this is not the solution anybody is looking for, but after spending good time to look for tables where the providers are stored & other referencing entries in different tables.
    It will take you for ride. If you want to go for one.
    Vikas

  • Connect-MsolService error after importing MSOnline module

    I'm receive the following error when I run Connect-MsolService -
    Exception of type 'Microsoft.Online.Administration.Automation.MicrosoftOnlineException' was thrown. + CategoryInfo : OperationStopped: (:) [Connect-MsolService], MicrosoftOnlineException + FullyQualifiedErrorId : 0x80090345,Microsoft.Online.Administration.Automation.ConnectMsolService
    + PSComputerName : xxxxx
    Background - I am using powershell to manage Active Directory, Exchange and Sharepoint Online user data. I have an SSIS package that dynamically builds arguments passed to powershell scripts for creating new and updating existing AD user data, adding/updating
    necessary security and distribution groups for each user, enabling exchange mailboxes, and passing custom attribute data to Sharepoint online user profiles.
    In effort to maintain the purity of the SQL server running the SSIS package, dynamic sessions are created to servers having the modules necessary for import. This allows me to do all of the things mentioned above without having to install the different modules
    on my SQL server.
    My final hurdle is automating the Office 365 licensing. To script licensing assignments I create a session to our server having the necessary MSOnline module and import it giving me access to the Cmdlets, like Set-MsolUserLicense. However, before I can use
    the Cmdlets I have to connect to the MSOLService.
    When I run Connect-MsolService, the credentials modal pops as expected, the appropriate credentials are entered (which have been verified a thousand times over), and I receive the error shown above.
    These commands all work fine when I run them from the server where the MSOnline cmdlets are installed, but return the error when run post successful import-module on my SQL server.
    Here are the commands used for establishing the session and importing the MSOnline module -
    $securePassword = ConvertTo-SecureString $Password -AsPlainText -Force
    $cred = new-object -typename System.Management.Automation.PSCredential -argumentlist $Username, $securePassword
    $outputSession = $Null
    foreach($session in Get-PSSession){
    if(($session.ComputerName -eq $Server) -and ($session.Availability -eq "Available")){
    $outputSession = $session
    if ($outputSession -eq $Null){
    $outputSession = New-PSSession -ComputerName $Server -Credential $cred -Name 'MSOnline'
    Invoke-Command -Session $outputSession -ScriptBlock {Import-Module MSOnline}
    Import-PSSession -session $outputSession -module MSOnline -AllowClobber
    Connect-MSOLService is the only Cmdlet giving me an issue using these methods. Any help you can provide will be appreciated.

    Thanks, Malar.  We'd hope to accomplish the connection without having to install anything locally.  However, after much trial and error and discussion with Microsoft support team we settled on that the components must be installed locally to work.
    So, we finally gave up attempting to use the tools from a remote server, installed the MSOL sign-in assistant and the Azure Active Directory module for Powershell locally and were able to complete the connection.
    Rocky

  • Console Messages:Color profile errors after fresh install of Snow Leopard

    This is a dump of the Console Messages for my Macbook Pro immediately after a fresh install.
    Are all the Color profile errormessages normal?
    24/12/2010 16:06:02 com.apple.launchd[1] * launchd[1] has started up. *
    24/12/2010 16:06:17 com.apple.launchd[1] (com.apple.bsd.dirhelper) Throttling respawn: Will start in 6 seconds
    24/12/2010 16:06:18 com.apple.launchd[1] (com.apple.smb.sharepoints[24]) Exited with exit code: 71
    24/12/2010 16:06:20 com.apple.launchd[1] (com.apple.bsd.dirhelper) Throttling respawn: Will start in 3 seconds
    24/12/2010 16:06:35 com.apple.service_helper[90] launchctl: Error unloading: com.apple.backupd-auto
    24/12/2010 16:06:35 com.apple.service_helper[90] launchctl: Error unloading: com.apple.backupd-wake
    24/12/2010 16:06:35 com.apple.service_helper[90] launchctl: Error unloading: com.apple.backupd-attach
    24/12/2010 16:06:37 com.apple.fontd[82] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    24/12/2010 16:06:38 com.apple.fontd[82] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    24/12/2010 16:08:52 com.apple.coreservicesd[49] ThrottleProcessIO: throttling disk i/o
    24/12/2010 16:18:07 com.apple.service_helper[150] org.ntp.ntpd: Already loaded
    24/12/2010 16:21:43 com.apple.coreservicesd[49] ThrottleProcessIO: throttling disk i/o
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorIllegalArgument: CGSGetDisplayBounds (display 0)
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Warning>: CGSLookupServerPort: _CGSSessionDeathWatchPort(gSessionPort) returns 268435459
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: kCGErrorFailure: CGSColorProfileCreateWithColorProfileID: Cannot initialize color profile client
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Error>: (ipc/send) invalid destination port: CGSGetNextEventRecord (Inline) connection 0x7b07, 16384 bytes
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Warning>: CGSShutdownServerConnections: Detaching application from window server
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
    24/12/2010 16:24:34 [0x0-0x8008].com.apple.IncompatibleAppDisplay[203] Fri Dec 24 16:24:34 Jeremy-Gordon-Flowerss-MacBook-Pro.local IncompatibleAppDisplay[203] <Warning>: 3891612: (connectAndCheck) Untrusted apps are not allowed to connect to or launch Window Server before login.
    24/12/2010 16:24:36 com.apple.launchd.peruser.501[215] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    24/12/2010 16:24:36 migCacheCleanup[221] Flushing Cache Locations...
    24/12/2010 16:24:36 com.apple.loginwindow[205] 2010-12-24 16:24:36.819 migCacheCleanup[221:903] Flushing Cache Locations...
    24/12/2010 16:24:38 SoftwareUpdateCheck[229] Checking for updates
    24/12/2010 16:24:40 com.apple.fontd[228] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    24/12/2010 16:24:42 com.apple.launchd.peruser.501[215] (com.apple.Kerberos.renew.plist[247]) Exited with exit code: 1
    24/12/2010 16:24:43 com.apple.fontd[228] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
    24/12/2010 16:26:53 SoftwareUpdateCheck[229] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    24/12/2010 16:26:53 SoftwareUpdateCheck[229] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Terminal"></bundle>
    24/12/2010 16:26:53 SoftwareUpdateCheck[229] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.DiskUtility"></bundle>
    24/12/2010 16:26:53 SoftwareUpdateCheck[229] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.SystemProfiler"></bundle>
    24/12/2010 16:26:53 SoftwareUpdateCheck[229] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.RAIDUtility"></bundle>
    24/12/2010 16:26:55 Software Update[269] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    24/12/2010 16:26:55 Software Update[269] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.Terminal"></bundle>
    24/12/2010 16:26:55 Software Update[269] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.DiskUtility"></bundle>
    24/12/2010 16:26:55 Software Update[269] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.SystemProfiler"></bundle>
    24/12/2010 16:26:55 Software Update[269] PackageKit: Missing bundle path, skipping: <bundle id="com.apple.RAIDUtility"></bundle>
    24/12/2010 16:28:14 SoftwareUpdateCheck[229] Downloading "iTunes"
    24/12/2010 16:28:47 SoftwareUpdateCheck[229] Background check cancelled by user-initiated update.
    24/12/2010 16:28:47 SoftwareUpdateCheck[229] Auto-download of "iTunes" SUCCESSFUL.
    24/12/2010 16:28:47 com.apple.launchd.peruser.501[215] ([0x0-0xd00d].SoftwareUpdateCheck[229]) Exited with exit code: 102
    24/12/2010 16:50:06 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:50:06 com.apple.WindowServer[84] Fri Dec 24 16:50:06 Jeremy-Gordon-Flowerss-MacBook-Pro.local WindowServer[84] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    24/12/2010 16:50:39 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:51:45 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:52:17 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:52:53 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:53:25 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:55:44 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:56:39 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 16:57:05 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    24/12/2010 17:00:45 com.apple.WebKit.PluginAgent[344] Debugger() was called!
    Message was edited by: gr8fanboy - fixed os version was 10.6 at this point

    try this idea: Do a leopard install to an external disk then do a Disk Utility "restore" function to that clean partition. So you restore from the external to the internal partition. Should leave Bootcamp untouched.

  • Error after importing PAR file into NWDS

    Hi Experts,
    I have imported a par file into my NWDS worlspace . While building the project it's giving the following error .
    import javax.servlet.http.HttpServletResponse can't be resolved .
    While i am organizing the importa , the same import is getting deleted and i am getting a new error as follows .
    The project was not built since its classpath is incomplete. Cannot find the class file for javax.servlet.http.HttpServletRequest. Fix the classpath then try rebuilding this project.
    jdk1.5 has been configured correctly inside NWDS and i have tested it also .
    Can anybody help me out regarding this .
    Thanks in advance .

    Hi Jain,
    Just right click on project to properties->java build path-> add external jars add the jar file servlet.jar.
    Venkat.

  • Error after importing a Resource .xml file

    Hellos,
    We are moving from development to test.
    I wanted to load the Scripted JDBC Resource we have developed. We exported the Resource from idm/debug, removed the id='xxx' elements and then imported the .xml file via Configure/Import file.
    Now, I get the error:
    ErrorError
    java.lang.IllegalStateException: Error attempting to decrypt: Error initializing Encryptor: Missing required Encryption Key: F9388B0C42691A37:7A11431D:1166721AE86:-7FFC
    when trying to access the resource in the test environment...
    It is a database resource so it has an user/password pair, maybe the Password is causing me grief.
    What is this error meaning and how do I resolve it?

    greenfan88 wrote:
    It is a database resource so it has an user/password pair, maybe the Password is causing me grief.
    What is this error meaning and how do I resolve it?That's the point. Password is encrypted with a particular key. Remove password and reenter it on the resourceform.
    You could also export the ServerKey from dev, but that seems to be not a good solution (at last, not for me).
    regards, M.

  • Error after importing report

    Hi all,
    I created a Discoverer report on one instance. One new folder (joined with two old folders) and one new workbook was created. I exported the the following files:
    1) business area definition
    2) old folder joined with new folder
    3) old folder joined with new folder
    4) new folder.
    5) the workbook.
    Before I run the installation script I deleted the the old folders from new instance where it was supposed to be moved. The report is working fine on old instance. I run the installation script and it worked properly (no error in any installation log), now when I run the report i get the error message.
    Cannot join tables used in the workbook. Item dependency ".................join shown here........................." not found in EUL. EUL on both the instances are same and one instance is replica of other but when I move the report to that intance it start giving error.
    Can anybody tell what am i doing wrong? What could be the error?
    Regards,
    Usman

    Well, I am confused. I don't understand your export step 2 and export step 3 (which seem to be duplicates as well, for some reason).
    My normal approach would be to export the business area (step 1) and then export the workbook (step 2). I also don't delete objects out of the target instance. Whether that deletion is leading to your problem, I do not know. Would think not, but could be wrong.
    By trying to export selected objects in the EUL as your approach instead, it is possible that you may have missed exporting an object that you needed to export. I am saying that is a possibility - not saying it actually happened. Oracle documentation is not clear on what they mean when you select "business area definition". I doubt this is the issue actually, but I could be wrong to think that.
    If you go into Discoverer Administrator in the new instance and select the business area that is involved with this problem, what do you see? I am thinking to look at the join definitions you see for the old folder, and the join definitions you see for the new folder. Write down what you see. Then log off and log into the old instance. Look at the join definitions for both the old folder and the new folder. Are there any differences? You may have to actually look at the join properties for each join on each folder as well, looking for a difference. Especially if maybe you have an internal id difference between the two instances.
    Are you sharing folders among business areas? That could be an issue if you are. I started out doing that, only to stop when I ran into problems with promoting from development to test. What can happen is this. Create new Business Area A. Populate iwth folders. Create new Business Area B. Use share folders function to populate with some (but not all) of the A folders. You also create some new folders for B, and join shared folders to new folders in B. A also has joins between shared folders and folders not shared. Shared folders carry the joins across business areas. So if I promoted B before A, I would get an import error because I was trying to import a B folder that had a join to an A folder that did not exist in the EUL. Not saying that is your problem here, but that is why I ask if you might be sharing folders across business areas.
    It sounds like either you are missing something (either from the delete or not being exported) or you might have an Discoverer internal id problem, is what I am thinking off the top of my head. Do you have the EUL business area and workbooks installed? If so, you might try using those to see if you can identify the issue. Otherwise this may be a situation where you need to log a service request with Oracle support. It may take someone who can look at your actual data tables to figure out what is going on (something we on this forum cannot do).
    Good luck.
    John Dickey
    Edited by: John Dickey, McCarthy on May 28, 2010 1:17 PM

  • Permanent error after import IOkit framework

    i'm new in this forum.
    I'm trying to work with light sensor in iphone but the only framework that permits it is IOKit.
    i tried to add the framework follow this guide:
    http://ios-blog.co.uk/tutorials/iokit-an-introduction/
    but xcode returns me some error.
    Error's List: http://pastebin.com/TMimhsXF
    i linked the framework in Build Phases and after this i downloaded the header and put in search path(/Developer/SDKs/MacOSX10.6.sdk/System/Library/Frameworks/IOKit.framework) the path .
    Now afterward i put the framework ( path of framework)in the framework folder. But when i compiled it xcode returned this error and if i try to remove that framework the problem persist.
    How to resolve this problem?

    Why are you using MacOSX10.6.sdk if you're building an iOS app?

Maybe you are looking for

  • Apex 4.0 display image item :BLOB column returned by SQL statement

    Hello I'm creating an display image item in apex 4.0. The source is a BLOB column returned by SQL statement. When I'm issuing an sql statement like this:    select lado.blob_content    from   large_documents      lado    ,        large_doc_headers   

  • F110 Query

    Hi, I am doing F110 for three vendors. The entire generated proposal is marked as an exception. the line items are showing the correct amount but when i go for editing the proposal & click on one of the line item; it doesn't show any details except V

  • BI content for Sneak Preview SAP NetWeaver 7.0 ABAP Trial Version

    Hi, Can any one tell me or provide me the URL where to download BI Business Content for SAP NetWeaver 7.0 ABAP Trial Version? Thanks in advance, Regards, Kannan Edited by: Kannan Jagadeesan on Apr 28, 2008 8:40 AM

  • G5 won't boot from external hard drive

    I have installed Leopard on my external hard drive, but have not gone through the 'setup'. I want to boot my G5 from the hd now, but when I restart holding down the option key, the internal hard drive is the only option that appears. When I do boot f

  • Regex: UNGREEDY flag or (?U)

    Hi, I'd like to port a generic text processing tool, Texy!, from PHP to Java. This tool does ungreedy matching everywhere, using `preg_match_all("/.../U")`. So I am looking for a library, which has some `UNGREEDY` flag. I know I could use the `.*?` s