Color shift when printing with LR 3.6

LR 3.6, win 7, screen Nec PA 241 W, Epson R 3000. When printing with colors managed by LR and paper/R 3000 profiles, I get prints with a strong color shift (printer pilot "mode" : desactivated) . How can I correct it ?

You answered your own question: CS5.  There have been a slew of reports of workflows spun upside down when upgrading to CS5.  It may require updating your system software and/or Adobe applications, along with any printer driver updates that may be lurking out there somewhere.  The twist to your situation is ( and is very common ) that everything was working before and now it does not.  Or there is a certain print disorder of some sort.  Very troubling.  I wish I had a smoking gun answer for you, but I don't.  It sounds like you have a very viable workflow in place that worked before and damn well should perform for you now.  I'd stick with what works and dump what doesn't ( if you can ).

Similar Messages

  • Color shift when printing

    We have a Xerox workcenter 7655 at work and since I upgraded to Snow Leopard I get bad color shifts when printing. It's mostly too much magenta. I converted a cmyk file to a high quality pdf and the color was accurate when printing from a Windows machine but the light blue was badly shifted to lavender from my Mac. I tried different cmyk profiles when creating the pdf and printed the native file out of InDesign with the same results.
    The print I get from the Windows machine has the same colors as what I see on my Mac's monitor. I do mostly web design now and have been out of the print end for some time. Until I moved to Snow Leopard, I didn't have this problem.
    Can I get some ideas on how I can address this?
    thanks

    You answered your own question: CS5.  There have been a slew of reports of workflows spun upside down when upgrading to CS5.  It may require updating your system software and/or Adobe applications, along with any printer driver updates that may be lurking out there somewhere.  The twist to your situation is ( and is very common ) that everything was working before and now it does not.  Or there is a certain print disorder of some sort.  Very troubling.  I wish I had a smoking gun answer for you, but I don't.  It sounds like you have a very viable workflow in place that worked before and damn well should perform for you now.  I'd stick with what works and dump what doesn't ( if you can ).

  • [FIX] Darker prints and color shifts when printing from Lightroom 2

    Hi,
    The problem :
    When printing RAW or TIFF files from LR2, you get a printer output that
    is much darker than it should be and that presents various color shifts.
    I'm using an Epson Stylus Pro 3800 with the latest Windows driver
    (6.50 - which is rather old by the way). The workaround described below
    works for me under Windows XP SP3. It should also probably work with
    other systems/printers/drivers. Use at your own (minor) risk.
    The "official" procedure for printing from LR is as follows:
    1. Do not let the printer manage colors and select "Other..." from the
    profile dropdown list and select the ICC/ICM paper/printer profile that
    you want to use.
    2. Click on Print... in LR which opens the Print Settings dialog.
    3. Select the options you need and the paper you're using.
    4. **Disable the color management from the driver's side** (in Epson's
    drivers, "Mode | Custom | No Color Adjustments").
    5. Print
    Unfortunately, **this doesn't work** for many of us and this produces a
    print that is dark and has color shifts as mentioned above. Note that
    the same image prints correctly from QImage or Photoshop CS3 (that is,
    the printer output corresponds to what you see on your calibrated
    display).
    Apparently, although color management has been (allegedly) disabled in
    the driver, there's something wrong between LR and the driver which
    makes that *both* LR and the driver are still trying to manage colors.
    In other words, the "No Color Adjustements" option of the driver doesn't
    seem to work with LR.
    The workaround (found after hours of hair pulling and paper and
    expensive ink wasting):
    In step #4,
    1. Instead of selecting "No Color Adjustments", set Mode to "Custom |
    ICM
    2. Click Advanced...
    3. Check "Show all profiles".
    4. Select Driver ICM (Advanced)"
    5. Set **both** the "Input profile" and the "Printer profile" fields to
    the very same profile that you specified in LR.
    That is, if you specified Pro38 PGPP (Premium Glossy Photo Paper) in LR,
    then also select Pro38 PGPP in both "Input Profile" and "Printer
    Profile". This has actually the same effect has disabling color
    management in the driver (what "No Color Adjustements" should normally
    take care of).
    That's it. When printing, you'll get exactly the same color results as
    when printing from QImage or Photoshop. No more dark prints. No more
    color shifts.
    One might think that the bug is in the Epson driver but in that case,
    QImage would have the very same problem. So I tend to think that the bug
    is on the Lightroom side.
    Note: Although Photoshop CS3 produces a correct printer output, it
    demonstrates the same problem as LR when using the "Match Print Color"
    option for soft proofing. But in that case, only the preview colors are
    wrong. The printer output is ok. Which also tends to demonstrate that
    Adobe has the problem, not Epson. Or maybe both... :-) .
    Don't ask me why some users have the problem and other don't.
    Hope this helps.
    Patrick Philippot
    MainSoft Consulting Services
    www.mainsoft.fr

    A sincere thank you for your reply, Michael. Sorry about the "it just doesn't make sense" shortcut. I have been trying to solve this issue since LR 1.1, spending dozens of hours on different trials and digesting everything written on this forum and the B9180 forum about color management and double profiling. My shortcut was a summation of my experience (and my frustration) but doesn't really advance the conversation. Here are some data that should be more useful in diagnosing the problem.
    I am running Windows XP SP2. I calibrate my monitor monthly with the Spyder. The reason I suspect this may be an issue of double profiling is because the results (moderately strong magenta overlay plus an increase in contrast) match what more knowledgeable people than I on this forum describe when double profiling occurs. Perhaps I shouldn't presume it is double profiling, and follow Patrick Philippot's lead in naming the problem "color shifts." Patrick does refer in post #2 of this thread, however, to obvious double profiling.
    I certainly do have a successful and consistent print method. With PS CS3, and either my Epson 1280 or my HP B9180, the output is almost always dead on. Here is how I do it. In PS from the print dialog box, under color handling I always choose "Photoshop manages colors." Then under printer profile I select the profile designated by the manufacturer for a particular paper/printer combination. Then in the printer driver I disable printer control of color. With the Epson I check the box "Off (No Color Adjustment)." With the B9180 I choose the option "Application Managed Colors." While I sometimes may tweak the final output, these procedures have served me well with PS for several years.
    Contrasted with my positive PS experience, my experience with LR printing has been inconsistent. I regret having to be so imprecise but truly sometimes LR produces accurate results that match the calibrated monitor, but most of the time it does not. I use standard procedures with LR that parallel the PS ones described above. In LR's printing panel, under color management, I specify the correct profile, just as I did for PS. Then in the printer driver I use the same procedures I use with PS. Most of the time the prints have the magenta overlay and too much contrast.
    BTW, the inconsistent LR printing only takes place with my HP B9180. I have never had any problem with off-color LR prints with my Epson 1280. Again, I emphasize that I have standard procedures that always work with PS (no matter which printer) and LR (but only with the Epson).
    Unfortunately the LR printing problems are intermittent. Some of the time (perhaps 20%) LR produces fine prints in the B9180, indistinguishable from PS prints. When LR is printing well, it will continue to print fine until "something happens" and the output shows the color shift. This means I do not get a random sequence of good-bad-good-bad prints, but rather good-good-x factor-bad-bad-bad. Ths problem is that I do not know what this "x factor" is. Once, when LR was giving me accurate output, I simply changed the default printer (Control Panel-Printers and Faxes) from the B9180 to my Samsung 1430 laser; immediately afterwards the LR output colors shifted. Did LR react to this change in default printers? Another time I had good LR printing success with version 1.2 but ran into the problems described above when I upgraded to version 1.3.
    Sorry for the long post. I am hoping that someone will see something that I am missing and provide a hint. I think, though, that Patrick is correct when he states, "I tend to think that the problem is with LR. After all, similar issues (obvious double profiling) are observed only in LR but with various printers."

  • Color shift when filling with pattern

    Hello!
    I use the 'define pattern' and 'fill with pattern' feature in photoshop all the time to prepare graphics for print / production in my business. However, I have noticed a small but problematic color shift going from the main image (defined pattern) to the page (filled with pattern). You can see it in the image included here. The main image is vibrant, and lighter and the page behind it is dull and darker. It will print this way too. The main image prints great, and gets approved. But the page layout doesn't match. Both documents are set to sRGB color space when I check the Edit -> Color Settings option. Any ideas how to correct this?  Thanks!!

    Hello, in your screenshot, the first tab in the background has no profile that's what (#) means in the title of the tab, untitled one and two have the same profile as the working space (which tab is visible?), while the one in the foreground as a different profile than the working space that's what (*) means in the title bar.
    So, that tells me they do not have the same profile.
    Also, is there noise or very small textures in the circles? You might want to look at them all with the same magnification.
    Finally, a smart object can be of a different color space than the document that holds it.

  • Red Color Cast when printing with Canon Pixma Pro 9000

    My printer is giving me a horrible red color cast after the latest software update. The color cast can also be seen in Preview and in the print window. No changes to drivers have been made. Printer worked fine before the update.
    Has anyone else found this problem and offered a solution?

    You may find it helpful.
    Thanks, but if you look in the archives of the Apple ColorSync Users List, you'll find thousands of posts from his Mac dating back to the beginning of the List.
    The principle is that you configure your device colour spaces to the largest gamut of which they are capable, calibrate them to a stable condition, characterise that condition in a measured test chart, and build ICC device profiles for those characterisations in your ICC profiling package of choice.
    You then capture and correct colour with correct colour previews, resulting in normalised exposures in an ideal CIE colour space. With you normalised exposures, you convert into output condition 1, output condition 2, output condition n which is what repurposing is about.
    But you do no apply a gamma change on top of the colour managed rendering. That is incorrect by definition. You apply your gamma change as part of the colour correction in order to get your normalised exposure.
    If you imagine this in a prepress process, then you can forget the concept of determinate rendering which is the bedrock of the ICC architecture. If you as photographer do a gamma correction on top of your presentation print or proof print, then you can claim that you have a presentation print, but you cannot contractually claim that you have a proof print as your proof print is a colour correction on top of the colour management system. If Apple Aperture allows the user access to colour correction on top of colour management, then that is a bug in the application. Sorry ...
    /hh

  • Color conflict when printing text boxes layered with images

    Thank you in advance for any insight on this question. I've got a text box grouped with an image in a Pages document. The text box is layered in front of an object and is transparent (no fill color in the text box). The object however, is filled with a color. When printing the document, the image comes out in two shades of blue even though the text box is transparent. Thoughts?

    Want to add that if you uncheck the Retain Slide Quality Settings, you'll have to keep the High setting.
    Another way to change slide quality is before publishing, and in that case I prefer Optimized to High (which is not possible when overriding the Slide Quality on publishing, there you only have the choice between Low and High).
    Still I'm puzzled because the simple TEB normally do not cause that kind of quality issue, have seen it happening with shapes (because they have transparent pixels) and images, but with TEB's? Wondering
    Lilybiri

  • Color shift when uploading

    I have been trolling other sites to learn what might cause this.
    I recently got a Huey device to callibrate my monitor. (I send out digital images of artwork and they need to be acurate color.)
    After taking some images and loading them onto iPhoto, they seem to look very much like what I saw on the camera lcd screen. I can make subtle color and tone adjustments while capturing on the Panasonic Lumix camera. Usually, they are so close to what I want, all I do is crop in iPhoto.
    But I am experiencing color shifts when I upload to make webpages so I can burn discs, or today when I uploaded to a local photo printer. They seem to move a bit towards more orange/pink tones, but when I drag them to the desk top, and open in Preview, they look identical to the iPhoto stored images.
    I have read some ideas about RGB and there being bugs in iPhoto that alter your files even as you are loading them from the camera!
    Does anyone know how I could fix this?
    I can write scripts if it takes it. Thanks

    Nanci
    The pics look correct in iPhoto and Preview, right?
    But not on the Web or at your local printer?
    iPhoto and Preview are both Color Managed - that is (along with Safari) they read and respect the color profile of the pic.
    Do the apps your Printer is using, or that you are using to view online, respect the color profile?
    Regards
    TD

  • Color shift when pasting from CMYK document to RGB document

    Hello,
    We're creating an image for a client that will eventually be printed 4c process, and we have to use some very specific CMYK values. However, since we need to use certain layer effects, we need to work in RGB. I assumed that since the CMYK values we use are within the RGB gamut, there would be no color shift when copying from a CMYK doc and pasting into an RGB doc, but I'm apprently mistaken.
    I'm not very familiar with color management, since we don't do any heavy duty color work in house, so this is likely a very rudimentary question: how do I keep colors from shifting when pasting from a CMYK document into an RGB document (which will eventually be converted back to CMYK for print)?
    Any help is greatly appreciated. Thanks.

    x
    x
    x
    you have two possible issues at work that would explain a change
    "out of gamut" color between color modes (the RGB colors don't translate well to CMYK)
    you are discarding profile information information when pasting (and not Converting to the destination)...

  • Black ink faded/Gray when printing with HP Envy 5530

    When printing with my new HP Envy 5530 the black ink looks gray or faded.  I tested the color and this prints dark and clear.  I have power cycled, plugged into different power outlets and re-inserted the cartridge.  Any thoughts...or could it just be a "bum" cartridge?
    Thanks in Advance for your help...

    Howdy. After tinkering around with my Envy having the same issue, I found out that after replacing my black cartridge because it was low, I was having the same issue.
    Turns out the color cartridge will simulate a black in an to preserve both the tri color cartridge and the black cartridge for as long as possible, which is why even if you've never printed any color, both your cartridges should be low. Once the color cartridge starts getting low, the printer doesn't have a sensor to realize which of the tri color is mixing in the most, so it continues to mix it in either way.
    I was having this issue where I would print one page and it would be okay and then any page following would slowly look worse.
    Long story short, just print without the color cartridge in and you shouldn't have the issue unless your black is really low. Replacing that should fix it overall though.

  • AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

    Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
    Works fine printing from any other application.

    I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

  • How to fix color shift when converting ProPhoto rgb to srgb IE61966-2.1

    How do I fix the color shift when converting my photos in photoshop to srgb for the web. I work in lightroom color space prophoto rgb and after editing in photoshop I convert it over but I get a shift in the colors. Thanks

    are you working in 16-bit (ProPhotoRGB, you probably should be)
    exactly how are you doing the Conversion
    MAKE SURE YOU ARE NOT CONVERTING ANY ADJUSTMENT LAYERS (flatten or merge them before convert)
    AND MAKE SURE YOU ARE VIEWING THE PROBLEM AREA AT 100% ACTUAL PIXELS when you do the convert

  • Color shift when using save for web

    Hello,
    I am converting my psd files to jpegs using "save for web".  I am noticing that the colors are shifting from the original after saving for web. The color shift  does not happen if I just convert the psd files to jpegs by using "save as". The psds have a profile of RGB1998. I am using CS3 and my monitor is color calibrated.
    Do I need to convert the psd documents to sRGB first before I go to "save for web"?
    The preview doesn't look any different if  I check ICC profile in the save for web window. I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
    Anyway I am  wondering if I have to accept a color shift when saving for web or is there something I can do to get the saved for web jpegs to more closely match the original psd?
    Thanks a lot for your help.

    I think the reason why this question is asked often is because the FAQ entry is pretty lame and incomplete, especially for Mac users that by default have a color managed browser and by default have a screwed up rendering mechanism for untagged images.
    Depending on your version of Photoshop, you can convert to sRGB before or during the Save for Web operation.
    cesspool13 wrote:
     ...I have been told that you are not supposed to embed the ICC profile in the document when saving for web because most monitors are untagged.
    You convert to sRGB for the systems that do not fully support color management.
    and...
    You include the sRGB ICC profile for the systems that do support color management.
    Doing both covers your bum in most situations. You may choose to omit the ICC profile if you are working on common interface graphics that do not require strict color management. The ICC profile adds a few kilobytes to the file size that are not necessary on lesser graphic elements on a web page.

  • Problem with margins shifting when printing.

    I have an installation template on an 11x17 sheet with 3/8” margins. There is a “left” and “right” version on each side (basically mirrored) and the intent is that they align front to back when you hold the sheet up to the light. When we print a proof, two sided, on our laser printer, the drawings match when the single sheet is held up to the light, but the margins are no longer the same; each is offset by a 1/16” in the same direction. BUT when you print one sided on our printer and hold the 2 sheets back to back, the drawings are off by 1/8” because the margins are off by the 1/16' in different directions. This creates a problem when it is sent to the commercial printers as they are printing single sided to their printing plates. (The problem still appears in the exported PDF file the printers use)
    The problem is, I can’t get InDesign to stop shifting the content on the page that 1/16”!
    If I look at the page, the margin guides show the correct 3/8”on both sides.
    If I look at the Master page, the margin guides show the correct 3/8”on both sides.
    Under “Margins and Columns” in InDesign, I found the correct margins set (0.375 - 3/8”) all around,  with 1 column and a 0.1667” Gutter. Ha .. I thought I had found it! So I removed the Gutter and checked “Enabled Layout”, But when printed, same problem.
    I then though it must be on the master pages and found and did the same thing as above, still no luck!
    Then I created a new master page and set it up as above and reapplied the new master page, still no luck!
    I’m stumped!?! If we can’t get these margins correct we can’t send it to the commercial printer.
    Thanks in advance for any help!

    Well I don't know for a fact that it is, but the customer is a major International Fortune 500 Company and this is an Installation sheet printed and included in one of their product packages, so I would imagine it is an offset press.
    Besides, if the commercial printer was using a commercial Laser printer, can't they print 2-sided? There is no problem when it is printed 2-sided, the images align because both margins are offset in the same direction. It is only when it is printed 1-sided (one side to each printing plate) that the problem becomes obvious because the offsets are in the opposite directions. (BTW, it is B&W)

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Color cast when printing from Lightroom with Epson 3880 printer

    Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast.
    WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync.
    I used to have an espon 2400 which worked just fine.
    I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
    I need help!

    Are you using moab icc profiles or are you using one of the epson profiles?
    I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
    At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
    Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
    Hope so
    Tom

Maybe you are looking for