Color running on right side of entire paper

why are all of my documents that im printing have color running on the entire document from top to bottom. i used the icon on the printer to perform a cleaning and the color still running on the entire paper

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

Similar Messages

Printout are printed to the right side of the paper

Printout are printed to the right side of the paper
all other settings are ok but the text is printed too much to the right side

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Picture corruption - color bar on right side.

My basic setup is as follows.
Running XP Pro and Photoshop CS3 (including Camera Raw plugin 4.4.1)
Run above software with color management profiles for 2 monitors, LG L1710B (1280 x 1024 resolution) and Eizo CE210W (widescreen display) (1680 x 1050 resolution).
Display adapter is Radeon X1600, with Catalyst Control Centre and driver (maintained up-to-date with latest release).
The observed problem exists ONLY when running Photoshop CS3 (although RAW files are accessed also by other software).
Under Photoshop, RAW files may be opened in one of 2 ways.
A) Opened in Camera Raw through Bridge CS3:
B) Opened in Camera Raw through Photoshop CS3:
All RAW images opened under Bridge CS3 display perfectly on both monitors.
Images opened under Photoshop CS3 and displayed on the L1710B monitor are satisfactory.
All RAW images opened under Photoshop CS3 and displayed on the Eizo C210W monitor show the fault. Please note this relates ONLY to RAW images - no problem with tif or jpg. Also, when the picture is later saved (as tif or jpg),it does not contain the erroneous color band - the problem appears to be one of diplay only!
To explain the fault: the defect appears as a vertical stripe positioned on the right side of the PICTURE area, of slightly different brightness/color shade to the main part of the displayed picture.
I have referred the problem as fault report to:
1. AMD re Radeon adapter/driver and Catalyst: they have investigated over a 4 week period, and reply that the problem is elsewhere.
2. EIZO re Monitor (no separate driver outside of Windows), who say the problem is not monitor related.
3. Adobe re Photoshop, who relate the matter to AMD as supporters of the display driver.
4. AMD have (in the past) suggested that it is not a problem for referral to Microsoft!
Therefore STALEMATE! How do I get this resolved?
After long and careful tests I have undertaken, I have a theory on the cause of the problem which goes so:-
I believe the image on the Eizo is properly being color corrected with the color profile applicable for that monitor. However, I believe the size of the color correction mask being applied is being taken from the screen parameters of the L1710B display. This results in a color correction "overlay" area of 1280 x 1024 being imposed on the Eizo screen of 1680 x 1050 - justified from the left edge. This causes a strip on the right edge of (1680-1280) 400 to appear non-color corrected! In actual practice, the position of the left edge of the color stripe does appear 3/4 way across the screen, which supports this postulation! Also, if I vary the color profile, the screen effect (tone wise) does slightly change, causing the stripe to either more or less prominent.
I would personally conclude the matter to be within Photshop CS3. The fact that the RAW module running under Bridge produces NO PROBLEM, while the (same) RAW module running under Photoshop produces the fault suggests to me that the RAW module is being preconditioned in a different way by the respective softwares.
I will be pleased to benefit from thoughts of others - and also to receive ideas as to where I should next direct my fault reports.
While I am at lease able to view/process RAW files through the Bridge route, in an ideal world I should be able to do the same though Photoshop!
Thanks - Eric

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

Mpeg2-dvd render color stripe on right side

When I render HD720p video to mpeg2-dvd (23.976) I end up with a thin color stripe on the right side of the output video. The stripe usually appears wherever I have a crossfade between images/videos. How can I solve this problem>

Thanks Ann,
I have not had this problem since upgrading to CS6. This is my 40th project and the only one with this problem, so far. I've check and rechecked everything and the compositions/setting, etc. are consistent from project to project. All comps and source files are 23.976. No scaling was used.
As you suggested, the issue is with the crossfade. Unfortunately, I cannot always overlap the clips because of the audio portion (I need to crossfade the video only). These are people interviews where I've had to edit out a short segment (say 7 seconds), then rejoin the clip by butting then together to reconstruct the audio. Any ideas for thIs?
Thanks again,
Steve

Black specs on right side of paper

I have very small black specs being printed on the very edge of the right side of the paper, on the front. If I use the duplexer the specs are on the same side of the paper on the back, so it's coming from the right side of the printer. I do see a pattern to them. It starts at the top and repeats the pattern every 1 7/16 inches. There are three dots, the second one being about 5/32 inch from the first, and the third being 9/32 inches from the second.
I've cleaned out all the loose toner that I could from the cartridge area, and it didn't seem to help in the slightest. How can this be fixed?

I forgot to mention that this is a HP 4700.

Color Laserjet 3600 PQ print quality test pink shows faded on right side

All the color print outs have this somewhat faded color on the right side.
When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
what else can i do to fix this?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

The bottom part of display whiter than the rest, white on right side more brownish

So I got a new replacement of my Thunderbolt Display, this time the one I got is straight (previously left side was lower than the right side), however I can see in new one that the bottom part of the display seems to be more white (you can see a slight horizontal line at the bottom) and also on the right side of the display white colour seems to be more brownish.
I have been wondering if that is acceptable for Thunderbolt monitor? Is that a backlit bleed on white? Can you see anything on the photo I have made or am I going slightly mad?:) Please help.

The display uses LED technology which means there will be some bleeding or clouding of light on dark backgrounds (mostly from the edges). You should not have any brown color on the right side as your image shows unless perhaps you need to make some adjustments on your graphics card. I use mine with a 2012 Mini and it has good colors.

Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

I have a HP Officejet Pro 8500A. I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded. The paper is 5X7 when folded, 10X7 laid flat.

shgilljx,
Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.
Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
Text template: The text will be printed on number 2. That means your wording must be within the bottom half of the page.
Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
Print the text template. Insert side #3 into the printer. The text should print on side #2.
Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
When folded, all should be correct, if I did it right.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Emails print off yhe right side of the page and I lose part of the message.

In Safari emails run off right side of the page when printing.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Pb G4 1.67Ghz running OS 10.4, right side of the screen 2, pixel wide vertical lines, a few days later colors posterized on pics and vid. Vertical lines don't show screen capture, but pics still posterized. Hardware test from disk shows ok.

Right side of screen started showing 2, pixel wide vertical lines. A few day later colors in pics and vid posterized. Vertical lines don't show in screen capture but pics still bad. Ran hardware test from disk, ok, adjusted color in sys prefs, new profiles a bit better but still bad, mpeg worse, jpeg bad. No better in new user account. Now a month later, right side has 8 vert lines and occasionally a slightly darker area in bottom corners for a few seconds. Reset pram, battery plugged into adaptor 99%. I can notice, for a slit second, when the screen saver is on, when I move cursor to get back to desktop, true color of image can be seen for a flash of a second.

sorry, was in a rush, any suggestions to fix or ideas of what has gone wrong

Hp printer cuts off right side of paper

Hello,
I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
This question was solved.
View Solution.

Hi - Can you provide the model of printer you're using? That will help determine what steps to take to troubleshoot. Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word). Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges. How to run the test page from the printer is dependant on the printer model.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Why does the mouse 'run' to the lower right side of desktop and freeze when a SmartBoard is plugged into the USB port. Running 10.8.5. Sometimes the pointer has a cloud under it but it always freezes.

I run SmartBoards connected to iMacs running 10.7 and 10.8 throughout my school. On one of these computers the mouse has recently started freezing the minute a SmartBoard is plugged in to the USB port. The mouse 'runs' to the bottom right side of the screen, a cloud often is under the pointer, and it is not longer interactive. You can move the mouse upward a bit with the cloud following some of the time but it does not work. Once the SmartBoard is unplugged the mouse works normally. This particular computer worked fine with the SmartBoard until recenlty. Any solutions or ideas?

1. Reset the Pram and SMC
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ph14222
If these don't relate to your computer a quick web search will get you details
2. Run the Disk Utilty to verify the disk and then repair permissions.

My iPad keyboard divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?a

My iPad keyboard (spontaneously?) divided in half with one side on the left side of the tablet, the other on the right side and an equal blank space separating them. The entire keyboard also became smaller. How can I get it back to normal?

You can also turn OFF Split Keyboard
Settings>General>Keyboard>Split Keyboard>OFF

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
David Miller
[email protected]

Black line on right side of paper while printing on laserjet 1018

WHILE PRINTING DARK BLACK LINE IS APPEARING ON RIGHT SIDE OF PAPER.

It is time for maintenance on your printer. Perform an alignment.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Color running on right side of entire paper

Similar Messages

Maybe you are looking for