Color setting for I/O field

Hi,
I am using I/O field in screen painter.I need to color is with green or yellow etc...can anyone tell me how do i do that?
thanks
Suganya

You can't use "colors" in Dynpro...Maybe, Gray and Blue (By clicking Visible on the component properties)...
Greetings,
Blag.

Similar Messages

Using different color sets for button in one menu

Hi!
In DVDSP4 you can have three different sets of color mapping for your menu buttons.
I'm using TIFFs as backgrounds and a simple black/white TIFF for overlay. I do want to use different colors for my buttons in the same menu. Can I do this with a black/white overlay, or do I have to use an overlay with (four different) colors? My wish is to be able to create one or two color sets and just assigning any of them to one or more buttons in one menu.
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive

One Overlay is fine
What you need to do is set up the color sets in Inspector and assign them to the different buttons. Take a look for "Color Mapping Sets" in the PDF where it details how to do it (PG 219 in DVD SP 3, PG 238 DVD SP 4). Note that it works for selected and activated states for the buttons, not normal state.
Also note, at least for me anyway, this has always been a buggy feature where sometimes it works properly and sometimes it does not. Never figured out why why either, but sometimes it does not flag the proper set to be used

Needing Help with color setting for Photoshop 4 + imac

Hi, Is anyone able to assist me please. To cut a long story short. i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing. So my problem is .... I had some prints printed today at Fuji and the prints have come back dark and just not up to scratch. I know that it is not Fuji, but my settings. I had someone set up my imac and Photoshop last time, but this time i will have to do myself and i just don't know what to set them at. Can anyone help please. Not sure if you need this info but i am in New Zealand. many thanks in advance.

Being in the business of printing other people's image files, I can say without any doubt that the advent of digital image processing has definitely muddied the waters to a much greater extent than was the case when printing negaive film. I'm also a shooter, and have been using such programs for many years, so I can understand the desire to manipulate your files before sending them to the lab. Color negatives never had "Profiles" attached to them. If the proper film was used for the lighting conditions, it was simply up to the lab to make sure the resulting print was in balance, both in color and density. It was also the lab's responsibility to maintain a degree of quality control that would make all of the above possible and repeatable. I have to agree with the other response to your question. Whether or not you have an embidded a profile, it's always the job of the printer to make sure the final print is up to a certain standard of quality. If that is not the case, find another printer. Unless you have indicated that your files should be printed without any corrections, the oweness belongs to the lab/printer. I do have a few customers whose work I can print with very few corrections, due to the fact that they have calibrated their displays and have a very tight workflow. However, the vast majority of files that I print require a considerable degree of correction, that's my job. It's also the job of your lab/printer and if they are nor satisfying your needs you have to find someone who does. I have printed many files that have no profile embidded and I simply convert them to my working color space(Adobe RGB 1998). If you are concerned about doing color settings, this is the obvious place to start. Create a custom space and make sure your working color is set to Adobe RGB 1998, not sRGB. Adobe RGB 1998 is a considerably larger color space with a wider gamut and will allow for more choices and a wider range when it comes to processing the image. Pro Photo RGB is an even larger color space, but one that is seldom used at this time. I suspect it will become more popular in the fairly near future, as other technologies continue to push the color gamut envelope.
So, I guess the gist of all of this is that you need to either have your lab/printer redo the dark prints, or find someone who knows how to print. And equally important, someone who cares about your work as much as yo do.
I am attaching a screen shot of my color settings and I would suggest this might be a good place to start.
Gary

Is there a global background color setting for all apps?

This pertains to a DESKTOP COMPUTER uisng 10.7 (Lion) - not iPad or iPhone or iXyz
I've spent the last half hour on the forums but each talk about a SPECIFIC application's background. I'm tired of staring into a WHITE lightbulb when switching applications.   Most professional applications (like final cut pro or photoshop) have a dark grey or beige background that is restful on the eyes.     That is usually easily set by navigating preferences.   Top web pages know how to use dark backgrounds to make the colors really stand out.
My question pertains to a GLOBAL setting so that ALL applications have the same background color (unless specifically set within).   Windows had this for over a decade. Is Mac behind Windows?   Seems like this should be under Settings==>Display or Desktop (but I can't find it).
I've seen discussions about creating a rectangular window (I presume in Photoshop) then saving it as "template" -- but there is no save-as "template" setting in Photoshop or WHERE to put it -- or active the template.   Lots of missing instructions if so.
This ain't rocket science fellas -- could one of you geniuses point me in the right direction with some SPECIFIC navigation (ie: go here, click this, save that, do this).
Thanks for your time & thoughts.
-Dale

You're confusing being behind Windows with "don't want to". I'm sure Apple's engineers could add the ability for users to play with the desktop theme if they wanted, but they choose not to. They never have.
However, there are third party options for that. This one looks pretty interesting. Flavours is another.

Color setting for custom reports in Grid Control

I created a report in GC (chart from SQL) which works fine.
I like to adjust the colors for the report. Is there any possibility to do this?

Which version of EM are you using? The native reporting tool does not support changing colors.
In EM 12, we added support for Oracle BI Publisher which is a more advanced reporting tool and allows more design options.
More details here: http://www.oracle.com/technetwork/middleware/bi-publisher/overview/index.html

Color setting for particular transaction

Hi all,
Is it possible to change in gui background color for particular transaction ?
Thanks,
Edited by: Sandeep Nigam on Dec 2, 2008 2:07 PM

Have you tried the options button in the GUI.
Just check that.
Regards
Neha

Color settings for video demos in Captivate 7 and 8

I have been working with Captivate 7, and I recently got the Captivate 8 upgrade. I haven't been able to get good quality colors in my video demos in either version. I can select either 16 bit and 32, but the resulting video looks exactly the same, like when I change my monitor to display 16 bit. Software simulations look great, but I can't seem to change the color setting for the videos. I've changed the settings both in general and in individual projects, and still no change. I'm using a Mac to capture video on Windows 7 through VMware. I've tested the video demo capture on the Mac, and it's showing the same degraded colors. Any ideas?

Hi There,
Welcome to Adobe Forums.
As such there is no skin specific to RTL in Captivate 8. As of now bullets in quiz cannot be alligned to right . To know more you can refer to the following link : Right to Left Language Support in Adobe Captivate 7 - YouTube
Regards,
Mayank

Can not update Term value for metadata columm field to empty

Hi ,
I have created a TermSet for Sitecollection and created Managed metadata column called Delivery linked with the Term (onsite , online, etc..) in the Term set . If i try to update the Term Value for Metadata Colum field to
blank ( e.g remove onsite so it has blank value) then click Save , it does not save the blank value it reverts back to the original value set for that metadata field. The metadata column is set "not to require to contain information"
& do not force unique value
Any idea
Thanks
mp

Hi,
I understand that you want to change a metadata column to be blank. I cannot reproduce your issue. I can set the managed metadata column to blank as expected. Can you reproduce this issue with another managed metadata column? Or does this happen to the only
managed metadata column?
Here are my steps to achieve this:
Open the root site of the site collection in browser.
Click Site Actions> Site Settings. Click Term Store Management under Site Administration.
Created the term store. Then create a managed metadata column to use this term store(have tested this column with both list and library).
Set "not to require to contain information" & do not force unique value &Allow fill in value& Don’t specify a default value.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

How to create seperate color channel for print of illustrator document

Hi,
I need to print a document with partial UV-spots, and cannot figure out how to make my Illustrator document ready for print!
The online print center guides me to:
create a 'seperate print channel' for the specific elements in my document i want covered, with either a '5th color or a special color' set for 'over-print and 100% color'.
Can anyone help?
Thank you!

Draw the spots you want to use and fill them with a spot color.

Setting the colour red for an input field or a text-field in a table

Hy,
I am using an input-field or text-field within a table-cell. For some rows in the table the text in the input-field / text-field should be red. How can I do this ?
Florian Hroch

Create a new attribute "TextColor" of type "com.sap.ide.webdynpro.uielementdefinitions.TextViewSemanticColor" (local DDIC types), under the table's data source node.
Bind the "TextView.semanticColor" property of the table cell editor to this attribute.
If you cannot add new attributes under the data source node (this is the case if there is a structure binding), add a value node "TableProperties" (cardinality 1:1, selection 1:1) under the data source node and add the attribute there.
Then you can control the color of the TextView in table row at index i by setting the "TextColor" value for node element at index i.
For an input field, you cannot set the text color, a workaround might be adding an icon in an extra column.
Armin

Setting color codes for more than one photo at a time

Is there any way to set color codes for more than one photo at a time?

Hi John,
I will look at keywords. My issue is speed. Right now I am culling and editing an event shoot that spanned a week with 35 separate events and more than 5000 images. So I use the fastest most convenient method I can and it still takes a long time to have a completed and final shoot. On this shoot I will end up with a final set of around 1500 images. Right now I am finishing processing a show that will hang in the Deutsches Amerikanish Zentrum in Stuttgart.
As I am sure you are aware by now, having seen enough of my inane questions that over the last two years or since Lightroom version 1.xx if I could not figure out how to do something I skipped it. So many things in Lightroom are buried and unless you have a mind like a steel trap (and think that some of you guys in the forum do) locating how to do something is not obvious.
For example, I only learned (in the last hour) that I could assign colors as a group of selections by using Shift + number. I found this in a side head in Martin Evenings Lightroom book. I still do not know how to find a way to display the color filter "selection" set in Library mode. Is there a way?
To top it off, Stuttgart Media University asked me if I would add a Lightroom module to my schedule this year. Now I have a compelling reason to learn all those missing pieces that I have created workarounds for. Hence the number of posts you have been seeing from me over the past few of weeks.
I tell my class that there are no such things as stupid questions, only questions. Now I am practicing what I have been preaching for the last gazillion years. Guys like you have been great.
My workflow is
1. I first separate all images by event. I do that at the time of import.
2. I do a fast pass rejecting all the obviously bad images
3. I do a second pass grouping the images by sub-group (speeches, people talking, performances, etc.) This is where I run out of selection methods and your key-wording could work but it would probably take too much time to establish a keyword set for a single event. Where I have more than five subgroups I set up different collection sets with one collection for each sub group. However I would like to keep a single event in one collection.
4. I then select the images to be used by color code.
5. Next I process the final images (crop develop etc) by collection.
6. Last I output the set according to client requirement.
If you have a better workflow, I am all ears.
By the way, what is your photo specialty and where are you located?
Jim

How to set fixed size for inputfile text field

Hi all,
I am using inputfile component to test file uploading so I created a simple upload page. When I finished upload the file, the input text field will "shrink" its size and change the size to adjust the file name. Is there any way to set a fix size for input text field?
Here is some part of the code:
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1">
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>
FileBean:
public void fileUpdate(ValueChangeEvent valueChangeEvent) {
RichInputFile inputFileComponent = (RichInputFile)valueChangeEvent.getComponent();
UploadedFile newFile = (UploadedFile)valueChangeEvent.getNewValue();
UploadedFile oldFile = (UploadedFile)valueChangeEvent.getOldValue();
Thanks,
Jerry

you can set columns attribute in af:inputfile. Please see highlighted area i have inserted to you code
<af:form id="f1" usesUpload="true">
<af:panelHeader text="File Uploader" id="ph1" columns = "34" >
<af:inputFile label="File to upload" id="if1" autoSubmit="true" valueChangeListener="#{fileBean.fileUpdate}"
value="#{fileBean.file}" partialTriggers="if1"
columns="50"/>
</af:panelHeader>
<af:commandButton text="Save" id="cb1"/>

InDesign CS6 how to set justification for form text field?

Hi everyone,
I've been playing with the ability to create form for PDF file but I haven't figure out how to set a center justification for a text field. By default it's left. Same thing for font, the one selected in InDesign while creating the form isn't used when editing the form in Acrobat.
Do I need to create a paragraph style with a specific name to preserve both attributes?
Thanks.

InDesign CS6's forms features are great, but you're looking as version 1.0 of the feature. Those features cannot be set in InDesign.
Furthermore, if you try to pick a font other than the standard ones at the top of the menu, don't expect that your form users will be able to pick those fonts when they open up the form in Reader or Acrobat. I'm pretty sure that custom fonts are not stored in the PDF form.

Problem in setting a color(back & Fore) to a list in a panel

I have a probem in setting the foreground and Background color of a list which is in a panel.Can anyone rectify the error in my program.I have given the appropriate syntax but the output color of the list is default color(Background is cyan and foregroung is black).
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
public class listcolor extends Applet
     CombaPanel cp;
     public void init()
          setLayout(null);
          setBackground(Color.black);
          cp = new CombaPanel();
          add(cp);
class CombaPanel extends Panel implements ItemListener
     List l;
     String name[]={"C","C++","Java",".Net","VB","Perl"};
     public CombaPanel()
          setLayout(null);
          setBackground(Color.gray);
          setBounds(40,40,250,250);
          l=new List();
          l.setBounds(20,10,150,100);
          l.setBackground(Color.black);
          l.setForeground(Color.red);
          for(int i=0;i<=5;i++)
          l.add(name);
          add(l);
          l.addItemListener(this);
     public void itemStateChanged(ItemEvent ie){}
/* <APPLET CODE = listcolor width=400 height = 300>
</APPLET>*/

Hi Lakshman,
Go to XCM setting of your ICSS application go to
Comonents --> Customer --> ui.
Create new ui element. Over here you can select default language for your ICSS web application. Save it by giving some name like "lan1"
Now go to Application Configuration --> Customer --> <your Configuration>
Here click on "Display" Button of "Advance Setting" go to "ui Data" selection box and select "lan1" from drop down box save it and restart your application.
I hope this will open with your default language which you have set in "uidata " component "lan1"
Regards.
eCommerce Developer

How do I check Business object set type for a particular field

Hi,
I have a requirement to make the DESCRIPTION field editable for Internal Goods and Service .I have done it for Limit shopping cart with following details in the below configuration
Goto SPRO->SAP Supplier Relation ship Management
                         ->SRM Server
                             ->Coss applications and settings -> Extensions and Field Control
                                      ->Configure field control->configure control for fields substructure (in tabs field)
Bus. Object Set Type 32
Structure Field Name   DESCRIPTION
Bus. Object Type        BUS2121
Set Level                    ITEM
field editable               checked
But for Internal Goods and Service which Bus. Object Set Type should i use to achive this
Thanks
Vivek

Hello Vivek,
Execute transaction SM30 and display the Table/View /SAPSRM/V_ACTSET. Here you will find set type of all the fields.
Regards,
Arun Singh

Color setting for I/O field

Similar Messages

Maybe you are looking for