Coloring of specific bars in charts built in Keynote

Working on a presentation in Keynote 2.02. I created a bunch of column charts with gradients applied. In one instance, I have 15 columns and I want 2 of the columns within the same chart, to have a different grandient fill than the other 13. Any clue on how to do this? Thanks in advanced.

Welcome to the discussion boards, geraldho. The bars of a bar chart can't be coloured individually -- the best solution is simply to overlay rectangles on the bars you want to colour differently.
PowerMac G5 Mac OS X (10.4.4)

Similar Messages

Change colors of specific bars

I would like to change the colors used in specific bars of a bar chart. I want to highlight certain bars for illustration, however they are not different groups of data. I just want to manually change the color of a single bar. Is that posible?

There was a simlar question to that where the final solution was to make a second graph that uses a aux column, then make a second table that takes data from the Aux column:
You can then set the limits of both charts so they are the same using the charts inspector. Also set one (or both) chart to a no fill, then supeimpose them by moving one on top of the other like:

Customize colors in horizontal bar in charts OBIEE 10g

Hi All,
I have a chart report which has horizontal bars. I want th change the color of each bar to different colors. I have no condition,any color is fine for me.
How can I achieve it? In Format Chart Data, I haev specified different colors,but it gives only one color for each Horizontal bars.
Thanks,
Krishna

Hi Krishna,
Try chart conditional formatting, if you have year in X axis and Revenue in Y axis, add conditional format for each year. By this you can vary color for each bar.
Regards,
Dpka

Fine-grained control of colors in a bar chart

Hello,
Short version: How do I control the colors of the bars in a bar chart in Keynote, so that each bar, representing a particular entity, retains its color no matter its position relative to the other bars after updating the chart?
Detailed version: I am using iWork '09. In Keynote I have a 3D bar chart showing an indicator for different companies (industry comparison). The companies are sorted in ascending order by revenue, so that the lowest bar (company with smallest revenue) is to the far left and the tallest - to the far right. I update the chart regularly. I have the following problem: each bar, representing a company, is in a particular color. When I update the chart, if the the order of the companies changes, the colors of the bars do not change, so that in the new chart the order of the colors is the same, although some or all of the bars now represent different companies. In other words: if in version 1 company A is in red and comes before company B which is in blue, if in the next version company A comes after company B, I want its bar to still be red. In the current situation, if company A comes after company B its bar will be blue and comapny B's will be red, i.e. red still comes before blue.

I have to give up the beautiful colors of the automatic chart and only use the restricted number of colors from the color well.
There is no restricion in the choice of colour, the colour depth on a Mac has over 16 million to choose from.
Further, the fill type has options for; colour, gradient, image and tint

SSRS- Drill down to sub report of a bar chart on click on a particular color of the bar

Hi,
I have a bar chart which can have many colors on each bar, Now if i click on a bar, i am getting all the data related to that particular bar. Is it possible to click only on a particular color and get related data instead of whole bar?
To be more precise, in the below image if i click on 16/6/2013 bar, i am getting all the data related to the bar, but is it possible to click on red and green colors of the bar separately and get the relevant data? Any help is greatly appreciated.
Kruthi Hegde

Hi Kruthi,
In your case, you can use “Go to report” property to solve the issue.
Suppose we have a dataset (DataSet1) in main report and subreport with following fields: Months, DateTime, Amount. We can according to Months and DateTime fields to display the subreport. Please refer to the steps below:
Subrepot:
Add dataset (DataSet2) in the report with Months field.
Add dataset (DataSet3) in the report with DateTime field.
Add two parameters in the report. Please refer to the following Available Values:
Months:
Dataset: DataSet2
Value field: Months
Label field: Months
DateTime:
Dataset: DataSet2
Value field: DateTime
Label field: DateTime
Add filters in the tablix.
Main report:
Right click the bar chart, select Series Properties.
Click Action in the left pane, select “Go to report” option.
Specify the corresponding report.
Click Add icon to add parameters to run the report:
Name: Months Value: [Months]
Name: DateTime Value: [DateTime]
(Note: If we want subreport display these data which is only relevant with color, we can delete DataTime parameter in the report.)
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Gantt chart- How to change the color of time bars of different versions

Hi All,
My Client wants to see all changes in planning schedule. I made different versions of these changes but he also want to see all these changes in gantt chart and in different colors. I tried to change the color in planning board assistant but in this screen (CJ27/ CJ2B). we cannot view all versions together. And if I use CN41, there I cannot change the colors of time bars.
Secondly, we can change colors of times bars of basic dates, forecast dates and actual dates but there is no provision to change the colors of schedule bars of different project versions. Kindly reply-
1. How to see all project versions in CJ27 or How to customise bar chart in cn41 or if we change in SPRO, then how to change graphic profile in project info profile
2. How to change colors of different time bars of different versions.
3. How to mention these legends (meaning of each color in chart) at footer of gantt chart (in print outs)
Please Help.
Thanks & Regards
Dinesh Chauhan

Thanks,
actually I've created new project planning board profile where planning board assistant is customized but unable to use this profile in CN41. we can change PS info profile in CN41 and that;s why I thought that planning board profile may be assigned somewhere in PS info profile so that changes in planning board assistant will be applied in CN41 through PS info profile. Graphic profile is too complex to understand and not sure if it will help to get colored time bars of projct versions in gantt chart. Still not clear.
Secondly not able to see all versions (snap shots) in gantt chart with different colors of time bars.
I mean planning board screen can be customized but we cannt see different versions here which are possible in CN41, but we cannt customize the gantt chart (time bars) in CN41. Pls help.
Thx & Regards
Dinesh Chauhan

Crystal Report Version 11.5.8.826 - Color Sorting - Stacked Bar Chart Issue

Hi All,
I have issue on sorting the color on stacked bar chart.
Below steps are not reflect the color sorting.
1. Right click on chart area in the report
2. Select chart expert
3. Go to Color Highlight tab
4. In the item list, change the sequence of color
Is there any way to sort the color on stacked bar chart?
Please advise, thank you.
Regards, Sumardi

hi,
You can right click on each bar individually,
Format Series Riser -> Fill -> Foreground Color.
This will apply the required colors.
Also, if you have any color standards, try to create a sample report with this kind of Chart and specify the colors individually.
Right Click the chart -> Save as Template.
In future, if any other reports have Stacked Bar Chart with same color standards, you can directly re-use this template.
Regards,
Vamsee

How to define specific color for specific data in WebI?

Hi everybody,
I wonder how I could connect data shown in e.g. a vertical stacked bar chart to a specific color. The assignment of color in a chart is done by Webi automatically after pulling a a variable to a chart. Later on it is possible to change to color via the color palette. But how can I define a specific color for specific values of an attribute? (E.g. calue is Chicago -> color is blue; value is NY -> color is red.. etc ) Is it possible?
Does anybody know the trick?
Thanks in advance!

Please refer the below links along similar lines .
[http://www.dagira.com/2007/07/22/alerters-on-charts/]
[http://www.dagira.com/2007/07/31/alerters-on-charts-part-ii/]
Regards,
Bilahari M

10g Graphs - How to customize the default color of a Bar Graph

Hi,
I've posted this thread in Reports section, have received no reply yet. Maybe no one has ever tried this before!!
I am porting a couple of 6i OGD's to 10g graphics.
Basically I am invoking reports from a form. The reports contains embedded Graph.
Here comes the tricky part.
I have a couple of Graphs in 6i that display each bar of a bar graph in different color.
Example:
Value       Bar Color
Critical     Red
Major       Orange
Minor       Yellow
None       GrayQ) I want to know how to set the color of each bar of a bar graph based on the value it takes. i,e If it's critical the bar should be displayed in red. If it's major, the bar should be displayed in orange.
I added conditional formatting in 10g Graph, and this is the trigger that was created.
function CT_1FormatTrigger return boolean is
begin
-- Automatically Generated from Reports Builder.
if (:f19 > -1)
then
    srw.set_foreground_border_color('yellow');
    srw.set_border_pattern('solid');
    srw.set_foreground_fill_color('yellow');
    srw.set_fill_pattern('solid');
end if;
-- Automatically Generated from Reports Builder.
if (:f20 > -1)
then
    srw.set_foreground_border_color('red');
    srw.set_border_pattern('solid');
    srw.set_foreground_fill_color('red');
    srw.set_fill_pattern('solid');
end if;
return (TRUE);
end;When I try to invoke the above report from the form, I get the error: FRM-41214: Unable to run report.
If I remove conditional formatting, I am able to invoke the report from the form with the default color in the embedded graph.
Hopefully someone has ideas on this!
Thanks

Why don't you use the build-in charting capability of reports 10g instead? There is FormsGraph.jar implementation for forms but that might not have the flexibility of what 6i graphs has/had and not "officially" supported - not like the reports 10g charting capability (which is built in and can be customized by editing the related xml files (if necessary). Note: FormsGraph.jar has it's own limitations

Change colors CNE5 char bar

Hi PS experts, i have a consultant. In the transaction CNE5, when I visualize the bar chart shows me some colors to actual dates. Where can configure to change the color of these bars?
please help me
Greats
Augusto, Lima Peru

You can use initWithImage or initWithCustomView to get the look you want.

Find color of specific pixels

I'm working with grayscale images and I need to find average darkness of specific regions. The areas are all perfectly circular.
I can't figure out how to determine the color of specific pixels in an image. Does anyone know of a way? I need to process millions of pixels so I would prefer something that can do this relatively quickly. The images are all grayscale, so I only really need to know the darkness of the pixel.
I don't suppose there is any built-in way of doing this that would be more efficient than my computing the average manually?

Ok, it seems that I can use a BufferedImage to acquire the colors of specific pixels. I found a couple methords that seem relavent:
public int getRGB(int x, int y)
public int[] getRGB(int startX, int startY, int w, int h, int[] rgbArray, int offset, int scansize)
The first is pretty staight forward, but I am interested in performance, and the second sounds like it could be better.
I'm not sure about the meaning of the the scansize argument:
scansize - scanline stride for the rgbArray
Am I right in thinking that rgbArray is defined that the value in the first index (after offset) is the upper left corner, the next is the pixel directly to the right of it. When the index become equal to scanline, you are now on the next row of pixels below.
This doesn't make sense to me because it would defeat the purpose of having 'w' (the width).
Now, the other question is whether using the second methord will actually improve performance...I need circular regions, so using a rectangle will waste data. Would I be better off using getRGB(int x, int y)? How about creating a subclass of BufferedImage designed to extract the colors in a circular manner. Actually, is using a BufferedImage the best approach even?

To color a specific row in a Table UI element

Hello Experts,
We have a requirement to highlight (with distinguish color) a specific row of a table UI based on column data.
Suppose we have a table with 5 column and 10 row, now if the data on 5th column greater than some XYZ value then we need to highlight the specific row with a different color.
Can anyone please help me to achieve this requirement?
Thanks & Regards,
Sambaran Chakraborty

Hi,
In your outline, I am missing quite a few prerequisites which I mentioned (not sure if you have implemented them already)
your sub node, does it have singleton=false, cardinality 1..1 and selection cardinality 1..1?
The attribute of type TableCellDesign in that sub node, does it have the calculated property to true?
If you've bound each table column's cellDesign property to this calculated attribute, you just put some code in the generated generated get<SubNode><CalcAttribute> method to set the color
For instance by just entering the line
return WDTableCellDesign.CRITICALVALUE_LIGHT
in that method will render each linked cell to that color
Not sure what else I can say to explain this, there's not much to code...

How to change the color of specific row in ALV tree

Hi,
I m using method set_table_for_first_display of a class CL_GUI_ALV_TREE.
The req is to change the color of specific row. Now can anybody tell me how to change the color of ALV tree. As in ALV tree and in this method 'set_table_for_first_display', there is no parameter IS_Layout.
Pls suggest...

hi
hope this code will help you.
Reward if help.
REPORT zsharad_test1.
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) TYPE c, "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-datatype = 'CURR'.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
APPEND fieldcatalog TO fieldcatalog.
CLEAR fieldcatalog.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
DATA: ld_color(1) TYPE c.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekko.
*Populate field with color attributes
LOOP AT it_ekko INTO wa_ekko.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
IF ld_color = 8.
ld_color = 1.
ENDIF.
CONCATENATE 'C' ld_color '10' INTO wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
MODIFY it_ekko FROM wa_ekko.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL

Error bars in Charts?

Hello everyone- Would anyone know how to create error bars in charts in Keynote 3? I can't seem to find an answer anywhere to this question. Many thanks to future replies...
Powerbook G4 Mac OS X (10.4.6)

You can't get Keynote charts to generate error bars, or to use error bar information from some other source -- that functionality just isn't available in natively-produced Keynote charts.
However, charts that are copied from Excel and pasted into Keynote look quite good. You won't get all the cool textures, or 3D effects that you can with Keynote charts (and not having the latter is a good thing in my book). But, if you set the background of the chart to "None" from within Excel, the chart background will be transparent in Keynote, and you can do things like apply shadows that will conform to the chart elements. Any formatting that you do in Excel should be respected by Keynote.

Need help in Line bar combo chart - line is not prominent in dashboard

Hi All,
I face an issue where the line in a line bar combo chart is not prominent in Dashbords.
lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness. But this scenario does not happen always. if i scroll down or up the browser(here i am using IE8) some of the reports displays line in the charts and some does not display the line. when i click on the report then the line will be displayed.
please suggest whether this is a browser issue ror something to deal with OBIEE itself.
Thanks in advance.

Hi,
It's a bug in obiee11g. kindly download the patch file from My Oracle Support and delpoye it
OBIEE 11g: Line Bar Combo , With Stacked Chart , The Bar Width Gets Affected [ID 1369493.1]
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Symptoms
When the chart type is changed from Standard or Default line-bar to Stacked line-bar chart, the bars are reducing their width.
Line-bar should keep the width of the previous bars.
However, when vertical Bar is changed to stacked vertical, the bar width remains the
same. But when a regular Line-Bar is changed to stacked vertical, the width
changes (reduces, in this case it becomes half the original width)
Cause
For dual Y stacked bar graph, the bar width was half of the regular bar width
because the series assigned to Y2 was given the half of the space also. This is not needed if the marker type for Y2 is not bar.
The following bugs have been opened to handle this issue
Reference Bug:
Bug 12931660 - line bar combo with stacked chart changes its width
BUG:12931660 - LINE BAR COMBO WITH STACKED CHART CHANGES ITS WIDTH
BUG:12947990 - BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
Bug Ref:
e.x: applying patch file refer the below file
http://obieeelegant.blogspot.com/2011/11/how-to-apply-patches-using-opatch.html
Thanks
Deva

Coloring of specific bars in charts built in Keynote

Similar Messages

Maybe you are looking for