Color Range "Local Group"
Hello together,
I just wonder what the new feature within the Select: Color Range Dialogue means.
I'm using the german version, so I don't know how it's named in english, but it should be something like "local colorgroup". It's the only new feature in this dialogue.
So, what exactly does this feature? i tried for some time but I can't figure.
As far as I thought in the beginning I can reduce the selected color values a bit more smooth in adition to the tolerance-bar.
But than, sometimes, after checking the box for this feature, my selection gets twice as big as it was before?
Can anyone help me out of my misery. :)
Thanks a lot
Philip
From what I can tell, it seems that the function will be more tolerant the closer it is to the click point.
In other words, it's kinda of like a radial gradient spanning out from the point that you click. It will select more for the area closer to the click point and gradually less as it moves away.
This may or may not be what it does, this is just what I have found from fooling around with it.
Similar Messages
-
Color Range doesn't work correctly with latest update
as the title suggests, I'm having difficulty using the color range tool properly. It worked perfect just before the most recent update (13.1) and now works very strangely.
It seems to select whatever color it feels like except the one I need. And then it is very very selective if it will even select anything at all. I'm not sure how else to explain this so it is clearer and easier to be understood. I will post the System Info from Photoshop below.
Adobe Photoshop Version: 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: AMD CPU Family:15, Model:1, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 2
Logical processor count: 4
Processor speed: 4551 MHz
Built-in memory: 16330 MB
Free memory: 9473 MB
Memory available to Photoshop: 14677 MB
Memory used by Photoshop: 74 %
Image tile size: 1028K
Image cache levels: 6
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 3.0
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 1024 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7700 Series
Display: 2
Display Bounds: top=0, left=1920, bottom=900, right=3360
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 1
Video Card: AMD Radeon HD 7700 Series
Driver Version: 8.980.0.0
Driver Date: 20120611000000.000000-000
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7700 Series
Video Card Memory: 1024 MB
Serial number: 90970601443459613369
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\GGARTD~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 223.5G, 106.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
ACE.dll ACE 2012/06/05-15:16:32 66.507768 66.507768
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/09/10-12:31:21 5.0.4 79.517869
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 7.0.0.1686
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/06/05-15:16:32 66.507768 66.507768
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/06/05-15:16:32 66.507768 66.507768
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/06/05-15:16:32 66.507768 66.507768
BIBUtils.dll BIBUtils 2012/06/05-15:16:32 66.507768 66.507768
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.1.0.20577 2.1.0.20577
CoolType.dll CoolType 2012/06/05-15:16:32 66.507768 66.507768
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 2.1.2.1681
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
Required plug-ins:
3D Studio 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Accented Edges 13.0
Adaptive Wide Angle 13.0
Adobe 3D Printing 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Angled Strokes 13.0
Average 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.3
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Clouds 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Collada 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Dicom 13.0
Difference Clouds 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Embed Watermark 4.0
Entropy 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Extrude 13.0
FastCore Routines 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Flash 3D 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Google Earth 4 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Kurtosis 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Maximum 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Mean 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Measurement Core 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Median 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Mezzotint 13.0
Minimum 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
MMXCore Routines 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Picture Package Filter 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Pinch 13.0
Pixar 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Range 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.1
Shear 13.0
Skewness 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Standard Deviation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
STL 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Sumi-e 13.0
Summation 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variance 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Variations 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
Wavefront|OBJ 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
WIA Support 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
Wind 13.0
Wireless Bitmap 13.1 (13.1 20121126.r.220 2012/11/26:23:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Adobe Paper Texture
TypeDNA Plugged-in
Mini Bridge
Kuler
Adobe Exchange
Installed TWAIN devices: NONEPossibly you are missing something in the way you apply this command. Here's how I use it to select patchy clouds with ragged edges and continuously varying shades of gray:
Select the eyedropper tool on the Toolbar and on the options bar set the sample size to 3x3.
Activate the Color Range command. Activate the "selection" radio button and choose "none" in the selection preview. In the "select" box, choose "sampled colors".
Set a trial fuzziness of,say,50. Click with the eyedropper on a point in the midst of the color you want to select. That's your "base" color.
Then switch to the "Color Added" (plus) eyedropper, holding the left mouse button down while dragging it over areas deviating from the base color but which you want included.
If there are non-contiguous areas with still different colors you also want to include, release the mouse and move the cursor to those areas before dragging again.
All the while, keep an eye on the dialog box display which shows what you've selected, albeit crudely. If you pick up unwanted colors, switch to the "subtract from sample" (minus) eyedropper and drag it over those areas.
When you think you've got it about right, experiment with the fuzziness slider to see if you can improve things by increasing or decreasing fuzziness.
Don't re-use the plain eyedropper unless you want to start all over again. Optionally, instead of switching among the 3 eyedroppers, you can activate only the plain eyedropper but use it with SHIFT to add or ALT to subtract. -
Mask- color range sometime crash , did it happen to you?
Hi
i run photoshop cs5 under w7 32bit ultimate
sometime when i select a mask , mask palete -> color range photoshop stops to work and give me an error
did it happen to you?
is there a cure?
thanks
cheersThis has been happening to me today only. I have been using this program for about a year now. Today I duplicated a layer, went to select at the top, and selected "Select Color". I selected a lot, most of the image, then when I clicked "Okay" it crashed. I did this several times and it persists. I remembered to copy the error thingy one time and it was this:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: MMXCore.8BX
Fault Module Version: 12.0.0.0
Fault Module Timestamp: 4bbc6013
Exception Code: c0000005
Exception Offset: 000000000002616a
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 6e28
Additional Information 2: 60c89792d861b06d6249963314831187
Additional Information 3: b098
Additional Information 4: a86d8e801a11949dbe1113ebd4726171
Files that help describe the problem:
C:\Users\Administrator\AppData\Local\Temp\WER3D6E.tmp.version.txt
C:\Users\Administrator\AppData\Local\Temp\WERBA11.tmp.appcompat.txt
C:\Users\Administrator\AppData\Local\Temp\WERBD2F.tmp.mdmp
I don't have any plug-ins and when I went to look at the files listed, I opened WER3D6E.tmp.version.txt. But when I closed it, neither it nor the other two were there. I'm guessing the .tmp means they're temporary and I was only able to open that one because I did it so soon after the crash? Anyway, I came to these forums and saw something about MM fonts - I don't have any. I also saw people with this problem - color select. So, I opened CS5, duplicated the layer and before I could click "Select", it crashed. I forgot to get the report but I got this:
Files that help describe the problem:
C:\Users\Administrator\AppData\Local\Temp\WER2C1F.tmp.version.txt
C:\Users\Administrator\AppData\Local\Temp\WER50A0.tmp.appcompat.txt
C:\Users\Administrator\AppData\Local\Temp\WER50EF.tmp.mdmp
Any help would be great! -
PS CS5: select color range not working properly
The color range is a grate command but it doesn't work properly when dragging the eye dropper across the image. This is especially noticeable with a low range value. When you start the selection (without pressing the shift key) and drag across the image only the end point is selected instead of the whole trace. Second, when dragging with the shift key pressed not the trace is added to the selection but a rectangular area. You can easily try this out by creating any one color image and lower the range value to about 5.
In my opinion this is a bug or am I missing something?Hello,
When you start the selection (without pressing the shift key) and drag across the image only the end point is selected instead of the whole trace.
This behavior is as designed. When you make a selection without holding the shift key, and you have the first eyedropper selected in the menu (the one that doesn't have a plus or minus sign) you are a making an initial selection on the image. If you hold and drag this selection, it will just change the initial selection to match whatever destination you prefer on the image.
Second, when dragging with the shift key pressed not the trace is added to the selection but a rectangular area.
I can reproduce this behavior, too. I believe this is also as designed, because the range is too small to make an organic looking selection. I think the more standard workflow is to start with the range high (100%), make the selection of the localized color area you want to mask, and then reduce the range value as needed.
Color Range isn't terribly intuitive to me, but it can be a powerful selection tool. Photoshop Evangelist Russell Brown has a really good tutorial on Adobe TV about using color range. Have you seen this before?
http://tv.adobe.com/watch/the-russell-brown-show/the-secret-life-of-color-range/
Hope this helps! -
Color Range Command | Understanding Adobe Photoshop CS6 | Adobe TV
The Color Range command is the best way to make a color-based selection. Build and adjust your mask and then use it to apply localized changes to your image.
http://adobe.ly/10e9p8YI cannot find Color Range under Select.Why isn't it there? Please help.
-
Color range change in CS4 (why change this?)
another "change" in CS4 i quite dont understand why they did.
in CS3 i was about to sample from the toolbox the forgeground color (black-white) as well as change the foreground color (x)
and then sample from then, ensuring that I was sampling the purest white and black from that channel, now it does not work anymore.
I really feel many changes were done to CS4 were done without consulting (testing?) by heavy users (people that spend 8-12 hours a day with application. Maybe I'm wrong, but it is annoying, even the quick keys for cycling through channels make no sense whatsoever, (command 1, to start from the FIRST channel is so INTUITIVE!!!)The legacy option that you are looking for in Color Range, is still available by unchecking the strangely named "Localized Color Clusters" - this creates much cruder selections but does it more "purely"- it creates the same selections as before, and still uses the foreground colour as a starting point. Actions created in CS3 and earlier will pick up this option.
I really feel many changes were done to CS4 were done without
consulting (testing?) by heavy users (people that spend 8-12 hours a
day with application.
Yes, many of us are getting this impression especially with the last 2 revisions, although this particular feature isn't really one example. There is a lot of new functionality in Color Range under the hood, and the quality of the selections with "color clusters" on is hugely improved. -
Select- Color Range- Results in Blue Screen (PC) (driver out of date)
I've been using the CS6 beta about two days. While experimenting with color range I experienced two consecutive blue screen crashes. The first time it happened,I was working with the color range selector and was replacing the selected areas with another color using the paint bucket. About the third time I attempted this, my PC blue screened. The second time, I opened a photo, went to Select>Color Range and got an immediate blue screen crash.
I then went back to CS5 and I've been playing with the same scenario with no apparent problems.
My PC is a store built computer. It consists of an MSI 990-FXA GD80 motherboard, an AMD Phenom 1100t CPU, Asus GTX550 Ti graphics card and 8 gig of RAM. It boots from a 60 gig SSD and my programs reside on a 500 gig hard drive. The OS is Windows 7 Professional 64 bit. CS6 is using the hard drive for its scratch disk and Photoshop is using 4339 mb of the 7232 mb of available RAM - I haven't changed that. I'm running CS6 as administrator because the way it installed, it would only run in that fashion.
One disappointment during the installation was CS6 made no attempt to read my preferences from the CS5 install. That may be covered in another post, I've not yet looked.
Please keep us informed as new betas are released, because I would like some time to work with this puppy before plunking down big bux for the upgrade. As it is now, I'm going back to CS5. I get mighty nervous when my super computer blue screens!
Gerry
gswetsky AT bellsouth DOT netThe GPU is often at root of issues like yours. I've had so many problems with Nvidia drivers for their gaming-oriented adapters (like yours) that I finally went with one of their workstation cards. I have a Quadro card with just enough RAM to make Photoshop happy. The workstation drivers are optimized for reliability, the consumer card drivers are optimized for gaming and that often means they're less stable and reliable with Photoshop.
-
How to apply Software Restriction policy for specific user in local group policy object ?
I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject APII achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Color Range command in Photoshop CS6 13.0.4 no longer works after update
I just updated to 13.0.4 at the end of last week. Today I went to use the Color Range command and it will not select any colors. The Eyedropper tool works fine. Adjusting the fuzziness and other options doesn't make a difference. Nor does selecting multiple instances of a color to add to the selection. Since I use this command regularly, I feel confident that it is a bug with the update and I would love to hear of any possible fixes. Or, is it possible to downgrade back to 13.0.3? I didn't realize how much I used this and it's a major inconvenience.
I feel confident that it is a bug with the update and I would love to hear of any possible fixes.
Some people, when encountering unexpected behaviour in Photoshop, seem overly prone to use the term »bug«.
Have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?
Could you please post a screenshot with the pertinent Panels and Dialogs visible? -
Hi there,
I'm trialling Photoshop Elements and wanting to use a black and white (grey scale) layer that I've made as a mask in another layer and don't know how to do it in Elements. In Photoshop, I'd do this (there maybe a better way in PS to do it, but I haven't discovered it yet)...
Click the layer i've created that I intend to use as a mask
Select All
Copy
select layer that I want the mask to be applied to
click the Add Layer Mask button (at the bottom of the Layers window)
click the mask icon so it is highlighted (and the image isn't)
switch to Channels view
highlith the Layer Mask beneath the R,G,B layers and make it visible
Paste
make it invisible again
switch back to layers.
This works and retains the full range of transparency for semi transparency and soft edges of the mask etc.
Alternatively, I can select a Color Range, but that doesn't seem to be available in PS Elements.
So, how do I achieve the same result in PS Elements?
Thanks for your help
JonnoPerfect! Thanks very much R_Kelly. That does exactly what I was hoping to do.
Cheers
Jonno -
How to save status bar background color in local settings(Windows Phone 8.1)
I have given the user the freedom to change background colour and save it in local settings. But I am confused on how to save the status bar colour settings because I want to give the user the freedom to choose from 4-5 colours where background of status bar
can be changed.
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
// get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
// set the status bar color
var statusBar = StatusBar.GetForCurrentView(); // Exception Line
statusBar.BackgroundColor = color;
}This is what was suggested to me. Initially the app runs and saves the settings.But when the app is closed and restarted again it crashes.Hi shriyansh,
Where did you call the method SaveStatusBarColor() and LoadStatusBarColor()?
I have called your SaveStatusBarColor() in the OnNavigatedFrom method and called the LoadStatusBarColor() in the OnNavigatedTo method, it worked very well in my side.
So I can not reproduce your issue.
Here are my code and result, please try to check it:
public class test
public Color colors { get; set; }
public sealed partial class MainPage : Page
List<test> testdemo = new List<test>();
public MainPage()
this.InitializeComponent();
testdemo.Add(new test() { colors = Colors.Red });
testdemo.Add(new test() { colors = Colors.Green});
testdemo.Add(new test() { colors = Colors.Gray});
testdemo.Add(new test() { colors = Colors.Blue });
this.NavigationCacheMode = NavigationCacheMode.Required;
public static void SaveStatusBarColor()
// get status bar color
var statusBar = StatusBar.GetForCurrentView();
var color = statusBar.BackgroundColor;
// convert color to hex string
var hexCode = color.HasValue ? color.Value.ToString() : "";
// store color in local settings
ApplicationData.Current.LocalSettings.Values["StatusBarColor"] = hexCode;
public static void LoadStatusBarColor()
//get color hex string from local settings
var hexCode = ApplicationData.Current.LocalSettings.Values["StatusBarColor"] as string;
if (string.IsNullOrEmpty(hexCode))
return;
// convert hexcode to color
var color = new Color();
color.A = byte.Parse(hexCode.Substring(1, 2), NumberStyles.AllowHexSpecifier);
color.R = byte.Parse(hexCode.Substring(3, 2), NumberStyles.AllowHexSpecifier);
color.G = byte.Parse(hexCode.Substring(5, 2), NumberStyles.AllowHexSpecifier);
color.B = byte.Parse(hexCode.Substring(7, 2), NumberStyles.AllowHexSpecifier);
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = color;
statusBar.BackgroundOpacity = 1;
protected override void OnNavigatedTo(NavigationEventArgs e)
LoadStatusBarColor();
protected override void OnNavigatedFrom(NavigationEventArgs e)
SaveStatusBarColor();
private void ChangeColorButton_Click(object sender, RoutedEventArgs e)
var statusBar = StatusBar.GetForCurrentView();
statusBar.BackgroundColor = testdemo[Convert.ToInt32(Mytextbox.Text)].colors;
statusBar.BackgroundOpacity = 1;
The result:
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Need a Way to Create a Local Group Push via GPO on Windows Server 2003 DC
There is a new requirement to create a new local group on all machines and add all local and built-in administrators. To save time, I would like a GPO to create the new group, along with configuring its members. Any helpful information I found
is for Windows Server 2008 and up.
Does anyone know what I can do with my Windows Server 2003 DC?
Thanks,
Jasmin> Does anyone know what I can do with my Windows Server 2003 DC?
Since DCs do not have local groups - what OS are your member servers and
clients running? If 2003/XP: Install KB943729
You need _one_ computer running Vista/2008 or higher to edit your GPO.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Remotely add Domain User to local group
I've been playing with this for some time, and I seem to be missing something. I am trying to develop a script that reads and XML file containing a list of computers, local groups, and names of domain users (and computers) to be added to the local
groups. I would like to be able to run this from a management workstation.
I've been working from these two posts.
http://blogs.technet.com/b/heyscriptingguy/archive/2010/08/19/use-powershell-to-add-domain-users-to-a-local-group.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2008/03/11/how-can-i-use-windows-powershell-to-add-a-domain-user-to-a-local-group.aspx
It appears that the command $objGroup = [ADSI]("WinNT://atl-fs-001/Administrators") only works locally. I have not been able to figure out any format that allows me to get the information remotely. So I figured I would use Invoke-Command
to execute the two lines of code remotely.
Invoke-Command -ComputerName RemoteServer {
$de = [ADSI]"WinNT://RemoteServer/Administrators,Group"
$de.psbase.invoke("Add",([ADSI]"WinNT://Domain/User").path)
(I am trying it first with fixed, valid values - change to variables when I get things figured out.) That gave me the error:
Exception calling "Invoke" with "2" argument(s): "Number of parameters specified does not match the expected number."
+CategoryInfo :NotSpecified: (:) [], MethodInvocationException
+FullyQualifiedErrorID :DotNetMethodTargetInvocation
+PSComputerName :RemoteServer
I need help on what to try next.
Thanks.
. : | : . : | : . timI've been playing with this for some time, and I seem to be missing something. I am trying to develop a script that reads and XML file containing a list of computers, local groups, and names of domain users (and computers) to be added to the local
groups. I would like to be able to run this from a management workstation.
I've been working from these two posts.
http://blogs.technet.com/b/heyscriptingguy/archive/2010/08/19/use-powershell-to-add-domain-users-to-a-local-group.aspx
http://blogs.technet.com/b/heyscriptingguy/archive/2008/03/11/how-can-i-use-windows-powershell-to-add-a-domain-user-to-a-local-group.aspx
It appears that the command $objGroup = [ADSI]("WinNT://atl-fs-001/Administrators") only works locally. I have not been able to figure out any format that allows me to get the information remotely. So I figured I would use Invoke-Command
to execute the two lines of code remotely.
Invoke-Command -ComputerName RemoteServer {
$de = [ADSI]"WinNT://RemoteServer/Administrators,Group"
$de.psbase.invoke("Add",([ADSI]"WinNT://Domain/User").path)
(I am trying it first with fixed, valid values - change to variables when I get things figured out.) That gave me the error:
Exception calling "Invoke" with "2" argument(s): "Number of parameters specified does not match the expected number."
+CategoryInfo :NotSpecified: (:) [], MethodInvocationException
+FullyQualifiedErrorID :DotNetMethodTargetInvocation
+PSComputerName :RemoteServer
I need help on what to try next.
Thanks.
. : | : . : | : . tim
The ADSI commands work remotely as long as you are an administrator on the domain.
Invoke-Command only works on systems set up for WinRM remoting and if you are an Administrator on the domain.
Normally we would use AD and GP to add users to local groups.
Your script is also incorrect. Thisis the correct template.
$remotepc='somepc'
$de=[ADSI]"WinNT://$remotepc/Administrators,Group"
$de.Add("WinNT://Domain/User")
You should never the user to the admin group. It is a formula for disaster.
¯\_(ツ)_/¯ -
Color Range doesn't work properly in CS3
Hi there,
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area.
I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
I need help...
ThanksPossibly you are missing something in the way you apply this command. Here's how I use it to select patchy clouds with ragged edges and continuously varying shades of gray:
Select the eyedropper tool on the Toolbar and on the options bar set the sample size to 3x3.
Activate the Color Range command. Activate the "selection" radio button and choose "none" in the selection preview. In the "select" box, choose "sampled colors".
Set a trial fuzziness of,say,50. Click with the eyedropper on a point in the midst of the color you want to select. That's your "base" color.
Then switch to the "Color Added" (plus) eyedropper, holding the left mouse button down while dragging it over areas deviating from the base color but which you want included.
If there are non-contiguous areas with still different colors you also want to include, release the mouse and move the cursor to those areas before dragging again.
All the while, keep an eye on the dialog box display which shows what you've selected, albeit crudely. If you pick up unwanted colors, switch to the "subtract from sample" (minus) eyedropper and drag it over those areas.
When you think you've got it about right, experiment with the fuzziness slider to see if you can improve things by increasing or decreasing fuzziness.
Don't re-use the plain eyedropper unless you want to start all over again. Optionally, instead of switching among the 3 eyedroppers, you can activate only the plain eyedropper but use it with SHIFT to add or ALT to subtract. -
Domain local groups with members from other (same forest) domains?
I'm confused about granting access to a share via a domain local group that contains members from other domains. Consider this scenario:
Joe Smith logs into his own domain (DALLAS.CORP.COM) and his token gets the DALLAS\sales global group.
A share (named sales) in a different domain within the same forest (FORTSMITH.CORP.COM) assigns ntfs modify on its DACL via the FORTSMITH\sales_modify domain local group, which contains the DALLAS\sales global group.
Joe goes to access the sales share...what happens, exactly?
Since Joe logged into a DC in the DALLAS domain (outside the replication scope of the sales_modify group), his token does not contain sales_modify, right? So when he goes to access the sales share, that file server in FORTSMITH checks his token, doesn't
see FORTSMITH\sales_modify in his token, and boom: access denied...right?Universal group is ok within the same forest but different domain.
Domain local is ok between separate forest (Trust should be in place).
Global is ok for same domain.
See this for more details.
http://msmvps.com/blogs/acefekay/archive/2012/01/06/using-group-nesting-strategy-ad-best-practices-for-group-strategy.aspx
Written by Ace Fecay-DS MVP.
Regards~Biswajit
Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights.
MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, MCTS, Enterprise Admin
MY BLOG
Domain Controllers inventory-Quest Powershell
Generate Report for Bulk Servers-LastBootUpTime,SerialNumber,InstallDate
Generate a Report for installed Hotfix for Bulk Servers
Maybe you are looking for
-
Create a Distribution Certificate as a p.12 file in Keychain Access not working?
I need to create a Distribution Certificate as a p.12 file. I downloaded my ios_distribution.cer file from iOS Provisioning Portal/Certificates/Distribution/Download but this file will not install on my Keychain Access Certificates. Once installed I
-
FR: Full Screen Preview of Multi-Camera Angles
The Program monitor can be viewed in Full Screen mode, as we all know, but when the Program monitor is displaying Multi-camera angles, it can only viewed in windowed mode. Full Screen mode no longer works in this situation. This is inconsistent, il
-
Magic Mouse no longer works on mousepad?
Don't know why, don't know if it was an update, or the fact that i just went to Lion, but now my mouse only works on my hard table surface, and barely moves (pointer just chunks along) if i try moving the mouse on the mouse pad, which it works fine o
-
Catalyst CS5 file created on PC opens "crippled" on Mac
Hi, I created a CS5 Catalyst file on a Windows XP PC, then emailed the file to myself and subsequently opened the file on my Mac OX 10.6.6. It opened, but all the "pages" are not here and I can really do anything with it. Please advise. Thanks.
-
Recover a Deleted Note from Icloud
Hello Disappeared a note from my IPHONE. I use the apple app NOTES and one day, I don't know how, a note was duplicated and automatically deleted another note (bug problem). I really need you to recover the note that was deleted. It was automatically