Color Sync Between iPhoto and Photoshop

iPhoto's retouching tool does a good job for retouching small marks in a photo, but there are times when Photoshop is needed to do rechouching work.
While making a slideshow I noticed a colorshift when moving an image from iPhoto to Photoshop and then back into the iPhoto. To be more specific there is a loss of saturation as if the color space between the to programs are not sycncronized or embedded profiles are changed when an image moves between the two. The images are five mega pixle jpgs.
This issues is made more complicated because of color differences between iPhoto's edit window and the slideshow it's self while it is playing.
Apparently I'm missing something in using these to programs together.
Photoscene

Thanks for your help. I did change the value, but have not imported any new pictures yet into iphoto. I did figure out how to get Photoshop to not color shift on save. However I'm not sure this method is a good thing, since the only way to prevent the color shift on saves, is from the photoshop save as dialog box. you must turn off embed color profile. when I do this, there is no longer a color shift. however the color profile is no longer embeded in the picture. are there any negatives for doing it this way?

Similar Messages

  • Color discrepancies between iPhoto and Elements...

    Okay, enough ******** about iPhoto ’08. I actually like it, but I have had no problems, so far. Anyway, there is something a little quirky I have been noticing: I do like the new editor in iPhoto, but I still jump between iPhoto and Elements. I have noticed that my on-screen images are generally a little lighter and with much better skin tones while viewing them in Elements. In iPhoto they are a little darker and skin tones are more red. What am I missing? Is there a setting (Color Settings in PSE, Color Sync) I should be paying attention to? It would seem to me that the image should look identical regardless of which editor I am viewing the image in.
    Thanks for your thoughts…

    Old Toad wrote:
    TheGuyintheProj...:
    Try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If you're still at 10.4.9 update to 10.4.10 via the COMBO updater. Also make sure you're at the latest Quicktime version.
    Next, log into another account, create a library if there is none, import a couple of photos that are showing bad in your primary account and compare. If those photos appear correct there may be some conflicting preference files in your primary account. Here's how you can weed them out if that's the case:
    Trouble Shooting Preferences
    Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
    If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
    Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
    If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
    Lastly, rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
    OT
    Old Toad,
    Thank you for the advice. I have done everything you have suggested, except for the updating to 10.4.10. That is not an option. It trashed 5 of my machines and I am just now getting my main machine usable again. Thank God for backups.
    I have taken the worst pictures and viewed them in every photo viewing application that I have including the Finder/Finder Window in column mode, iPhoto 6 and 4, and they are as they should be. This is clearly an iPhoto 7.x issue.
    Thanks again!

  • RGB Color management between Illustrator and Photoshop

    Hi,
    I have a color management issue when exporting JPGs from Illustrator and opening them in Photoshop:
    In Illustrator (file is in RGB mode), I have a logo which has the color RGB 0/0/153 and I export a JPG. When I open the file in Photoshop, the color is RGB 1/0154.
    I have activated Adobe CC Color Manegement via Adobe Bridge (option "Europe, Universal 3"), which should produce consistent results in all Adobe applications.
    So which is the color that is actually in the file? And what do I have to do to get the color I want (0/0/153) actually exported from Illustrator? I need this color to comply with corporate design specifications of my client.
    Since I have to produce a lot of files it is not possible to readjust all colors in Photoshop ...
    Thank you!
    Michael

    First, check to make sure that the RGB working colorspace is the same for both Illustrator and Photoshop.
    When exporting the jpeg from Illustrator make sure the 'embed' color profile is selected, and it is the color profile that is required for your client. If this is for web use, then sRGB is your best choice.
    When you open the exported image in Photoshop, make sure that the color settings for Photoshop are set to 'Preserve Embedded Profiles'. After you open the image in Photoshop, you can double check by going to Edit > Convert to Profile... The source profile should match the embedded exported profile from Illustrator. If these match, your RGB color values from Illustrator and Photoshop should also match.
    If the source profile does not match, cancel out of the 'Convert to Profile" and go to 'Assign Profile". Assign the profile that you embedded when exporting from Illustrator. Now Photoshop should have the same values as Illustrator.

  • Can anyone help with workflow problem between iPhoto and Photoshop CS4?

    I am very new to CS4 Extended, having upgraded from Elements 6 recently. I use iPhoto '08 to do all my photo organization and really enjoy it, have a LOT of work invested in it and don't really want to switch to anything else if I can help it. One aspect I like about it is that it tucks away my original in case I ever need to revert. With Elements, I could set my iPhoto preferences to allow all my editing to be done externally using Elements 6, but it would only allow 4 photos to be sent over to Elements at a time. Then I would have to go back to iPhoto and "get" more. I thought that when I upgraded to CS4, I would at least be allowed four at a time to be sent from iPhoto to Photoshop for editing. Whenever I do this, it sends only one, maybe two, but never four. There doesn't seem to be any rhyme or reason to it. I'm annoyed at having to constantly go back for one or two photos at a time to edit and wondered if anyone knew of a workaround for this problem. The reason I have done it this way all along is that the two programs would work together and update my iPhoto pics and thumbnails automatically. Since then, I have just opened the iPhoto files from within CS4, but the edit doesn't update the thumbnails, only the enlarged versions within iPhoto. Neither Apple nor Adobe has been able to offer any solutions. I am not looking to create multiple copies of my files. I download straight from my camera to iPhoto. I could always just download them to a folder, edit them in CS4 and then import them into iPhoto, but that would necessitate making a copy of the photos to keep the originals safe and I'm not sure I want to have to organize all my originals elsewhere on top of my iPhoto library. I am very open to suggestions!
    Thanks!

    I appreciate your response. I recently did a reinstall, hoping it might help. It didn't seem to make any difference. Don't know if I need to just switch to a different program like Lightroom or just do all my editing outside of iPhoto and then import the results, but that defeats the purpose of letting iPhoto handle my originals so easily. I really like iPhoto and what it does, and have spent a lot of time getting my library compiled just the way I like with keywords, ratings and so on, and I'm afraid that switching to a new product will lose a lot of that work and either cause me to split my library into two places or to create unnecessary duplicates.

  • Color discrepancy between FCP and Photoshop

    I'm having trouble with a discrepancy b/w FCP text and Photoshop text. We chose a color of 162-56-25 (reddish orange) for FCP text for a project I'm editing. When we created graphics in photoshop and After Effects with those same values, and brought them into final cut, the color ended up being much lighter. Anyone know why? We've got multiple people working on the project, and on the the graphics. I'd like to standardize the color value, instead of having everyone trying to match. Tks!

    Sure. But if I'm looking at BOTH the FCP generated text and the Photoshop and AE graphics in final cut, and on the same monitor, shouldn't they look the same? I don't mind if I'm not seeing them with complete accuracy in FCP, i.e. I don't mind if they look slightly different on different monitors, but I want them all to match.
    Does that make sense? I guess the key piece of info I left out is that I'm looking at the AE and Photoshop text IN FINAL CUT.

  • Color changes between Lightroom and Photoshop Elements

    I have a new monitor and I have the SyderPro4 calbration software.  My monitor is the Dell UltraSharp U2713HM.  When calibrated with the Syder my colors are different when I go into different programs.  The same photo looks different in Lightroom than it does in Photoshop Elements. When I export the picture from Lightroom to Elements the picture becomes very orange. I have already talked to Dell and to Datacolor about my issue and they both are telling me this shouldn't be happening. When I uninstall my calibration software my problem goes away, and the colors of the images stay consistant between the two programs. Does anybody have any advice to what maybe wrong?

    How do you export to Elements? Directly from Lightroom? If so, what profile are you choosing? What resolution are you specifying? I normally use proPhoto RGB which is the profile that LR more or less uses internally and 330.

  • Color spaces in Lightroom and Photoshop

    I read that Lightroom uses the large ProPhoto color Space and then again, that it's gamma curve ist close to sRGB. So what is my color space when working in Lightroom? ProPhoto, or sRGb, or something else?
    And what kind of a color management workflow between Photoshop and Lightroom do you advocate? Using ProphotoRGB or sRGB as color work space in Photoshop? I used to work in AdobeRGB in Photoshop. Has this to be changed to gain maximum color consistency?
    Thanks again for any help!
    Johann M Ginther

    Hey Claude,
    if it did not have an attached profile it is almost definitely in sRGB or, more rarely, Apple RGB. Lightroom always assumes sRGB for untagged files which is typically a safe bet. Photoshop generally uses the working space for untagged images. Since you had adobeRGB there, you should get a more saturated image in photoshop then in Lightroom. The same data is simply interpreted in a different color space leading to different colors. This has nothing to do with the monitor profile therefore and my initial hunch was wrong. So for untagged images in photoshop, you should usually assign sRGB to them instead of working space.
    >As for calibration hardware we do use them here so I will use it but since the Mac was brand new out the box I assumed that it was ok...
    Unfortunately, in general the canned calibration is not very good on Macs. I find very large differences between the shipped profile and a profile generated by a calibrator. Also, Apple ships profiles that set your display's gamma to 1.8 instead of the standard 2.2. This leads to many images in webbrowsers being too low contrast. Even Apple suggests recalibrating your screen at 2.2 if you do digital photography work (it's in their Aperture help files). In this case though the difference between Lightroom and Photoshop had nothing to do with the monitor profile but was related to photoshop interpreting untagged files in its working space instead of the more likely sRGB space.

  • COLOR DISPLAY IN LIGHTROOM AND PHOTOSHOP

    Hi I am a new user of Lightroom but a longtime user of Photoshop.
    My question is this:
    When opening the exact same TIFF file in Lightroom and Photoshop CS3 is there a way to configure Lightroom so that it will display the image exactly like Photoshop ? I mean the difference that I get is not dramatic but if there is a way to make it perfect I would love to know.
    Thanks,
    Claude from Montreal

    Hey Claude,
    if it did not have an attached profile it is almost definitely in sRGB or, more rarely, Apple RGB. Lightroom always assumes sRGB for untagged files which is typically a safe bet. Photoshop generally uses the working space for untagged images. Since you had adobeRGB there, you should get a more saturated image in photoshop then in Lightroom. The same data is simply interpreted in a different color space leading to different colors. This has nothing to do with the monitor profile therefore and my initial hunch was wrong. So for untagged images in photoshop, you should usually assign sRGB to them instead of working space.
    >As for calibration hardware we do use them here so I will use it but since the Mac was brand new out the box I assumed that it was ok...
    Unfortunately, in general the canned calibration is not very good on Macs. I find very large differences between the shipped profile and a profile generated by a calibrator. Also, Apple ships profiles that set your display's gamma to 1.8 instead of the standard 2.2. This leads to many images in webbrowsers being too low contrast. Even Apple suggests recalibrating your screen at 2.2 if you do digital photography work (it's in their Aperture help files). In this case though the difference between Lightroom and Photoshop had nothing to do with the monitor profile but was related to photoshop interpreting untagged files in its working space instead of the more likely sRGB space.

  • Can I switch between Illustrator and Photoshop? (I am subscribing to only one product per month)

    Can I switch between Illustrator and Photoshop? (I am subscribing to only one product per month)

    Absolutely. Just change the sim card and the APN details in the settings. You can do this either manually if you know them or just sync with iTunes after changing the sim and the details will sync. Once you have done it once for each network the device seems to remember the details.

  • I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

    Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

  • Pages won't sync between iPad and Macbook

    I cannot get my pages to sync between iPad and Macbook.
    I regularly go back and forth between the two because it's easier to read/edit on iPad and easier to type/copy-paste web info on Macbook.
    I'm finding right now that I have done a multitude of edits on my iPad that are not showing up at all when I open the same document on my Macbook.
    I have closed the document on my iPad so I expected there to be no problems when I opened it on my Macbook.
    Not sure why or what to do....?

    I had this issue too - I have been playing around with it for a few days - turns out you need to save the documents on your mac not under "documents" but rather under "Pages - iCloud" (or "Keynote - iCloud" etc.). After doing this, the document appears on my phone, iPad, iCloud.com etc. with the changes.
    One way to do this is by clicking the dropdown arrow (it shows up when you mouse over the title) to the right of the title of your document on the grey title bar (the thing at the top of the page - above insert, table, chart etc.) and then editing the "where" column.
    Hope this helps! If it isn't clear enough, please let me know!

  • Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.

    Sync between MacBookPro and iPhone 3G does not sync properly.  Calendars duplicate events but worse is that only contacts from Address book from letter T onwards sync.  Any contacts on iPhone which are not on Mac are lost during sync.
    Solutions?

    No, I never really found an easy solution.  I believe it is an issue with some corruption in the iTunes database on the specific device.  In my case, both my iPad and iPhone now show duplicate stream songs if viewed through iTunes on my Mac, but they show different songs.  A couple years ago I had a similar issue on my iPhone, and Apple support suggested I back up the phone, completely reset it, and then restore it from the backup.  It did work, so I imagine it would probably work for my current issues with the iPhone and iPad.  But resetting and restoring an iPad or iPhone always makes me a little nervous that something will get lost.  When I did reset/restore the iPhone, I do have to say, the restore process was 100% perfect and I did not lose any data at all even though Apple support said I might.  If you try to go that route, I would suggest backing the device up both to a computer through iTunes, and to the iCloud so that you have a double backup.
    None of this really resolves the issue with how the iTunes databases are becoming corrupted on the apple devices though, so it is very likely to happen again until they fix it.  I have been unable to determine if there were any specific actions or conditions which caused the corruption to happen in the first place.
    Might be worth another call to Apple support, or dropping in the local Apple store if you have one near by.

  • Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Can someone please tell me a simple but effective method for burning a slideshow to DVD? Now that the connection between iPhoto and iDVD no longer exists, I can't figure out a way to get there with an acceptable quality result.

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    OT

  • HT5295 How to sync between iPhone and iPad?

    How to sync between iPhone and iPad at Podcasts app?

    Please elaborate - share what?
    Just guessing here...
    Any sharing is probably a result of being logged in with the same Apple ID on both devices.
    For apps/music: Settings > iTunes & App Stores > Automatic Downloads OFF.
    For iCloud: Settings > iCloud > Delete Account.
    For iMessage: Settings > Messages > Send & Receive.

  • I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    velma Monreal wrote:
    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
    Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Maybe you are looking for