Color sync not working

I'm using SL 10.6.2 and an Epson stylus photo r280 and can't get my colors from Photoshop elements 8 or IPhoto to print correctly. I've calibrated the display and tried all the color management settings on the print setup dialog. Any ideas about how to fix this? The colors are really way off, not just a little.
Message was edited by: annefishes

I found my problem. It was some bad ink cartridges. After I went through and replaced all six cartridges the problem went away. The error message doesn't specify which cartridges to replace, just 'replace ink cartridge'.

Similar Messages

Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?

I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

Pick color feature not working properly -- how do I reset?

Pick color feature not working properly -- how do I reset?

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

"Select Color Range" not working. "Warning: No pixels were selected" returned when attempting to use. Using Photoshop CS6 on a Mac running OS X Yosemite

Here are three screenshots in succession from trying to perform the color selection:
Dropbox - Screenshot 2015-02-12 14.57.40.png
Dropbox - Screenshot 2015-02-12 15.00.14(2).png
Dropbox - Screenshot 2015-02-12 15.01.00.png

Itunes Wi-Fi Sync not working on Ios6

Itunes Wi-Fi Sync not working on Ios6. It was working with Ios 5.

OK OK OK
I tried all of the above ideas
none worked for me!
I had already re booted, but I rebooted again, the phone, router, comp (iMac)
I changed the name of my phone, I had a lot of hope riding on that idea, it sounded good, but (sigh) no go!
finally I got it working
this is what I did, I hope it works for you (at least on a Mac)
open
system preferences - Sharing
I clicked on internet sharing, but did not 'tick' the box (mine was off & is still is off now)
I 'ticked' the Wi-Fi tick box
and got out of preferences (i did not 'tick' the internet sharing box, dunno if that is importiant, just what i did)
my iphone 5 popped up in iTunes over Wi-Fi in like 5 seconds and has stayed there since i did a wifi sync
happy days

Final Cut 6 and Color does not work

Hello,
I bought FInal Cut Pro Studio 2 and i receive the suite today and instal only apps ( no contents and loops )without problem
Tried to open FCP6 and Color but not working.
i launch FCP 6 or Color,2 jumps on dock and then quit.
can be memory problem.( i have 768RAM on my imac G5 64VRAM)
any pacth to resolv this problem?
ps* SountrackPro 2,DVDStudio Pro,Motion3,LiveType,CinemaTools and Compressor woks fine in the same computer
Computer configuration
IMac G5 1.6 with 64VRAM and 768RAM
thx in advance

Ok,forgot Color,but and about final cut 6 ? why does not work?
max resolution 1440x900.
i was looking the systen requirements on fcp page
Minimum Requirements to Install All Final Cut Studio Applications
Final Cut Pro 6
Macintosh 1.25GHz or faster PowerPC G4, PowerPC G5 = OK
1GB of RAM = NO,my iMac have 768RAM
1024-by-768 resolution or higher OK
Mac OS X v10.4.9 or later OK
QuickTime 7.1.6 or later OK
A DVD drive for installation OK
Can i deduce that problem is because i don't have RAM enought?
THX

Active Sync not working

I am having an issue with active sync not working. I am looking for updates from my resource every 5 minutes for changes. My enviornment is such:
IdM Version 5
App server: Weblogic 8.1.6
IdM is looking at AD (2003) for changes.
My log files look like such:
2007-02-06T13:20:07.794-0500: Started, paused until Tue Feb 06 13:25:00 EST 2007
2007-02-06T13:25:00.049-0500: Pause completed
2007-02-06T13:25:00.095-0500: Polling
2007-02-06T13:25:00.111-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:25:01.064-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:25:07.767-0500: Poll complete.
2007-02-06T13:25:07.767-0500: SARunner: loop 263
2007-02-06T13:25:07.814-0500: Started, paused until Tue Feb 06 13:30:00 EST 2007
2007-02-06T13:30:00.053-0500: Pause completed
2007-02-06T13:30:00.068-0500: Polling
2007-02-06T13:30:00.084-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:30:01.240-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:30:08.021-0500: Poll complete.
2007-02-06T13:30:08.021-0500: SARunner: loop 264
2007-02-06T13:30:08.084-0500: Started, paused until Tue Feb 06 13:35:00 EST 2007
2007-02-06T13:35:00.057-0500: Pause completed
2007-02-06T13:35:00.088-0500: Polling
2007-02-06T13:35:00.104-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:35:01.229-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:35:08.166-0500: Poll complete.
2007-02-06T13:35:08.166-0500: SARunner: loop 265
2007-02-06T13:35:08.197-0500: Started, paused until Tue Feb 06 13:40:00 EST 2007
2007-02-06T13:40:00.030-0500: Pause completed
2007-02-06T13:40:00.030-0500: Polling
2007-02-06T13:40:00.045-0500: Looking for updates with filter: (objectCategory=person)(uSNChanged>=71766297)
2007-02-06T13:40:01.014-0500: Looking for deletes with filter: (uSNChanged>=33117487)
2007-02-06T13:40:07.795-0500: Poll complete.
When I run these search filters I get results from my AD. When IdM runs the search they are coming back blank. Any ideas?
Thanks,
Chris

If you have changed environments... or for some other reason, your USN number on the AD resource could be lower than the number passed in the query.
Manually edit a user in AD, and then check the USN number of the object. See if it is lower then the query is passing. If so, you can manually edit the IAPI_ResourceName configuration object and alter the USN number passed in the query.

ICloud sync not working with BBQ10

Hello.
Having recently swapped my iPhone 5 to BBQ10 I have been hit by an enormous amount of hassle. The main thing being the ability to sync my contacts and calender from my Mac on to the Q10.
I have followed the online instructions and it is not working. All I get is a white screen where something tries to load and nothing happens. I can't delete the account because then the white screen comes back with the loading logo. Then I have to reinstall the entire phone and start all over again. What am I doing wrong? I have the latest firware on the Q10 along with the latest Mac OS (10.8.4)
I am not a pure amateur but everything was really easy on the iPhone 5. It's a shame, I really want this to work but the Q10 is giving me no joy whatsover at the moment.
Please help!

Hey,
Welcome to the BlackBerry® Support Community Forums.
To better assist you, are you following the steps outlined here:
How to integrate iCloud contact, calendar, or email accounts on the BlackBerry 10 smartphone
http://btsc.webapps.blackberry.com/btsc/KB33812
If yes, at what step does the screen go white?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Wi-Fi Sync not working Windows 7 64 bit iOS 5 Itunes 10.5

The computer where Itunes is installed is hard wired to a switch which is connected to my wireless router. I am unable to sync wirelessly to my Iphone 4. I have iOS 5 installed and am running itunes 10.5. I connected iPhone to computer with the USB cable for initial sync and checked sync this iphone over wi-fi under iphone > summary > options in itunes. I can use the apple remote to control my itunes library so I do know that I am connected on the network, yet Wi-Fi sync will not work. My hardware configuration is as follows Windows 7 Profeesional 64 bit, Cisco Lynksis switch, Netgear WNDR 3700 router, I am running Norton 360 but I had completely removed it and tried syncing but that made no difference. Any help would be appreciated. Thanks in advance.

Update
After trying ever tip posted in these discussion threads (firewall, restarting itunes, resetting phone, disabling and re enabling UPnP on router, etc. etc.) the only thing that worked was uninstalling itunes and then re-installing. At first the phone appeared after unplugging right away but then disappeared after 5 minutes. After restarting itunes it seems to have fixed itself and I couldn't be happier. Anyone having problems with the wireless sync should try uninstalling itunes and then re-installing. It worked for me.

Secondary color correction not working in Premiere CC

Greetings,
I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
Premiere CC 2014.1 Release
8.1.0 (81) Build
Macbook Pro Retina, 15" Late 2013
2Gh Intel Core i7
8Gb
Intel Iris Pro 1536Mb
Yosemite Version 10.10
*note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
Anybody else have this problem or know of a fix?

I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          6-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          12
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          16 GB
Software OS X 10.9 (13A603)
Graphics ATI Radeon HD 5770 1024 MB

Firefox sync not working correctly

I set up sync and used my favorite gmail address (sun-).
It seems I should have used the gmail address I set up my google/gmail account with ( allu-)
Now it seems I have sync on my computer, and my tablet, but I'm not sure. I know this sounds weird, but when I have sync set up on my computer, and I go to pair a device (my tablet) I have sync numbers in both my computer, and my tablet, and I am unable to erase the 3 boxes to add in numbers to either device.
I still would like to add my android phone, but I would like to fix this problem.
I guess what I would like to do is delete/uninstall my 'sync' account so I can start new with my google/gmail account (allu-).
I thought i did this, but the same thing came up, numbers in both sync set up pages on my computer, and tablet.
So maybe I have this entirely wrong, and I need to look at it from another perspective, but whatever reason, it is becoming frustrating because I need this, want this, and can't make it happen. So I would like, no need some help with this, so I can coordinate all my devices with Firefox.
I am thinking this is possible with what I read, but like I said I am definitely missing something, or I have made some mistake, that can't be fixed, because that is what I seem to have done. HELP

That seemed to work. I have not tried to sync my other devices yet, but I am hopeful.
It almost looks like you are saying the Aurora version 28 is a version to switch to, when it is released.
Will I be notified by Mozzila when this comes out?
I know I might be taking advantage of you with these questions, but it is hard to find good answers without spending lots of time searching here, there and everywhere, so to speak.
So one more question, how come my password saving has stopped. It worked in the past but as of late, it sporadically asked me if I want to say updated passwords, and then it doesn't. I have a few sites, that use to have there passwords saved, and now I get nothing, very frustrating.
So is there anything I can do to get my passwords back.
I have switched from Ice Dragon when that didn't do well with passwords, then tried Chrome, I liked that as well, but then I realized that wasn't doing as good as Firefox did for me, so now I am back to Firefox, and that is not working very well either
Thank you for what you do.................................
Mike

Aperture to iPhone sync not working

I am trying to sync photos from Aperture to my iPhone and something is not working. The photos and albums that show up in iTunes when I select the iPhone are old and have been deleted from Aperture. Most of them are sample bird photos that came with Aperture. Those are long gone but they still show up in iTunes and my new albums don't. iPhoto sync works though. Any suggestions on what to try would be appreciated.

If I had this problem, I'd try shaking things up by following instructions to create a new Aperture library, and then checking whether iTunes reflects the projects of the new library. If so, there's a good chance the problem will correct itself when Aperture is instructed to open the main library.
I'd also see if there's an old library on my hard drive (with the demo bird photos) and I would delete that library and check whether iTunes now lists no projects at all.

Why is wirless sync not working?

I have the box that asks if you want wirless sync to work on your phone, and it was working until I updated to 5.0.1 I have resynced my devie multiple time manually but wirless sync stil does not work I have an iPhone 3GS and an iPad 2 that both do the same thing

Apparently nobody knows what is going on and when it's gonna be fixed....

Why is sync not working

My sync is not working ... i am told it's my corporate firewall but cannot locate any info on which port, ip or URL to give to my IT guys.
HELP

What happens when you try to play a track in iTunes?

Color sync not working

Similar Messages

Maybe you are looking for