Color setting message

After we started to use script that each time reinforces color settings that are saved on a server, we started to get a message:
"The current color settings file has been modified outside of InDesign. Do you want to synchronize..."
This message is irrelevant to us, because script will reinforce correct settings next time no matter what choice we make. But the message doesn't have the option:
"Don't show again"
and it keeps popping up endlessly.
Is there a way to make it stop to appear.
Thank you very much for your help.
Yulia

Inside The Photoshop, In the Color Setting, If I choose RGB: ProPhoto, and Save my setting for example To: MY SETTING PROPHOTO,
Later, Inside the Bridge, Color Setting, I can see MY SETTING PROPHOTO, And If I select that, then every-thing is ok. It shows every thing Is synchronized.
This Is my question:
Do I need to save a custom setting name, so In order for the Bridge can see that setting ?
I noticed If I don't save a Custom Setting In Photoshop, The Bridge dose not have any ProPhoto Setting by default.
Inside Bridge It Has the following Settings:
Adobe RGB 1998
Monitor Color
North America General Purpose 2
North America Newspaper
Thanks.

Similar Messages

Script to Set Color of Messages

Hello -
I am attempting to add a script to add on to a Mail Rule to color messages a certain color if a certain email address is in any recipient field.
The mail account is an IMAP account, and the folder the Rule is moving the messages to is server-side, but the Rule is local in Mail.app.
Since the Mail Rules do not allow for nested statements and actions, I cannot change the color by the Rule.
When I tried to add a second rule to add the color if the email address was in any recipient field, it wouldn't work. I changed the criteria a couple times, but it still failed to highlight all of the emails by the color.
I tried creating an AppleScript, and it's not working. More than likely it's because I'm a complete idiot when it comes to writing scripts, but I tried using the Dictionary for Mail in the AppleScript Editor, and I still can't figure it out.
My script currently looks like this:
tell application "Mail"
if message mailbox (team) and to recipient ([email protected]) then rule color message (green)
else default 0
end tell
When I attempt to Compile, I get an error stating "Syntax Error Invalid key form."
The cursor goes to the front of the script.
Can anyone tell me what I'm doing wrong?
Thanks.

After reading the referenced discussion thread and /Library/Scripts/Mail Scripts/Rule Actions/Sample Rule Action Script.scpt, here is the current version of my script:
using terms from application "Mail"
    on perform mail action with messages theMessages in mailboxes "team" for rule "team"
        tell application "Mail"
            if to recipient "[email protected]"
                set background color green
            end if
        end tell
    end perform mail action with messages
end using terms from
When I attempt to compile that, I receive an error stating "Syntax Error A application constant or consideration can’t go after this property.", and background color green is highlighted.
According to the dictionary for Mail, this should work.
Changing the line to "set message background color green" returns the original "Syntax Error Invalid key form." with nothing highlighted, but the cursor at the beginning of the script.
I'm still lost :-/
Thanks,
Avagdu

How to use single key to color a message in Mail.app?

I would like to be able to color code a message's line in the main message summary window by pressing only a single key. In thunderbird, this is accomplished by pressing 1 to 5, each corresponding to a different color.
Mail.app allows coloring a message, to my knowledge, only by bringing up colors chooser and then selecting a color (by default in a inprecise color wheel).
How do a make "hot keys" for specific colors?
thanks

To answer my own question: Leopard and Mail.app don't suport this directly.
What works is using Fastscripts Lite to bind application-specific hot keys to some simple applescripts.
Here is one such script, modeled on an Apple sample script:
using terms from application "Mail"
tell application "Mail"
set selectedMessages to selection
set selectionCount to (count of selectedMessages)
repeat with messageNumber from 1 to selectionCount
set theMessage to item messageNumber of selectedMessages
set background color of theMessage to green
end repeat
end tell
end using terms from

How to bold/color text message in Module pool Programming ?

Hi All ,
I need to bold /color a message in module pool . this message will come when certain conditions satisfied , currently this text message is displaying through variable . I Refereed program DD_STYLE_TABLE , but still not getting desired output . .Is there any other way to achieve the same ?
Could you please help me ?
Thanks in advance !!!!
Regards ,
Mayank K

Hi Mayank,
You can give a try this.
Within the screen you are calling give keyword
Leave to list processing
and then you can give whatever colors which are there in SAP
For making the text bold you can set Format intensified on or off depending on your requirement.
For more details you can refer to programs
program1 : demo_leave_to_list_processing
program2: demo_call_screen_from_list
Regards,
Sandeep Katoch

Color Setting Issues: CS6

Loading or syncing color setting files results in different cm policies among the CS apps.
Even when loading the canned CSF's.
Example:
Load one of the defaults (i.e. North American Prepress 2) into Photoshop and the cm policy for CMYK is "preserve embedded profile".
However, load the same default into InDesign and under the same policy is "preserve numbers (ignore linked profiles)". Same goes if you customize a CSF and either oad it manually or sync it in Bridge.
That's an important difference if your company is trying to practice color management.
Assuming I'm correct about this, and there's something broke, think Adobe can fix it?
one more thing...Seems CS6 now supports Grayscale, which is great, but why can't it retain the embedded profile in the file?
Again...Assuming I'm correct about this, and there's something broke, think Adobe can fix it?

Tom,
let me start quoting the help text:
InDesign Help
--- Start
Preserve Embedded Profiles
Always preserves embedded color profiles when opening files. This is the recommended option for most workflows
because it provides consistent color management. One exception is if you’re concerned about preserving CMYK numbers,
in which case you should select Preserve Numbers (Ignore Linked Profiles) instead.
Preserve Numbers (Ignore Linked Profiles)
This option is available in InDesign and Illustrator for CMYK. Preserves color numbers when opening files and
importing images, but still allows you to use color management to view colors accurately in Adobe applications.
Select this option if you want to use a safe CMYK workflow. In InDesign, you can override this policy on a per-object basis
by choosing Object > Image Color Settings.
Using a safe CMYK workflow
A safe CMYK workflow ensures that CMYK color numbers are preserved all the way to the final output device, as opposed
to being converted by your color management system. This workflow is beneficial if you want to incrementally adopt color
management practices. For example, you can use CMYK profiles to soft-proof and hard-proof documents without the
possibility of unintended color conversions occurring during final output.
Illustrator and InDesign support a safe CMYK workflow by default. As a result, when you open or import a CMYK image with
an embedded profile, the application ignores the profile and preserves the raw color numbers. If you want your application
to adjust color numbers based on an embedded profile, change the CMYK color policy to Preserve Embedded Profiles in the
Color Settings dialog box. You can easily restore the safe CMYK workflow by changing the CMYK color policy back to
Preserve Numbers (Ignore Linked Profiles).
You can override safe CMYK settings when you print a document or save it to Adobe PDF. However, doing so may cause
colors to be reseparated. For example, pure CMYK black objects may be reseparated as rich black. For more information
on color management options for printing and saving PDFs, search in Help.
--- End
My opinion:
It seems, InDesign uses despite the synchronization via Bridge Preserve Numbers instead of Preserve Embedded Profile for safety.
Personally, I would use for one project just one CMYK space:
a) convert in Photoshop all images RGB-->CMYK using this profile and embed the profile in each image
b) make document in InDesign with Preserve Numbers
c) export as PDF without profiles, but with output-intent for this profile (PDF-X1a)
InDesign (even CS6) ignores Gray profiles for viewing and doesn't embed them in PDFs, see (1).
IMO, the only accurate workflow is this one:
a) convert images to Grayscale using a "black ink profile" which is derived from the project CMYK space
b) place Grayscale in channel K of otherwise void CMYK file
c) export as PDF as above
(1) Discussion (including CS6):
http://forums.adobe.com/message/5483198
(2) Test (CS2):
http://docs-hoffmann.de/colpdf27022008.pdf
(3) Testpattern:
http://docs-hoffmann.de/riptest05072013.pdf
Best regards --Gernot Hoffmann

How do I sample color from a photoshop image and apply it to an Encore menu color sets

I'm about 3 months and many hours of tutorials into Premiere ProCC, Audition CC, and Encore CS6. Apparently the nifty dynamic links from PPro and Audition CS6 no longer work with encore, as encore was not upgraded to CC. So, I want to sample color from an original photoshop image, and create an Encore menu color set, so that my menu bttons, etc. are colored to match the main photo image in the menu. Is there an eyedropper kind of tool in Encore that would let me sample the color from the image, and then apply that to color swatches in the Encore button layers? If there is I can't find it! ~Thanks!

Strangely enough, I started a thread on this issue a few days ago in the Creative Cloud forum. I had to uninstall all my pre-CC adobe software to get the Application Manager in sync with the CC apps, so when I tried to use Encore, there it was gone. So I reinstalled PremPro CS6 just to get Encore back, but when I right clicked a menu in Encore, as asked to Edit in Photoshop, it threw up an error. The consensus was that Encore CS6 would know nothing about Photoshop CC, so after much time searching for a fix, my only option was to either reinstall Photoshop CS6, or do it manually.
I took the latter option using Windows 7 to search for the menu, and open/with Photoshop CC. Stan Jones, who is the Encore equivalent of our Noel, mentioned a brick-bat, but I just saved the edit file and dragged it into Encore, and it worked fine
The afore mentioned thread can be found here
http://forums.adobe.com/message/5565789#5565789

Creative Suite Color Setting

I have Adobe CS6. When I go to my Adobe Bridge's Creative Suite Color Setting (under Edit Menu), it says "Suite Color Management is not enabled, Suite Color Management Requires a qualifying product launched at least once to enable this feature." I opened PS, ID, IL with no help. How do I solve this problem? Also Bridge's Camera Raw Preferences displaying the same error message. Please help.

Hi
Thanks for the info, do you think it would be possible in future releases?
Also im now thinking, if i take out all the csf files creative suite has installed and just leave my custom made one. Then bridge has to sync this one fir all adobe apps right?
Plwase let me know what you think?
Thanks
M
Sent from my iPhone

I'm trying to change a color setting in bridge

I'm trying to change a color setting in bridge and I get the following message "Suite color management is not enable"
How do I enable it???

I'm new to CS4 and bought a book called "Adobe Photoshop CS4 one-on-one and when installing it it has me change the color settings in Photoshop which I was able to do. Then it tell me if I own the full Creative Suite 4 to change the setting in Adobe Bridge. Question, I have Adobe Photoshop CS4, is that the full Creative Suite Package??

Imported 40,000 emails - what does "updating color for messages mean"

I have just imported 20 MBOX files from my outlook 2011 - a fair amount of emails!!
But I'm finding that when I click onto the folders, I am getting nothing in teh preview initially sometimes and... some of the folders begins some kind of scan? progress in activity panel say: "updating color for messages"
Any idea of what is going on? I am new to Mail 4.5...
I will probably be upgrading tomorrow to lion, so perhaps it won't do this anymore after that?

ok thank you.
on another note, does rules actually work? you see I have all these Mail Boxes in Mail now. and I set up a rule so one of my guy's emails goes into their folder when hey send me an email and then when I send to them? but its just not happening? see:
Any ideas?

Convert Profile from color setting

HI
please help me
How to change rgb to cmyk profile change
i want change cmyk particular color setting in script

OK I think your a bit confused about Color Profiles and Color Settings "North America General Purpose 2" is a not a Color Profile it is a names set of color setting Adobe shipped with Photoshop. Changing a color setting will not change the documents color profile. If you look at the Working Spaces settings you see four pull down menu for Profiles. If you move the mouse cursor over RGB:, CMYK:, Gray: or Spot: You will see a description at the bottom of the dialog. If you move the mouse coursor ovet a profile you will see a description for it in the description setion. These are the profiles Photoshop will use when you use menu Image>Mode>Working Space to switch between working spaces. You can save color setting the way you want and give the set a meaningful name and description. The other way convert to a diffrent working space and profile is the use menu Edit>Convert to Profile... the dialog I posted. This will change the documents current working space. To change a document color space in a script you use ConvertProfile.
Here is my color setting. You can see I saved four sets of setting for myself. Two are for the ProPhoto RGB color space one with Prompts on the other one with them off.
Message was edited by: JJMack

Get/set message Queue ID in PI 7.1 Adapter module

Hello,
I have a special requirment to get and set message Queue ID in PI 7.1 adapter module.
I tried to use the method setConversationID for the Message Class, but this doest seem to available any more.
Any pointers to which class and method can be used.
Thanks in advance
Regards,
Abhishek

Hi, try [setSequenceId|http://help.sap.com/javadocs/pi/pi711sp03/com/sap/engine/interfaces/messaging/api/Message.html#setSequenceId(java.lang.String)]. Maybe you have to use setDeliverySemantics before in order to set EOIO.
regards, Martin

Color setting in CS5

What should I set my color setting to...Europe General Purchase 3? My other computer has North American General Purpose 2 but I can't find it on the first computer? tired I guess. Should I be in SRGB or RGB. I mainly shoot portraits and sports but I want to learn photoretouching. I have PC's...do I need a Mac or can I just update on PC?

Wow, you ask for advice without providing relevant information … and the names (»Europe …«, »North American …«) alone might have been a give-away that in different regions of the world different standards are common.
Should I be in SRGB or RGB.
What do you mean by »RGB« as opposed to »sRGB«?
RGB is a Color Mode, sRGB IEC61966-2.1 is a Color Space – which makes a big difference in meaning.
Mylenium’s advice to read up on Color Management obviously applies.
One occasionally recommended site is
http://www.gballard.net/psd/cmstheory.html
But the Photoshop Help also offers a chapter »Chapter 4: Color fundamentals« that could be worth your time.

Color setting

In Cs2 the color setting I have is North American General Purpose 2 but in Cs5 that is not listed but Europe General Purpose 3 is. Are they the same or how can I get them the same...rookie question I am sure.

i think the most important Adobe color settings "Preserve Embedded Profiles" and alert us of "Profile Matches" and "Missing Profiles"
these are how i would start a 'rookie' out:
with these two hard-fast general rules:
always use the embedded profile and Convert to the desired Working Space (if needed)
if the file is untagged, first Edit> Assign Profile (the one that looks best on calibrated monitor)
always embed the profile (apps that don't use embedded profiles will just ignore it)

Can we enable "Select record Set Message choice" of Table in left side

Hi ,
I have requirement to set the "Select Record Set " Message choice of a table region on left side.
Ex:If there are more records in a table region and message choice available to select next set of records.
You can chk in Workflow Status Monitor function.
Its the Navigation Bar to be @ left side on the table Region whcih allows you to navigate the records set.
Thanks,Sarath.
Edited by: SarathL on Dec 13, 2011 4:59 PM

Hi,
Not sure what exactly you are looking for.
The Next link and option to select next set of rows comes to your OA Table by default .. isn't it?
-Idris

Exception at setting message priority email messaging driver

hi guys,
i have a email polling process.
and some times at the WLS console i get this exception
<21 Mei 13 10:31:46> <Error> <oracle.sdp.messaging.driver.email> <SDP-25700> <An unexpected exception was caught.
java.lang.NumberFormatException: For input string: "3 (Normal)"
        at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
        at java.lang.Integer.parseInt(Integer.java:458)
        at java.lang.Integer.parseInt(Integer.java:499)
        at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter$Worker.setMessagePriority(EmailResourceAdapter.java:1607)
        at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter$Worker.onMessage(EmailResourceAdapter.java:1405)
        at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter$Worker.onMessage(EmailResourceAdapter.java:1232)
        at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter$Worker.getNewMailFromStore(EmailResourceAdapter.java:1198)
        at oracle.sdpinternal.messaging.driver.email.EmailResourceAdapter$Worker.run(EmailResourceAdapter.java:1157)
        at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
        at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
        at weblogic.connector.work.WorkRequest.run(WorkRequest.java:95)
        at weblogic.connector.work.LongRunningWorkRequest.run(LongRunningWorkRequest.java:29)
        at java.lang.Thread.run(Thread.java:662)
>so where is the "3 (Normal)" configuration come from ?
i check the EM email messaging driver and can't find the set message priority configuration.
thanks

i just found it at the .task file that has a message priority configuration
the drop down showing "3 (normal)" value, but if i check it to the source tab. then it just fine
<priority>3</priority>so am i necessary to change the "3 (normal)" value ? and how can i change it ?

Color setting message

Similar Messages

Maybe you are looking for