Color profile changes when I wake my computer up.

I'm using the first 15" unibody model, this problem doesn't happen every time I wake my computer up but only has happened when I wake it... The colors will look all off whites will be almost blue... then I open up display preferences and click on the "color" tab and the color goes back to normal... any ideas?

Actually I have the same problem. And I cannot predict when this would accure again. When this happens, I just go to preferences and it's fixing automatically.
I do not think the hardware has any problem, though
I think it is because of Leopard. Perhaps, there is a bug somewhere. By the way, I know that there is a problem with the latest iWeb, which makes images brighter upon publishing (maybe these problems are interconnected). Also, I experience brightening of Safari from time to time!
In menu I have only two color profiles, and I had problems only with one (The Native one which I cannot delete). Today I made another Native color profile. Will use it and see what's on.
Anyway, it would be great if an Apple specialist could tell his/her opinion on the issue.

Similar Messages

  • Macbook pro retina color profile changes when switching from integrated to discrete

    Late 2013 macbook pro retina color profile changes when auto switching from integrated to discrete graphics card. Problem started after updating to 10.9.3

    Same here. Really annoying because I have my screen calibrated for photo editing, which makes it much warmer than the default color profile. A lot of websites cause the graphics cards to switch for a couple of seconds, which causes the profiles to switched back and forth a few times, everytime. Really annoying, and dissapointing to see, considering Apple released like a hundred .3 betas.
    You can use gfxCardStatus to make it stay on one graphics card over the other... Just remember to change it back when you're using a program that actually needs the descrete card.

  • When I wake my computer up from sleep all the Mail and Calendar accounts are offline?

    Now that I have upgraded to Mountain Lion, when I wake my computer from sleep all of my Mail and Calender accounts are offline. This includes Gmail, AOL, and iCloud accounts. The connection doctor in Mail says that Mail can connect to the internet but puts red dots next to all of my accounts stating that connections to both the IMAP and SMTP servers could not be made. This issue has shown up only after upgrading to Mountain Lion, and the only way to resolve it seems to be to manually quit and relaunch Mail and Calender at which point everything goes back to normal until I sleep the computer again. Any ideas?

    Further to my previous post... I think I may have stumbled uppon a solution.
    Summary: When I fixed a problem with dictation, mail started working again.
    Background: I noticed that after upgrading to 10.8.1 the dictation feature no longer worked. When I pressed [fn] twice the dictation bubble would appear, three dots in it would shake and then it beeped. No dictation. I searched for a solution, tried it out and dictation worked again. Then, this morning I opened up my Mac and mail sucessfully downloaded without having to restart mail.app!
    Solution: This is a fix for dictation issues so don't blame me if it messes up your perfectly working dictation! However, it appears to have fixed my mail problems:
    Locate and delete the file: ~/Library/Preferences/com.apple.assistant.plist (Finder’s Go and press and hold Alt option). Then restart your Mac, turn off Dictation (Apple > System Preferences, click Dictation & Speech, and then click Dictation) and reboot your Mac a second time and try again.
    The original thread is here.
    So, a random "solution" with beneficial side effects! Let me know it works for you.
    #Solution #Dictation #com.apple.assistant.plist
    #MBP #mail.app #10.8.1 #6.0 #not working after sleep #IMAP #Mountain Lion #Gmail #iCloud #Offline

  • Monitor Color Profile Changes after FUS

    My monitor color profile changes after fast switching users, and then I cannot change it back in the prefs for display-color. Attempting to choose (restore) my chosen calibrated color profile does not work.
    The only solution is restarting. Loging out and back in does not fix it, only a restart.
    What could be causing this?
    TiBook 867 1GBram 10.4.6   Mac OS X (10.4.6)  

    Does this page contain anything useful?
    (16209)

  • Color profile off when importing motion proj into FCP

    Color profile off when importing motion proj into FCP. Is there a way to set the profile?
    I deleted preferences in FCP.

    No, profile do many things. It is a color space. It allows different apps and systems to view colors the same. Also fcp typically works in a tub color space not rgb.

  • Sudden color temperature change when opening some programs

    I got this sudden color temperature change when I open Photoshop, Maya and a few other games. When I quit the programs the color goes back to normal. It first started happening once a while and I didn't really notice, but now it's become a regular thing... I think it begun after upgrading to Yosemite. It's quite uncomfortable to my eyes but it's bearable. I'm just concerned whether it's a sign for something worse. Please please help!
    I took photos of before and after the color change, basically it becomes much brighter and more blueish.

    Did you ever find a solution for this? It recently started for me too, and it's already getting on my nerves First I thought it was because of dynamically switching the graphics card but unfortunately it happens when I use it on an external monitor only (and thus is locked to the Radeon card)...

  • For the past 2 weeks when I wake my computer I get a white screen in front of my background

    for the past two weeks when i wake my computer from the sleep mode, I have a white screen in front of my background and the hard drive spins like I have restarted my computer.

    Could be any number of things. What user trobleshooting have you tried? Restart (power off/on) reset, hold the sleep/wake and home buttons together until you see the Apple logo and then release. See if it works after the phone restarts. Next is a restore from a backup (make sure you made a current one), then restore as a new device, which deletes all data from your device. If it doesn't work after all that, then make an appointment at the Genius Bar at the local Apple store, it is probably a hardware issue.
    I have seen something similar which is generally diagnosed as a hardware issue.

  • How do I change the appearance of password page on Yosemite? Not my desktop or screen saver but when I wake my computer up and put in my password. The Yosemite colors and images are awful! Thank you.

    Appearance of Yosemite password page - how to change it from the automatic one?
    I can't remember what previous operating systems showed at this point but I do not remember being disturbed by it every time I woke my computer up as I am now!
    It's not my desktop or screensaver but when I wake up my computer and am asked for my password.
    Thanks.

    This is Fiona who asked the question. It's now been pointed out to me that the image is actually my desktop photo blurred. From close up I just saw contorted colors and blurred lines and hadn't linked it to my desktop photo!
    Still would like to know the answer because I hate it. Any ideas anyone?

  • Color profile changed in LR 5 installation?

    Hi,
    I installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
    The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
    Embedded:  Adobe RGB (1998)
      Working  sRGB  IEC61966-2.1
    What would you like to do?
    -Use the embedded profiel (instead of the working space)
    -Convert documents's colors to the working space
    -Discard the embedded profile (don't color manage)
    My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB.  This did not happen before.
    Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos?  I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
    Thank you,
    Gloria

    When (if) LR asks you if you want to send a copy or an original, what are you chosing?

  • Color calibration change when opening certain apps in OSX 10.8?

    Hey guys.
    I've noticed something weird when opening certain applications in Mountain Lion. For one thing, whenever I open say Final Cut X, the entire color gamut changes on my display. It doesn't look bad or anything. It's almost like the computer is changing color calibrations... like when you used to be able to select Adobe RGB in the display preferences in OSX 10.6. Anyone know if this is an intentional thing when using pro applications? Because I also notice it when I open up iPhoto and when I start "screen recording" in Quicktime.
    - Anthony
    15" MacBook Pro (early 2012)
    2.2GHz Intel i7, 8GB RAM

    I recently started noticing the same issue after upgrading to Moutain Lion. The screen will change from a warm tone to a cooler bluish tone. I think it has to be a bug, as I've had the MBP for over a year running Snow Leopard and never noticed this. I hope there is a fix on the way as this is no good for editing photos and graphic work.
    Dan

  • Screen color settings changes when certain software is launched.

    Since today I noticed the screen color settings of my Macbook Pro 17" (beginning 2011 model — Running OSX 10.8.4) is changing when certain software is launched. In this case, Indesign CS6.0 gives a strange blue hue over my screen, but when I check my screen color settings, nothing has changed, everything is set the same as when I don't run the softwares that change my screen color settings. I don't recall changing any settings that could have triggered this action. I didn't change any settings in Indesign CS6.0. I do regularly use CleanMyMac 2 to clean out my computer, maybe this has changed some settings? How can I change this back to normal? Google didn't help me neither.

    Ah right, don;t use laptops much and always forget about that one, good catch. Switching graphics cards would definitely have an effect.
    Just remember with that unchecked you will decrease battery run time so you might want to switch it back on when you are not doing graphics and you are on battery.
    regards

  • Raw to HDR color profile changes

    I am processing a series of Nikon NEF (Adobe RGB) bracketed files to a single HDR photo using Bridge's Tools>Photoshop>Merge to HDR PRO.  This works fine, except the resulting file is now sRGB. How can I keep the color profile from changing during this one-step process?

    When it comes to color profiles it is over my head.  There are some very smart people on the photoshop forum regarding this subject.  I would post there also for a better chance of a timely answer.

  • Display color profile bug when using the fast account switch from a guest account to an admin account (and vice versa)

    Hey,
    I'm sometimes using a guest account on my MBP (unibody late 2008 2,4 GHz Core2Duo, 4GB DDR3 running OSX 10.9.4 on an OCZ 128GB SSD) for a more distraction-free working space and I noticed right away a disturbing bug:
    Using the fast account switch (upper right hand corner of the screen) in Mavericks from an admin account to log into a guest account (or vice versa) produces, after the fancy rotating cube animation, some strange distortion of the desktop background happens (lasting approx. 2 sec.). After that the color profile of the display is changed into an usable but ugly one, which is disturbing while working with pictures. When checking the color profile in the pref pane, the standard "display" profile is said to be active (it's the one I use) but still the colors aren't the same. Selecting another profile and re-selcting the desired one doesn't fix the problem. Switching back to the other account with the fast switching leaves the colors altered. Logging out and deleting the guest account seems to the problem for the remaining admin account. Rebooting  and logging in to either of the accounts (admin or guest) from the standard account selecting page at booting shows the normal color profile.
    Is it a general bug or is their anything a can do to prevent this problem (other than never using the fast switching)?
    Thanks for your advice.
    Mael

    I cannot agree more with your comments! What a way to frustrate your customers!
    I have been having an issue with iCloud on Mac where it kept asking me for my password and sometimes would, sometimes would not continue to access my iCloud mail. Today it just refused to connect to iCloud mail.
    I looked in the Mail, Contacts and Calendars in my MacBook Pro settings and discovered that 2 iCloud accounts were present. One with my original Apple ID (a gmail address) and a second with my new iCloud email ( an @me.com address). Having deleted the second account, using the new @me.com address everything is working fine.
    So from my viewpoint when I moved over to iCloud I was asked to sign in with my Apple ID (the gmail address) then to create an @me.com address. However, as far as I can see all sign ins to the new @me.com account on Macbook, iPhone and iPad need to be done through the old Apple ID (the gmail address). Is that confusing and just plain crazy???
    Further, after creating the new @me.com address I soon found out that this is apparently now forever bound to my old Apple ID and cannot be changed. I mean why can't I delete the iCloud account and start anew with a different @me.com address??? Also, as everybody using iCloud must create an @me.com address why on earth can I not get rid of my old gmail address and have my entire Apple ID accessed through the new @me.com address? Creating a whole new Apple ID will not solve this as we are unable to transfer purchases between accounts.
    Apple products are great IMHO, but they do seem to not think things through in a very big way sometimes......

  • Color space change when using photoshop elements plug in

    When I select photo and edit with photoshop elements, Aperture makes a copy of the file as expected, but I can see the image color/hue etc. has changed, why?  Is there some setting I am missing?  The color of the image shouldn't change, should it? Just doesn't make sense!

    Where do you see the color change of the copy?
    In the thumbnail or preview before it is send to the external edtor?
    When the image is opened in the external editor?
    Or after it is send back from the editor?
    I do not see any color changes when I use PS CS5; it may help to see a screenshot.

  • Why do colors slightly change when copying from Illustrator to Photoshop?

    I want to copy a object from Illustrator and paste it into a Photoshop document with the same color mode and profile.
    When I use the Eyedropper Tool on the pasted object in Photoshop the color seems to be slightly off.
    Both the Illustrator and the Photoshop document have their Color Mode set to RGB
    Both Applications are using synchronized color settings.
    This also happens when the object is dragged or Placed. It does not happen when copying from Photoshop to Illustrator.
    Could there be a problem with my color management settings? What actually happens to the color information, when it is copied from one application to another?
    Thanks for any help.

    Why the heck are people still using these nonsensical hexadecimal HTML numbers?
    Since some decades we got used to describe RGB values by decimal numbers 0...255.
    Both your value sets are practically the same, but how they were converted from one
    to the other, that requires an investigation, how Adobe workflows are distributed
    between California and Bangalore.
    Best regards --Gernot Hoffmann

Maybe you are looking for

  • Genius unknown error occurred (4010)

    Every time I try and use the genius feature on itunes 8 the following error is displayed. 'Genius results can't be updated right now. An unknown error occurred (4010). Please try again later' Having read loads of other posts with this same issue the

  • Find the SAP Script name for the Output type RD00 and Appli V3

    Hi Gurus, My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification. Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ? Regards paul

  • I have an acrobat pro subscription but pdf pack is not subscribed on acrobat reader for ios

    Why does pdf pack not appear as subscribed on ios when I thought this was included in the acrobat pro subscription?

  • REGARDING DELETION OF INCLUDE

    HI  folks, I created include in a program then when i want to delete the include it gives an error like this "Include cannot be deleted because references exist" waiting for ur reply, regards,

  • Choosing Time in Calendar App

    Does anyone else feel like setting the start and end time in the Calendar App is a bit too much like playing "Showcase Showdown" on the Price is Right? It's really cool looking but not very easy to quickly put in a start and end time when I am in a m