Coloring a Symbol in "Vellum" Theme??

The "Vellum" theme provides a square keyline box at the beginning of a text line - I would like to change its color to Red but can not highlight the object only the following text. Any ideas??

It will probably be buried inside the Keynote application itself.
You can open this by right clicking or command clicking on the Keynote icon in Finder and looking inside the "package".
I would be wary of actually altering the original graphic as it is part of the iWork installation and may cause upgrade problems.
You can always make a modified copy and paste it into place as an Inline object.
Peter

Similar Messages

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

I am having various words highlighted in blue and capitalized with a symbol next to them?

I am having various words highlighted in blue and capitalized with an arrow symbol next to them?? How do I get rid of this? I am also having a lot of antivirus pop ups? I thought I already had anti virus software to prevent this????

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t 'PlistBuddy -c Print' ' function f() { n++;sub(/^/,"^");gsub(/\./,"\\.");gsub(/\+/,"\\+");gsub(/\-/,"\\-");gsub(/\?/,"\\?");print|"sort|uniq";};function g(N,d) {if(n<N) print d};' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n '"${p[50]}"'mod date: %s\n '"${p[50]}"'checksum: %s\n%s\n' '\n ...and %s more line(s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' "${p[52]}"\ ' $0&&!/ /{f()} END{g(10,"^com\.apple\.")} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p;' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36}|apple\.launchctl\.(Aqua|Background|System))$/ { print $3":"$2;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' "${p[52]}"\ ' /\.(component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/{f()} END{g(900,"^/System/")} ' ' /\.dylib$/!d;s/(\.|\+|\-|\?)/\\\1/g;s/^/^/p;' "${p[52]}"\ ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");f();} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]"\.plist\t"c[i];g(500,"Launch");} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/\.(component|mdimporter|plugin|qlgenerator|saver|wdgt)$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :OSBundleRequired "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="N/A";printf("'"${f[4]}"'",$1,$2); } else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|\-4[34])/p' ' BEGIN{FS=":"};{ if($2) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else print $1;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c Print\' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print -print-diagnostics' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Stylesheet Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Bad\ kexts );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Ev "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 1;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 57;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B3 7 7 73;B1&&{ A8 18 26 23;B7 7;B4 0 0 74;C3 23;};A2 18 26 23;B7 7;B4 0 0 74;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 31;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Bookmarks reappear on Firefox startup but not the colorful webpage symbol

I added the add-on 'MultirowBookmarksToolbar'.
Now, when I restart Firefox, the bookmarks all load up and are visible on the multi-rows, however, many of the bookmarked web page colorful little symbols don't appear.

I have corrected this problem by going to: TOOLS - OPTIONS - PRIVACY and then changing the settings.

I am trying to change the color background in the Sports Theme of Imovie 11

I am using the Pre-Set Theme (Sports) and want to change the theme color from blue to green. Any ideas of how to do this?

No unfortunately those themes are baked right into iMovie and not to be altered unfortunately. In a manner of speaking, What you see is ALL that you get. Everybody gets the same color no matter what.

How to mark (psd) Images with the Circle Symbol without duplicating them

I would like to import my layered images in Aperture.
The problem is i would like to further adjust them in photoshop cs3 without creating a duplicate.
Is there a possibility to mark this images with the Circle Symbol (for edited with external editor) or do I really have to open each image than close again, delete the master and then the remaining image with the circle can be opened and further enhanced in Photoshop without duplicating the image.
Another example:
I like to open a psd file within aperture with: edit with Adobe Photoshop CS3.
The Image should open without being duplicated. Then I could drag the layer into another PSD document and close it again.
Right now I would end up with a Master Duplicate which I have to delete afterwards.
I know I could use referenced files and say show in finder but I like managed better,
also:
Show in finder does show you only one image (I like to do that to 5 or 10 images at once).
bc

Like I said if you want to get into the programming business you can modify the aperture database directly but I don't know of an easier way with managed masters. You can always just do your workaround to files that you are actually working on and you only need to do it once.
Sorry there is no answer to easier answer to deal with all of them at the same time. At least none I can think of off the top of my head.
RB
Ps. Lightroom can just open your PSD files but that is an apples and oranges thing. Lightroom is not trying to manage your masters for you in a managed library an ensure that nothing modifies them, if you are ok with that method than referenced files should be ok with you as well, you can always use referenced for your legacy PSDs and use a managed methodology for your new images going forward starting with the source image.

Why are my photos jarbled/color-distorted when I pull them into Photoshop?

DETAILS:
I'm using Photoshop CC 2014.
Photos were captured on my iPhone 5 and captured through Image Capture.
PROBLEM:
I dragged two photos into a Photoshop file. The first one imported fine. The second one came in distorted (see below). It seems to be a corrupted version of the first photo I dragged in, that is underneath it. When I saw the problem, I deleted the corrupted photo layer and tried to drag it in again, and it did the same thing.
Then I realized I really liked the effect it was creating. Every time I would transform (command T) the corrupted layer, it would redistort, with different patterns and colors (see below). I kept doing it, trying to create different patterns.
Eventually, the photo imported correctly, and I couldn't get the issue to reoccur.
QUESTION:
How can I recreate this effect? Is there a way to corrupt/distort the colors like this intentionally?

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

I scanned color document - how can make them smaller by Distiller

Dear friends,
I scanned documents and saved them as pdf format ....and everything was ok....but now i have many documents and my hard disk is full now because i was scanning documents as color not black & white ( that's my fault I must scan document as black & white ).
now i am thinking to use Acrobat Distiller to make documents smaller .
I opened the document and printed it using distiller but the output still big.
how can I make files smaller ....please help me
thank you very much
Al

Don't fret; it's easy to compress files in Acrobat! Just go to Advanced > PDF Optimizer. Tick Images and reduce the compression quality, making sure JPEG has been selected.

My theme has change to brown color, my theme has change to brown color and i want original theme on iphone4 4.3.3

how can i do that to beacome original color? (blue color)
i don't mean wallpaper . I mean the theme from which i download from Cydia.

You won't get help with hacked phones on Apple's official forums. Go to the people who help you hack your phone for assistance.

Replacing Colors with Symbols

Hello,
I have converted an image into a photomosaic aimed at creating a pixelated look
on an image 725 x 725 pixels. The Mosaic is 100 x 100 grid.
I would now like to replace each color in the mosaic with a symbol
can this be achieved, if so how?
thanks in advance

Welcome to the forum.
alby2014 wrote:
- I have converted an image into a photomosaic aimed at creating a pixelated look
- the mosaic is 100 x 100 grid
- replace each color in the mosaic with a symbol
Did you use "Object > Create Object Mosaic" to achieve this or are you speaking of something else?

Changing color scheme on Transitions and Themes

I would like to use the Newscast theme to create an iMovie; however, I CANNOT use the red color scheme for my audience. How do I change the color scheme for the transitions?
thanks in advance for any advise!

sararandazzo8 wrote:
… How do I change the color scheme for the transitions?
short answer: you can't.
long answer: most animations and 'moving' elements within iM are realized with a technology called QUARTZ. those animations are 'hardwired' in iM. You'd need a Developer-tool, tons of expertise and have to ignore the EULA you signed on installation/usage of iMovie, changing these parts of iLife.
I tried to change colors and fonts in some preset Titles - technically possible, but not within 'normal' usage
Make a enhancement suggestion, allowing iM to use plug-ins, add-ons, 'Jam Packs' in future versions of iMovie:
http://www.apple.com/feedback/imovie.html

Set color of logon button using theme

Hi,
In the theme that i'm using as default in my Portal Desktop the buttons are gray, but in the login page the logon button is blue and background color of the is not correct also. After logon the buttons and background are the same of my theme.
Does anyone knows what can be the problem?
Thanks for the help.
Paulo Ruivo

The logon screen is not controlled from the theme. Check out the file umLogonPage.jsp in com.sap.portal.runtime.logon.par
This is the line which controls the button,
<input style="height:3ex;" class="urBtnStd" type="submit" name="<%=SAPMLogonLogic.uidPasswordLogonAction%>" value="<%=logonLocale.get("LOGON")%>">
In SDN there is a doc availble for logon screen customisation "Customizing the Logon User Interface"
Which gives elaborate details
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/customizing the logon user interface of sap enterprise portal 6.0

Table colors disappeared after replacing a theme

Hello,
I have developed a certain table in Web Dynpro with rows in different colors: Problematic rows are painted in red, proper rows are painted in green.
Everything is working OK.
At this point I have replaced the standard theme to a custom one I've created and in this one I don't see the rows being colored at all.
I went to the Complex Elements->Tables section in my theme but I can see all the colors there inside the preview sample table.
What else do I need to check in there?

Anyone.....?

Copyright symbol in Folio Theme

I am trying out the book creation with iPhoto for the first time. Using the folio theme there is the photo number, caption, explanation and then a "© of <my name>" beside every single photo. Is there a way to delete these text fields? I most especially don't need or want the © next to every photo as I am making a book as a gift for my wife.
Any help much appreciated.
cheers,
macitect

I was able to delete the copyright line by just selecting it and hitting delete. Of course you need to do this for every photo individually. Once you delete it, iPhoto puts a box around where the text field is. I presume this box is there to show where the text field is when its empty but it won't show when printed.

Coloring data symbols in scatter graphs

Having created a scatter graph with 10 data points I would like to color each point differently. Does anyone know if you can do this?
The complete data series can be colored, so ALL data points can be formatted but I cannot see how each point can be done individually.
If that is not possible, how else can you notate or label each data point on that scatter graph so that they can be identified?
Many thanks
Mark

We may have a different colors for each serie
but can't have different colors in a single serie.
Yvan KOENIG (VALLAURIS, France) mardi 20 juillet 2010 17:22:21

Coloring a Symbol in "Vellum" Theme??

Similar Messages

Maybe you are looking for