Color streaking on screen

Colors streaked on screen. Does this static mean the iPad is ruined?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost.

Similar Messages

My phone is unresponsive, like a black screen, except bright colors streak the screen. I tried plugging it into the computer but it says its an unknown device. What happened?

I recently plugged in my phone to the computer to download some music. It was resyncing and copying an app, while simultaneously I was on snapchat when suddenly a big wave of pink covered the bottom of the screen, then streaks of bright colors covered the whole screen. I cant turn it off because I use assistive touch, which is now covered by the streaks. Right now I'm waiting for my phone to turn off by itself, hopefully, because it was low battery when I plugged it in. Not only that, but when I plug it into the computer it says the device and port are 'unknown'. What happened? Is my phone broken? Please help me.

See if you can connect in recovery mode and restore your device, explained in this article:
iOS: Unable to update or restore
If you can't, you should get it serviced.
Apple - Support - Service Answer Center

Why does my ipod 5 have color streaks?

i had my ipod plugged in charging next to me and when i went to use it i noticed color streaks coming from the bottom of the screen. it sort of looks as if the bottom row of icons is radiating light upwards. i havent gotten it wet or anything so i was wondering why its doing this.

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

How to change the background color of a screen field

Hi All,
I have created a screen, in the output, the fields in the screen are having same color with the screen.
My client want the fields to be in the gray color.
For more clarification,
Goto SE11, Enter any table name, Click on display
In the next screen, observe the fields
Name, Short text, Last changed, Status are in the same color with the screen. Where as their values...
MARA, Material Master: General Data, etc are in the screen with gray background, I want in that way.
Any hint...
Thanks,
Kal Chand

hi
As i understand, in your scree u have taken "pushbutton" instead of taking "I/O field"
So make ur fields to "I/O fields"
Reward if it is helpful.
Thanks
Siva Kumar

HP LaserJet Pro 400 color M451dn Printing Color Streaks: HELP!

We recently replaced the ink cartridges in our printer, but now, it's printing color streaks on our paper. The weird thing is, it only does this for 4 pages every 4 pages. 4 pages will be okay, then we'll get cyan, magenta, yellow, and black horizontal stripes on the next 4 pages. We think it's because we replaced the Laserjet cartridges with a generic toner. Is there any way to fix this???

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to change the color of SAP screen?

Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN Consultant

We had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com

Can i have the HTMLB Code for the background color for a screen?

Hi friends,
Can i have the HTMLB Code for the background color for a screen?
moosa

Hi:
you can put like
<table width="100%" height="100%" cellspacing="1" cellpadding="2" border="0">
<tr class="sapTbvCellStd"> <td bgcolor="#B1E1D2" valign="top">
Regards
Shashi

Colors changes on screen

OK guys I have a question? I just started to notice that I every time I press the menu key or even the a green phone key there are waves of color on the screen. Its almost like putting your finger on a plasma screen and watching the colors change.
but it only wants to do it when on certain times, not all the time!
what can I do to prevent from a major problem?

sounds like it could be a display issue
try removing the battery with power on and then replace... wait for reboot
>>>>>>>>>>>>>>>>>>>>>>>>~
Hope I was able to help
If you have received information that has helped you out, please give them Kudos.
If your problem has been solved, please click on the post that resolved the issue

With new Mac OS 10.9 cannot print photos the same colors as my screen in PS6 what can I do

PS^ how to get PS^ to print photos the same colors as the screen on my mac.

< Moving the thread to Photoshop Forums>

Numbers of colors on the screen? Zen vs. Vision

Hi
I am thinking about getting either a Zen or Zen vision M player. I can see that the Zen has 6m colors on the screen and the Vision "only" has 262k colors can I see the difference?
thanks for your help?
Anders Lindhj

Well, the difference IS significant when viewing pictures, as well as videos. It's like setting your TV color setting to 30% (Zen V M) and then to 00% (Zen).
The ZEN is a huge improvement, as I have both the Zen and ZVM

I am trying to use Adobe Color and the screen won't load

I am trying to use Adobe Color and the screen won't load. All I get is the 4 spinning squares in the center of the screen. I Am using a Mac. Any help would be much appreciated.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.

Photoshop CS6 selection, shape, and text is causing colored artifacts on screen

The Photoshop CS6 (13.0.4) selection, text, and shape tool causes colored artifacts on screen. I'm running on a retina Macbook Pro updated to the latest ML release. I have disabled GPU acceleration. I have also tried starting Photoshop with no plugins but this does not help.
I have created a video which shows the phenomena
http://www.youtube.com/watch?v=VG5ayC3WmKA

SOLVED. After two days of intense debugging I've identified the issue as an interaction between the ICC color profile, integrated GPU, and Photoshop. The ICC profile was created with an i1Display Pro using the i1Profiler software. The issue occurs when you create the color profile using the LUT setting. Creating a profile using the matrix setting seems to be ok. In summary, these are the specific conditions that cause the issue (for me):
1) Using a color profile created with the LUT setting with i1Profiler and i1Display Pro
2) Using the integrated GPU (discrete GPU is disabled in Photoshop Performance setting)
3) Running on Photoshop 13.0.4 (13.0+ all have the issue) on a 15" Macbook Pro with Retina display
Creating a new profile with the matrix setting OR enabling the discrete Nvidia GPU will also make the artifacts go away. The integrated GPU using the LUT based color profile does not seem to have any artifacts in any other photography and video editing software that I've tried so Photoshop is playing a role. The nature of the artifacts also change from Photoshop version 13.0 to 13.0.4. For example, in Photoshop 13.0 the Marquee Tool has no issues while 13.0.1+ has artifacts.

RAW files look corrupted with color streaking during import

During import in Lightroom about 25% of my files look corrupted (with color streaks, etc.). The RAW images upload perfectly in iPhoto on the same computer but for some reason will become corrupted in Lightroom. I am able to delete the corrupted images in the LR Library and reload them with about a 50% success rate. I've tried different memory cards, cf importers, etc. Only an issue in LR. Sometimes they export with the streaking and other times they export perfectly fine. Even if they export fine it makes it impossible to edit in LR. Below is an example of how the image appears. Any answers?

Raw files have a camera-embedded JPG.
I would guess the files are corrupt, LR is showing you this corruption, while other programs are only interpreting the JPG and hiding the corruption.
Can you upload one of these photos that iPhoto shows as ok, while LR shows corruption? Upload one to www.dropbox.com <http://www.dropbox.com> and post a public download link, here.

I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

I was in the middle of using my iPhone 4 running on the latest iOS before iOS 6 and the screen went black but you can see it is still on because the color of the screen is blueish blackish like when your phone is turning off. Any suggestions?

Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.

Grey color cover the screen and can't use touch screen when trying to open the internet.

Pleas help, yesterday when I tried to open an website on my I pad 2 and there was a grey color cover the screen and I can't use touch screen, i still can see the internet is working in the back ground of the screen and the webpage was opend but I just can't make the grey color screen disappear. Thanks million.

Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Last thing to try is quit the app and restart the iPad. Go to the home screen first by tapping the home button. Quit Safari by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Safari icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Color streaking on screen

Similar Messages

Maybe you are looking for