Color: toggling between changes

I'm learning Color. Lotsa fun. As I whiz through all the tutorials I can find, including those that came with Color, I notice that one is able to one-click toggle between the change and the original... but I can't find anywhere how this is done. It's so obvious I suppose, that it isn't included in the tutorials.
And I figure one of you out there will take pity on me, and save me an hour of poking through the digital manual...
All ears and expectation ... and with much appreciation...
Ben

Hi Shane,
Did some tests. The Color Scopes/Viewer gives exactly the same read as I get from Final Cut itself ... it's identical in terms of what the eye sees on these two monitors.
I did an extra little test - getting a screen shot of the various comparisons, Apple Cinema screen, Samsung, FCP & Color. When you line up the same shot in the various combinations ... it's exactly the same.
I love the idea of high-end monitors and a really pro colorist in an expensive post setup. But the last film I did (using a single Apple Cinema display) looked pretty balanced from my Apple Monitor to a huge 58 inch Panasonic Plasma, to what I saw on TV.
I think of a friend of mine, Mercan Dede, who is at the top of the charts every year for World Music - number one for years in Europe. Hans Zimmer bought a bunch of Mercan's tunes for a Ridley Scott film a few years back. Hans (with his 6 million dollar studio) wanted to know where Mercan had recorded his music. Exquisitely recorded, amazingly sophisticated layering and delays (a subjective opinion granted, but I did spend a huge chunk of my life producing albums in high-end studios). Mercan would never tell Hans where he recorded his music. I'll tell you. He did it on a 15 inch Mac laptop using Ableton Live, with a single mic, except for percussion. And a lot of hours.
All the best...
Ben

Similar Messages

PLMD_AUDIT - Toggle between Display and Change - Important!!

Hello all,
I've a problem when I work on PLMD_AUDIT.
Pre-requisite for replicating the issue.
1> Change the settings in PLMD_AUDIT (a face like icon) to Display mode
When I run PLMD_AUDIT for an Audit with Action, it displays me the "Grouping" field and the "Involved Persons" tab values correctly.
But when I toggle from Display to Change, the value in "Grouping" and the "Involved Persons" tab vanishes.
Can you please check in your system and let me know if you also face this issue?
Thank you in advance,
Vaishnavi

Hello Keerthi,
Thanks for your reply.
Please follow the below mentioned steps.
1) Change your time zone to a different time zone other than the created time zone of the action.
say if action has been created in London time zone, change system zone to some other than London.
2) Change the Settings in PLMD_AUDIT tcode (face like icon) to Display
3) Open any audit WITH ACTION.
4) When you double click on Action inside the audit, the action will be opened in Display mode.
5) Now toggle between Display and Change.
6) Kindly check if the values in the "Grouping field" and BUPA roles in "Involved Persons" tab are present now after toggling?
Please let me know at the earliest.
Your assistance is highly appreciated in this regard.
Thanks in advance,
Vaishnavi

How to change the capture resolution of CaptureDevice and toggle between front and rear camera

Hi. I'm using Visual Studio 2013, and the Windows Phone App template. I'm using the Microsoft.Devices / CaptureVideo API to capture video. I now want to set the resolution to capture the video in a specific(available) resolution. How do I do that?
Code snippet reference to API:
CaptureVideo vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
and I also want to put a button there to toggle between front and rear camera. If I click the button, and the rear camera is currently active, the front camera must become active and vice versa. How do I do that with this API?
Thank you.

visit this page to know how.
http://stackoverflow.com/questions/25466088/how-to-switch-to-front-camera-in-windows-phone-8-1-winrt-jupiter

Toggling between 2 hard drives running different OS's

I recently added an internal 500GB SATA drive to my G4 (partitioned 100GB for apps and remainder for storage). The old HD is running OS X 10.2.8, and I initialized the new HD with a fresh version of OS X 10.3.
Silly question: Is there a more efficient way to toggle between the two Operating Systems, other than rebooting?

Hi, thud92666 -
Is there a more efficient way to toggle between the two Operating Systems, other than rebooting?
No.
That is the only way it is possible to switch from one OS to another; where the OS's are located, on the same drive or on different drives, makes no difference.
Decades ago, when the Mac OS was much simpler, it was possible to do that. That changed along the way, around OS 5 or 6 as I recall, maybe earlier, when the OS started becoming larger and more complex.

Need help with Color Profiles between Photoshop and iPhoto

Hey guys, I'm a photographer and have always used Photoshop in comination with iPhoto. I am having great difficulty lately with color profiles randomly changing within albums of pictures. I need all of my images to be in sRGB, but some somehow end up in Adobe RGB. It seems to happen at random. Apple seems to think it's an Adobe problem. Adobe isn't sure what to do. Anybody aware of any known issues between CS5 and iPhoto using OS 10.8.4 with regard to color profiles and how to fix them?

SRiegel schrieb:
I don't know inkscape, but this article seems to indicate that is will support cmyk.
The article also says you need Scribus to then further process the SVG file.
@shaunamm You need to open the SVGin Illustrator, not place it. But I doubt that you will be able to get the effects in Illustrator.

Toggle between Rosetta and Universal

I just installed Flip4mac wmv, in the post is suggested that I select Rosetta in the Get info panel that all went well and I was able to watch the wmv file, no problem.
My question is how do I get out of or toggle out of Rosetta back into Universal. I have looked on different sites, I must have missed something, I can't seem to figue out how to do this.
Please excuse my lack on knowledge, this is my second week on a Mac.
Many thanks.

I went into Quicktime and was able to select Get Info to change to Rosetta, yet there is no option to go back to universal. What I m reading on the posts that suggested that you can toggle between Rosetta and Universal, or am I misreading that.?
My Mac Pro is Intel chipped.

Color shift between Library and Develop module

Hi,
I recently noticed a color shift between in the image when going from the library to the develop module. Yes, I know this is mentioned in the FAQ, but I did not find the solutions given there to be satisfactory.
Let me explain what happens: I have taken Photos with my Canon EOS 300D, in Jpeg mode with Color Space in the Camera set to AdobeRGB. The photos I am talking about were taken with Tungsten light with auto white balance and have a distinct orange color cast. I use Windows XP and view my Photos on a LCD Display calibrated with the Pantone Huey system. The Lightroom Library Module and Photoshop CS2 both display the original image almost identically (there are no changes applied inside Lightroom or Photoshop, I view the original image in both applications). Photoshop is set to use the Adobe RGB Color space as its working Color space, Softproofing is switched off. However, when I switch to the Develop Module, the colors (especially the orange hues) shift very noticably toward pink. I can only assume that the Colorspace conversion or maybe some implicit soft proof used differs between the modules. So, to restate the problem: If I switch back and forth between Library and Develop, without changing anything and in 1:1 view to avoid errors introduced by different zooming methods, the colors shift quite drastically back and forth.
I have to say that this is really quite annoying. The whole point for me to use the develop module is to use it to make adjustments to the colors, and for this to work properly I have to see the same colors in both modules and in Photoshop. There is no point in correcting a pink color cast away in Develop that is not even there in either the library module or Photoshop (and that would then have a stronger orange tint because I tried to counter the pink tint in develop).
So this leads me to the final question: Is it possible to tell Develop to use the exact same color settings as the Library Module? Or is there another way to compensate for the color shift?
I hope I was clear in what happens and what I tried to do. If it helps I can gladly provide a sample photograph that clearly illustrates the point.
Thank you in advance for your help,
Daniel

Thanks for your comments, Don and Fred. I hope that this issue will be worked on soon.
Fred, I have set the Preview Quality to High, but it doesn't seem to make any differences concerning the color shift. I have investigated this matter further by now and made the following observations:
*The color shift is a lot less noticable on my laptop (the laptop screen is also color profiled). On my laptop the change is more of a subtle shift in contrast than in color. This might be caused by the smaller color gammut of my laptop display though.
*I have uploaded a testimage so that others can check if this shift occurs at their workstations too - after all, it might be a misconfiguration of my color management software, though I doubt that (because Adobe already states that library and develop render different previews). I would be interested if the color shift I describe is noticable at other workstations too. The link to the testimage: http://www.danyx.com/colorshift.jpg (permission to use the image to test the color reproduction is of course granted hereby).
Thanks for your help, I hope Adobe will listen soon,
Daniel

Toggling between foreign language keyboards possible?

Hi!
I am learning Hebrew and would like to make flash cards on my Mac, which means I'll be typing in both English and Hebrew. I've already successfully set up the Hebrew and English keyboards via the International Preference Pane.
My question is: *Can I toggle between the Hebrew and English keyboard??* This would be such a huge help (vs having to use the mouse!).
Thank you!!

yes, you can. go to system preferences->international->input menu. check the box next to Hebrew. This will activate input menu in your menu bar. you can switch between inputs there. also, you can use keyboard shortcuts to do it that way. i don't remember what are the default shortcuts to toggle input menus but you can see them in system preferences->keyboard&mouse->keyboard shortcuts. you can also change them to what you want there.

Toggling between voices in Text-to-speech

Hi!
I'm using my MPB to study both languages English and French and every time I want to change from the English default voice in text to speech change it to french i have to go to system preferences to change it
is there an eaisier way (likea menue button that toggles between the two voices: tha English one and the french one)

Which voice are you using? Here's a response from that page from Dr. Allen:
"This is because the codes are for the Loquendo voices, not the Neo-Speech voices. I don't believe that the NeoSpeech voices use these codes. You might search forums & the blog to see if there are similar triggers for Kate & Paul."
HTH
Dave

Color variations between AI CS2 and Photoshop

I'm new here and really don't know technical terms for what I'm trying to explain, so please forgive the gibberish. I have an Illustrator CS2 file that someone is printing for me using Photoshop. When he opens the file the colors I selected in Illustrator all change slightly and look much duller when printed.
Is there a way to maintain color accuracy between the two applications? If so, how would I go about changing the colors in my existing artwork? Thank you!

Thank you for all your feedback.
Here are the scopes. All I'm doing to get the change is sending it to AE. No changes elsewhere. Just that simple send to AE and it starts playing with the colours.
I have also noticed that when I reload my projects a lot of the time I have to re-render the entire film. I did update the Adobe software when it became available.

Color Sync Between iPhoto and Photoshop

iPhoto's retouching tool does a good job for retouching small marks in a photo, but there are times when Photoshop is needed to do rechouching work.
While making a slideshow I noticed a colorshift when moving an image from iPhoto to Photoshop and then back into the iPhoto. To be more specific there is a loss of saturation as if the color space between the to programs are not sycncronized or embedded profiles are changed when an image moves between the two. The images are five mega pixle jpgs.
This issues is made more complicated because of color differences between iPhoto's edit window and the slideshow it's self while it is playing.
Apparently I'm missing something in using these to programs together.
Photoscene

Thanks for your help. I did change the value, but have not imported any new pictures yet into iphoto. I did figure out how to get Photoshop to not color shift on save. However I'm not sure this method is a good thing, since the only way to prevent the color shift on saves, is from the photoshop save as dialog box. you must turn off embed color profile. when I do this, there is no longer a color shift. however the color profile is no longer embeded in the picture. are there any negatives for doing it this way?

UFT 11.53 - toggle between keyword view and editor not working

Hello,
I have installed the enterprise version of UFT 11.53. I have patched it with Patch # 3 (00082) and Patch # 4 (00106) in order to get Chome v 37 support. Now when I try to toggle between keyword View and editor, it is not working. The editor is fine. The Keyword just set frozen and will not allow me to do anything other than, change it back to the editor
see when I click the toggle button...its frozen...see the toggle button is down.
It's so annoying. I'm going to have to uninstall it again.
Please help, if you know what's going on

Hello sfarren,
The forum you want is the HP Enterprise Business Community.
Right now you are in the consumer products forum.
I am guessing this link is the area you will want to ask your question at.
http://h30499.www3.hp.com/t5/Unified-Functional-Testing/bd-p/sws-Fun_TEST_SF
Good luck and hope it helps.
PS: You might have to register again to post on that forum.

AI color variation between documents

I am struggling with color variation between different documents in AI. Even when both documents have been assigned the Adobe 1998 RGB color space, and colors are identically called out in RGB, my output varies between the documents. This is difficult as when I do color management is a "swatch" document to get my client approval, then insert that color into a different document, it changes. Any input?
Thanks

HI,
We are using the Latest CC version on the latest MAC OS. We use a third party RIP to drive our digital printing working in the RGB space.
It just appears the color space gets duller or more vibrant depending on which "setting" is embedded at the creation of the document- which seems to be the same for all docs - Adobe RGB 1998, yet is not yielding consistent results from file to file.

Simple-how can I toggle between screens

Ok...this is really simple, or it should be. Can I change a preference anywhere on my Mac to where I can not only toggle between programs with the "apple key + tab" shortcut, but toggle between open windows within a program?
For example, if i have iTunes open and Safari open I can toggle (switch screens/windows) between the two with the "apple key + tab" command but I cannot toggle between screens WITHIN a program. If I have Word open and I am working on two documents and I want to go from the forward window that I am working in to the window behind it I have to manually, with the mouse point and click on the window at the back.
Is there a preference I can change somewhere on my Mac or no? I've looked but maybe I'm not looking in the right place.
Curlz

Who says it's undocumented? It is documented several places. In Mac Help, search for "Keyboard shortcuts"; select "Full keyboard navigation" or "Shortcuts for windows" -- this is documented both places and probably others as well.
Also, in System Preferences > Keyboard & Mouse > Keyboard Shortcuts, you can change shortcuts, or disable them, or just see what they are currently set to.

Toggling between functions on wireless keyboard

Can someone point to the instructions for toggling between the general function key and the programmed function that comes installed with the keyboard?
For example: I want to use the F12 key to control volume and to also use it to toggle Firebug on and off.
Thanks.

toggling between the general function key and the programmed function that comes installed with the keyboard
It might be less to remember to program Firebug to open with Command-F12 (for example). That command opens Firebug in a new window by default, but you can change that to have it open in a split window in Tools > Firebug > Customize Shortcuts.

Color: toggling between changes

Similar Messages

Maybe you are looking for