Color shift from one monitor to the next (CS5)

I'm having a strong color shift in Photoshop going from one monitor to another. It's not a calibration issue because the color shift persists when I drag the window from one to another until I do something with the window, then it will shift (i.e. not exactly when I move the window). I'm essentially experiencing the problem described here, only I'm on Photoshop CS5 and his solution doesn't apply because that option is not available.
Windows 7 64bit
Photoshop CS 5 (12.1 x64)
Note the color change, one part of that image is on one monitor, and the other part on the other. (The left is the correct color fwiw.)
I'm guessing there's just some setting somewhere I can toggle?

Thanks for the input Mike, however it doesn't help me. I'm actively working with both monitors and I need the colors to be accurate on both in order to do my job. I'm hoping there's a setting much like there was in CS4 (see my link in original post) so that I can get both monitors to behave the same.
I should also mention that this problem is unique to Photoshop, I do not have this color shifting problem in any other program (including, for example, Acrobat Reader).

Similar Messages

  • How to move apps from one screen to the next?

    In order to organize a bit the screens after installing several apps, how can we move them from one screen to the next?
    I've found it possible to place them in the lower bar and then replace them into the required screen but that's very slow...
    Any other way?
    Also, is it possible to place the apps where we want and not get them automatically reorganized (blanks filled)?
    Thanks,

    Sorry I guess the correct terminology would be 'virtual desktops'.
    You pass from one virtual desktop to another swiping left or right on the phone.
    I would like to switch conveniently an app (icon) from one virtual desktop to another.

  • How do I get text to flow from one page to the next in Pages 5?

    How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

    What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
    One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
    If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
    Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
    And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
    Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

  • Can't get iTunes to move from one song to the next

    I'm using iTunes 7.3.1 on an iMac with OS X 10.4.10. Everything was working fine, but now I can't get the playlists to move automatically from one song to the next. All the songs play if I double click on them individually, but when a song is finished playing, iTunes does not move automatically to the next song. I have to then double click on the next song I want to play. Furthermore, neither the "next," nor the "previous" track functions work. I have tried fiddling with the control settings (Repeat Off, Repeat All, Repeat One), but nothing I have tried makes a difference. Bottom line: If I want to sit at my computer and hear a playlist on iTunes, I have to manually click on each song I want to hear. Not too convenient when I want to listen while walking on my treadmill! Anyone suggestions would be appreciated.
    iMac   Mac OS X (10.4.10)  

    Have the tracks become unchecked? iTunes will skip unchecked tracks, so if they're all unchecked, iTunes will play one and then stop. If this is indeed the case, re-checkmark the tracks - Command-click on any checkbox will select or unselect them all - and you should then have continuous playback.
    Hope this helps.

  • Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    Is it possible to have the same audio clip be playing nonstop between menu's in idvd '11? I want to be able to go from one menu to the next without the audio cutting out on me. Thanks for any support! I have tried searching the forrums but no luck yet.

    No.
    OT

  • How do I stop iPod on my iPad from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop.

    How do I stop iPod on my iPad 2 from automatically advancing from one song to the next in my music library or in a playlist? I want iPod to play one song and then stop until it's told to play the next song. In iTunes I can uncheck the checkmarks next to songs, but I can't see where to do that on the iPad 2.

    How to use your iPod to move your music to a new computer

  • How to copy data from one transaction to the next (F-43)

    All,
    I have a situation where it appears the due date of an invoice is being copied from a previous invoice entry.   Can anyone tell me is there a process where the user can have data default from one invoice to the next and if so is the due date (planning date) one of those fields?  
    Thanks
    Sandra

    I understand how it is supposed to work.  However, I have production examples of that not happening and I'm trying to figure out how.   The only way I have been able to replicate the issue is when I manually enter the due date when entering the invoice the calculation of baseline date + #of days does not happen.   Users say they are not manually entering a date so I'm trying to find a way the date could be entered without the users knowledge.  
    Regards
    Sandra

  • Why can't I save Tab Groups from one session to the next? When I restart, tab groups are cleared.

    Why can't I save Tab Groups from one session to the next? Is there a way to save Tab Groups from the last session to the next time I start up?
    Mark Kipperman

    Yeah, if this is the way it's supposed to work its a useless and, dare I say, stupid "feature". Wouldn't the whole point of this be to have quick access to groups of pages. If I have to select them each time to create the group what is it doing for me?

  • I am really pisssed off at two characteristics of Firefox 4: Size and position do not stick, and view menu selections do not stick from one use to the next.

    I am really pissed off at two characteristics of Firefox 4: 1) Toolbar selections don't stick and 2) firefox window position and size settings do not stick from one use to the next.
    The Bookmarks toolbar is the selection that does not stick, and Firefox, even though I set it to the size and position I want every time I use the program, always loads flush left, full top to botton, and about 1/3 of the width of the screen EVERY TIME it loads. These two characteristics are extreme pains in the ass.

    This problem occurs on the Juno webmail site?
    I assume you are doing something different than just correcting the squiggly red underlined words. How are you spell-checking the email: using an add-on or using a feature of the Juno webmail site? If it's an add-on, which one is it?

  • TS2634 my iphone 4s wont slide from one screen to the next and I have to double tap on an icon to make it work. How do I fix this??

    My iphone 4s wont slide from one screen to the next and I have to double tap on each icon to open it. I can hear siri talking and telling me what each icon or button I press is. How do I fix this problem? I have restored my phone to last saved but the problem still remains.

    My problem was fixed via your suggestion. Thanks. Then I heard, though it hasn't been substantiated by anyone I know, that pushing the the round "start" button after the unit is on three rapid times will solve the problem. Do you know if this is valid info?
    Message was edited by: wallyintouch

  • ITunes--can't get a book on CD to go from one track to the next

    I have 12.01 and Yosemite on a MacBook Pro. I had no trouble playing audiobooks on CD in previous versions, but now it will only play the same track over and over; I have to manually tell it to proceed to the next track. How do I tell it to play each CD from start to finish?

    I'll rephrase my question since there's no response on my previous one.
    How come the songs on my iPod play one song only and repeats it again without automatically going to the next song on the cd/collection.
    At first, all went accordingly but I don't know what I did that they now don't play automatically but has to be done manually from one song to the next.
    Thanks!

  • Deploy from one system to the next

    I have built an intranet application in HTMLDB for a client, and they are asking me for an easy way to deploy the applcation from one system to the next, say from develop to test and then from test to production.
    Their wish is to do this with the push of one button, now I know that that is quite hard to realize, but I'd like to know how you people do that. Right now all i can think of is remember what you changed, export it and import it into the new application, but that's quite a hassle.
    I found the export script in the utilities, but I haven't look at it closely enough to be able to reverse that process, is that the way it should be done?
    Wendy

    I can't believe that we are at version 2.0 now and
    that there is no decent solution to export and import
    what we made as a whole instead of all these separate
    things.Sad, but true.
    I have to explain to my customers who want to be able
    to work with HTMLDB that when they want to deploy an
    application from one environment to the next they
    have to:
    - export an application
    - export the css files
    - export the images
    - download the static files (because they can be
    exported but not imported(!) )
    - create a ddl of the schema
    - export csv files from the data in the tablesSounds like an opportunity to write a new utility. ;>)
    and then import it all one by one in the new
    environment
    and then hope they didn't forget anything and have to
    debug to find the differences between environments.
    Am I the only one that is running into this problem?No. Anyone that's developing and deploying production apps is in the same boat. Obviously, there are varying tolerances and circumstances that make this more or less of a pain for each of us.
    I am solely talking about the stuff in the database
    now, not the files on the filesystem.....If it's all in the database (which we know it is) then you can certainly bundle all of those steps into a nice little package (pun intended). Let us know how it comes out!
    Earl

  • I am havig an error while shifting from one tab to the other mozilla firefox stops for some seconds.

    error while shifting from one tab to other''''''

    I've followed what I can of that error, and from what I'm reading, your hard disk is doomed. Some people report that they've been able to reinstall OSX on the same disk and use it for as long as a few months, but eventually the error returns.
    Here's what I suggest:
    Step 1: Backup everything you want to keep immediately!
    Step 2: Buy new disk.
    Step 3: Install new disk.
    Step 4: Reinstall everything & restore.
    I highly suggest backing up as soon as possible. -- On the first day of this error my MBP would no longer boot. Thankfully, I was able to save most of my stuff using the terminal window available in the installer.
    Searching for that error code here & on google returns a fair number of hits so you can read what others have done as well. Some seem to be able to get a new drive from apple if it's still under warranty.
    Good luck!

  • How can I make a homemade video on iDVD transition from one chapter to the next?

    For example, I usually have 4 chapters for my projects.  I coach basketball so each chapter represents a quarter.  When quarter 1 ends, it goes back to the menu...rather then going right into quarter?

    Hi
    Not 100% on Your question - but may be this helps.
    Play all resp. one chapter at a time
    Play All Button
    1. There are NO - Play All - button in any version of iDVD
    2. It can be faked in several ways
    Easiest and most fault proof way is to make a doublet movie containing All and with
    Chapters set to match. It will take up x2 space but is easy to understand and produce.
    Cons: Tried this in iMovie’11 by Exporting out each part as a full Quality QT.mov then Importing back into new events and putting these into a new project (Play All project). Resulting DVD had Audio that was OK (as parts) - BUT the picture was very bad and standing photo were cut of in height. So the Play All movie has to be created from same material and exactly in the same way as the individual parts + then Chapters has to be set to match.
    • It's said that one can put all movies into a Photo/SlideShow and this will also
    give the function of a Play All button - Tested - and ONE HAS TO un-cheque - Scale pictures to TV-Safe area else it will be a black frame all around and a small picture !
    Mike Evangelist1
    You might be able to get close to what you want by using a slideshow in iDVD. (It's not widely known, but you can put videos in a slideshow.) If you set the slide duration to manual, playback will pause after each movie/slide, and you can continue with the 'next' button.
    3. Using another program to do this e.g.. Roxio Toast™ where there is a Play All button option.
    Summary
    a. Making a Play All movie with same care as the individual Part movies - gives a very Good Result
    b. Using Roxio Toast™ - also an usable way to go
    Yours Bengt W

  • My documents and pictures have been erased from one day to the next

    I've closed my macbook pro last thursday without shutting down, the next day when opening again all my documents and pictures have been erased from my files. I cannot find them anywhere, and they are also not in the recycle bin. Has anybody else had this problem recently and does anybody know how I can recover my files? All my pictures from my little son birth from last year until now are gone!

    Have you checked with your email provider?

Maybe you are looking for