Color problem prints from camera only

I have a Sony DSC H2. It shoots great photos. When I import them into iPhoto, they look great, and they look terrific as desktop backgrounds and computer slideshows. When I print them, using Canon i960, the photos are darker, more saturated and not so clear as on screen.
So, it must be the printer????
However, when I have scanned some photos into iPhoto and then printed them, the printed photos are excellent, looking exactly like the original scanned photos.
How can I get my camera's photos to print so that they look like what is in iPhoto?
I have taken a look at Color Sync and when the camera is connected, it is the default, using sRGB profile. However, when it is disconnected, the default shows my old Olympus that I no longer use. I cannot find any way to delete its profile.

Beverly:
the default shows my old Olympus
Where is this being displayed? In the Profile pane of the ColorSync application window? If so it should give the location of where that profile file is located so you can go to it and delete it.
I had similar problems with my i850 printer. In the Advance section of the Print window under the ColorSync section tyou can select Lightness increase under the Quartz Filter menu.
Under the Color Options section you can select ColorSync as the correction mode instead of the BJ Standard to see if that will make any change. If you find the right combination you can save it under the Presets menu as a custom preset.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.8) 22 LCD Display, 200G & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

Similar Messages

Color problems printing from InDesign CC 2014 (and CC)

When I print an ad I'm working on from InDesign, the color is off by a lot. If I save the doc as a pdf, it prints correctly from the pdf. If I print from the same InDesign doc on another machine, it prints fine. The problem is not only with this document. Using Bridge I have synched the color, restarted the computer, reinstalled InDesign CC 2014, trashed the Preferences—basically I've done everything listed on the InDesign printing troubleshooting page. Since the documents print correctly from another machine (all the settings are the same), I shouldn't have to use a work-around. I can't be making a pdf every time I need to print from InDesign—which is all the time. Any help appreciated.

Are you using the same printer and driver on both machines?

Color problem printing from iBook G4

having problems printing photos from an iBook G4 (10.3.9). The colors come out a bit over-saturated and muddy.
The same photos printed from my G5 Quad (10.4.6) come out looking fine.
I have used the iBook with a Canon ip6600 and ip6000 pixma photo printers and tried printing from iPhoto 5.0.4 and InDesign CS.
anyone else having this problem or know of a solution?

I have no idea, either.
Try these generic fixes (before reinstalling OS X):
Download the Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD -- or, put in your install DVD and restart while holding the c key. DO NOT continue the installer - instead, find Disk Utility in the top (Finder) menus and use it to repair the hard drive.

I am having trouble printing to an Epson XP600. It is a new printer and it has been replaced because we thought it was the printer. Basically, when I print from Excel, only color will print.

I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?

Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
"Something is wrong
We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
Same message if I cut and paste the link.

Problems printing from iPhoto 6: Page setup & Preview

I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
G5 2G Dual PowerMac 2yr old. Mac OS X (10.4.4) Canon i950 printer

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Different Colors when printing from Photoshop and InDesign CS3

Different Colors when printing from Photoshop and InDesign CS3
I have the following problem:
When printing from Photoshop or InDesign to a PostScript printer, Adobe recommends to let Photoshop handle the colors (I use the German version, so I don't know the exact term used, it changes slightly in all CS3 apps anyway).
The manufacturer however told me to let the PostScript printer handle the colors.
When I chose this option in Ps's print dialog and then choose ISO Coated as the printer pfofile, the results are fine.
But when I place the exact same image in an InDesign file and print from InDesign or export to PDF and print via Acrobat, again using "Printer handles colors", the results are the exact same as if I had used Ps and chosen to let Ps handle the colors (way too saturated and a bit too red).
·Photoshop CS3
·InDesign CS3
·Test image is a TIFF in CMYK Fogra 27 Coated (which is also the working color space in Ps and ID.
·Printer: Xerox Docucolor 3535
·Printer profile: ISO Coated
How can I make sure the printer handles the colors in other CS3 apps than Ps? I tried it with ID's print dialog (translated from the German version: Color Management > Options > Color Handling: PostScript-printer decides colors).
Thanks a lot!

RE: "You don't indicate what Xerox printers you have"
In my first post I named it, is that the information you need?
Docucolor 3535 using Splash 3535
That's interesting, so I have to find a way to turn off the printer's Color Management function? I mailed them, hope they can tell me how to do it easily. They usually just tell me to not use any profiles and so on, but that's the general rule in this area, I'm really tired of hearing it. Everybody seems to think profiles and LAB mode are nuclear science and I should stay away from it.
Anyway, the test image I'm using is a simple photograph (size A3, 300dpi), so no transparencies at all. I'm placing this image into an equally large ID file and print it from ID, then export it to PDF-X/3 and print it from Acrobat. Hope that helps.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Problems Printing from Epson 2400 in Lightroom 2.3

I'm in the process of switching over from a PC to a Mac. I've gotten lightroom running and transfered all my photos over. But I'm having two big problems printing from my Epson 2400.
*8.5x11 prints are offset. The top of the picture starts about an inch lower than it should, and the bottom typically gets cut off.
*Lightroom refuses to print 4x6 prints. It says it's printing, and the paper feeds in, but then the printer just spits out a blank page.
I'm using the most current version of the Epson 2400 driver that I could find on the Epson web site.
[Update] I used iPhoto 9 to print out some pictures, and they came out fine. So this seems to be a lightroom issue or a conflict between the lightroom/epson drivers.
Any help would be greatly appreciated.
Thanks!

Further update. It appears that I can print perfectly from another account on the same mac. But the account on which my catalog resides doesn't work at all. Could my catalog have been corrupted when I transfered my photos and catalog over to the new mac from the pc? Is there any way that I can fix it? (I have tried optimize and relaunch; no luck.)
I could -- as a last restort -- kill the catalog and reimport all my thousands of photos, but wouldn't I loose the keywords and adjustments?
Any help would be greatly appreciated!

Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

Dear Sir or Madam:
I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
I have a HP Officejet 6500 E709n Series printer.
I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
Are there any software updates to correct this problem?
Please reply back soon.
Thanks.
Sincerely,
Etow

Welcome to the forums Etow,
I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
If the above does not help, try using Firefox or Internet Explorer to print.
Have a great Friday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems printing from a Macbook Pro on a Kodak ESP7

Hi,
I am having problem printing from my Mac to the Kodak. I have connected the mac to the printer through the settings as it can see it. However, when I come to print it it says the printer is not responding and to check if it is turned on and properly connected. I have tried reloading the printer etc but still cant get it to work. I fired up my old windows laptop and that will print fine wirelessly so it can't be my BT Hub for the internet.
Any suggestions would be appreciated as I dont want to go and have to buy another printer.
Thanks for suggestions.
Matt

Using the OS X built-in network printing protocols
requires a CUPS driver. Check on Brother's site to
see if they now have a CUPS driver for your model,
or you can try the open source hl1250 driver from:
http://www.linuxprinting.org/macosx/hl1250/
Unfortunately, I don't have an Intel Mac, so I don't
know if any of these power PC drivers will work for
you.
Please let us know.
I was told by a friend that the drivers are already built into the OS X 10.4.3, I hooked up the printer directly via USB and indeed it worked just fine. But, as I stated before, I just can't get the **** thing to work when the printer is connected to my PC and I try to print through the network.

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

Problems printing from Adobe 9

Hi, I am having problems printing from Adobe 9. I can open documents OK but when I try to print them it takes me through the normal print screens, then when I press print it says unable to print document followed by page not selected.
I have also try to delete Adobe 9 and reinstall but when I come to reinstall, I have to click on the grey box at the top of my screen to agree to allow the instillation to take place and everything just freezes up and I have to ctr alt del to move on.
Everything was working fine until the last couple of days
Any help would be much appreciated

My problem is the printing will eventually happen but I have to wait for as long as half an hour. What gives? Are there worms in the Acrobat 9 product? How can I resolve this problem?

HP LaserJet Pro 100 Color MFP M175nw - Problems printing from Mac laptop

Hi
I have never managed to get my prnter to prnt wirelessley from my laptop (Mac Book Pro - (OS X Version 10.6.8). It will print when connected via the USB cable however when I try to print wirelessly, the printer dialogue indicates that the printer is offline. Both of our iphones will print wirelessly from the printer.
Please help!

Hi rachelwallace,
Not sure what happened there. Should have gotten a blue wireless light when connected to the printer's network.
You could restore the printer's defaults and try one more time.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0.
Try the previous steps for setting up the Adhoc to Infrastructure connection.
If you are still having issues and you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Printing a Configuration Report.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page. That way you will know that the printer is now networked.
Since the software is already installed, all you have to do now is add the printer on the Mac.
Click the Apple icon ( ), and then click System Preferences.
Click on Print and Scan.
Click on the + sign.
Highlight the printer in the list.
Click on the add button.
Test the printer.
In case you don't have a Ethernet cable you may try the wireless direct setup.
On the printer, touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the Mac, click on the Airport and select the printer from the list to connect to.
Then open Safari and type in the IP address for the wireless direct (192.168.223.1) for the printer in the address bar. (don't worry about the light on the printer)
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Click on the Airport and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Then add the printer on the Mac.
Test the printer.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Color problem prints from camera only

Similar Messages

Maybe you are looking for