Color printing help with large graphics Reader 11.0.3
Good morning! We recently upgraded to 11.0.3. Windows 7 64-bit. We've had issues printing large color graphics from Reader 11.
For example, the PDF will have an intricate purple graphic with matching purple text blocks underneath. Print preview shows correctly, but when printed the graphic prints brown instead of purple. The purple text blocks print correctly. This seems to happen sporadically, but seems to be with complex graphics.
Documents from all other apps print OK and if we open this .pdf from Acrobat X Standard and export it to a .png file the colors print correctly.
The graphic files come from a myriad of sources and customers and we don't have control over the way the documents are originally saved or what apps are used to create the artwork.
Any idea why the graphics colors aren't printing and if there are settings we can adjust in Reader 11 so they will print correctly?
We've tried:
- Printing to several printers with different drivers and all yield the same results. (Toshiba eStudio 3530c with PCL6 and PS drivers, Epson Artisan 835, HP OfficeJet 8600, Samsung CLX-6200x)
- Adjusting the Overprint Preview settings under File -> Preferences and setting "Simulate Overprinting" under the Advanced button in the print preview window.
- Selecting "Print As Image" under the Advanced button in the print preview window.
- Adjusting the Document Color Options under File -> Preferences -> Accessibility.
Thanks in advance for any help!
Fastest thing you can try: use Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement.
If that doesn't work, you can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.
Similar Messages
-
Help with opening Adobe Reader and downloading updates
I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
> -
I need help with adobe iv reader.
iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.
i am trying to pin a website in internet explorer to my task bar,i get a
message that adobe v1 could not decode the website, i am not computer saavy
so i don't know what that means,plus this is a new computer 4 me.plus it
worked fine a few days ago. tyvm 4 ur help.
regards,
ray nist
In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time,
[email protected] writes:
Re: i need help with adobe iv reader.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5400013#5400013) -
I Require Help With Selected Graphic Print in Adobe Acrobat XI
In Adobe Acrobat X a user was able to highlight a portion of a PDF document go to file and print with the selected graphic option which would print only the highlighted portion of the PDF.
In Adobe Acrobat XI there is no selected graphic option. How does a user print highlighted/selected portions of PDFs with Adobe Acrobat XI?Use the Marquee Zoom tool to select the portion of the PDF page that is of interest. In Acrobat XI's Print dialog select the desired attached printer. In the dialog locate and click on "More Options". Tick "Current View". The PDF page content selected by the Marquee Zoom tool will be printed.
Be well.. -
My issue is that I am not getting print quality compared to the image I see on my screen. Just recently it has been very wishie washie. My printer is supposed to be excellent for producing color prints
I have contacted Canon support but they told me that the signals that are sent to the printer originate from an Apple product, therefore, it is an Apple mac problem not there's. I am wondering if my on screen proofing and/or printing profiles are correctly set. I notice that in 'print profiles' there are nine different options for printing from my particular printer. How confusing is that?
I have also found that when I choose a high standard print option my photo print comes out very red.
Can some kind person please help me? I don't seem to be getting any help from anyone else! Thanks in anticipation.You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
Help with BufferedImage - Graphics updating
Hello All-
I will try to explain the best I can, still new to Java2D so little confused
Hopefully the explanation makes a little bit of sense....
I have a tabbedPane, one tab with no graphics and the other tab full of graphics
The tab with the graphics on it is basically a bunch of rectangles that will change color depending on real time data I am pulling from a Mysql DB
For sake of performance I only want to have to repaint those rectangles when the data from the DB changes (i.e. repaint the rectangles when the bit changes from 1=good to 0=bad)
Any help on how to start implementing this would be absolutely wonderful
or if I could explain something any better please ask.
Thank you in advance
JanduzerbotsIf you're thinking of just grabbing the graphics image of some component on the fly for rendering, that
wouldn't work well. Here is a link to some tips on doing your own drawing.
Again, yes, you may have to define your own component class. The only other alternative I can think of is to have a JLabel
that has an ImageIcon that holds your BufferedImage, and you update this by calling repaint after updating
the BufferedImage. -
Help with larger sized voice wlan.... design considerations.... tips...etc...
Hi Everyone,
I'm hoping that you guys and gals can help me with an ongoing problem that we have at one of our sites. We're working on areas of the location due to it's size and phone load. We have an area, that I will refer to as building A, that is roughly a square that is 240' x 240'. The inside of the building has some pallets inside for storage(they allow RF to penetrate through them) and also some metal production lines. There is also a mezzanine / elevated area in the middle that the users can walk under. It's not very large, but it would affect a phone if you walked underneath it while making a call. So, now that I have a brief description of the environment, I will tell you the equipment I'm running...
1 x 4402 50AP Wireless Controller with 6.0.199.3 (MR3) installed.
We currently have nine AP's installed in this area, with 4 up front so that way they cover the office areas better. Most are 1231G's, but some are 1242's.
Since we do not have A radios everywhere (budgetary decision) we are running all of these phones on 2.4Ghz (Yikes! I know!)
The 7920's use LEAP and the 7921's use PEAP MS-CHAP v2 with CCKM enabled on the controller.
I also have 802.1p wired QoS enabled for the voice QoS profile and it is applied to our voice WLAN.
We have conference rooms in the front area that will need to support roughly 20-30 maximum mixed 7920 and 7921G phones in a roughly small area. (Yikes! I know!)
We also have a 2106 with mesh .54M installed, but it is for outdoor AP's and should not be affecting this area.
So, I guess my questions are....
Has anyone ever operated the 7920 and 7921G's in mixed mode?
I'm thinking about separating the 7920s on 2.4 and tell the 7921's to prefer the A band or just use A. This will require A radios / surgery, but we've dealt with different code trains, TAC configs, and even added a few more radios. I think it's time to say we need to redesign this area. It doesn't help that phones keep getting purchased either....
What rule of thumb would you guys / gals say would be appropriate for this phone count in terms of the number of AP's I should use?
Since we're dealing with two different phone models, it makes it hard to simply just read the deployment guide. I know these phones can coexist, I just think we're running into over capacity and problems with 802.11B in the mix. In the conf room right now, there are most likely signals from at least two AP's. This doesn't seem like enough bandwidth for just the 2.4 Ghz range when 20 - 30 phones are in there. Not all of them are calling, but the associations / mgmt traffic alone must be horrendous since the phones are 802.11B
We are going to do a manual survey with a 1242 since that AP will support both phone models. I think we may need to survey twice if we're going to go this route; One survey for the 7920's on 2.4Ghz with a 1242AG and one survey on 5Ghz with a 7921G. I think that will provide the info we need to get the AP's repositioned where they need to be.
What kind of power levels should I be using in an area like that? We've originally had a survey at 50mW, but since then we turned the power down to pwr lvl 3 in some spots due to the additional AP's. I've seen references of roughly 1 AP per 3000 sq. ft at pwr level 4, but that seems overkill.
Can we run mixed power levels on AP's with the phones? Or will that cause one way audio due to the transmit power diffrences in the cells?
I'm thinking that we should pick a power level, survey the -67 cell size at the power level, add more AP's so that way they are overlapped 15-20%, and then actually implement the design. I'm pretty good at getting decent channel assignments in place. I know of non-overlapping channels, RRM, etc. I also have an AirMagnet laptop with an Aironet Adapter. It is good for finding noise, interference, etc...
I understand this is practically a book, but at this point, we've been trying a LOT of different things in order to get this to work properly. I think it's finally time for me to "strongly suggest" that we do the following...
1. Choose ONE phone model.
2. Choose ONE AP model.
3. Make sure to implement the 5Ghz band for all AP's so we have complete coverage.
4. Choose ONE power level for each band. This will affect the coverage and placement of AP's. I'd imagine that we'd need to survey with A first, and then survey with b/g. Typically we can use the 1242 and get about the same cell size on both bands, but 5Ghz is a higher frequency and may not penetrate as much as 2.4 Ghz..
5. Come up with a new coverage map based on a manual site survey with the phones mentioned above.
6. Implement the design.
7. Use it.
8. Try not to have a heart attack when the system actually supports that many phones in that area...
So, please, let me know your thoughts and if you have any suggestions. It would be greatly appreciated. We've been slowly working out the gremlins in the phones there over the past few years. I'm more of a data wireless person myself, but I do have good luck with a low to moderate phone count (usually no more than 7 calls per AP). Once we start doing craziness like trying to get 20-30 802.11B phones to work in the same area on only one or two AP's, then things start to become a challenge, especially when we don't have the 5Ghz cells to help with the bandwidth requirements for voice....
Thank you for your time,
CraigThere's a pretty recent (last few months) Voice over Wlan design guide published (was published for the 9971 phones - but all great advice) and it recommends just about all the settings required for an off the shelf wireless voice network.
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/7_1_3/english/deployment/guide/9971dply.pdf -
MFP M476dw poor color print quality with streaking
I bought this printer in January and only printed half a dozen or so color prints, but always has color streaks. I have printed may 200 B&W pages and they seem OK. I ran the calibration I found in the operator interface, but doesn't make any difference. See attached original image and scan of the color print. Yes the scan looks just like the color print. Color cartridges all show 80% full. B&W cartridge is 70%. scan of color print Original ImageWhat can I do to improve this? I really was expecting better color print quality.
Dale007 wrote:
I am experiencing horrible print quality with this printer. Colors are way off what they appear on the screen - reds appear yellow, browns appear blue / green. The printer has new HP ink cartridges, both basic and advanced inkjet cartridge cleaning processes have been run and the inkjet alignment process has been run. What can be done to correct this problem? -
Adobe color print utility with Mac 10.9.2 Mavericks operating system
Is the "adobe color print utility" compatible with Mac 10.9.2 Mavericks operating system?
I am attempting to print without color management, using custom ICC profiles, and am informed that I need this utility to do so. Correct?Hi Jeff,
I am printing from CS6 photoshop. It pops up a message in the printer dialoge box that Photoshop cannot print with NO COLOR MANAGEMENT and to download this utility. I also downloaded it and I cannot open it, even tho I instructed the security to allow it. .. Perplexed aand confused, I am. thank you!! -
Poor Color Print Quality With the HP Officejet 6500 Wireless E709n
I am experiencing horrible print quality with this printer. Colors are way off what they appear on the screen - reds appear yellow, browns appear blue / green. The printer has new HP ink cartridges, both basic and advanced inkjet cartridge cleaning processes have been run and the inkjet alignment process has been run. What can be done to correct this problem?
Dale007 wrote:
I am experiencing horrible print quality with this printer. Colors are way off what they appear on the screen - reds appear yellow, browns appear blue / green. The printer has new HP ink cartridges, both basic and advanced inkjet cartridge cleaning processes have been run and the inkjet alignment process has been run. What can be done to correct this problem? -
Not exactly iweb - need help with a graphic for my site
This doesn't fit anywhere so dumping it here. I drew by hand a graphic I want to use with iweb to put on my site as my site's logo. Main problem is that getting the background transparent isn't working well as when it was scanned the scanner didn't back the background "pure" white. I have tried adjusting the whitepoint and setting the color depth down, but still no good. I don't know a ton about graphic program use. I have an older copy of graphic converter that came on this powerbook when i got it. I would be fine having the graphic loose the marker look and have solid fill colors - just I am not good enough with computer drawing tools to do it on the computer! So I either need to get a volunteer to help me out, or some help with some detailed instructions to get this to work out... (also I am broke so no cost/shareware is only option here)
many thanks!!!!
I can get you a scanned jpg of the pic if needed.THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png -
Printing help with Canon Printer
I recently got asked to do a wall mural for my schools athletics department. I have a Canon ipf9100 60" printer and I need help printing the project. We are printing on 36" rolls of inkjet wallpaper. Using a total of 5 strips to cover the wall. I have the project designed and ready to print. I just need to know how to set the printer up to print these pieces off and make sure everything lines up. Whenever I use borderless printing it enlarges the image by x% then trims a 1/4" off the edges to achieve the desired size of the borderless print if that makes since to anyone. Is there a plug in or anything already in photoshop to break the project up and print it the way it needs to be printed?
If you want to do borderless printing I would give each panel a half inch bleed and the set a line that prints at the join marks or where you want to trim them.
If you don't use broderless printing you could print the whole length at once and trim where you want to create panels if you need to. By the way the iPF9100 plugin can print 60,000 pixels wide. -
Print issue with Adobe PDF reader print in IE9
We are unable to print Brava PDF documents with Adobe PDF reader activeX enabled in IE9. The same runs fine in Chrome with Adobe PDF reader activeX enabled.
I noticed Chrome uses
C:\Program Files\Adobe\Reader 10.0\Reader\AIR\nppdf32.dll, whereas IE9 uses-C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll.
Has anyone faced this issue?Can you print other pdf files from within IE9? Can you download the files and print them directly from Reader on you computer? Please list the steps you are using to print the pdf from IE9.
-
Need help with buying graphics card and ram for MSI 865PE NEO 2-V
Hi,
I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
I also want to buy 512Mb or 1GB graphics card.
as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
I found graphics card allready, i just need to know if it will fit.
the card is
NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
Thanks for help.here you can see test reports for your mobo:
http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport -
Need help with my graphic calculator!!!
Hello everybody!! I need help with my little program I made.... The problem is that I am unable to use to calculate but it is possible to compile the code!! What should I do?? Thanks in advance.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Aritmetik extends JFrame implements ActionListener{
private JLabel l1 = new JLabel("Tal1: ", JLabel.LEFT);
private JLabel l2 = new JLabel("Tal2: ", JLabel.LEFT);
private JLabel l3 = new JLabel("Resultat",JLabel.LEFT);
private JLabel l4 = new JLabel(" ", JLabel.RIGHT);
private JTextField t1 = new JTextField(" ",10);
private JTextField t2 = new JTextField(" ",10);
private JButton b1 = new JButton("+");
private JButton b2 = new JButton("-");
private JButton b3 = new JButton("*");
private JButton b4 = new JButton("/");
public Aritmetik(){
Container v = getContentPane();
v.setLayout(new GridLayout(5,2));
v.add(l1);
v.add(t1);
v.add(l2);
v.add(t2);
v.add(b1);
v.add(b2);
v.add(b3);
v.add(b4);
v.add(l3);
v.add(l4);
b1.addActionListener(this);
b2.addActionListener(this);
b3.addActionListener(this);
b4.addActionListener(this);
pack();
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public void actionPerformed(ActionEvent e){
int tal1 = Integer.parseInt(t1.getText());
int tal2 = Integer.parseInt(t2.getText());
if(e.getSource() == b1){
if(t1.getText().equals("") || t2.getText().equals(""))
JOptionPane.showMessageDialog(null, "Mata in tal!");
else{
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
else if(e.getSource() == b2){
int sub = tal1-tal2;
l4.setText(" " + (sub));
else if(e.getSource() == b3){
int multi = tal1*tal2;
l4.setText(" " + (multi));
else if(e.getSource() == b4){
int div = tal1/tal2;
l4.setText(" " + (div));
public static void main(String[] arg){
Aritmetik A =new Aritmetik();Here is your problem:
public void actionPerformed(ActionEvent e){
int tal1 = Integer.parseInt(t1.getText().trim()); // add the trim()
int tal2 = Integer.parseInt(t2.getText().trim()); // add the trim()
if(e.getSource() == b1){
if(t1.getText().equals("") || t2.getText().equals(""))
JOptionPane.showMessageDialog(null, "Mata in tal!");
else{
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
}... Better ...
public void actionPerformed(ActionEvent e) throws NumberFormatException {
String tala = t1.getText().trim();
String talb = t2.getText().trim();
if ( tala == null || "".equals(tala) || talb == null || "".equals(talb) ) {
JOptionPane.showMessageDialog(null, "Mata in tal!");
return();
int tal1 = Integer.parseInt(tala);
int tal2 = Integer.parseInt(talb);
if(e.getSource() == b1){
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
else if(e.getSource() == b2){
int sub = tal1-tal2;
l4.setText(" " + (sub));
else if(e.getSource() == b3){
int multi = tal1*tal2;
l4.setText(" " + (multi));
else if(e.getSource() == b4){
int div = tal1/tal2;
l4.setText(" " + (div));
}Message was edited by:
abillconsl
Maybe you are looking for
-
MIGo allowed even if PO version is not comleted
Hi friends, I am facing the following problem. The process steps I carried out is as follows: 1. PO created fro quantity 10 2. PO released 3. PO changed to modify the quantity as 15. New versio created. Versio is NOT completed. 4. Attempted to do GR
-
I am getting error on creating even the empty web application project. The error message is as given below: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) I am using following build of Visual Studio: Visual Studio Pro
-
Hi guys, I am about to transport a Query and when I selected that query for transport; I saw for some query elements, the transport request and transport order holder have already been assigned different transports and different user respectively. Ca
-
Mozilla Plugin Check gives a vulnerable warning for Java, even though its up to date on the page it sends you to.
-
ARD 2.2 is a mess... Scanner broken
Apple please get this one right... This software stinks! I've had countless problems with prior versions on 10.3 and 2.1 and now with 2.2 and 10.4 I'm having this issue with the the scanner not picking up all of my clients on my local subnet. It pick