Color shift when exporting to tiff

Hi,
I have a vector image which I created using multiply transparency layers, however when I export it to tiff or import it to psd, the color changes (it gets darken). The ai file is in cmyk.
The image is intended for print and will most likely be place in a word document. How should I set the color setting/profile so that I could get a consistent color across the different file formats?
Thanks so mcuh for you guys help!!!!

Hi Kwaim
Please do a test:
You take an object and set multiply to interact with others, ok? So select that object and all object underneath influenced or token by multiply. Go to Object > Rasterize. Select high for the resolution.
After process, color changes?
If yes, stop and report me
If no, try exporting to tiff and tell me results
Gustavo.

Similar Messages

Color shifts when exporting a picture sequence in both FCP/Compressor

For a project I had to make a movie from still images. I imported the .tiff files and edited them in the right order. Then I added transitions and motion to the images (zoom in or zoom out). When I playback the sequence in Final Cut Pro everything looked perfectly fine. But when I exported to Quicktime... from both Final Cut Pro itself as from Compressor I got strange color shifts. I rendered like 10 times and every time two or three photo's were affected with a purple/blueish haze over them. Finally, the 11 time I tried it rendered as it was supposed to. It felt like playing Russian roulette.
The question that is bugging me: what can have caused this?
I tried both HDV and ProRes as timeline setting. What is the best setting for working with still images? And is .tiff the best format to work with or can I better convert to .png or .jpeg?
I hope someone can tell me what happened that horrible night.

The problem is that you haven't answered Jerry's question. it is very difficult to troubleshoot these sort of questions from a distance if you don't systematically check for the obvious things. Jerry is one of the best resources here and if he suggests a possible solution, it's a good idea to explore that first.
Message was edited by: Michael Grenadier

Color shift when exporting to sRGB (mac)

I just noticed the following: when I export an image (shot with my Nikon D80, RAW, developed from within Lightroom 2) as JPEG, 100%, sRGB color space, I get a strange color shift towards red, more saturated colors. Everything looks great when I view my image after export from within Finder or Apple Preview. However, when I drag that same file into the browser (Firefox) or then order prints from a photo service, the heavy red color shift is noticable. I've attached an image for you guys to see what I mean.
What am I doing wrong? Can someone please help?
I'm thinking that it might have to do with my color calibration? (I calibrated my monitor using the Spyder3 Elite device)
Edit: By the way, I just turned off my color calibration (changed display profiles), but that didn't fix the problem. Also, the color shift is not visible in Safari (I guess it is able to handle color profiles and Firefox isn't). But still, the color shift is there if I upload photos to a photo printing service and order prints. So, maybe there's something wrong with the color profile that Lightroom embeds in the JPEG file??

Problem continues (2)...
...from both Nikon and Canon RAW sources (I use a 5D MkII), but is it an LR3 issue or a Mac issue? Having read all the posts, I'm still struggling, but here's my contribution.
A while ago I noticed that colour files, once uploaded to the net, were way too red and saturated as per image below. Resolutions attempted so far below (all to no avail):
Tested different web browsers; found Firefox and Safari to be similar (to each other), Chrome very much brighter, but none of them are even close to original, so I'm not sure the Firefox loss of colour management mentioned by another contributor explains the issue.
Change web display vehicle; I find the same on my new web site as I did on Jalbum and various others.
Calibrate monitor (of course). Screen to output is 99% perfect on this monitor, when soft proofed with correct ICC profiles, so I very much doubt the wide gamut monitor is at fault. (I do find it hard to agree with the notion of it being the wide gamut screen. The whole point of a wide gamut screen is that it cn show a wider range of colours (e.g. in Adobe 98), and when an image's colour space is reduced (e.g. to sRGB) a wide gamut screen can still show that - especially if it is the same screen that didn't have this problem a year ago...).
Looked at images on a narrow-gamut screen. Same problem.
Changed colour space from Adobe 98 to ProPhoto in LR3 & CS3. Suspected mismatch between LR3 and CS3 because RAW files converted to DNG and edited in LR3, then pixel edited in CS3 and returned to LR3, come back in a different colour. Using ProPhoto has resolved that particular problem, but made no difference to faulty JPG display once on net.
Tested JPG conversion compared to other file formats; match between JPG and original RAW and PSD files perfect, whether displayed in LR3, CS3 or Preview, and whether exported to JPG from LR3, CS3 or Bridge. Problem definitely only occurs once images are on web.
Does anybody know anyone who doesn't have this issue and is using LR3 on a Mac with CS3 and OS 10.5.8?
Any updates or new ideas most welcome.

Color Shifting when exporting AVID DNxHD

Hey everybody,
I'm stuck. I have been have warp stabilization problems in Premeire CS6, so now Im using AE to do the work.
Im noticing that when I export my clips using Quicktime - Codec DNxHD, 1080p, 23.976, 175, 10 bit. Color Space 709
When I re-import the clip back into Premiere the colors are darker. I'm not putting the clips into another program,
just render files out of Premeire (DNxHD) and import them back in.
I really need help, I'm having to manually color correct the footage to match the original footage.
The project footage is Canon 7D H264. Plus Premeire CS5 didn't have this issue.

You're welcome!
For now you can try either Lagarith or UT:
Lagarith: http://lags.leetcode.net/codec.html
UT: http://www.free-codecs.com/download/ut_video_codec_suite.htm
Both codecs are free!
/Roger

Color shift on Export

I am getting a slight color shift when I export or open in Photoshop CS3. It is very similar to the shift that happened with Bridge CS3 beta before they updated it. The shift seems to be a decrease in brightness, color and contrast.
My settings in Lightroom for open in Photoshop are to use TIFF, 16 bit, ProPhotoRGB, no compression. CS3 is set for ProPhotoRGB as working color space.
Any thoughts on this color shift. I can't get a decent print either, might be related. My monitor is calibrated and profiled.
PS, I looked for this in other threads but couldn't find it. Sorry in advance if this is already being discussed.

Sorry mate have no idea with PC's, hope someone will see this.

Big Color Shift between exported H264 mp4 and Program Monitor

I get a big Color Shift between exported H264 mp4 on Vimeo/Youtube and Quicktime X and Program Monitor.
There are quite a few posts on Quicktime gamma issues, but there seem to be no solutions and the other editors I know don't seem to have this problem.
I know there will be a bit of a shift but this is MASSIVE. At the moment I add a whole extra adjustment layer to all my clips to get it approximately right, but ofcourse this does not solve the issue nor does it give proper results.
Please do not reply with the "You need a real reference monitor via SDI etc etc ..."
By my logic on the same screen the program monitor should resemble what is going to be the final result in a relevant player like Quicktime X which all normal apple consumers use to watch their films. I know VLC and Mpeg streamclip gives different results, but mostly when playing Quicktime/h264 files Quicktime will play it thus average users ( the people I'd like to downwload/buy my films )will watch it in Quicktime.
Furthermore, Quicktime X's gamma/color looks very similar to the image I get on Youtube or Vimeo - which is where all my current work is going. I'm not outputting to boradcast or DVD etc.
Strangely enough the MPEG 2 stuff I've done for DVD matches the Youtube output with the Program monitor.
What am I doing wrong?
I have a Dell 2711 wide Gamut Display which is calibrated with an SPyder 3 Elite using its full colour gamut ( close to 90% of Adobe RGB - thus bigger than sRGB or Rec709) Could Premiere be ignoring the calibration in the Program monitor and making the image values 16-235 and then Quicktime uses all values 0-255? If so, how can I fix this?
Any help will be much appreciated!

I know this has been a while so hopefully you found some help by now, but maybe this will help anyone stumbling across this.
What people seem to be missing in what you are asking is... this is the same file, on the same monitor, but with a different appearance in different software. It is not a question of whether the overall monitoring is GOOD, and it is not a matter of hardware settings (as that would most likely propogate across all software) it is that it is not CONSISTENT side by side on the very same monitor.
I had very similar issues that really seemed to get worse when we got new monitors, which is what lead me to chime in here. The monitors were also wide gamut displays.
The problem is likely this...
1. The difference being shown are the difference between software that properly color manages (i.e. Premier or After Effects) and software that does not (i.e. Quicktime or some web browsers)
2. The reason it is so severe is that the wide gamut monitors are able to show many more colors and thus the difference between the managed and unmanaged software is much more exagerrated than on regular gamut monitors.
I found this great link that helped calm my nerves and helped me get handle on much of what is going on.
http://www.artstorm.net/journal/2009/07/color-management-wide-gamut-dell-2408/
Now that is not to say that the 0-255/16-235 issue is not also involved here. It is definitely possible that a specific codec or compressor is part of the problem, but it sounds like it starts with the color management issue first.
I hope this helps.
Andy

Changing default color scheme when exporting ALV report to Excel spreadshee

Hi all,
We have a bunch of FI reports created using OOPS in abap. Each of the reports has the functionality to be exported to an excel spreadsheet. When exporting to Excel, the headers are a very dark brown color, making them difficult to read and it has been requested that they are shaded a lighter color. I have not defined any sort of color scheme within the report itself, and I was wondering if there was a way to change the color scheme when exporting the report to excel. Let me know if there is anything that can be done, thanks!

check ur fcat

Color shift when uploading

I have been trolling other sites to learn what might cause this.
I recently got a Huey device to callibrate my monitor. (I send out digital images of artwork and they need to be acurate color.)
After taking some images and loading them onto iPhoto, they seem to look very much like what I saw on the camera lcd screen. I can make subtle color and tone adjustments while capturing on the Panasonic Lumix camera. Usually, they are so close to what I want, all I do is crop in iPhoto.
But I am experiencing color shifts when I upload to make webpages so I can burn discs, or today when I uploaded to a local photo printer. They seem to move a bit towards more orange/pink tones, but when I drag them to the desk top, and open in Preview, they look identical to the iPhoto stored images.
I have read some ideas about RGB and there being bugs in iPhoto that alter your files even as you are loading them from the camera!
Does anyone know how I could fix this?
I can write scripts if it takes it. Thanks

Nanci
The pics look correct in iPhoto and Preview, right?
But not on the Web or at your local printer?
iPhoto and Preview are both Color Managed - that is (along with Safari) they read and respect the color profile of the pic.
Do the apps your Printer is using, or that you are using to view online, respect the color profile?
Regards
TD

How to fix color shift when converting ProPhoto rgb to srgb IE61966-2.1

How do I fix the color shift when converting my photos in photoshop to srgb for the web. I work in lightroom color space prophoto rgb and after editing in photoshop I convert it over but I get a shift in the colors. Thanks

are you working in 16-bit (ProPhotoRGB, you probably should be)
exactly how are you doing the Conversion
MAKE SURE YOU ARE NOT CONVERTING ANY ADJUSTMENT LAYERS (flatten or merge them before convert)
AND MAKE SURE YOU ARE VIEWING THE PROBLEM AREA AT 100% ACTUAL PIXELS when you do the convert

Color shift when using save for web

Hello,
I am converting my psd files to jpegs using "save for web". I am noticing that the colors are shifting from the original after saving for web. The color shift does not happen if I just convert the psd files to jpegs by using "save as". The psds have a profile of RGB1998. I am using CS3 and my monitor is color calibrated.
Do I need to convert the psd documents to sRGB first before I go to "save for web"?
The preview doesn't look any different if I check ICC profile in the save for web window. I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
Anyway I am wondering if I have to accept a color shift when saving for web or is there something I can do to get the saved for web jpegs to more closely match the original psd?
Thanks a lot for your help.

I think the reason why this question is asked often is because the FAQ entry is pretty lame and incomplete, especially for Mac users that by default have a color managed browser and by default have a screwed up rendering mechanism for untagged images.
Depending on your version of Photoshop, you can convert to sRGB before or during the Save for Web operation.
cesspool13 wrote:
...I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
You convert to sRGB for the systems that do not fully support color management.
and...
You include the sRGB ICC profile for the systems that do support color management.
Doing both covers your bum in most situations. You may choose to omit the ICC profile if you are working on common interface graphics that do not require strict color management. The ICC profile adds a few kilobytes to the file size that are not necessary on lesser graphic elements on a web page.

Color shift when printing

We have a Xerox workcenter 7655 at work and since I upgraded to Snow Leopard I get bad color shifts when printing. It's mostly too much magenta. I converted a cmyk file to a high quality pdf and the color was accurate when printing from a Windows machine but the light blue was badly shifted to lavender from my Mac. I tried different cmyk profiles when creating the pdf and printed the native file out of InDesign with the same results.
The print I get from the Windows machine has the same colors as what I see on my Mac's monitor. I do mostly web design now and have been out of the print end for some time. Until I moved to Snow Leopard, I didn't have this problem.
Can I get some ideas on how I can address this?
thanks

You answered your own question: CS5. There have been a slew of reports of workflows spun upside down when upgrading to CS5. It may require updating your system software and/or Adobe applications, along with any printer driver updates that may be lurking out there somewhere. The twist to your situation is ( and is very common ) that everything was working before and now it does not. Or there is a certain print disorder of some sort. Very troubling. I wish I had a smoking gun answer for you, but I don't. It sounds like you have a very viable workflow in place that worked before and damn well should perform for you now. I'd stick with what works and dump what doesn't ( if you can ).

Color shift when pasting from CMYK document to RGB document

Hello,
We're creating an image for a client that will eventually be printed 4c process, and we have to use some very specific CMYK values. However, since we need to use certain layer effects, we need to work in RGB. I assumed that since the CMYK values we use are within the RGB gamut, there would be no color shift when copying from a CMYK doc and pasting into an RGB doc, but I'm apprently mistaken.
I'm not very familiar with color management, since we don't do any heavy duty color work in house, so this is likely a very rudimentary question: how do I keep colors from shifting when pasting from a CMYK document into an RGB document (which will eventually be converted back to CMYK for print)?
Any help is greatly appreciated. Thanks.

x
x
x
you have two possible issues at work that would explain a change
"out of gamut" color between color modes (the RGB colors don't translate well to CMYK)
you are discarding profile information information when pasting (and not Converting to the destination)...

Color shift when converting .mov file exported from Macromedia Flash

I'm trying to convert quicktime file exported from Flash into any other format using Quicktime Pro 7.0.4 and I get substantial color shift. Here's the picture:
http://img525.imageshack.us/img525/1518/screen3ov.jpg
On the the left is the initial file, and on the right is what I get. I've tried all codecs setting (targa, jpeg2000, animation) but no luck. Please help!

I am in the midst of trying to figure out the opposite : Flash to After Effects. I am betting that this is an issue of 'color profile' attached to the images and the gamma settings in that profile. RGBA is only part of the story - color profile is all the rest of it. Eye Dropper doesn't tell you the color profile attached to the image.

Color space when exporting from RAW

Hello,
I am a new user of Lightroom and I find color spaces topic a bit confusing so far. My main question is: when exporting a photo, does Lightroom convert to a profile or assign a profile? Because there is no way to choose. I tried to export a photo with 3 different color spaces (sRGB, AdobeRGB and ICC profile from laboratory where I print my photos). After exporting them to JPEG it turned out that all of them look differently on my monitor - does it mean that Lightroom assigns a profile? If it was converting, shouldn't they have the same colours? What is more, after printing them in laboratory, results were completely different than I expected - the photo which had closest colours to what I saw in Lightroom was that in sRGB, but that with ICC of Lab was very different (much colder colours).
Where is the problem, or what aspect do I seem to misunderstand? Do I have wrong settings, should I use DNG to work with photos, should I export to TIFF, or I just have too weak monitor or wrongly calibrated one? Should I calibrate when viewing a picture in Lightroom or with the use of a photo exported to the ICC profile of Lab?
I would like to have a little bit of control over what I'm working on, depending on whether I want to publish it on a website or print. I know that my monitor can be a problem (I have an iiyama with IPS), but surely there has to be any way to make results of my work a bit closer to my expectations.
Just for information, my workflow doesn't require Photoshop, as I rather prefer to use only tools from Lightroom. I hope that my problem doesn't require the use of Photoshop.
I will be really greateful for your help - the general knowledge about colour spaces seems to be unsufficient when it comes to the usage of applications such as Lightroom.
Many thanks,
Marcin

Marcin S wrote:
Thank you for you helpful replies. Now I know a little bit more about it. But still, this is not completely clear to me.
My main question is: when exporting a photo, does Lightroom convert to a profile or assign a profile?
Both.
What you mean by both? How should I interpret it? I cannot choose "convert" or "assign", so how they both work together? What does it mean for me wanting to process photo and print in Lab?
I can only add, that those 3 photos which I exported to JPEG with 3 different colour spaces, they look different when viewing outside of Lightroom, ie. IrfanView. But when importing those JPEGs into Lightroom, differences are extremly slight. Is that because Lightroom operates in ProPhoto, which covers all colour spaces which I used, and other programs work in sRGB and those photos differently?
And the last question for now: will the hardware calibrator help in monitor which is, let's say, medium cost and medium quality? I mainly use it for preparing photos to put them on the website gallery, but would be nice if I could print better ones with a bit of certainty about what I will get from Lab.
Many thanks!!
Marcin
When you export a photo from LR, it converts to the colour space you select (e.g. sRGB) and embeds the appropriate profile in the exported file.
If your monitor were calibrated and profiled, and you view with a colour-managed viewer then images should look pretty much identical no matter which colour space you export in. (W7 Photo viewer is colour managed, the XP equivalent isn't, Mac s/w generally is. IE and Chrome aren't properly colour managed, Firefox is for all images, Safari is for images with embedded profiles. Other viewers vary.) With colour-managed viewers, the only difference should be with very highly saturated colours outside sRGB colour space (and then only if your monitor can display those colours).
LR is colour managed. If the monitor isn't calibrated/profiled then I think LR assumes the monitor has a colour space equivalent to sRGB (which is generally roughly right but won't be accurate). Internally LR uses ProPhoto RGB colour space in develop module, but uses Adobe RGB in Library, and previews are stored in Adobe RGB. However, the colour space LR uses won't explain why other viewers show things differently. It's simply that LR is colour managed (which means it converts to/from the image colour space), and I guess the other viewers you're using aren't; they just throw RGB data at the screen without converting.
Is it worth calibrating and profiling your monitor? Quite possibly. Does the colour and brightness vary with viewing angle as you move your head from side to side? If so, it may be TN technology, and perhaps not worth profiling. If it looks reasonably stable with different viewing angle then probably yes.

[FIX] Darker prints and color shifts when printing from Lightroom 2

Hi,
The problem :
When printing RAW or TIFF files from LR2, you get a printer output that
is much darker than it should be and that presents various color shifts.
I'm using an Epson Stylus Pro 3800 with the latest Windows driver
(6.50 - which is rather old by the way). The workaround described below
works for me under Windows XP SP3. It should also probably work with
other systems/printers/drivers. Use at your own (minor) risk.
The "official" procedure for printing from LR is as follows:
1. Do not let the printer manage colors and select "Other..." from the
profile dropdown list and select the ICC/ICM paper/printer profile that
you want to use.
2. Click on Print... in LR which opens the Print Settings dialog.
3. Select the options you need and the paper you're using.
4. **Disable the color management from the driver's side** (in Epson's
drivers, "Mode | Custom | No Color Adjustments").
5. Print
Unfortunately, **this doesn't work** for many of us and this produces a
print that is dark and has color shifts as mentioned above. Note that
the same image prints correctly from QImage or Photoshop CS3 (that is,
the printer output corresponds to what you see on your calibrated
display).
Apparently, although color management has been (allegedly) disabled in
the driver, there's something wrong between LR and the driver which
makes that *both* LR and the driver are still trying to manage colors.
In other words, the "No Color Adjustements" option of the driver doesn't
seem to work with LR.
The workaround (found after hours of hair pulling and paper and
expensive ink wasting):
In step #4,
1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
ICM
2. Click Advanced...
3. Check "Show all profiles".
4. Select Driver ICM (Advanced)"
5. Set **both** the "Input profile" and the "Printer profile" fields to
the very same profile that you specified in LR.
That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
then also select Pro38 PGPP in both "Input Profile" and "Printer
Profile". This has actually the same effect has disabling color
management in the driver (what "No Color Adjustements" should normally
take care of).
That's it. When printing, you'll get exactly the same color results as
when printing from QImage or Photoshop. No more dark prints. No more
color shifts.
One might think that the bug is in the Epson driver but in that case,
QImage would have the very same problem. So I tend to think that the bug
is on the Lightroom side.
Note: Although Photoshop CS3 produces a correct printer output, it
demonstrates the same problem as LR when using the "Match Print Color"
option for soft proofing. But in that case, only the preview colors are
wrong. The printer output is ok. Which also tends to demonstrate that
Adobe has the problem, not Epson. Or maybe both... :-) .
Don't ask me why some users have the problem and other don't.
Hope this helps.
Patrick Philippot
MainSoft Consulting Services
www.mainsoft.fr

A sincere thank you for your reply, Michael. Sorry about the "it just doesn't make sense" shortcut. I have been trying to solve this issue since LR 1.1, spending dozens of hours on different trials and digesting everything written on this forum and the B9180 forum about color management and double profiling. My shortcut was a summation of my experience (and my frustration) but doesn't really advance the conversation. Here are some data that should be more useful in diagnosing the problem.
I am running Windows XP SP2. I calibrate my monitor monthly with the Spyder. The reason I suspect this may be an issue of double profiling is because the results (moderately strong magenta overlay plus an increase in contrast) match what more knowledgeable people than I on this forum describe when double profiling occurs. Perhaps I shouldn't presume it is double profiling, and follow Patrick Philippot's lead in naming the problem "color shifts." Patrick does refer in post #2 of this thread, however, to obvious double profiling.
I certainly do have a successful and consistent print method. With PS CS3, and either my Epson 1280 or my HP B9180, the output is almost always dead on. Here is how I do it. In PS from the print dialog box, under color handling I always choose "Photoshop manages colors." Then under printer profile I select the profile designated by the manufacturer for a particular paper/printer combination. Then in the printer driver I disable printer control of color. With the Epson I check the box "Off (No Color Adjustment)." With the B9180 I choose the option "Application Managed Colors." While I sometimes may tweak the final output, these procedures have served me well with PS for several years.
Contrasted with my positive PS experience, my experience with LR printing has been inconsistent. I regret having to be so imprecise but truly sometimes LR produces accurate results that match the calibrated monitor, but most of the time it does not. I use standard procedures with LR that parallel the PS ones described above. In LR's printing panel, under color management, I specify the correct profile, just as I did for PS. Then in the printer driver I use the same procedures I use with PS. Most of the time the prints have the magenta overlay and too much contrast.
BTW, the inconsistent LR printing only takes place with my HP B9180. I have never had any problem with off-color LR prints with my Epson 1280. Again, I emphasize that I have standard procedures that always work with PS (no matter which printer) and LR (but only with the Epson).
Unfortunately the LR printing problems are intermittent. Some of the time (perhaps 20%) LR produces fine prints in the B9180, indistinguishable from PS prints. When LR is printing well, it will continue to print fine until "something happens" and the output shows the color shift. This means I do not get a random sequence of good-bad-good-bad prints, but rather good-good-x factor-bad-bad-bad. Ths problem is that I do not know what this "x factor" is. Once, when LR was giving me accurate output, I simply changed the default printer (Control Panel-Printers and Faxes) from the B9180 to my Samsung 1430 laser; immediately afterwards the LR output colors shifted. Did LR react to this change in default printers? Another time I had good LR printing success with version 1.2 but ran into the problems described above when I upgraded to version 1.3.
Sorry for the long post. I am hoping that someone will see something that I am missing and provide a hint. I think, though, that Patrick is correct when he states, "I tend to think that the problem is with LR. After all, similar issues (obvious double profiling) are observed only in LR but with various printers."

Color shift when exporting to tiff

Similar Messages

Maybe you are looking for