Color profile when Importing D200 NEF

Hi there,
I'm a new user for Apple Aperture. I noticed all the NEFs imported from my also new D200 have Adobe Profile as color profile even thou I have set in D200 as sRGB. I have also set the camera to output RAW plus large JPEG. The JPEG file does say sRGB but the NEF says Adobe RGB.
Thanks in advance.

A raw image itself doesn't have a colour profile. What it does have is a 'hint' as to what colour profile should be used when creating an image from it.
In Aperture's case, it uses an internal representation that is large enough to hold all the other possible colour ranges, and then you get to pick which one is used when you export the image to another format (TIFF, JPEG, etc).

Similar Messages

ACR not saving color profiles when saving out to TIF...

The Players:
ACR 4.6, PS CS3, Mac OS X, MacBook, Nikon D200
The Problem:
ACR does not seem to be saving my color profiles when I work on my Nikon D200 NEF files. After saving them out as TIFs and opening them in Photoshop CS3 - files read as "Untagged RGB" and the colors are definitely way off from what they were saved as in ACR. Frustrating!
The Request:
Thank you for any help - trying to get a job done!
Best,
Paul

Paul,
You need to update your Photoshop to version 10.0.1 ASAP. You're also two versions behind in the OS; 10.5.6 is out.
If you do not know how to trash Photoshop's preferences, check out the FAQs in the Adobe Photoshop Macintosh forum:
http://www.adobeforums.com/webx/.3c057d1b
To trash Bridge prefs, hold down the Option key as you relaunch Bridge, then check the boxes in the ensuing dialog box.

Disappearing color profile when saved for the Web

Hello.
I have a problem with the “Save for the Web” results using Photoshop CS6 running on Win 7 x64.
My photos are already in 8 bits and in sRGB and when I save for the Web I check the option “embed color profile”, uncheck “convert to sRGB”, metadata to “copyright and contact info”.
When I open the resulting photos in Photoshop, everything is fine as it recognizes the embedded color profile. Same thing when I open these files in Firefox, Safari or Chrome: the colors are correct.
Now, when I right-click on a file in the Win Explorer and look its properties, the line about the color profile is blank, as if there wasn't any. This doesn't bother me but the problem appears on my Website created with Joomla and using for the display a module, Responsive Image Gallery, which creates resized copies of the photos. At this point the copies have completely lost their color profile. I entered in contact with the module's support and they assured me that it preserves the embedded profile, so I come here to gather some information about how this “Save for the Web” embeds the color profile because may be I just didn't understand how it does and if it's different from the “Save as” way.
The fact I can't see the profile through the Win Explorer makes me think Joomla's module doesn't either.

Incredible how much gballard's site is famous! Lol. I use it for a while now and checked again right now with the three Web browsers and everything is all right.
As indicated in my first post, when saving for the Web I checked the “embed color profile” option. I already resized the file and converted it in sRGB first in Photoshop.
Yes it's pretty confusing to see some software not able to see the color profile when the file is saved with that option.
To illustrate, here are three screenshots from Windows' file browser => right-ckick on the file => properties => details:
Opening that “saved for the Web” file in PS, it's ok, the CP is recognized.
Opening it directly (from the file browser => “open with”) in Web browsers: ok in Firefox, Safari and Chrome (CP recognized in all).
Copying that file in my working site on localhost (no modification), integer it in Joomla's module gallery (which is CP aware) and then opening my site on localhost with Web browsers: ok in Firefox (because it considers a non-tagged file by default as beeing sRGB), NOT OK in Safari neither in Chrome.
Now, if I do the same with the “Save as” version of the file with embedded sRGB CP:
PS: ok
Opened directly in Web browsers: ok in the three cases
Opened in Web browsers through my Joomla site on localhost: OK IN ALL THREE BROWSERS
Good point gator_soup: I'll post a bug report. I'm new here on the forum and thought Adobe's staff would post here.

Color profile when changing from RGB to CMYK

I prefer to work on images in RGB then change to cmyk once I'm sure i won't need to run any more effects or filters on them. When I save an image the first time, I have the option to embed my color profile with the image. It embeds the RGB profile... the only option as long as I'm working in RGB. What I've noticed though, is that after converting to cmyk, I don't get any warnings or other indication that it needs me to embed the color profile. I need to do a save-as in order to get back to that option.
So the question is... does Photoshop automatically switch to my default CMYK color profile when I convert to CMYK? So when I save, it's now using the CMYK profile?

Save your original RGB file.
Then, RGB file > Edit > Convert to Profile (with CMYK#1) > Save As...
This creates your first CMYK file.
Then, back to original RGB file > Edit > Convert to Profile (with CMYK#2) > Save As...
This creates your second CMYK file.
Then, back to original RGB file > Edit > Convert to Profile (with CMYK#3) > Save As...
This creates your third CMYK file.
In all cases, be sure you have "Embed Color Profile" checked at the bottom of the Save As dialog. When naming a file, it's handy to include some sort of indication as to the color space.
In the end, you have four files: 1 RGB file, 3 CMYK files.

How to set color profile when exporting a RAW file version as a JPEG?

I import my raw files to Aperture and when exporting as a JPEG I want to specify a color profile of sRBG. I cannot see how to set the color profile for the export. Does anyone know how to do this?

When you go to export versions, edit the presets, and there is a drop down box that lets you select the profile.
I'd suggest picking up the Aperture book by Luna, Long, and Harrington. Lots of great info there.

Mountain Lion change color profile when use discrete video card

MacBookPro mid 2010. Update Samsung SSD 830.
Mountain Lion 10.8.2 just installed (new installation).
Reset PRAM and SMC. Done. No result.
Try with GfxCardStatus. No result.
When the system uses the discrete video card changes the color profile.
I'm not the only one with this problem.
Someone managed to solve the problem (really)?
I DO NOT ACCEPT COMMENTS OR ANSWERS USELESS.
Sorry, but slightly altering after losing three hours in forums where no one ever answered ...
Thanks.
Stefano.

Let's see...
Sounds like you're running into an expected issue if you make an alias to removeable media. The same thing would happen if you made the alias to a folder on a DVD-R disc or CD-R. If you eject the original, you disable the alias.
If you copy the entire SD card volume to your drive, the PRIVATE package should copy across. Then, as a folder on your hard drive rather than a volume on removeable media, you could make an alias to the STREAM package for quicker access later.
I'm pretty sure that Handbrake, like Prmeiere Pro, can see the MTS files directly. That is, it's not dependant on the other folders in the PRIVATE directory sturcture. As such, you could copy the contents of the STREAM package to another folder on your drive. Just be mindful of the default MTS file names if you're using more than one SD card (you don't want to accidentally copy 00001.MTS from one card over 00001.MTS from another card).
As long as Handbrake sees MTS directly, you could even rename the MTS files after you've copied them.
On a side note, I almost always archive my SD cards with the data structure intact. More often than not, that file structure is important to corretly access the video stored within that structure. If something unexpected happens while working with the MTS files, it is good to have the original file structure to go back to. Although, SD cards are getting to be so low cost that sometimes I just label the SD card and store it for archiving.
-Warren

PDF color changing when imported into InDesign 6

I am importing a customers pdf into InDesign 6. When I do the import the color is changing from the original PDF colors. The original color in the pdf is 0/95/100/29 and when imported to InDesign 6 it becomes 21/98/100/12. Is there a setting I need in InDesign 6 to keep the original PDF colors intact?

Are you using the eye dropper tool to get those numbers? It could be the way the original PDF was created. I have a feeling that the original settings ere set to "adapt" to color workflows or something similar. See if you can open the PDF in Acrobat and set the file to "Leave Color Unchanged" if you can...somewhere in the file's profile or color setting. It could also be the preview in InDesign. If somehow there is a way to find out which color settings were applied to the PDF; you could then match those in InDesign's Color Settings. If it is the preview reading, then the file should proof well. If InDesign has corrupted the PDF's original color, then the file will proof bad. I think it prudent to investigate the PDF's original Color Settings vs. InDesign's. Try posting this question in the InDesign forum and see what you get back. I'd be curious to know what they have to say over there.

Color Shift When Importing JPG Sequence into Flash CS6

I am importing a jpg sequence into flash that has been exported from After Effects CS6. No matter what I try, the color will shift when the image imports into flash. The sequence originally started out as a vector graphic in Illustrator (color profile set to sRGB IEC61966-2.1) and then imported into After Effects for an animation that I couldn't quite achive in Flash. The color profile in After Effects is also sRGB IEC61966-2.1 with the "Match Legacy" checkbox checked. I export it out of After Effects as a JPG Sequence and then import into Flash. No matter what I try, the bitmap images' color will shift (become dull) when I import. Even when I open the images in Windows Photo Gallery, they look fine - it's only when I import into Flash. I've also tried PNG and .PSD Sequence with the same result. I've searched around, but still haven't found a solution. Any help is greatly appreciated.

I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.

How Important are ICC Profiles when Importing Stills into Premiere Pro?

Hello,
I came across the following troubling language in a review of one of Steven Hullfish's books on Color Correction:
"I also felt as though the author neglected to give ICC profiles enough attention.
Granted, they are seldom used in pure video workflows, but there are an awful lot of folks out there compositing still images into video content who need to know how to soft-proof against the right destination space in Photoshop so they aren't surprised by the color shifts they see in their ICC-unaware video software. Surely that should merit a pull-quote of its own somewhere."
My photos have been saved in PhotoShop in the ProRes color space. Is this going to cause unpredictablility in how my colors look when shown on a 30 foot screen?
Is Premiere Pro a type of what this author describes as "ICC-unaware" video software?
If so, what steps should I be taking?
Thanks,
Matt Dubuque, 100 Trees

Premiere Pro does not use ICC color profiles at all. Photoshop and After Effects do.
When you are working with non-color-managed applications, it's especially important that you preview your work and check your output on the same sort of device on which your audience will be viewing it.

Why can't I include a color profile when exporting to PDF?

I've a basic RGB illustrator file - no embedded or linked images, just flat colors and gradients.
I'm working in sRGB space and this is reported correctly in the info field at the lower left of the editing window.
Some issues:
1. When I look at this file in Bridge it's listed as 'untagged'. However if I re-open it in illustrator it's reported to be sRGB as expected.
What's broken here?
...and of more immediate concern:
2. Despite requesting 'Include All Profiles' on the output page of the PDF save dialog I cannot get a PDF exported that includes the sRGB profile.
Same issues in both CS6 and CC - Windows 7, 64.
Thoughts, comments or suggestions welcomed....
Thanks

Your .pdf is fine, if you open the .pdf in illustrator, adn hten do edit >> assign profile, this radio biutton will bo on what the profile. Also in the bottom left of illustrator you can see what color profile your document is saved with, btuy turning that on.
Hold down option adn you will get other fun easter egg options
Bridge only seems to show profiles for certain bitmapped formats, except .psb format.

How to get paper color profiles when printing from Acrobat

Hello,
I've been in trouble trying to print with specific paper profiles from Acrobat.
I'm running on mac os 10.8.5, and the latest version of the suite (Acrobat XI).
My printer is an Epson 3880.
I can print ok using my paper profiles when I'm printing from Photoshop; the paper profils show up in the printer box,
and I can choose from my different paper profiles, some of which I've installed recently, non-Epson papers.
But those paper profiles don't show up in the menu when I print from Acrobat…
Any hints why I can't reach those?
Thanks in advance for any help,
Keth.

Are you talking about the color profiles? If so then:
1. Go to File>Print
2. Click the Advanced button
3. Select Color Management from the window pane
4. Select the Color Profile from the Color Profile pop-up menu

Use which color profile when ordering iPhoto prints?

Hello,
I've got a bunch of photos I want to order thru the iPhoto service. Many of the photos have an embedded sRGB (Nikon mode Ia) color profile. Should I convert / save the photos with just an RGB profile or will sRGB work OK? These prints will be 8x10.
Thanks!

How do you determine whether a profile has been embedded in your images?
Unless you manually edit iPhoto's preferences it won't embed any profile upon import. On the other hand Image Capture does embed a profile.
Some cameras only reference a generic profile in the images' EXIF data (instead of embedding one) but that won't be honoured by iPhoto. Even if your images had a profile embedded it will have been discarded by editing them in iPhoto - something to watch out for.
As far as ordering prints goes it's impossible to predict the outcome.
Cheers Martin

Fireworks CS3-Color changes when importing Photoshop images

Hello,
I created a background image in Photoshop CS3 but whenever I import it into Fireworks CS3 the color changed. It seems that the saturation level is changing. The hue is close however. I tried using the color palette to type in the exact RGB & Hexadecimal number but it is still not working.
Please help. Thank you

Here are couple of good articles on the color profile-Web export issue:
At Smashing Magazine: http://www.smashingmagazine.com/2009/10/12/setting-up-photoshop-for-web-app-and-iphone-dev elopment/
At Viget Inspire:http://www.viget.com/inspire/save-for-web-simply/
(Useful info in the comments, too!)

Tweak color profile when printing on plain paper?

If Im unhappy with the colors when printing on plain paper, can it be changed?
..this is on a five cart Photosmart Premium c410a that uses 564 tanks.
In particular, yellow is too dark, a bit "orangy" and photos are a bit weird: sky looks slightly smoggy brown.
In other words my question is if its possible to tweak the color profile the HP driver uses when printing using plain paper -- for daily use.

Have you found a solution to this? I'm wondering if the same can be done for the photo prints as well...when I print photos, they turn out darker and have a purple-hue to them. Please let me know, I look forward to hearing from you.

Help! Photoshop edited jpg color distorts when imported into Muse

Okay, so I am trying to build a photography webpage (among others) and I edit most of my photos in photoshop. All photos that I edit in photoshop and save to jpg, look great when printed, uploaded to facebook, etc. however when I import them into Adobe Muse for and put them on my webpage, the colors of the photos become desaturated and/or slightly distorted (so that they look dull). When I edit images in lightroom and save them as jpg and import them into Muse, they look fine, but colors edited in photoshop seem to mess up my photos when imported into Muse.
What am I doing wrong?!
Susan

You are using some odd color management settings and not converting to sRGB most likely... Check your settings in PS itself and the Save for Web dialog and experiment around.
Mylenium

Color profile when Importing D200 NEF

Similar Messages

Maybe you are looking for