Colored back ground link not showing

Web site has an editable region that is green.
When I go to post a link it will not show up. I went to the page properties to change the color , hit apply, and it does not change the color. Help!

Sorry but you'll need to be a bit more specific to have this answered properly. Posting a link to your site would help, as well.

Similar Messages

Back Ground Job not showing in SM50,

Hi Friends,
I am running XK99 to Mass update Vendor details in Back ground, I am getting some error while running the job in back ground, I would like debugg the issue.
But in SM50 Iam not able to see the job I sechduled using program MASSBACK or transaction XK99.
Please let me know, what could be the problem.
Thanks,
Veerendra.

Hi,
Try this - goto SM37 select the background job and enter JDBG in the command field (similar to entering /h to debug).
Cheers.
...Reward if useful

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn that app back on. Would there be any way I would be able to get the data from that app?

I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?

LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible.

Generic Enrollment link not showing up on Portal

Hi,
Generic Enrollment link not showing up in portal. I have Adjustment reason record in 378 and openenrollment is open.
Both are open but I do not see General enrollment link in portal.
Even I took off proxy class entry from genral enrollment CL_BENEFITS_AREAPAGE for testing then only open enrollment link come up.
How can I show both generic enrollment and open enrollment together.
I appreciate immidiate help.
Regards
Mark

Hi Mark,
Please ensure that the user has read access to Infotype 171 (General Benefits Information) for Authorization Object P_PERNR.
You don't have to take the Proxy Class entry out. The proxy class is required as it determines which links are displayed based on the employee country code and benefits adj reasons.
Thanks,
Zubair Khan
Edited by: Zubair Khan on Nov 16, 2011 11:22 PM

Backed up iPhone not showing in iTunes

I backed up my iphone before getting a new one but when I connect it to iTunes the back up does not show. Is there any other way to get the back up?

All backups are stored in iTunes from Edit > Preferences > Devices. If you dont see it there. you're doing it wrong. http://support.apple.com/kb/HT1766

Scheduled back ground job not finishing

hie gurus, i need your help with back ground scheduling , i have created a background schedule to run my program after every 30min . in the job overview it shows my job released and active but its not finishing processing . the program being run picks up data from an external data base and then inserting via BDC call transaction. i have tried with a different program that inserts data into a database table and its executing and finishing well in the back ground. What could be the problem ? and how can i debug a back ground job ??

Daniel,
To start, BDCs are very out-dated. I would look for a BAPI if you are calling std SAP functionality.
Also - direct updates into std SAP tables is a HUGE "no-no"... I hope that you are updating custom tables only.
Pass that - to debug a b/g job--->
1) Set a breakpoint in your program
2) select the job in SM37
3) enter JDBG into the SAP fastpath of the SM37 screen and press ENTER
This will navigate you into a b/g debug - you can then press the debugger buttons to move to your breakpoint.
Hope that helps.

Back Ground Job not Working

Hi,
I have watched all the threads regarding Back Ground job like SE36 & SE37. I have given a back ground job and its not working.
Its an ABAP Program which is creating an OLEDB Connection to MSACCESS and then retrieving and updating database table. The program is working very fine on foreground but when it is given to back ground job then it shows that the program is running, i mean in delay the time is ticking. But at last it is canceled by the system.
What's the thing i am missing or what should i do here? I have already set my program at high priority.
Thanks.

Hi Atish,
Are you sure that we cannot run in background? Can you please explain me why it cant be done.
Thanks,
Inder.

Mail Link not showing (nor is copyright) in web output

I'm using the flash gallery choice for output to web, and can't get an email address to show up on the screen (nor the copyright information). I've filled in both fields, they just don't seem to have a place on the finished piece.
Laurence Bartone

Actually, I've now tried it on a number of templates for web output, and none of them actually show the text or link for the email link or web address - it's not showing up in the template or final output.
Also, is there a way (not too hard!) to place a 'back' button or a url address somewhere in a template? If I knew the actual text to place, I could >perhaps< copy it in somewhere...
Thanks
Laurence Bartone
Check:
http://bartonephotography.com/Weddings/
That's a link, using the flash gallery - but I'll probably change it soon to a varient on 'blue sky'.

Why do some links not show up on my screen?

Some links or response boxes to be filled in DO NOT Display on my screen. If I know where they are, I can find them when my pointer turns to "hand". The problem doesn't exist on IE (ugh!).

There are many possible reasons for pages not to look right. Have you tried to tips in this article: [[Websites look wrong]]?
If you compare with IE side-by-side and notice that colored panels are missing, check out this article: [[Images or animations do not show]].
Any luck?
If that doesn't help, can you post a URL or two of pages that have this problem and indicate which parts are not visible in your Firefox?

Links not showing in Links palette; InDesign CS3

Specs:
Version CS3
OS: XP Professional
Memory: 2gb
After running several searches I found an almost identical question in this forum, but an answer was not posted, plus they had an older version.
The link text (missing or not) is not showing up in the Links Palette. We have reset Preferences, by going to the actual location on the drive and removing them, forcing ID to recreate them on start up, but no luck. We always "Place" and never "Copy and Paste".
If we "Package", we can see a list of the Links as normal, it's just in the Links Palette where we're having problems.
Thanks for any help.

I'm not sure that's what Thomas is asking. It sounds to me more like he has an empty links palette (where he ought to be seeing links to images) than that all he has placed are text and spreadsheets, and his preference is to embed those.
Since prefs replacement isn't helping, and if I'm correct in my interpretation, I think the next step might be checking the video driver by turning off hardware video acceleration temporarily.
Peter

My Lacie hard drive back up is not showing up and light is flickering

My back up hard drive is not showing up when i plug in the USB to my Macbook Air so won't back up. The light on the hard drive is flickering. CAn you please help?

A: does it show up in disk utility?
B: try a different USB port.
C: If no go, try a different Mac.
D: If still not recognized then its about 90% likely the SATA bridge card inside the USB enclosure is bad....NOT the Hard Drive itself, but the SATA bridge card attached to same.
Is your Lacie a conventional HD or a SSD? (LaCie does NOT make hard drives, internal conventional HD are Seagate inside a LaCie)
If its a conventional HD
A replacement HD enclosure will solve same, ($15 ebay). The Sata card removes from the HD very easily, like LEGOs attached together come apart.
Verify A thru D first before doing anything.
likely bad part pictured below, the SATA card, ... as seen INSIDE a USB external HD

Link not showing hand icon when mouse over

I am creating an image gallery and have thumbnails that open
in a separate window to a larger version of the image.
The links are working, but when you put the mouse over the
image the little hand does not appear to show it is a link, if you
click it works and the image opens, but the hand does not show,
what have I done wrong.

This implies that you have applied the behavior directly to
the <img> tag,
when you should have applied it to an anchor tag surrounding
the <img> tag,
e.g.,
this - <a href="javascript:;"
onclick="whatever"><img src="whatever"...></a>
rather than this - <img onclick="whatever"
src="whatever"...>
You can get this by manually creating it, or by selecting the
image,
removing the behavior, then entering "javascript:;" (without
the quotes) in
the Link field of the Property inspector. This will wrap the
<img> tag with
the anchor. Now select the <a> on the Tag selector, and
apply your
behavior.
As you can see, familiarity with HTML (and CSS) will come in
quite handy
when working with DW.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"PosterP" <[email protected]> wrote in
message
news:g49sdk$gtp$[email protected]..
>I am creating an image gallery and have thumbnails that
open in a separate
> window to a larger version of the image.
>
> The links are working, but when you put the mouse over
the image the
> little
> hand does not appear to show it is a link, if you click
it works and the
> image
> opens, but the hand does not show, what have I done
wrong.
>

Embedded link not showing up in Illustrator

I had a client send me a word document as a pdf which I dropped into Illustrator to make it print ready. When I pulled the file into Illustrator, two of the embedded links, which happened to be the logo of said client, did not show up. The file is in the links panel and shows it as embedded, I can even see the bounding box when I hover over where the logos are supposed to be. However, when I open the file in adobe reader or acrobat, or even preview, those logos show up. Illustrator showed no errors and none of us caught it so it was printed without the logos.
Is there an explanation for this and how can I check for it in the future just in case it happens again?

You may need to get the embedded files from the person who authored the Word doc. and relink them to have them show up correctly. I'm not the biggest expert on Word but it may have something to do with the way the PDF was created from Word. Best way to prevent this from happening again would be to make sure if you have embedded files in a PDF you are opening in Illustrator that you address each one with caution. Select the links, one at a time in the links panel and click the go to link icon in the bottom of the links panel. This will highlight the link and zoom you into its location, if you see nothing, no graphic in the linked graphic area then you most likely need to get these graphics from the Word author and Relink them into the Illustrator file. Other possability would be to find out if there is a preset for PDF creation you could supply to the Word author that allows him/her to create PDF files that work for you.

Background Color on Application tag not showing...

I just recently upgraded to the nightly build version # 4.0.0.10045 and the backgroundColor property on the main application tag is no longer rendering the background color. I noticed a new ApplicationSkin.mxml in the spark skins with the following:

    <s:Rect id="backgroundRect" left="0" right="0" top="0" bottom="0" >
        <s:fill>
            <s:SolidColor color="{getStyle('backgroundColor')}" />
        </s:fill>
    </s:Rect>
However adding a backgroundColor property to the Application tag or in the CSS has not given any results.

Ok it turns out it is not the application tag causing problems, but the halo VBoxes, HBoxes and Viewstacks. It seems I can no longer apply background colors to them at all.
Here's an example:
<mx:VBox id="footerVBox" horizontalAlign="center" verticalGap="-5" paddingBottom="5" paddingTop="0" backgroundColor="0xFF0000" width="600">
     <mx:HBox horizontalGap="1" verticalAlign="middle">
          <mx:Label text="{copyrightSymbol} 2009 SearchIgnite" fontSize="12" color="#003366" />
          <mx:VRule height="12" strokeColor="#003366"/>
          <mx:Label text="{'Version ' + version}" fontSize="12" color="#003366"/>
          <mx:VRule height="12" strokeColor="#003366"/>
          <mx:Label text="Customer Service 888-744-6483" fontSize="12" color="#003366" />
     </mx:HBox>
</mx:VBox>
Is rendering with a white background behind it, obsucring the background color of my application. The backgroundColor style property is not getting applied at all.
Upon rewriting this group as:
<s:Group id="footerVBox" width="100%">
     <s:layout>
          <s:VerticalLayout horizontalAlign="center" paddingBottom="5" paddingTop="5" />
     </s:layout>
     <s:Group>
          <s:layout>
               <s:HorizontalLayout verticalAlign="middle" />
          </s:layout>
         <s:Label text="{copyrightSymbol} 2009 SearchIgnite" fontSize="12" color="#003366" />
         <mx:VRule height="12" strokeColor="#003366"/>
         <s:Label text="{'Version ' + version}" fontSize="12" color="#003366"/>
         <mx:VRule height="12" strokeColor="#003366"/>
         <s:Label text="Customer Service 888-744-6483" fontSize="12" color="#003366" />
</s:Group>
</s:Group>
I am able to get the background color of the app to show through. Again I am using build version 4.0.0.10045 and this was not an issue in the previous builds.

L-Shape Link not showing up

Hi Gurus,
We have hit a road block in our production wrt the L-Shape.
We created a new Direct Link Group and added it to all the Roles and did all the necessary changes even in crmc_ui_profile and nblinks. In QAS system of ours it seems to come up just fine and works perfect.
But in the production system for some reason the link is not showing up at all. The whole new Direct Link Group is invisible. But for some reason for one user you can see that link and its only for that user that you see it. I know that the Design Layer is buffered. Are these L-Shape links also buffered?
Has anyone encountered such an issue? Any suggestion and insights are welcome.
P.S. Since this did not work, I even added one of the links to a Work Center Group. Even that is not visible. By the by, the link takes us to a custom developed component. The T-Link has been defined in the crms_ui_tlink as well.
Thanks!
Amrut

This may be because of Authorization.
Try to give SAP_ALL and SAP_NEW authorization for one user and check. If it is working then take the authorization trace from ST01 Transaction and give missing authorization to users.

Colored back ground link not showing

Similar Messages

Maybe you are looking for