Color swatch strange behavior

Hi,
I'm working on a AE 5.5 project and try to use the color swatch panel to put in a color RGB R:5 , G: 16 , B: 103 to create a blue color.
But what ever I try at the bottom of the panel appears a different color in HEX DEC and that's the color that stay's as the swatch color.
Must be a small adjustment in the preferences probably, but how do I get this panel working as in all other Adobe programs?!
What do I do wrong?!
Thanks David

Thanks for that, but I don't think that's the problem.
Would it be possible that the color swatch panel has a different behavior when I work in 32 bits floatingpoint?!
Because I work on a project in 32 bits with 10bits footage.

Similar Messages

Strange color swatch behavior in InDesign CS4

I coedit a quarterly online newsletter using InDesign CS4 on my two Macs, a PowerBook and a Mac Book Pro. My coeditor uses InDesign CS4 on her PC.
Lately something strange has started happening. We use a standard text color for hyperlinks (R=60 G=77 B=157). Two weeks ago, every time I applied the color swatch to the text, it took on a "wooly," three-dimensional look. I was using my PowerBook and swapped over to my Mac Book Pro, and all was well.
In the next draft of the newsletter, on my Mac Book Pro I'm getting the same result as I did on my PowerBook. I've attached the draft in PDF format so you can see what I'm talking about; the effect is on page ten.
I've tried fiddling with both the Swatches and Character panels to get rid of this effect, but so far nothing is working.
Any suggestions?
Buzz Haughton

Hi Buzz,
Unfortunately, uploading PDFs or anything else takes a good measure of time to pass through -- long enough to post a follow-up with an inline image, with this icon in the toolbar at the top of the reply box:
Since you mention it's just the 'hyperlink' text, I don't think it's an unintentionally applied shadow effect, as that can't be done inline. And it's visible in the exported PDF as well, ruling out InDesign view quality settings.
Perhaps there is something near the text frame that forces the text to be rasterized. Can you check with a Select All?
I forgot: there's also a View Transparency Effects, or something to that effect. It's in the same panel as Separation Preview.

Illustrator CS6, CC, "CC 2014" not honoring a 100% Cyan Spot Color Swatch change.

Why does Illustrator CS6, CC, "CC 2014" not honor a "100% Cyan Spot Color Swatch" changing the % value in the Color Pallet.
I create 3 different Spot Color Swatches of 100% Cyan, 100% Magenta and 100% Yellow in the Swatch pallet.
Then I fill 3 different squares with one of each Swatch and put the Fill to 70% on all in the Color Pallet.
Now I try to change each square back to 100% value in the Color Pallet by typing a number into the Percent Field.
But the Cyan Spot Color does not honor the entry, the Yellow and Magenta are fine.
Has anyone seen this behavior before, and what can be done to resolve it?
Thanks,
J

I would report this as a bug, you can use the slider to set it to 100%, but not enter that value by typing. Strange.
Adobe - Feature Request/Bug Report Form

Strange behavior after using NIK plug-ins

Every once in a while I encounter this strange behavior of Aperture. I first process the NEF's in Aperture (white balance, Exposure, Enhance... and, when needed, Cropping) and then I fine tune the image with the NIK plug-ins; when needed DfIne 2.0, Viveza, Color Efex Pro 3.0 and Sharpener Pro 3.0 Output Sharpener.
If I look at the processed picture then, I get a perfect presentation of the photo;
!http://users.skynet.be/fc419085/Aperture-1.jpg!
But when I press Z to zoom into a 100% preview I get this;
!http://users.skynet.be/fc419085/Aperture-2.jpg!
When I select the Loup in the normal view mode I get this;
!http://users.skynet.be/fc419085/Aperture-3.jpg!
This doesn't happen with all my pictures, yesterday I processed a series of 8 pictures an 6 of them showed this behavior the other two acted normal and I can't see what I did differently whit these last two.
When I export the strangely behaving photo's to a Tiff or a Jpeg, I get perfectly normal pictures.
The original NEF behaves normal. I have seen this behavior with NEF's from a Nikon D200, D2x and a D300. I have Aperture 2.1.2 running on a 2.33 GHz Intel Core Duo MacBook Pro running Mac OS X 10.5.6
Does anybody know what's happening and if so, how to solve this problem?
Cheers,
Ivan

I did some testing and what I found is too weird to be true.
First this mashed up look doesn't only happen after using NIK plug-ins, it also happens when making a roundtrip to Photoshop, given that certain conditions are met.
Give it a try yourself. Crop an image to an uneven pixelcount dimension, for example 4227 x 2797 and make a roundtrip to Photoshop. Then have a 100% view look at the new image in Aperture. You'll have a mashed up view, at least I do.
Now crop the same original image to an even pixelcount dimension, for example 4228 x 2798 and make an roundtrip to Photoshop once more. When you have a 100% view of the new image now, you'll see a perfectly normal photo.
Do you think Aperture developers are reading this forum?

Strange Behavior in iMovie 08

I recently purchased a MacPro, installed Leopard and moved all my files, applications, and settings from my MacBook Pro notebook by way of a Time Machine backup. Everything went without a hitch except for iMovie 08. When I open it it appears to start up but the application window never opens and almost all the menu items are grayed out. I can quit the application and start it again, but still get the same strange behavior. I have repaired permissions, verified my disk, deleted preferences and reinstalled iLife, then updated in software update, all with no effect. However iMovie 08 runs just fine on my MacBook Pro which should be identical to my Mac Pro. What gives? Ironic since a primary reason for purchasing this computer was for its enhance performance capabilities

1) load and install the update for iM08, vers 7.1.
2) then, in System Preferences/Monitor/Color Profile choose 'any other' than the actual one (e.g. AdobeRGB).. launch iM08.. now, set the Color Profile to your wanted one..

Color conversion : special behavior with Spot Color "All"

Hello,
I have a document with printmarks which have a spot color "All". While I convert the page using the "Color conversion" to Gray 1.8 with Adobe Acrobat X the spot color "All" are still present (with the alternate color space DeviceGray).
Using Adobe Acrobat 9.x all objects have a DeviceGray color.
Is it a bug or a new behavior? Moreover the SDK method doesn't convert the spot color but keep the name (but I know this is not the right place to post it - it's just for information).
Regards,
Joe

I sense you may not understand the difference between sopt and process colors in the printing process.
When you use process inks you build all color representations by combining dots of varying sizes from each of the four process colors, cyan, magenta, yellow, and black. Because the dots are two small to be seen individually your brain is fooled into thinking it sees other colors. Process color printing requires four printing plates to produce the full range of colors possible, but that range is limited compared to what you can see in real life or capture in RGB.
Spot colors, in contrast, are similar to paint. Each color is mixed individually, and every spot color requires its own plate on the printing press (and you must use a press -- toner and inkjet printers use cmyk inksets and cannot print real spot colors). Because of the expense of these plates, the use of spot colors is usually limited to one or two colors in any print job, and if the job has other color (like photographs) that requires process inks, converting the spot colors to the closest process simulation is often employed if the spot colors can be simulated "close enough" to satisfy the client and the budget is tight.
I would avoid using process colors for type in small sizes or for very thin strokes, especially in lighter colors, as you are likely to see ragged edges.
So, how many spot color swatches did you use? More than two? More than four? Do you have a huge budget to produce the work? This may be a project that really should be designed from the ground up as process, or process and one spot for that hard to print bright accent color.

JDEV Team: Strange behavior in TOMCAT using DATATAGS (VERY CRITICAL)

I am encountering some strange behavior when I deploy my application to TOMCAT.
If I run in JDeveloper (webtogo) everything works fine but the behavior changes completely in TOMCAT.
Let me try and explain my situation here.
I have 3 jsps :
1.iss_listApps.jsp which is used to browse all the available records, allows the user to navigate to a specific record and edit or delete.
2. app_edit.jsp which is used to edit/delete a specific row passed from iss_listApps.jsp.
3. app_edit_post.jsp which is used to save the changes.
Note that I use an anchor ">Edit</a> to pass a row from the browser page to the edit page.
For your convenience I have listed all the source files below.
Now here are my problems:
Problem 1. If I run it in JDeveloper, I am able to browse the records and go to a specific record to edit and delete by clicking on the "Edit" anchor provided in the browser page.
I can also go to the edit page and backout out of it by not saving the changes. In that case I am back in my browser page and I can again click on the "Edit" anchor to a specific record.
However if I am in TOMCAT, I am able to browse and go to a specific record so long as I make changes to it and save it. If for any reason, I do not save a record and I go back to my browser
page then any subsequent calls to to edit a specific record goes to the same OLD RECORD that I did not save.
I fail to understand why? Maybe the "webtogo" server automatically refreshes when I click on the "back tab". If so, how do I automatically refresh a jsp page when I click on the "back tab" in TOMCAT.
I would sincerely appreciate any help on this.
Problem 2. I have an include jsp tag in my browser page. defined as
<jsp:include page="Message.jsp" flush="true">
<jsp:param name="colspan" value="2"/>
</jsp:include>.
This section of the code is currently commented out because if I uncomment it then it runs ok in JDeveloper but in Tomcat it causes the browser page to always navigate to the first record if I want to edit a specific record.
I would sincerely appreciate any answer on this.
Here are my source files:
1. iss_ListApps.jsp (browser page). Please see how the anchor is formed. It causes no problems
in JDeveloper.
<%@ page contentType="text/html;charset=WINDOWS-1252"%>
<HTML>
<base target="contentsframe">
<head>
</head>
<body>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<jbo:ApplicationModule id="NewBC4J.NewBC4JModule" configname="NewBC4J.NewBC4JModule.NewBC4JModuleLocal" username="issue" password="issue"/>
<jbo:RollBack appid="NewBC4J.NewBC4JModule" />
<jbo:DataSource id="app_vo" appid="NewBC4J.NewBC4JModule" viewobject="ApplicationsView" ></jbo:DataSource>
<jbo:RefreshDataSource datasource="app_vo" />
<table width="100%" bgcolor="tan" border="0" align="center" cellpadding="3" cellspacing="0">
<%--
<jsp:include page="Message.jsp" flush="true">
<jsp:param name="colspan" value="2"/>
</jsp:include> --%>
<form name="list" target="body" action="app_edit.jsp" method="post">
<tr><th colspan="4">List of Valid Applications</th></tr>
<tr>
<th> </th>
<th align="left"><u>Code</u></th>
<th align="left"><u>Name</u></th>
<th align="left"><u>Description</u></th>
</tr>
<tr>
<jbo:RowsetIterate datasource="app_vo">
<td>
<a href="app_edit.jsp?RowKeyValue=<jbo:ShowValue datasource="app_vo" dataitem="RowKey"/>">Edit</a>
</td>
<td>
<jbo:ShowValue datasource="app_vo" dataitem="Code" />
</td>
<td>
<jbo:ShowValue datasource="app_vo" dataitem="Name" />
</td>
<td>
<jbo:ShowValue datasource="app_vo" dataitem="A ppDesc" />
</td>
</tr>
</jbo:RowsetIterate>
</form>
</table>
<table width="100%" bgcolor="skyblue" align="center" cellpadding="10" cellspacing="0" >
<tr>
<form NAME="AddForm" action="app_add.jsp">
<td>
<input type = "submit" name="submit" value="Add" align="center" >
</td>
</form>
</tr>
</table>
</body>
<jbo:ReleasePageResources releasemode="Stateful" appid="NewBC4J.NewBC4JModule" />
</html>
2. Second Source File: app_edit.jsp (Allows editing of a record)
<%@ page contentType="text/html;charset=WINDOWS-1252"%>
<HTML>
<base target="contentsframe">
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=WINDOWS-1252">
<META NAME="GENERATOR" CONTENT="Oracle JDeveloper">
<TITLE>
</TITLE>
</HEAD>
<BODY>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<jbo:ApplicationModule id="NewBC4J.NewBC4JModule" configname="NewBC4J.NewBC4JModule.NewBC4JModuleLocal" />
<jbo:DataSource id="app_vo" appid="NewBC4J.NewBC4JModule" viewobject="ApplicationsView" />
<jbo:Row id="myrow" datasource="app_vo" rowkeyparam="RowKeyValue" action="Find">
<jbo:SetAttribute dataitem="*"/>
</jbo:Row>
<table width="100%" bgcolor="skyblue" border="0" align="center">
<tr>
<td>
<table width="100%" bgcolor="tan" border="0" align="center" cellpadding="3" cellspacing="0">
<form NAME="iForm" action="app_edit_post.jsp">
<tr>
<th colspan="2">
"Edit/Delete Applications"
</th>
</tr>
<jsp:include page="Message.jsp" flush="true">
<jsp:param name="colspan" value="2"/>
</jsp:include>
<tr>
<td align="right"><b><font color="red"> Name:</font></b></td>
<td> <jbo:InputText datasource="app_vo" dataitem="Name" cols="50" />
</td>
</tr>
<tr>
<td align="Right"><b><font color="red"> Description: </font></b></td>
<td> <jbo:InputTextArea datasource="app_vo" dataitem="AppDesc" cols="50" rows="5" />
</td>
</tr>
</table>

<table width="100%" bgcolor="skyblue" align="center" cellpadding="10" cellspacing="0" >
<tr>
<input name="RowKeyValue" type="hidden" value="<jbo:ShowValue datasource="app_vo" dataitem="RowKey"/>" />
<td>
<input type = "submit" name="submit" value="Save">
</td>
</form>
<form NAME="DelForm" action="app_del_post.jsp">
<input name="RowKeyVal" type="hidden" value="<jbo:ShowValue datasource="app_vo" dataitem="RowKey"/>" />
<td>
<input type = "submit" name="submit" value="Delete">
</td>
</form>
</tr>
</table>
</td>
</tr>
</table>
</BODY>
</HTML>
<jbo:ReleasePageResources releasemode="Stateful" />
3. Third source file app_edit_post.jsp (ALlows saving the changes made to a specific record)
<%@ page contentType="text/html;charset=ISO-8859-1"%>
<HTML>
<BODY>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<jbo:ApplicationModule id="NewBC4J.NewBC4JModule" configname="NewBC4J.NewBC4JModule.NewBC4JModuleLocal" />
<jbo:DataSource id="app_vo" appid="NewBC4J.NewBC4JModule" viewobject="ApplicationsView" ></jbo:DataSource>
<%
try
%>
<jbo:Row id="row3" datasource="app_vo" rowkeyparam="RowKeyValue" action="Update" >
<jbo:SetAttribute dataitem="*" />
</jbo:Row>
<jbo:Commit appid="NewBC4J.NewBC4JModule" />
<p><font face="Arial, Helvetica, sans-serif"><b><font color="006699">Application Successfully Updated</b></font></font> </p>
<%
catch(Exception exc)
out.println("<pre> ");
exc.printStackTrace(new java.io.PrintWriter(out));
out.println("</pre>");
%>
<br>
<br>
<form action="app_ListApps.jsp" method="post"><input type="submit" value="Click to Continue"></form
<jbo:ReleasePageResources releasemode="Stateful" />
</BODY>
</HTML>
null

I would not expect the 'back' button to automatically refresh the page. This button basically traverses the history of pages. Since Tomcat is caching your pages, you can try to control it's interaction with the browser by:
1. Adding cache control pragmas to the returned content so it doesn't get cached.(look at www.w3c.org at the HTTP spec)
2. dont rely on the back button, place a link on your pages to go back to the list page.
3. change your cache control settings in your browser to check for a new page every time a url is visited.

InDesign keeps freezing when updating a paragraph style, a color swatch or moving pages

I am experiencing a very serious blocking bug. Somehow, when I update certain text styles and click Preview or Update Style Definition, the program goes to 100% CPU (single thread) and never recovers. The same happens when moving certain spreads in the document or updating a color swatch. I suspect a bad font, but I can't change the fonts, because the program freezes when I redefine styles. When I change the color or font manually in the workspace of the document, everything works. Any ideas, Adobe?
I have tried deleting the SavedData and Preferences, it doesn't have an effect.
I am using InDesign CC 2014 on Windows 7. I have never experienced such behavior from InDesign before. (I've got a lot of experience with the program since Version CS1)

I've done what you said. All fonts used are deleted. The problem is persisting. The fonts are from good sources, so I wouldn't expect that. This is specific to InDesign CC2014.

Strange behavior switching from JSF to JSP2

I am learning JSF and was trying to implement a small exercise on EL (with JSF page and JSP2). i found a strange behavior and completely clueless of the reason behind it. Please find my code below and scenario
MY JSP file
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<f:view>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD><TITLE>Accessing Bean Properties</TITLE>
<LINK REL="STYLESHEET"
      HREF="./css/styles.css"
      TYPE="text/css">
</HEAD>
<BODY>
<TABLE BORDER=5 ALIGN="CENTER">
<TR><TH class="TITLE">Accessing Bean Properties: JSP2_1 result</TH></TR>
</TABLE>
<% System.out.println("Accessing Bean Properties: JSP2_1 result"); %>
<OL>
<LI>${favColors.col[0]}
<LI>${favColors.col[1]}
<LI>${favColors.col[2]}
<LI>${favColors.col[3]}
<LI>First Name ${favColors.firstName}
<LI>Second Name ${favColors.middleName}
<LI>ThirdName Name ${favColors.lastName}
</OL>
<BR><BR><BR>
<TABLE BORDER=5 ALIGN="CENTER">
<TR><TH class="TITLE">Accessing Bean Properties</TH></TR>
</TABLE>
<% System.out.println("Accessing Bean Properties"); %>
<UL>
<LI><h:outputText
         value="#{favColors.col[0]}"/>
<LI><h:outputText
         value="#{favColors.col[1]}"/>
<LI><h:outputText
         value="#{favColors.col[2]}"/>
<LI><h:outputText
         value="#{favColors.col[3]}"/>
<LI>First Name = <h:outputText
         value="#{favColors.firstName}"/>
<LI>Second Name = <h:outputText
         value="#{favColors.middleName}"/>
<LI>last Name = <h:outputText
         value="#{favColors.lastName}"/>
</UL>
<BR><BR><BR>
<TABLE BORDER=5 ALIGN="CENTER">
<TR><TH class="TITLE">Accessing Bean Properties: JSP2_2</TH></TR>
</TABLE>
<% System.out.println("Accessing Bean Properties: JSP2_2"); %>
<OL>
<LI>${favColors.col[0]}
<LI>${favColors.col[1]}
<LI>${favColors.col[2]}
<LI>${favColors.col[3]}
<LI>First Name ${favColors.firstName}
<LI>Second Name ${favColors.middleName}
<LI>ThirdName Name ${favColors.lastName}
</OL>
<BR><BR><BR>
<TABLE BORDER=5 ALIGN="CENTER">
<TR><TH class="TITLE">Accessing Bean Properties: JSP from and submit</TH></TR>
</TABLE>
<% System.out.println("Accessing Bean Properties: JSP from and submit");%>
<h:form>
   Color 1
<h:inputText value="#{favColors.col[0]}"/>
<BR>
   Color 2
<h:inputText value="#{favColors.col[1]}"/>
<BR>
   Color 3
<h:inputText value="#{favColors.col[2]}"/>
<BR>
   Color 4
<h:inputText value="#{favColors.col[3]}"/>
<LI>First Name = <h:inputText
         value="#{favColors.firstName}"/>
<LI>Second Name = <h:inputText
         value="#{favColors.middleName}"/>
<LI>last Name = <h:inputText
         value="#{favColors.lastName}"/>
<BR>
<% System.out.println("Process"); %>
<h:commandButton value="Process"
action="#{favColors.processColors}"/>
</h:form>
<P>
Taken from
<A HREF="http://www.coreservlets.com/JSF-Tutorial/">
the coreservlets.com JSF 1.x and JSF 2.0 tutorials</A>.
</BODY></HTML>
</f:view>
The above JSP file is giving the below output on IE
Accessing Bean Properties: JSP2_1 result
First Name
Second Name
ThirdName Name
Accessing Bean Properties
red
green
white
black
First Name = Tarun
Second Name = kumar
last Name =
Accessing Bean Properties: JSP2_2
red
green
white
black
First Name Tarun
Second Name kumar
ThirdName Name
Why is there a difference in output between Accessing Bean Properties: JSP2_1 & Accessing Bean Properties: JSP2_2 when the code written is the same. My Controller bean class below
package task2;
public class FavortiteColors {
String[] col;
public void setCol(String[] col) {
this.col = col;
public String[] getCol(){
System.out.println("in getCOl");
String[] col = new String[4];
col[0] = "red";
col[1] = "green";
col[2] = "white";
col[3] = "black";
return col;
public String processColors(){
System.out.println("in processcol");
return "pass";
private String firstName = "Tarun";
private String lastName ;
private String middleName ;
public String getMiddleName() {
System.out.println("in getMiddleName");
return "kumar";
public void setMiddleName(String middleName) {
System.out.println("setMiddleName");
this.middleName = middleName;
public String getFirstName() {
System.out.println("getFirstName");
return firstName;
public void setFirstName(String firstName) {
System.out.println("setFirstName");
this.firstName = firstName;
public String getLastName() {
System.out.println("getLastName");
return lastName;
public void setLastName(String lastName) {
System.out.println("setLastName");
this.lastName = lastName;

FYI, If you don't want to use a prefix mapping, you can use JSFTemplating. It supports the Facelets syntax for composition / insert / define / include, etc. However, it doesn't rely on the DEFAULT_SUFFIX to find pages.
However, even though JSFT (and Faclets) have the ability to limit their scope to a subset of your application and/or behave well with other ViewHandlers. That doesn't mean the Tiles ViewHandler will... it might, I just don't know anything about it.
Good luck!
Ken

Strange behavior when "trying" to burn a disk.

At least I think this is strange behavior, following the instructions in the help viewer, topic "Backing up your music to a CD or DVD." One thing for sure, it's not burning a disc and it ain't telling me why.
I select the playlist and click "Burn Disc"
Requests a blank disc. I insert one.
Message "checking media"
after about a minute, the disc ejects
Message "checking media" displays another 30 seconds
No other messages displayed.
What the ??? Shouldn't it at least display an error message??
Super-Drive information..... from System Profiler
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: No
Using Sony DVD+R discs.
Mac Mini Mac OS X (10.4.8)

Whoops, sorry, this was while burning a playlist.
I've also tried some Pleomax CD disks (Samsung), with no luck. I've tried burning directly from iTunes, and from Toast 7.
Of the types I've tried, the Sony DVD's have been the best for me. Haven't tried many types though. Maybe I can get disks one at a time until I find a brand my burner likes.
Still, isn't it strange that there is NO error message? It just quits?
Mac Mini Mac OS X (10.4.8)

Strange Behavior with gMSA in Server 2012 R2

Greetings,
I have been doing some testing with gMSA Accounts in a Server 2012 R2 environment (two separate environments, actually), and I have noticed something very strange that occurred in both environments, which does not appear to be occurring in one of our customer's
self-managed environments.
We created a Group Managed Service Account using the following article:
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Everything went smoothly, and the account installs/tests successfully on both of the hosts that we are testing on. I am able to set my services to run under the account, and most of them appear to work fine. I am having some issues with a few of my services,
and I believe that the strange behavior I am seeing may have something to do with this - described below:
As soon as I set the service's Log On Account (via the Log On Tab under the Service's Properties), the entirety of the "Log On" tab changes to "greyed out," and I am unable to change the Log On account back via the GUI (Screenshot
attached).
I found that I am able to successfully change the account via Command Line using sc.exe, but the Log On tab remains greyed out! So far, I have found nothing to remedy this, but confirmed that it happens for any service I set to use the gMSA as the Logon
Account, and that it happens in 2 separate test environments, but not in a Customer's production environment - very strange.
All servers in this environment are running Server 2012 R2, and domain Functional Level is currently Server 2012.
I have been unable to find any information online about this behavior, so I am hoping someone has seen this before, and can explain why this is happening.
Nick

VIvian,
Yes, we used the Install-AdServiceAccount gMSA command on each host using the gMSA account, and then ran Test-AdServiceAccount gMSA, which returned "True."
However, one thing I noticed is that if I run Test-ADServiceAccount gMSA as a Local Administrator, it fails with the following:
PS C:\Users\Administrator> Test-AdServiceAccount gMSA$
Test-AdServiceAccount : The server has rejected the client credentials.
At line:1 char:1
+ Test-AdServiceAccount gMSA$
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : SecurityError: (:) [Test-ADServiceAccount], AuthenticationException
    + FullyQualifiedErrorId : ActiveDirectoryCmdlet:System.Security.Authentication.AuthenticationException,Microsoft.A
   ctiveDirectory.Management.Commands.TestADServiceAccount
If I run Test-ADServiceAccount gMSA as Domain Administrator, it returns true:
PS C:\Users\Administrator.<domainname>> Test-AdServiceAccount gMSA$
True
Is this normal?
Overall, I think the issue I am running into is at the Application Level, and not a problem with the gMSA, as it appears to be working. (Can Start/Stop services without any issues). I will be investigating my issue further with 3rd-party vendors, unless
you think there is something wrong with my gMSA accounts based on the information I have provided.
Nick

Strange Behavior from iTunes 7.2

Running itunes - 7.2Recently had my itunes library “corrupted” or non functional.
Spent a long, long time rebuilding the library (see below) and noticed some strange behavior that has me terrified that itunes is corrupted and I am going to loose all the hard work, etc..
1. I have about 100 GB of music in various formats (apple protected/itunes store, mp3 (128 to 320), apple lossless, wav) and when I tried to rebuild the library by clicking on add to library it only added about 65 GB of the 100 GB. I had to go through and figure out what was missing and manually choose the specific folder when I added it.
Major pain and very time consuming.
So it is not adding songs correctly, but through way too much effort able to work around this.
2. About ½ of the itunes store tunes I purchased are no longer apple protected format. Somehow they were converted to mp3 at 192kbs. Some of the songs play fine others are now not as crisp and make a poping sound or skip. How could this happen? Are these files corrupted? Will I loose them?
3. At the top center of itunes the information bar, where the read out is for what song is playing and how much time has elapsed in the song, is not working. When I click on a song it starts playing but the elapsed time bar and counter never move, and when the next song starts playing the information never changes. It is stuck on what ever song you initiate play with by clicking on it and the information stays frozen.
4. itunes randomly stops playing at the end of a song….If listening to an album it is usually after three or four songs and when listening to a play list it is usually after one song.
I am afraid itunes is corrupted and will not function correctly and I am going to loose the hard work I put in trying to recover from the last crash.
Any suggestions??
Can’t wait for time machine. I hope it works as advertised. If so I could just go back in time to the last time iTunes worked correctly and go from there.

First of all I hope that you have a good b/u of all your tunes - either on ext HD or on DVD. Don't forget to b/u the iTunes Library and .xml files at the same time.
Have you tried to reinstall iTunes? Drag the app to the trash and remove the iTunesX.pkg from HD>Library>Receipts>iTunesX.pkg. Using a fresh .dmg of iTunes 7.2 reinstall.
Have you repaired permissions with Disk Utility?
Is your Quicktime up to date? At least version v7.1.5.
MJ

Color Swatch Palette is Stuck

I am a designer working for a printer. We have a customer who is trying to add a new color to her CS4 document. She is selecting New Color Swatch - Spot - Pantone Solid Coated but is getting Process Coated DS colors -- the palette is stuck. Any suggestions? When she sent the document to me I didn't have any problems with the swatch palette.
Thanks for any help.

from the help files:
Restore all preferences and default settings
When InDesign is behaving erratically, deleting preferences (also referred to as “trashing preferences” or “removing preferences”) often solves the problem.
Do one of the following:
(Windows) Start InDesign, and then press Shift+Ctrl+Alt. Click Yes when asked if you want to delete preference files.
(Mac OS) While pressing Shift+Option+Command+Control, start InDesign. Click Yes when asked if you want to delete preference files.

Color Swatch changes when opened in Photoshop CC 2014

I'm not sure if anyone else has encountered this, here is the scenario:
I create a CMYK color swatch in Kuler and save the swatch, download it as a .ase file, and then load the swatch in Photoshop CC 2014.
When the swatch is loaded all of the colors are lighter than the colors in my kuler swatch.
The below image shows the top kuler swatch, and the colors that were imported once loaded in Photoshop.
TOP: screenshot of my kuler swatch from the kuler website
BOTTOM: screenshot of the colors from my swatch once imported into Photoshop CC 2014
Does anyone know why this is happening and how it can be fixed?
Thanks!

That's because color management is different in Kuler and PS. The good news is that Kuler Panel is now available for PS 2014 at https://creative.adobe.com/addons/products/2507
You can directly set active color from this panel or include the whole theme into the swatches panel without change in appearance.

Strange behavior - icon thumbnail instead of image - CC@OSX10.10

Hi,
my CC (@OS X 10.10.3) showing a strange behavior using vanishing point filter.
After defining grid and try to paste the image OS X paste the icon thumbnail instead of the image,
Many thanks in advance!!
br
Joachim

It is probably related to the fact that you are setting the tables row height in the renderer this will fire a render message when the height changes. One height is applied to all rows of a table. This means that is you have images of different heights you are continually changing the tables row height and therefore continually rendereing.
My approach would be to have all the images fit into a set size ( say 64*64 ( with scaling if neccesary ) you could then have a popup show the full size image if required.

Color swatch strange behavior

Similar Messages

Maybe you are looking for