Color problem in charts

Hi!
I am creating dynamic charts in flex2.I wnt to fill color for
single series columnchart.Each column should be displayed in
different colors.Hw to fill colors for charts.pls help me

Hey I found out from the developers that this is actually fixed in version 29 via Bug 965861. Try the pdf viewer in the next version of Firefox, this will take care of that gradient. :-) Cheers.

Similar Messages

CR XI - Problem Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) of an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corrsponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors.
Thanks,Steve

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

How do I change the line color in a chart in Numbers on my iPad?

How do I change the line color in a chart in Numbers on my iPad?

Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
I found the appearance window, it just says "Path" (the color I want it to be that it's not)
"Stroke" 4pt
"Fill" (the color I want it to be that it's not)
"Opacity": Default
And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

CR 9 - Need HELP Setting Line Graph colors in the Chart Expert

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I created a Crystal Report (CR) based off an existing Trend Analysis report. I have created a VB6 application that calls the .RPT file I created for the report in CR. The VB6 app sets the report recordset via code that corresponds to the .TTX file, and the parameters . The report contains a Line graph that plots five pieces of data. The report & graph work good. The Problem: CR determines the color of each line on the graph. However, I need to set the color for each line to correspond to the colors used on our existing reports. The users are accustom to a certain color representing a certain set of data on the existing reports.   I have tried everything I can think of and from all documentation I can find, and nothing changes the line colors.   I have tried all of the following:
1.) From the Chart Expert, Option tab, I click the Format button next to Color and setup conditional color settings per each piece of data.   However, when I run the report these conditional color settings are not reflected on the CR graph.     I am using formula fields (based off database fields in the recordset) to produce the report. However, I only see the database fields to use in the conditional color formatting screen and not the formula fields.    I thought this would possibly be the cause why the colors wonu2019t change on the CR, but I canu2019t find a way to make the formula fields show up in the list.
2.)Also, I tried right clicking the individual lines of the graph and change the selected item color, but this didnu2019t change the color either. I do this in Design mode and Preview mode and neither one changes the color of the lines on the graph.
3.)I have also looked into the CR object model to see if I can change the line colors of the graph via code and it doesn't look like I am given this flexibility.
Do you know what I am doing wrong here?   I just want to be able to set the color of each line on the CR graph to the color I want instead of using the default colors. Are there some Hot Fixes that I need to apply to my copy of CR?
Thanks

Post Author: desselle
CA Forum: Charts and Graphs
Hello,
I got the problem fixed w/ the line graph not making the data lines the same color on the report as on the frmPlot graph.   Compare the two screen shots below.   The problem was as follows: When I created the graph (in the Chart Expert) the field u201CReadingDateu201D was not one of the Report Fields, and all the other fields were Report Fields (Reading, LowAlarm, UpperAlarm, LowerLimit, & UpperLimit). See the 3rd screen shot below. ReadingDate does show up as a Report Field now but it wasnu2019t at first.   Originally, this field was only available in the Chart Expert as a recordset field. When I changed this field to be a Report Field, the graph then allowed me to change the data series line colors.   This was not obvious at all.   From the beginning when I setup the graph and passed in the recordset from VB it graphed all of the data series fine.   The colors that the Chart Expert chose for each line just didnu2019t match what was on the frmPlot graph.   Anyway, it is working now.     I can at least say I learned (somethingu2019s to-do and somethingu2019s not to-do) a good bit about Crystal Reports in the process.
Thanks

How can I change the background color of a chart?

How can I change the default black background color of a chart to white?
Thanks
John

Hello All,
Another (and my preferred method) of bringing up the tools palette is to press
<shift>+<Rt-Click>.
Just another way to do something in LabVIEW!
Travis M
LabVIEW R&D
National Instruments

Macbook display color problems

macbook, mac os 10.5.8 updated, display color problem. when i try to fix it by color sync. it says:
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
Repair done - 0 out of 2 profiles fixed.
Kindly assist what to do.

Welcome to Apple Discussions!
Pictures would help. A good way to do this is to post them to a free photo sharing site like Flickr and then post a link.
Also, you are in the original MBP section, and I think you need to post your question in the newer MBP section:
http://discussions.apple.com/forum.jspa?forumID=1294
Good luck!

Custom Color Palette for Charts

Hi all,
Can I define the colors of a chart by a custom color palette in Design Studio (as you can do it in Web Intelligence) or does SAP intend to implement such a function in a next release? With CSS this isn't fully possible, because it doesn't allow you to coloring the additional line like the corresponding main line.
I've already seen and commented this post Re: Custom Color Palette for Charts / CSS, but it's still unanswered. Maybe I've with a new discussion more success.
Thank you and kind regards
Silvan

Carola,
Dirk Mayrock has a nice list here Design Studio 1.1 Full List of CSS classes (?)
I think you have seen that already.
Also see Styling a chart in Design Studio
Especially see participated David Gyurasz as he has answered several CSS questions CSS-Customizing of Column-Combination chart as an example
Tammy

Custom Color Palette for Charts / CSS

Is there a way of creating a custom color palette for charts (as you can do it in WebIntelligence) and install it on the tomcat?
Or will I have to set my custom colors in the css? And if so: where can I find a description of classes for Charts? Is there any description of css classes at all? All I could find was a list of classes for a crosstab (but no description).
Thank you
Carola

Carola,
Dirk Mayrock has a nice list here Design Studio 1.1 Full List of CSS classes (?)
I think you have seen that already.
Also see Styling a chart in Design Studio
Especially see participated David Gyurasz as he has answered several CSS questions CSS-Customizing of Column-Combination chart as an example
Tammy

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

A color problem in Apple's publishing App

I was wondering if you could help me with this problem，I really need some help，and here it is：
There is a Color problem in Mac publishing applications like Pages and Keynote，including iBooks Author，which really confuse me a lot。
When you use a certain color space（sRGB IEC61966-2.1 in this case）to create some colors with Apps like Illustrator CS6，Indesign CS6 & Photoshop CS6 etc. ，they look totally fine。BUT when you use iBooks Author （V2.0）to create the very same color with the very same color space，colors still look fine in the color panel，and here comes the problem：they look totally lousy in the actual document！！In fact，they look much lighter and faded。（See Image 1&2）
Above：Image 1
Above：Image 2
And this is also terrible with photos you import。（See Image 3）
Above：Image 3
Please tell me what I can do to solve this problem。I know maybe this is some sort of “basic” and “general” knowledge，but I really need your help。And I can't thank you enough if you can provide some effective solutions。

As far as I can see, the colour pallet and how colours are seen in any app on YOUR machine will depend on the computers System Preferences>Displays>Colour - choose your preferred setting.
I suggest first that you ensure that your colour profile settings are the same ( as your computer) in whatever Adobe application or in fact any outside image processor you use.
Creating or using a colour profile in Adobe and having a different profile on your system - will tend to give different colour hues.
A point also to remember is whatever you set up and is transferred to your product... when seen on an iPad may well be totally different again due to peculiarities and contrast / brighness setting of the iPad user.

Pavilion gv laptop colors on monitor color problem

I'm having color problems on my laptop. While the colors on my screen aren't terrible,most of the color/textures appear washed out and muted in comparison to other laptops I own. I've tried adjusting the brightness and calibrating the colors but it didn't fix the problem. I'm not sure what the problem could be. Thank you for your help.

Hey @crawford810 ,
Welcome to the HP Forums!
I understand the colours on your notebook look muted.
Could you please tell me which notebook model you have and the installed operating system? For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
For an issue like this you will want to test an external monitor to see if the issue is coming from the display, the GPU, or from Windows.
You will want to make sure your GPU and BIOS are up to date. You can download the most recent drivers and BIOS at the HP - Drivers & Downloads website.
I look forward to your reply!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Photoshop - Motion - DVDSP Color Problem

This message is crossposted in the Motion Forum because I'm not sure where the solution is to be found...
I'm putting together a dvd and I wanted to create transition animations to go between the menus. I've run into a bit of a color problem, however. To explain:
I created my main menu as a layered photoshop document (8-bit RGB, NTSC colorspace). I brought that menu into Motion, preserving all layers. I animated those layers in motion so that at the end of the animation they were another menu on the dvd, then I exported the last frame of the animation, brought it back into photoshop, and made everything line up so that it precisely matched the final frame of the animation, then saved that PSD as a new layered document. Finally, in DVD Studio Pro, I brought in the two Menu PSDs and the animated transition.
The problem I'm running into is that the color on the transition animation is washed out and somewhat desaturated compared to the menu PSDs. Rather than the seamless transition from layered menu PSD to animation and back to layered menu PSD, you can see this altered color "pop" on the animation.
Here's what I've checked and tried:
-I've exported the motion project as every codec that made any kind of sense (Animation NTSC, Apple Pro Video NTSC, etc).
-I've brought the Motion project directly into DVD Studio Pro, rather than exporting it.
-Using the color inspector in both Photoshop and Motion, I can see that all RGB values match exactly as they should.
-When I exported a frame of the animation and brought it back into Photoshop to create the second layered menu, the color matched exactly. In fact, I did the alignment using the "difference" layer mode, and there was no color shift at all.
So... any ideas?
Also: I'm going from these layered menus to a video track (first frame matches the layered menu) to another layered menu (matching the final frame of the video track)... that is the most sensible way to have animated transitions between menus, right?
Thanks in advance for any insights.
-W

Well, I found a solution... DVDSP didn't like the image in NTSC, but it seems to work with Generic RGB, provided I redo all of the animation from scratch using the same Generic RGB PSDs. A bit of a pain, but I suppose that's why I did this test after completing only one of the many animations the project will demand.
Thanks everyone for the insights.

Regarding standardization of Colors in Pie chart Categories

Dear BI Experts,
I have an issue regarding Pie Charts in the WAD. When we have 5 categories defined in the Pie chart and each category has got its own defined color.
issue no 1: It is very difficult to go to each cahrt and select the colors for each chart in each category. Is there any place where we can define the colors in common?
issue no 2: When we have the data for all the categories it is doing good. In case of data not available for any purticular category the color defined for that category is coming for the next category. which shud not happen.
Is there any chance of solving this?
Anyone please help me in this concern. Very much awaited.
Regards,
Kishore.

Bhanu,
Sorry about the late response ... connectivity issues....
As for the color issue - you would have fixed colors to each series ... and when there is no data for one of them then that particular series is absent which would mean that the next series would take its place.
Example :
Original query -
4 categories with 4 colors
If one of the categories does not have data then the query would have 3 categories and category 4 would take the place of category 3 and hence the issue of the colors...
I was not able to simulate the same however ....
1. If you had the same data set in Excel - are the colors proper- any Standard data set / BeX chart
2. Is there anyway you can fix the number of categories by way of restricted Key figures etc ? then if that category is present in the query even if there is not data the colors should be maintained.
Arun
Hope it helps...

Problems with Charts

I make an application with Apex 2.2. It works fine.
I've tried to export app and import to Oracle XE.
It works but I've a problem with the charts: they are all empty!
For example, I make a cluster bar chart with one series:
select *
from table(cast(portal_pk_report_vendite.f_chart_shops_line(:P1_TIPI_ANALISI, 0,9,:APP_USER) as portal_table_graph))
The query call a procedure that return an object table with the following columns:
link
description
value
The chart is always empty.
If I manually force the parameters it works and data returned:
select *
from table(cast(portal_pk_report_vendite.f_chart_shops_line(40, 0,9,10) as portal_table_graph))
It seems that it's not able to passa values to chart.
Doing chart debug, items were correctly initialized.
It appens with all charts of any kind.
Any ideas?

I know that there aren't differences between Apex ad XEAndrea,
Oracle Application Express (APEX) is a hosted declarative development environment for developing and deploying database-centric Web applications. XE is a free version of the world's most capable relational database Oracle 10g Release 2 (10.2). So difference is huge!
APEX can run (depending on version) on different Oracle database editions (XE, SE, SEO and EE).
You have problem if your application running on APEX on XE and not if running on APEX on SE, SEO or EE. Am I right?
Question is does it really database (XE) making you problems with charts (what has not much sense to me) or APEX itself?

Defning own color palette for Chart Items

Hello,
i have a requirement for several Cockpits, the values of all diagramms of actual year should have a special color, which is not defined in the color palettes Tradeshow, Streamline or Enjoy.
I don't want to change the color for each chart, i'v already tried the Portal Theme Editor, but i was not able to change color settings for charts.
Is it possible to create custom color palette which i can choose in the global settings in the chart item dialog?
Best regards,
Frank

1. Go to the following directory on the server side Installation Directory \SAP BusinessObjects Enterprise XI 4.0\images
2. Find the file there named as VisualizationConfig.template.xml
3. Rename this file to VisualizationConfig.xml
4. Then edit this file and add the color for the palette as you required (RGB colors are used)
5. Check there are no errors in the config file, otherwise the standard palette is applied – you can define only one Corporate palette, and the palette ID must not be changed
6. Finally, you need to reboot Tomcat after editing the config file.

Color problem in charts

Similar Messages

Maybe you are looking for