Color setting for particular transaction

Hi all,
Is it possible to change in gui background color for particular transaction ?
Thanks,
Edited by: Sandeep Nigam on Dec 2, 2008 2:07 PM

Have you tried the options button in the GUI.
Just check that.
Regards
Neha

Similar Messages

To Find Include for Enhancement for Particular Transaction

Hi Friends,
Could You Plz assist me...
How to find out the User Exit for Particular Transaction.
Like for ME23N, we have a Include RV64A701 OR for VA01, we have the include MV45AFZZ and so on for every Transaction, which we believe as the User Exits.
Plz let me know, How to find out these Includes apart knowing from Configuration Part.
Thanks Alot

Hi,
1. In the transaction go to : system->status-> <PROG. NAME>
2. after getting the program name go to SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
once you get the exit you should also be able to find the include name using the where used list, just select the exit and click where used list.
rgds,
venu.

Restrict the badi for particular transaction code

hi, i have implemented BADI_FDCB_SUBBAS01 and in the subscreen area 10 i attatched my own module pool program and screen number. my requirement is for FB60 only. and it is working for FB60 fine. the problem is also working for FV60.
Is there any possibility to restrict for particular transaction code say for FB60.
Please reply me soon....

Hi Praveen,
Since this is a single use badi you have the option to create a new filetr of your own. You can create a filter of type sy-tcode and in your implementation assign it a value of your transaction. Thus if someone else also wants to use it for some other transaction can have a implementation of his own for some other transaction.
The other way which is though not the recommended way buy easy to use is to put a check before your code on SY_TCODE = your transaction.
revert for more clarifications if required.
<b>Always reward points to useful suggestions.</b>
regards,
Vikas
Message was edited by:
Vikas Taneja

How can i identifiy the BAPI Name for particular transaction.?

Hi friends ,
In data upload by BAPI How can i identifiy the BAPI Name for particular transaction.?
For example ME21 How can i identifiy the BAPI Name?
arun

hi,
check the link:
ME21 tcode for Purchase Order creation so u can make use of BAPI f4 help i.e. ex-BAPIpo
for list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm

Want Transaction History for Particular Transaction for Particular User. .

Hello Friends,
I have one query.
I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
One USER_ID in SAP Server is shared among 6-7 people to do their work.
So, I want to know that from which terminal that user has run that transaction to do its work on particular Date/time.
I tried STAT, STAD, ST03N, but did not help me very much to get deep level information.
May be, i am missing something to get the solution for this kind of situation.
Any Solution for this kind of Situation ?
I am waiting for your valuable Response.
Regards,
Bhavik Shroff

I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
ST01 will give you the Result after switching on the TRACE. I want to get Transaction History for a particular DAY/Weeks/Month .
e.g.
One User Id is shared among 6-7 people. One of the person did something using FB08 transaction on last 08/07/2008. But, as the User ID is shared among several User, How can i know the person who did that change and from which place/Terminal.
See,
I have the following information to fire the search.
-> User Id information
-> which transaction he/she used to do that work
-> When he did the change for something (means i know the exact date)
But , I want to know ,from which Terminal he/she executed that transaction, as the User ID is shared among several people.
You tell me the way ,so that i can have total required information for this kind of situation.
If i am wrong at any step , then let me know.
Regards,
Bhavik Shroff.

Setting for enjoy transactions

Dear all,
could any body help me in this.
how do i get edit - new entries option in
Img-Materials Management-Inventory Management and Physical Inventory-Settings for Enjoy Transactions-Settings for Goods Movement-Setting for Transactions and Reference Documents
regards

Hi
here you can add any transaction or reference documents.You can make whether the transaction event active or inactive means example In MIGO there are several options GR,GI,Transfer posting etc.If you remove active check box againest MIGO, you can't perform GR with migo.(GR transaction will disappear from drop down).
Similarly Within GR , you can allow GR with respect to Purchase orders,Inbound delivery etc.You can't add your own transaction/event and reference document for transaction/event.
Regards
Ramakrishna

Using different color sets for button in one menu

Hi!
In DVDSP4 you can have three different sets of color mapping for your menu buttons.
I'm using TIFFs as backgrounds and a simple black/white TIFF for overlay. I do want to use different colors for my buttons in the same menu. Can I do this with a black/white overlay, or do I have to use an overlay with (four different) colors? My wish is to be able to create one or two color sets and just assigning any of them to one or more buttons in one menu.
G4 Dual, FCP5, DVDSP4, BitVice, Soundtrack Pro Mac OS X (10.4.3) 2 GB RAM, SuperDrive

One Overlay is fine
What you need to do is set up the color sets in Inspector and assign them to the different buttons. Take a look for "Color Mapping Sets" in the PDF where it details how to do it (PG 219 in DVD SP 3, PG 238 DVD SP 4). Note that it works for selected and activated states for the buttons, not normal state.
Also note, at least for me anyway, this has always been a buggy feature where sometimes it works properly and sometimes it does not. Never figured out why why either, but sometimes it does not flag the proper set to be used

User not authorized for particular Transaction.

While running a Custom Transaction I m getting error that user is not authorized for that transaction.
how to solve this?

Hi,
Try using FM C160_TRANSACTION_CALL. Let's see if this works.
OR
Create a custom program that calls your custom transaction code.
Hope this helps.
Benedict

Needing Help with color setting for Photoshop 4 + imac

Hi, Is anyone able to assist me please. To cut a long story short. i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing. So my problem is .... I had some prints printed today at Fuji and the prints have come back dark and just not up to scratch. I know that it is not Fuji, but my settings. I had someone set up my imac and Photoshop last time, but this time i will have to do myself and i just don't know what to set them at. Can anyone help please. Not sure if you need this info but i am in New Zealand. many thanks in advance.

Being in the business of printing other people's image files, I can say without any doubt that the advent of digital image processing has definitely muddied the waters to a much greater extent than was the case when printing negaive film. I'm also a shooter, and have been using such programs for many years, so I can understand the desire to manipulate your files before sending them to the lab. Color negatives never had "Profiles" attached to them. If the proper film was used for the lighting conditions, it was simply up to the lab to make sure the resulting print was in balance, both in color and density. It was also the lab's responsibility to maintain a degree of quality control that would make all of the above possible and repeatable. I have to agree with the other response to your question. Whether or not you have an embidded a profile, it's always the job of the printer to make sure the final print is up to a certain standard of quality. If that is not the case, find another printer. Unless you have indicated that your files should be printed without any corrections, the oweness belongs to the lab/printer. I do have a few customers whose work I can print with very few corrections, due to the fact that they have calibrated their displays and have a very tight workflow. However, the vast majority of files that I print require a considerable degree of correction, that's my job. It's also the job of your lab/printer and if they are nor satisfying your needs you have to find someone who does. I have printed many files that have no profile embidded and I simply convert them to my working color space(Adobe RGB 1998). If you are concerned about doing color settings, this is the obvious place to start. Create a custom space and make sure your working color is set to Adobe RGB 1998, not sRGB. Adobe RGB 1998 is a considerably larger color space with a wider gamut and will allow for more choices and a wider range when it comes to processing the image. Pro Photo RGB is an even larger color space, but one that is seldom used at this time. I suspect it will become more popular in the fairly near future, as other technologies continue to push the color gamut envelope.
So, I guess the gist of all of this is that you need to either have your lab/printer redo the dark prints, or find someone who knows how to print. And equally important, someone who cares about your work as much as yo do.
I am attaching a screen shot of my color settings and I would suggest this might be a good place to start.
Gary

Is there a global background color setting for all apps?

This pertains to a DESKTOP COMPUTER uisng 10.7 (Lion) - not iPad or iPhone or iXyz
I've spent the last half hour on the forums but each talk about a SPECIFIC application's background. I'm tired of staring into a WHITE lightbulb when switching applications.   Most professional applications (like final cut pro or photoshop) have a dark grey or beige background that is restful on the eyes.     That is usually easily set by navigating preferences.   Top web pages know how to use dark backgrounds to make the colors really stand out.
My question pertains to a GLOBAL setting so that ALL applications have the same background color (unless specifically set within).   Windows had this for over a decade. Is Mac behind Windows?   Seems like this should be under Settings==>Display or Desktop (but I can't find it).
I've seen discussions about creating a rectangular window (I presume in Photoshop) then saving it as "template" -- but there is no save-as "template" setting in Photoshop or WHERE to put it -- or active the template.   Lots of missing instructions if so.
This ain't rocket science fellas -- could one of you geniuses point me in the right direction with some SPECIFIC navigation (ie: go here, click this, save that, do this).
Thanks for your time & thoughts.
-Dale

You're confusing being behind Windows with "don't want to". I'm sure Apple's engineers could add the ability for users to play with the desktop theme if they wanted, but they choose not to. They never have.
However, there are third party options for that. This one looks pretty interesting. Flavours is another.

Color setting for custom reports in Grid Control

I created a report in GC (chart from SQL) which works fine.
I like to adjust the colors for the report. Is there any possibility to do this?

Which version of EM are you using? The native reporting tool does not support changing colors.
In EM 12, we added support for Oracle BI Publisher which is a more advanced reporting tool and allows more design options.
More details here: http://www.oracle.com/technetwork/middleware/bi-publisher/overview/index.html

Output type setting for MB1C transaction

Dear All,
I have to attach a custom SAPScript in the output type so that when the goods movement will be done through MB1C transaction, the SAPScript will be printed. Can you please help me out how to attach to the output type. I assume the printing through output type will be done through Other Goods Receipt --> Process Output.
Thanks and regards,
Atanu

Hi Atanu
Use the below IMG path.
IMG->Materials Management -> Inventory Management and Physicial Inventory -> Output Determination -> Assign Form and Programs.
Here we assign the form and print program to the output type.
Alternatively
1. You can use transaction NACE
2. Select Applicaiton ME for Inventory Management
3. Select the desired output type and then go for Processing Routines.
Here we assign the form and print program to the output type.
Kind Regards
Eswar

Color setting for I/O field

Hi,
I am using I/O field in screen painter.I need to color is with green or yellow etc...can anyone tell me how do i do that?
thanks
Suganya

You can't use "colors" in Dynpro...Maybe, Gray and Blue (By clicking Visible on the component properties)...
Greetings,
Blag.

User Trace for particular Transactions

Hello
Some one change some entry data in transaction code OX18...we want to trace that USER ID
Help

Hi ,
Please follow the process hope this help you: ST03N>Workload(First selection> your application server->time Period(day ,week month)-> click on that>Analysis view (lowe part of left hand side of screen)>Trasactional profile -> standard-> double click any transaction.
Regards,
Pankaj

Extended VO for particular responsibility

Hi
I am extending a VO which I want to set for particular responsibility
How can this be achieved
Regards
Krishna

Krishna,
Extension VO/AM/EO is done only at site level.
I suggest that you should pass responsibility_Id/responsibility_name as parameter in the whereclause of the VO Query.
Thanks,
Kumar

Color setting for particular transaction

Similar Messages

Maybe you are looking for