Color problem (negative)

Hello,
I have the test version of Pages'09 and I have made a report with it. I wanted to open it with Pages'08 but colors are negative. I mean the black is now white and so on and I don't manage to change that.
Would you have a solution ?
Thanks
Senelya

Yes. That part puzzled me. Too often pertinent information is left out. I see the OS is 10.6.3, Maybe a combo updater is needed. Did the OP update to 10.6.3 thru Software Update? That has been a problem. If so use the combo updater to fix the problem.
http://support.apple.com/kb/dl1017
Walt

Similar Messages

Problems with scanning color film negatives

I am using an Epson 4990 flatbed scanner to scan color film negatives. When I scan 120 film I can during the scanning process that the entire negative has been scanned, but in thumbnails and then in the final scan the picture (image) is smaller than the negative. It is as if the software is cropping the picture. Is there anyway to ensure that the scanned picture is the same size as the negative?

Hello @JGFWilks!
Thank you for posting on the HP Forums!
I can see that the software is not available for your Scanjet G4050 on Mac 10.10. Although the the software is not available ImageCapture should still allow the option for "auto selection"in the dropdown should be "detect separate items" It should then detect your 30 separate photo negatives. When you are in image capture you will want to ensure you press "show details" at the bottom of the window to get all the options. You may also want to try changing the resolution to a higher DPI to see if that helps when scanning the negatives.
Thanks again for posting on the HP Forums! Enjoy the rest of the day!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

Macbook display color problems

macbook, mac os 10.5.8 updated, display color problem. when i try to fix it by color sync. it says:
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
Repair done - 0 out of 2 profiles fixed.
Kindly assist what to do.

Welcome to Apple Discussions!
Pictures would help. A good way to do this is to post them to a free photo sharing site like Flickr and then post a link.
Also, you are in the original MBP section, and I think you need to post your question in the newer MBP section:
http://discussions.apple.com/forum.jspa?forumID=1294
Good luck!

Lightroom 4 color problem

I imported tiff images into Lightroom 4 that were scanned by DigMyPics.com. The color of the images look good on the Windows 7 photo viewer. It looks horrible in Lightroom 4. My monitor is callibrated, the import develope setting is set to "none" , the box is unchecked "apply auto tone adjustments". I think that the windows viewer is showing the accurate color of the scan and LR is not. I don't think DigMyPics would send this awful color. What could the issue be?

monitor NEC 2690 wuxi
eye-one display 2
Original message
From: twenty_one
To: [email protected]
Received: 2/10/2013 12:30:42 PM
Subject: lightroom 4 color problem
Re: lightroom 4 color problem
created by twenty_one in Photoshop Lightroom - View the full discussion
Yes, that certainly looks like a problem with the Lightroom rendering. Skin tones and red in general is clearly off, while Windows Photo Viewer looks good.
I'm almost certain this is a problem with the monitor profile. As troubleshooting, try to set sRGB as monitor profile (or Adobe RGB if your monitor is wide gamut), and see if the difference persists. But try to recalibrate first.
What calibrator and what monitor?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5062403#5062403
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5062403#5062403
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5062403#5062403. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

A color problem in Apple's publishing App

I was wondering if you could help me with this problem，I really need some help，and here it is：
There is a Color problem in Mac publishing applications like Pages and Keynote，including iBooks Author，which really confuse me a lot。
When you use a certain color space（sRGB IEC61966-2.1 in this case）to create some colors with Apps like Illustrator CS6，Indesign CS6 & Photoshop CS6 etc. ，they look totally fine。BUT when you use iBooks Author （V2.0）to create the very same color with the very same color space，colors still look fine in the color panel，and here comes the problem：they look totally lousy in the actual document！！In fact，they look much lighter and faded。（See Image 1&2）
Above：Image 1
Above：Image 2
And this is also terrible with photos you import。（See Image 3）
Above：Image 3
Please tell me what I can do to solve this problem。I know maybe this is some sort of “basic” and “general” knowledge，but I really need your help。And I can't thank you enough if you can provide some effective solutions。

As far as I can see, the colour pallet and how colours are seen in any app on YOUR machine will depend on the computers System Preferences>Displays>Colour - choose your preferred setting.
I suggest first that you ensure that your colour profile settings are the same ( as your computer) in whatever Adobe application or in fact any outside image processor you use.
Creating or using a colour profile in Adobe and having a different profile on your system - will tend to give different colour hues.
A point also to remember is whatever you set up and is transferred to your product... when seen on an iPad may well be totally different again due to peculiarities and contrast / brighness setting of the iPad user.

Pavilion gv laptop colors on monitor color problem

I'm having color problems on my laptop. While the colors on my screen aren't terrible,most of the color/textures appear washed out and muted in comparison to other laptops I own. I've tried adjusting the brightness and calibrating the colors but it didn't fix the problem. I'm not sure what the problem could be. Thank you for your help.

Hey @crawford810 ,
Welcome to the HP Forums!
I understand the colours on your notebook look muted.
Could you please tell me which notebook model you have and the installed operating system? For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number? To see which version of Windows you are using click here: Which Windows operating system am I running?
For an issue like this you will want to test an external monitor to see if the issue is coming from the display, the GPU, or from Windows.
You will want to make sure your GPU and BIOS are up to date. You can download the most recent drivers and BIOS at the HP - Drivers & Downloads website.
I look forward to your reply!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Photoshop - Motion - DVDSP Color Problem

This message is crossposted in the Motion Forum because I'm not sure where the solution is to be found...
I'm putting together a dvd and I wanted to create transition animations to go between the menus. I've run into a bit of a color problem, however. To explain:
I created my main menu as a layered photoshop document (8-bit RGB, NTSC colorspace). I brought that menu into Motion, preserving all layers. I animated those layers in motion so that at the end of the animation they were another menu on the dvd, then I exported the last frame of the animation, brought it back into photoshop, and made everything line up so that it precisely matched the final frame of the animation, then saved that PSD as a new layered document. Finally, in DVD Studio Pro, I brought in the two Menu PSDs and the animated transition.
The problem I'm running into is that the color on the transition animation is washed out and somewhat desaturated compared to the menu PSDs. Rather than the seamless transition from layered menu PSD to animation and back to layered menu PSD, you can see this altered color "pop" on the animation.
Here's what I've checked and tried:
-I've exported the motion project as every codec that made any kind of sense (Animation NTSC, Apple Pro Video NTSC, etc).
-I've brought the Motion project directly into DVD Studio Pro, rather than exporting it.
-Using the color inspector in both Photoshop and Motion, I can see that all RGB values match exactly as they should.
-When I exported a frame of the animation and brought it back into Photoshop to create the second layered menu, the color matched exactly. In fact, I did the alignment using the "difference" layer mode, and there was no color shift at all.
So... any ideas?
Also: I'm going from these layered menus to a video track (first frame matches the layered menu) to another layered menu (matching the final frame of the video track)... that is the most sensible way to have animated transitions between menus, right?
Thanks in advance for any insights.
-W

Well, I found a solution... DVDSP didn't like the image in NTSC, but it seems to work with Generic RGB, provided I redo all of the animation from scratch using the same Generic RGB PSDs. A bit of a pain, but I suppose that's why I did this test after completing only one of the many animations the project will demand.
Thanks everyone for the insights.

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Why do external forms that I open (usually attached in an email) have all type of color problems. I usually cannot even read the document

Hi,
What is the exact name of the desktop app you have? Is it "Acrobat Reader DC", "Acrobat Pro DC" or "Acrobat Standard DC"?
(Previously, your question was posted to the wrong forum - the Reader/Acrobat DC mobile forum.)
If you have the paid product ("Acrobat Pro DC" or "Acrobat Standard DC"), you can contact Adobe Customer Care.
Contact Customer Care
If you have the free product ("Acrobat Reader DC"), Adobe Customer Care will redirect you to the user forum like this one. You just need to wait for someone (who is an experienced user but not necessarily an Adobe employee) to answer your question in the right user forum.
You may also try looking for answers for the same or similar problems by Google search.

Epson 2200 Color problem solved...I think

I have read the posts on the color problems with 10.6 and the EP 2200. I too had the same issues after installing 10.6 this evening. After much teeth grinding and some choice words I set about solving my printing problem.
The Gutenprint driver has the same problems GIMP had. It isn't really printer specific, as in all the options you once had. I would rather have no driver than have this lame piece of software automatically installed. Gutenprint will make the printer run but that's about all it will do.
The solution is pretty easy:
1. Open System Preferences. Click on Print and Fax
2. Select the 2200 (or any printer giving you fits) and click the to delete the printer. Close prefs.
3. Go to the Epson site and download the 10.4 driver, Epson 11832. Install.
4. Also download the 10.6 updater and install.
5. Open System Prefs>Print and Fax again.
6. Click the and select the printer model, in my case Epson 2200.
7. In the drop down window Select Epson SP 2200 not the Epson Stylus Photo 2200 - Gutenprint v5.2.3! The latter being a Jack of all Trades and Master of none.
8. All the print functions reappear as expected.
Do I believe the reports of Epson dumping on the Mac market? Not a chance. Mac has the majority (well over 50% and growing) of the graphic and creative arts market. Most professional photographers I know use the Mac platform and are very enthusiastic about it. Epson couldn't afford to turn their backs on the Mac platform.
With 10.6 I did loose all my custom icc profiles from PS but not PS Lightroom. I also lost the custom monitor profile. I will re-profile my paper/ink/scanner/monitor and consider it a light hit. I'm sure I don't know why this update was so rough on the drivers. I'm also sure that there will be other pains I have yet to discover.
Is 10.6 crap? Probably not. Will I install 10.7 when it arrives? You bet! At OSX worst it is better than Gate's best!!

This is all good info, but for me at least, the real issue is not whether you can get the driver/printer to function (most people seem to be able to get it working) but when you get it functioning under Snow Leopard are there color issues.
Although the printer may work fine for basic documents etc, it is for color-critical photo work that I need my 2200. Many other posts are reporting that although the driver is functioning, there are fairly severe color issues when trying to create high-quality photographic prints using the standard color-managed workflow. This would be rather crippling for photographers and other artists who rely on their 2200.
Maybe those posting here could comment on whether they have been using their 2200 for photographic purposes and whether or not they have seen color issues. I wonder if some people just aren't noticing a problem because they aren't doing color-managed photographic work.
I haven't installed Snow Leopard yet and I'm trying to determine if this is affecting a very small percentage of people or if everyone is having trouble getting proper color from their 2200 since Snow Leopard. So far I haven't seen a single post specifically stating that they they are using the 2200 for high quality photo printing and have had no color issues under Snow Leopard.
Message was edited by: Bazzography

Color problem, black 'noise' on specific colors

Dear adobe users,
At the moment I have a problem with a few specific colors within photoshop CS6, on top of my original colors you'll see a black noise effect. Some effect you'll suspect when you've turned on a different color mode. But i'm working with the normal RGB/8 color modes which shouldn't be a problem. If i save this document to a JPEG and open it with Windows Preview, the color problems dissapear. Funny thing is, if I get my color picker and hover on a black spot on my original document, the right color shows up in my color picker and not the black color I see on my screen.
What can cause this problem? Tried google to find the problem, but no luck so far. Driving me crazy as this isnt really working for me. Thanks for the help so far!
Printscreen of my problem:
Original document (jpeg):
Regards
Marcel

I'm guessing you have an ATI video card and have updated to Catalyst 13.1 (or gotten the WHQL driver through Windows Update).
Catalyst 13.1 has a problem properly running Photoshop CS6's GPU-based Adobe Color Engine. Basically if the red channel reaches 0, all color will be blacked out.
A workaround that retains most of your GPU functionality but avoids the problem is this: Change the Drawing Mode to Basic in the Advanced Photoshop GPU preferences. Restart Photoshop after making the change.
A possibly more acceptable workaround is to completely uninstall Catalyst 13.1, then seek out Catalyst 12.8, specifically, on Adobe's web site. 12.8 works quite well in Advanced mode.
-Noel

Color problem in CS3

I recently had to replace my motherboard and video card (with identiacal cards). This may or may not be related to my problem.
My Photoshop installation now has a definate magenta cast. I am working in sRGB with my color settings set to North America General Purpose 2.
If I set my preview to "monitor" (Samsung SyncMaster 243T) the colors appear correct, but returning to the native program shifts by colors back to the extreme magenta shift.
I can also view the correct colors when using "Save for web or devices"
My monitor is calibrated and I can view images correctly outside of Photoshop.
Any suggestions?

Thank you both for your suggestions.
Just for fun, I recalibrated but got the same results.
However...
I am using a Radeon X800GT video card that has two ports. I had not set up the second monitor yet and didn't have it turned on. When I turned it on, I got the "subscript out of range" warning suggesting that I was trying to send a screen resolution that the monitor couldn't handle.
I used an ATI utility to reset the secondary monitor to the correct resolution. Then when I opened Photoshop, the colors were not correct!
Apparantely, there was a conflict in the video card that was spilling over to affect Photoshop.
Getting the screen resolutions happy on both of my monitors fixed the Photoshop color problem.
Thanks again.

Color for negative Values in ALV Report

I want to change the color for negative values displayed in ALV list diplay report. Eg. -5 in Quantity should be changed to orange. Kindly help me
Thanks

Check the below program and bold one are important ( which is similar to MD05 Traffic lights )
REPORT ZWM_BIN_STOCK_REQ no standard page heading
                    message-id zwave.
D A T A   D E C L A R A T I O N ****************************
Tables
tables :zpwvbap,
         mara,
         marc,
         makt,
         vbap,
         zshift,
         marm,
         lqua.
TYPE-POOLS: SLIS.
Internal Table for Sales order
data : begin of i_vbap occurs 0,
       matnr like zpwvbap-matnr," Material #
       ZZCUTOFF like zpwvbak-ZZCUTOFF," Cutoff Time
       vlpla like zpwvbap-vlpla,
       kwmeng like zpwvbap-kwmeng," Quantity
       vrkme like zpwvbap-vrkme, " Sales Unit
       meins like zpwvbap-meins, " Unit of measure
       end of i_vbap.
Internal Table for final Processing
data : begin of i_final occurs 0,
       date(8) type c,
       matnr like zpwvbap-matnr," Material #
       zzshift like zshift-zzshift, " Wave Drop
       maktx like makt-maktx," Desc
       lgpla like lagp-lgpla, " Pick Bin
       pverme like lqua-verme," Stock at Pick Bin
       prverme like lqua-verme," Stock at Prod Bin
       kwmeng like zpwvbap-kwmeng," Requiremnet from Wave Drop
       vrkme like zpwvbap-vrkme, " Sales Unit
      meins like zpwvbap-meins," Unit of measure
       end of i_final.
Internal Table for Output
data : begin of i_output occurs 0,
     <b> field type c, " Traffic Lights</b>
      zzshift like zshift-zzshift, " Wave Drop
       matnr like zpwvbap-matnr," Material #
       maktx like makt-maktx," Desc
       lgpla like lagp-lgpla, " Pick Bin
       pverme like lqua-verme," Stock at Pick Bin
       prverme like lqua-verme," Stock at Prod Bin
       kwmeng like zpwvbap-kwmeng," Requiremnet from Wave Drop
       vrkme like zpwvbap-vrkme," Sales Unit
      meins like zpwvbap-meins," Unit of measure
       diff like zpwvbap-kwmeng, " Diffrence
       end of i_output.
Work Area for Final Internal Table
data wa_final like i_final.
data : w_zzcutoff(12) TYPE c,
        v_date type sy-datum,
        v_time(4) type c,
        v_fldate(12) type c,
        v_fhdate(12) type c,
        v_pverme like lqua-verme,
        v_prverme like lqua-verme,
        v_diff like zpwvbap-kwmeng.
Variables for new check box
data : v_nverme like lqua-verme.
Internal Table for Pick Bin
data : begin of i_verme occurs 0,
       verme like lqua-verme,
       end of i_verme.
Internal table for Prod Bin
data : begin of i_pverme occurs 0,
       verme like lqua-verme,
       end of i_pverme.
Variables for ALV
DATA: FIELDCAT           TYPE SLIS_T_FIELDCAT_ALV,
      FIELDCAT_LN        LIKE LINE OF FIELDCAT,
      SORTCAT            TYPE SLIS_T_SORTINFO_ALV,
      SORTCAT_LN         LIKE LINE OF SORTCAT,
      EVENTCAT           TYPE SLIS_T_EVENT,
      EVENTCAT_LN        LIKE LINE OF EVENTCAT,
      LAYOUT             TYPE SLIS_LAYOUT_ALV,
      C_TOP_OF_PAGE      TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
      g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
      GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: COL_POS TYPE I,
      P_LIGNAM TYPE SLIS_FIELDNAME VALUE 'FIELD'.
DATA : V_REPID LIKE SY-REPID,
       flag type c.
S E L E C T I O N - S C R E E N *************************
selection-screen : begin of block blk with frame title text-001.
parameter : p_plant like marc-werks obligatory default '1000'.
select-options : s_date for sy-datum obligatory ,
                 s_shift for zshift-zzshift,
                 s_matnr for mara-matnr,
                 s_dept for zpwvbap-zzdept,
                 s_pdept for marc-ZZPRODDEPT.
selection-screen: end of block blk.
parameters : p_check as checkbox ."default 'X'.
ranges r_cutoff for w_zzcutoff.
I N I T I A L I Z A T I O N ****************************
initialization.
V_REPID = SY-REPID.
s_date-low = sy-datum + 1.
append s_date.
S T A R T - O F - S E L E C T I O N ***********************
start-of-selection.
Get the Shift Data.
PERFORM GET_SHIFT_DETAILS.
Get the data from ZPWVBAP Table
PERFORM GET_DATA_VBAP.
E N D - O F - S E L E C T I O N **********************
end-of-selection.
if not i_output[] is initial.
    sort i_output by field zzshift matnr.
Reset the all Fiedcatlog.
    PERFORM RESETVALUES.
Traffic Lights
    PERFORM BUILD_LAYOUT.
Fill the fieldcatlog values
    PERFORM FILL_FIELDCATLOG.
Call the List Function module
    PERFORM CALL_lIST.
endif.
*&      Form GET_SHIFT_DETAILS
      Get the Cutoff Time.
FORM GET_SHIFT_DETAILS.
clear : v_fldate,
          v_fhdate.
if not s_shift-low is initial.
    clear: v_time,
           v_date.
    if s_shift-low = '1'.
      v_time = '2000'.
    elseif s_shift-low = '2'.
      v_time = '2300'.
    endif.
    v_date = s_date-low - 1.
    concatenate v_date v_time into v_fldate.
endif.
if not s_shift-high is initial.
    clear : v_date,
            v_time.
    if s_shift-high = '1'.
      v_time = '2000'.
    elseif s_shift-high = '2'.
      v_time = '2300'.
    endif.
    if not s_date-high is initial.
      v_date = s_date-high - 1.
    else.
      v_date = s_date-low - 1.
    endif.
    concatenate v_date v_time into v_fhdate.
endif.
if not v_fhdate is initial.
    r_cutoff-low = v_fldate.
    r_cutoff-high = v_fhdate.
    r_cutoff-sign = 'I'.
    r_cutoff-option = 'BT'.
    append r_cutoff.
endif.
ENDFORM.                    " GET_SHIFT_DETAILS
*&      Form GET_DATA_VBAP
      Get the data from ZPWVBAP Table
FORM GET_DATA_VBAP.
Get the data from ZPWVBAP and ZPWVBAK Table
if not v_fhdate is initial.
    select matnr ZZCUTOFF vlpla sum( kwmeng ) vrkme meins
                 into table i_vbap
                 from zpwvbap as a inner join zpwvbak as b on
                               a~vbeln = b~vbeln
                               where a~werks = p_plant
                               and   a~matnr in s_matnr
                               and b~vdatu in s_date
                               and a~zzdept in s_dept
                               and b~zzcutoff in r_cutoff
                              group by matnr zzcutoff vlpla vrkme meins.
elseif not v_fldate is initial.
    select matnr ZZCUTOFF vlpla sum( kwmeng ) vrkme meins
                       into table i_vbap
                       from zpwvbap as a inner join zpwvbak as b on
                               a~vbeln = b~vbeln
                               where a~werks = p_plant
                               and   a~matnr in s_matnr
                               and b~vdatu in s_date
                               and a~zzdept in s_dept
                               and b~zzcutoff = v_fldate
                           group by matnr zzcutoff vlpla vrkme meins.
else.
    select matnr ZZCUTOFF vlpla sum( kwmeng ) vrkme meins
                          into table i_vbap
       from zpwvbap as a inner join zpwvbak as b on
                               a~vbeln = b~vbeln
                               where a~werks = p_plant
                               and   a~matnr in s_matnr
                               and b~vdatu in s_date
                               and a~zzdept in s_dept
                               and b~zzcutoff in r_cutoff
                            group by matnr zzcutoff vlpla vrkme meins .
endif.
if sy-subrc ne 0.
    message i000(zwave) with 'No data found for given selection'.
    stop.
endif.
sort i_vbap by zzcutoff matnr.
loop at i_vbap.
    clear : v_pverme,
            v_prverme.
Compare the data with pick method
    select single zzpick from marc into marc-zzpick
                         where matnr = i_vbap-matnr
                         and   werks = p_plant
                         and   zzpick = '01'.
    if sy-subrc ne 0.
      continue.
    endif.
Compare the data from MARC Table with Production Department
    select single zzPRODdept from marc into marc-zzPRODdept
                         where matnr = i_vbap-matnr
                         and werks = p_plant
                         and zzPRODdept in s_pdept.
    if sy-subrc ne 0.
      continue.
    endif.
Get the Material Description from MAKT Table
    Select single maktx from makt into makt-maktx
                        where matnr = i_vbap-matnr
                        and   spras = 'E'.
    if sy-subrc eq 0.
      i_final-maktx = makt-maktx.
    endif.
Get the Pick Bin
    i_final-lgpla = i_vbap-vlpla.
    refresh i_verme.
    clear i_verme.
Get the stock at Pick bin
    select verme from lqua into table i_verme
                        where lgpla = i_vbap-vlpla
                        and   matnr = i_vbap-matnr
                        and   LGNUM = '100'.
    if sy-subrc eq 0.
      loop at i_verme.
        v_pverme = v_pverme + i_verme-verme.
      endloop.
      if sy-subrc eq 0.
        i_final-pverme = v_pverme.
      endif.
    endif.
    refresh i_pverme.
    clear i_pverme.
Get the stock at Production bin
    select verme from lqua into table i_pverme
                       where matnr = i_vbap-matnr
                       and   LGNUM = '100'
                   and ( lgpla = '9595959595' or
                         lgpla = '2222222222' or
                         lgpla = '5555555555' or
                         lgpla = '3232323232' or
                         lgpla = '8080808080' or
                         lgpla = '4040404040' or
                         lgpla = '9090909090' ).
    if sy-subrc eq 0.
      loop at i_pverme.
        v_prverme = v_prverme + i_pverme-verme.
      endloop.
      if sy-subrc eq 0.
        i_final-prverme = v_prverme.
      endif.
    endif.
Compare the unit of measure and sales unit
    if i_vbap-vrkme ne i_vbap-meins.
Get the data from MARM Table ( Unit of measure )
      select single * from marm into marm
                           where matnr = i_vbap-matnr
                           and   meinh = i_vbap-vrkme.
      if sy-subrc eq 0.
        i_final-pverme = ( i_final-pverme * marm-umren ) / marm-umrez.
      endif.
    endif.
Material #
    i_final-matnr = i_vbap-matnr.
Quantity from ZPWVBAP
    i_final-kwmeng = i_vbap-kwmeng.
Unit of Measure
   i_final-meins = i_vbap-meins.
Sales Unit
    i_final-vrkme = i_vbap-vrkme.
Wave Drop
    if i_vbap-ZZCUTOFF+8(4) = '2000' .
      i_final-zzshift = '1'.
    endif.
    if i_vbap-zzcutoff+8(4) = '2300'.
      i_final-zzshift = '2'.
    endif.
    i_final-date = i_vbap-zzcutoff+0(8).
    append i_final.
    clear : i_final,
            i_vbap.
**Difference
   i_output-diff = i_output-pverme - i_vbap-kwmeng.
Traffic Lights Depends on value
   if i_output-pverme > i_output-kwmeng.
     i_output-field = '3'.
   elseif i_output-pverme < i_output-kwmeng.
     i_output-field = '1'.
   elseif i_output-pverme = i_output-kwmeng.
     i_output-field = '2'.
   endif.
   append i_output.
   clear : i_output,
           i_vbap.
endloop.
refresh i_vbap.
sort i_final by date matnr zzshift.
Processing the internal table to get same material with pick quantity
deduction even it for 2nd shift
loop at i_final.
Move the data into work area in order remove #
    move i_final to wa_final.
    clear : flag.
    at new matnr.
      move : wa_final-matnr to i_output-matnr," Material #
             wa_final-maktx to i_output-maktx," Desc
             wa_final-lgpla to i_output-lgpla," Pick Bin
             wa_final-kwmeng to i_output-kwmeng," Order qty
             wa_final-zzshift to i_output-zzshift," Shift
             wa_final-pverme to i_output-pverme, " Pick bin qty
             wa_final-vrkme to i_output-vrkme," Sales Unit
             wa_final-prverme to i_output-prverme. " Prod Bin Qty
Difference
      i_output-diff = i_output-pverme - i_output-kwmeng.
New logic for Only HMR Department
    <b> if p_check = 'X'.
        if i_output-pverme < i_output-kwmeng.
          v_nverme = i_output-pverme + i_output-prverme.
          if v_nverme > i_output-kwmeng.
           if i_output-pverme < i_output-kwmeng.
           i_output-field = '2'.
            else.
Traffic Lights Depends on value
            i_output-field = '3'.
            endif.
          elseif v_nverme < i_output-kwmeng.
            i_output-field = '1'.
          elseif v_nverme = i_output-kwmeng.
            i_output-field = '2'.
          endif.
        elseif i_output-pverme > i_output-kwmeng.
          i_output-field = '3'.
        elseif i_output-pverme = i_output-kwmeng.
          i_output-field = '3'.
        endif.
      else.
Traffic Lights Depends on value
        if i_output-pverme > i_output-kwmeng.
          i_output-field = '3'.
        elseif i_output-pverme < i_output-kwmeng.
          i_output-field = '1'.
        elseif i_output-pverme = i_output-kwmeng.
          i_output-field = '2'.
        endif.
      endif.
      move i_output-diff to v_diff.
      flag = 'X'.
    endat.</b>
    if flag ne 'X'.
      move : wa_final-matnr to i_output-matnr," Material #
             wa_final-maktx to i_output-maktx," Desc
             wa_final-lgpla to i_output-lgpla," Pick Bin
             wa_final-kwmeng to i_output-kwmeng," Order qty
             wa_final-zzshift to i_output-zzshift," Shift
             wa_final-vrkme to i_output-vrkme," Sales Unit
             wa_final-prverme to i_output-prverme. " Prod Bin Qty
Move Diffrence value
      move v_diff to i_output-pverme.
      clear: v_diff.
New logic for Only HMR Department
New logic for Only HMR Department
      if p_check = 'X'.
        if i_output-pverme < i_output-kwmeng.
          v_nverme = i_output-pverme + i_output-prverme.
          if v_nverme > i_output-kwmeng.
          if i_output-pverme < i_output-kwmeng.
           i_output-field = '2'.
            else.
Traffic Lights Depends on value
            i_output-field = '3'.
            endif.
Traffic Lights Depends on value
           i_output-field = '3'.
          elseif v_nverme < i_output-kwmeng.
            i_output-field = '1'.
          elseif v_nverme = i_output-kwmeng.
            i_output-field = '2'.
          endif.
        elseif i_output-pverme > i_output-kwmeng.
          i_output-field = '3'.
        elseif i_output-pverme = i_output-kwmeng.
          i_output-field = '3'.
        endif.
i_output-diff = i_output-pverme - i_output-kwmeng.
      else.
Difference
        i_output-diff = i_output-pverme - i_output-kwmeng.
Traffic Lights Depends on value
        if i_output-pverme > i_output-kwmeng.
          i_output-field = '3'.
        elseif i_output-pverme < i_output-kwmeng.
          i_output-field = '1'.
        elseif i_output-pverme = i_output-kwmeng.
          i_output-field = '2'.
        endif.
      endif.
    endif.
    append i_output.
    clear : i_output,
            wa_final,
            i_final,
             v_nverme.
endloop.
sort i_output by field zzshift matnr.
ENDFORM.                    " GET_DATA_VBAP
*&      Form RESETVALUES
      Reset the all fieldcatlogs
FORM RESETVALUES.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
FIELDCAT_LN-OUTPUTLEN = '0'.
CLEAR: fieldcat_ln-seltext_l, fieldcat_ln-seltext_m,
         fieldcat_ln-seltext_s, fieldcat_ln-reptext_ddic.
ENDFORM.                    " RESETVALUES
*&      Form FILL_FIELDCATLOG
      Fill the Fieldcatlog values
FORM FILL_FIELDCATLOG.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
Trafiic Light
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'FIELD'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 7.
LS_FIELDCAT-col_pos    = '1'.
ls_fieldcat-seltext_L = 'Lights'.
ls_fieldcat-seltext_s = 'Lights'.
ls_fieldcat-seltext_m = 'Lights'.
APPEND LS_FIELDCAT TO FIELDCAT.
Wave Drop
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'ZZSHIFT'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 9.
LS_FIELDCAT-col_pos    = '2'.
ls_fieldcat-seltext_L = 'Wave Drop'.
APPEND LS_FIELDCAT TO FIELDCAT.
Material
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'MARA'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 18.
LS_FIELDCAT-col_pos    = '3'.
ls_fieldcat-seltext_L = 'Material'.
APPEND LS_FIELDCAT TO FIELDCAT.
Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'MAKTX'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 40.
LS_FIELDCAT-col_pos    = '4'.
ls_fieldcat-seltext_L = 'Description'.
APPEND LS_FIELDCAT TO FIELDCAT.
Pick Bin
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'LGPLA'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 15.
LS_FIELDCAT-col_pos    = '5'.
ls_fieldcat-seltext_L = 'Pick Bin'.
APPEND LS_FIELDCAT TO FIELDCAT.
Trafiic Light
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'PVERME'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 16.
LS_FIELDCAT-col_pos    = '6'.
ls_fieldcat-seltext_L = 'Stock at Pick Bin'.
APPEND LS_FIELDCAT TO FIELDCAT.
Stock at Prod Bin
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'PRVERME'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 16.
LS_FIELDCAT-col_pos    = '7'.
ls_fieldcat-seltext_L = 'Stock at Prod Bin'.
APPEND LS_FIELDCAT TO FIELDCAT.
Req from wave drop
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'KWMENG'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 23.
LS_FIELDCAT-col_pos    = '8'.
ls_fieldcat-seltext_L = 'Requirement from Wave Drop'.
APPEND LS_FIELDCAT TO FIELDCAT.
Sales Unit
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'VRKME'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 12.
LS_FIELDCAT-col_pos    = '9'.
ls_fieldcat-seltext_L = 'Sales Unit'.
APPEND LS_FIELDCAT TO FIELDCAT.
Unit of Measure
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'MEINS'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 9.
LS_FIELDCAT-col_pos    = '10'.
ls_fieldcat-seltext_L = 'UNIT'.
ls_fieldcat-no_out = 'X'.
APPEND LS_FIELDCAT TO FIELDCAT.
Diffference
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME    = 'DIFF'.
LS_FIELDCAT-TABNAME    = 'I_OUTPUT'.
LS_FIELDCAT-OUTPUTLEN    = 12.
LS_FIELDCAT-col_pos    = '11'.
ls_fieldcat-seltext_L = 'Difference'.
APPEND LS_FIELDCAT TO FIELDCAT.
ENDFORM.                    " FILL_FIELDCATLOG
*&      Form CALL_lIST
      Use ALV Function module to display output
FORM CALL_lIST.
Top - of - Page
PERFORM COMMENT_BUILD USING GT_LIST_TOP_OF_PAGE[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                =
I_BUFFER_ACTIVE                   = ' '
      I_CALLBACK_PROGRAM                = V_REPID
I_CALLBACK_PF_STATUS_SET          = ' '
    I_CALLBACK_USER_COMMAND           = g_user_command
      I_CALLBACK_TOP_OF_PAGE            = C_TOP_OF_PAGE
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
      IS_LAYOUT                         = LAYOUT
      IT_FIELDCAT                       = FIELDCAT
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_ADD_FIELDCAT                   =
IT_HYPERLINK                      =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IT_EXCEPT_QINFO                   =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = I_OUTPUT
   EXCEPTIONS
     PROGRAM_ERROR                     = 1
     OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " CALL_lIST
*&      Form BUILD_LAYOUT
      text
FORM BUILD_LAYOUT.
LAYOUT-GET_SELINFOS = 'X'.
Now we want a traffic light to say if the Truck is deleted
the variable p_lignam contains the name in IREPO which stores the
value for the traffic light
LAYOUT-LIGHTS_FIELDNAME = P_LIGNAM.
layout-HEADER_TEXT = 'Lights'.
LAYOUT-LIGHTS_CONDENSE = 'X'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form COMMENT_BUILD
      text
     -->P_GT_LIST_TOP_OF_PAGE[] text
FORM COMMENT_BUILD USING    LT_TOP_OF_PAGE TYPE
                                        SLIS_T_LISTHEADER.
data : v_day(2) type c,
         v_mon(2) type c,
         v_year(4) type c,
         v_ldate(10) type c,
         v_hdate(10) type c.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
data: d_date like sy-datum.
clear : v_ldate,
          v_hdate.
Header Information.
LIST HEADING LINE: TYPE H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
LS_LINE-INFO = 'Bin Replenishment report for HMR'.
APPEND LS_LINE TO LT_TOP_OF_PAGE.
STATUS LINE: TYPE S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = TEXT-003.
LS_LINE-INFO = TEXT-003.
APPEND LS_LINE TO LT_TOP_OF_PAGE.
STATUS LINE: TYPE S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = TEXT-003.
LS_LINE-INFO = TEXT-003.
APPEND LS_LINE TO LT_TOP_OF_PAGE.
Get the data ( s_date_low) into proper format.
v_year = s_date-low+0(4).
v_mon = s_date-low+4(2).
v_day = s_date-low+6(2).
concatenate v_mon '/' v_day '/' v_year into v_ldate.
clear : v_mon,
          v_year,
          v_day.
Get the data ( s_date_high) into proper format.
v_year = s_date-high+0(4).
v_mon = s_date-high+4(2).
v_day = s_date-high+6(2).
concatenate v_mon '/' v_day '/' v_year into v_hdate.
clear : v_mon,
          v_year,
          v_day.
Delivery date
if not s_date-low is initial .
    if not s_date-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Delivery date From:'.
      LS_LINE-INFO = v_ldate.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Delivery date To :'.
      LS_LINE-INFO = v_hdate.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
if not s_date-low is initial.
    if s_date-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Delivery date :'.
      LS_LINE-INFO = v_ldate.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
Wave Drop
if not S_SHIFT-LOW is initial.
    if not S_SHIFT-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Wave Drop From :'.
      LS_LINE-INFO = s_shift-low.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Wave Drop to :'.
      LS_LINE-INFO = s_shift-high.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
if not S_SHIFT-LOW is initial.
    if S_SHIFT-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Wave Drop :'.
      LS_LINE-INFO = s_shift-low.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
     CLEAR LS_LINE.
     LS_LINE-TYP = 'S'.
     LS_LINE-KEY = 'Wave Drop to :'.
     LS_LINE-INFO = s_shift-high.
     APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
Department
if not s_dept-low is initial .
    if not s_dept-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Department From :'.
      LS_LINE-INFO = s_dept-low.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Department to :'.
      LS_LINE-INFO = s_dept-high.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
if not s_dept-low is initial .
    if s_dept-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Department :'.
      LS_LINE-INFO = s_dept-low.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
Production Department
if not S_PDEPT-LOW is initial.
    if not S_PDEPT-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Production Department From :'.
      LS_LINE-INFO = S_PDEPT-LOW.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Production Department to :'.
      LS_LINE-INFO = S_PDEPT-high.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
if not S_PDEPT-LOW is initial.
    if S_PDEPT-high is initial.
      CLEAR LS_LINE.
      LS_LINE-TYP = 'S'.
      LS_LINE-KEY = 'Production Department :'.
      LS_LINE-INFO = S_PDEPT-LOW.
      APPEND LS_LINE TO LT_TOP_OF_PAGE.
    endif.
endif.
ENDFORM.                    " COMMENT_BUILD
      FORM TOP_OF_PAGE                                              *
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = GT_LIST_TOP_OF_PAGE
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.
      FORM USER_COMMAND                                             *
FORM user_command USING r_ucomm LIKE sy-ucomm
            rs_selfield TYPE slis_selfield.                 "#EC CALLED
CASE R_UCOMM.
    WHEN '&IC1'.
      read table i_output index rs_selfield-tabindex.
      SET PARAMETER ID 'MAT' FIELD i_output-matnr.
      SET PARAMETER ID 'WRK' FIELD p_plant.
      if not i_output-matnr is initial.
        call transaction 'MD04' and skip first screen.
      endif.
ENDCASE.
ENDFORM.
the above code i mentioned 1,2 ,3 values ,1 will have green color,2 will have yellow color,3 will have red color.
Thanks
Seshu

IPad Air color problem - blues look purple

I just upgraded from an iPad 2 to the iPad Air, and right away noticed that anything that should be blue is clearly and distinctly purple. It's most noticeable in things such as the Facebook app and links in Safari. At first I thought I could live with it or adjust to it, but it's kind of driving me crazy. Compared side by side, the difference in colors is extremely obvious.
My questions are a) is anyone else having this problem, and b) is it worth taking it back and getting another one to see if the screen is any different, or are all the displays at this point going to have this same basic color temperature?

So, is this a universal problem or not?! Mine has the same coloring problem. In Safari, e.g., on Macsurfer.com, all the blue underlined links are *purple*!!
Sure enough, when you tap on one--i.e., a visited link--it changes to a deeper purple, showing it's been visited. But it's incredibly disgracing to go to a site and see all the NEW links in PURPLE!!
Any fixes other than return? And , on a return, what's to say that the next one won't have the same problem--or worse, the other displays issues that have been mentioned.
Incidentally , should the background color of a *white* page in iBooks look *gray*?! Alas, it does!

Photograph Color Problem

Hi! I have a color problem with pictures. I have two G4's running OSX 10.3.9 and the same version 6 of iPhoto. The same picture is in both computers and the color looks the same on both computer's monitors. When I print to my Photosmart printer connected directly to the printer the picture looks fine but when I print through the network to the printer from the other computer the color isn't right. Both computers have the same print software/drivers for the Photosmart printer. Any ideas on how to resolve the problem? Tom

Hi! I reinstalled the Printer software with the newest version and solved my problem. Tom

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. Pls help

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. I just download the recent trail version of Iworks and install it. The first document I opened it was ok. When I open the second one the problem appear again and stayed. Pls help

This behavior was described many times.
In every occurrence,the operating system was an uncompleted one resulting of the use of Software Update to update the operating system to 10.6.2, 10.6.3, 10.6.4, 10.6.5, 10.6.6, 10.6.7.
In such cases, the solace was to apply a combo updater.
As you are using 10.6.7, download and apply the combo 10.6.7 :
http://support.apple.com/kb/DL1361
After that, run Software Update which will urge you to apply :
Snow Leopard Font Update
Yvan KOENIG (VALLAURIS, France) dimanche 29 mai 2011 21:15:58
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Color problem (negative)

Similar Messages

Maybe you are looking for