Colorista II showing red render bar in PP CC 2014

I am working a lot with the plugin Colorista II from Red Giant Software. I am using the latest version of PP CC, Nvidia and the plugin. Graphic card is GTX 970.
Everytime I am tweaking with the plugin the render bar turn red. That means no GPU acceleration? From my system or generally the plugin?

hmm shame, that's a mislead in my opinion then. Color correction shall always work that way.
Thanks for reply.

Similar Messages

Getting red render bar when editing HD multiclips

I'm editing a multiclip music video in Final Cut Pro 6.0.3. The sequence setting matches the size and frame rate of the footage, which is 1920 x 1080, 23.98 fps, using Apple ProRes 422 (HQ).
I have my multiclips all synched and when I put them in to the canvas to begin editing, I get the dreaded red render bar. I have never had this issue before when editing in SD. When I have "Unlimited RealTime" checked I get the yellow/orange bar.
Any advice on how to make this easier and flow faster?? My computer keeps crashing.
and I'm running MacOSX 10.5.2 on a Dual 2.5 GHz G5 with 1.5 GB DDR SDRAM.
Thanks in advance!

2 or 2.5 gigs of ram would help (IIRC, 2.5 is all FCP will utilitze).
We just had a thread about this issue on an iMac. You might want to review it...
http://discussions.apple.com/message.jspa?messageID=9091740#9091740
Where is your media stored and how many streams in your multiclip. How is the media connected...FW400/800/eSata/RAID (internal/external)?
Increased ram may help, but I'm inclined to think you could be maxing out your drive throughput.

PP CS5 Wants to Render all my AVCHD (MTS Files) - RED RENDER BAR

Help Please,
I have a Panasonic AF100 and shooting in 1920 x 1080 25P (Australia)
When I create a new project with same settings (AVCHD, 1920 x 1080 25 Frames Per Second) and import footage (MTS Files) the entire sequence has a RED bar above each clip. I expected the footage to have Green or Yellow bars unless I apply an effect or transition??
Having to render EVERY clip in my sequence is driving me mad, I have not even applied any effects and just to watch, I need to render every clip..
I am using a Mac 27", 3.2 GHZ, Intel Core i3, 4GB Memory 1333 Mhz DDR3...
Help please, anyone??
thanks in advance

Have you tried this (CS5):
How do I choose the right sequence settings?
http://www.video2brain.com/en/lessons/how-do-i-choose-the-right-sequence-settings
Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

Render bar | yellow | red | green

If i put a new clip to my sequence it shows me a yellow render bar which actually means, i should regive it without bucking or any problems. But even if i put effects on that clip, or an adjusment layer, the render bar wont get red. And if i render the yellow one, with the full effects on the clip, its not able to play it without bucking. So first i wont get any red render bars, secondly even the yellow is not playing without bucking

http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html
Can you share your computer system specs, Premiere version, footage source format? Do you have GPU acceleration enabled? There are many factors affecting playback smoothness. Does the sequence preset match the footage? Mismatched frame rates are problematic for instance.
Thanks
Jeff Pulera
Safe Harbor Computers

My iphone 4s not turnong on...pluged the charger display shows red battery sts bar but after holding power and home button it doesnt reboot:(

Hi,,
Read post on this but tried holding power and home button the screen balckens out and then when pressed power button the display show red battery sts bar...need help as not used my gadget for the past two days and i m feeling lonely...pls pls reply to my mail id [email protected]
pls pls

What on earth do you mean by shattered? Can you post a picture?
It's always possible that the connector was damaged but not to the point that chargers wouldn't work. With continued use, the damage got worse until the connector could no longer feed electricity into the phone.
It sounds to me like you need to get your phone replaced but only the folks at an Apple store can say for sure.
~Lyssa

Riddle me this-. Orange Render bar for some clips

I hope my system isn't getting tired and old but I have never had a project where all the clips needs to be rendered. No effects applied or anything. I converted these clips to Apple Pro Res(LT) and I still need to render. When I convert my RED footage, it works fine. But not the MVI files. See picture on this link. The files have same codec, one needs to render but the other doesn't!
http://www.redmoonlight.com/PictsOnWeb/OrangeRender.png
Thanks for you time or any solution you can give.
Things I did: Trash prefs, restart, video scope closed

The orange render bar-
"Indicates effects that exceed your computer’s real-time playback capabilities but are enabled anyway because Unlimited RT is selected in the RT pop-up menu in the Timeline. Unlimited real-time playback lets you play more effects but increases the chances that your sequence will drop frames during playback. This mode is useful for getting a real-time preview of complex effects compositions." - form the manual.
I interpet that it mean it will playback withourt requiring rendering until you apply an effect.
One of your clips is set to "maximum" quality with a higher bitirate than the one set to "Normal" quality. Not sure if that is causeing it.
MtD

Yellow render bar in Premiere Pro CS6

hey there,
quick specs:
HP Z820, 64GB RAM, NVidia quadro 6000 (alongside with a BlackMagic 3D extreme for monitoring), ext. SAS-RAID, Windows 7 64bit, Adobe PP CS6.
the issue is quite simple from the outside:
any codec i slam into a new sequence gives me yellow (render) bars.
doesn't matter if i customize the sequence or right click "new sequence from clip" (which i assume fits my sequence settings to my clip settings)
the only codec that doesn't give me yellow bars is mpeg2. (really..?!)
to check i turned the CUDA engine OFF - red bars immidiately.
and even with yellow bars (which PP should be able to play back at least i get the choppiest playback sometimes)..
but as you see it shouldn't be a hardware problem - so what am i doing wrong or didn't i get the idea of creating sequences?
any suggestion appreciated.
s.

Harm Millaard wrote:
If the codec you use is not supported in a preset, you get the yellow bar. So what? If it plays fine, then there is nothing to worry about. With AVCHD 1080p/50 and 5.1 AC3 sound you get a yellow bar, so what? It plays fine.
hey harm,
"so what?" is not really a term that i often use. when i encounter a problem, i try to fix it or at least push as far as i can push to get the optimum under the given circumstances. "works anyway" doesn't really cut it for me.
i want to understand why there's the need to render despite the fact
- that all my hardware and software is supposed to eliminate exactly this
- that other companies solved this problem years ago
- that adobe promotes a product that should do the job, but obviously doesn't
and it actually does not playback fine. sometimes (=usually) the playback is choppy, sometimes the playhead jumps back to start without any reason and a few other problems i came across.
i understand that adobe PP is not in the game as long as AVID is for example, but they claim to have a professional product (at least the name suggests it but as far as i am concerned if you really put PP to the test it tends to bend and sometimes to break.
as much as i love dynamic link (main purchase reason) - i just can not run sensitive projects on it. or, before i do i need to understand why these things happen.
you totally don't have to but i hope you understand my position.
s.

Vanishing Render Bar

Hi,
I'm having an issue where the render bar in Premiere Pro CS5.5(latest version) vanishes. Upon loading the project the render bar appears as normal, red, green and yellow bars. But when I try to render a portion of the sequence Premiere Pro begins to render then stops as if it has completed the rendering. This also results in the render bar vanishing.(see pic below) After this Premiere behaves as if the entire project is rendered. Pressing enter or trying to render the entire work area causes Premiere to immediately try and play the sequnce which is obviously choppy due to unrendered effects. I've tried removing all my render files manually and via the Premiere Pro interface, this does not work. I've also tried creating a blank project and importing the sequence I need, this does not work either.
Any help would be greatly appreciated. Thanks

I had the same problem. It first occured when the project settings didn't match the footage I was using. So be sure to use the right project setting for your sequences.
I have just tested it by setting the right project settings for the footage. So perhaps you should check this out.
I am not completely sure, if I found the reason for this bug with the vanishing render bar, but you can give it a try.
Greeting
Nicolas
Message was edited by: Terrador89

I have no render bar?

Hey everyone!
So I'm having quite a bad problem with Premiere Pro CS5. Sometimes when I preview the video for a project in progress, it lags a fair bit. I usually fix this by rendering the work area. But for this particular project, it won't do anything. When I tell it to render work area, it just plays the video. Also, I don't have a red, yellow or green render bar. It's just gray, as if it isn't there. What could be causing this? Can anyone help me? :c
Thanks for reading my post!

I fixed it. The problem was the frames per second in the source video. For some reason, there would be no render bar for videos with 30 frames per second. I converted the videos to 25 frames per second and the render bar came back. Changing the sequence settings to 25 frames per second also fixed the problem. Thanks for the help anyway!

App for audio recording on ipad that doesn't have the red status bar.

I need an app that still records audio but doesn't have the red status bar that shows I'm still recording when I exit the app. Does it exist? I have heard apple apps require the red status bar to be there.

You need to have the capability to export the presentation in a format your teacher can use. Ask your teacher what format she wants the presentation in. If she wants PDF then you have to send her a PDF file. If she wants something else send her the presentation in that format.
Be warned that not all apps supporting opening presentations preserve or support all layut and formatting. The best approach to ensure your presentation looks as you intended when she opens it is to write it in the same app she will be viewing it.
It is not unreasonable for the teacher to specify a format/application. Otherwise a teacher with 100 students could find herself having to deal with multiple apps, formats, standards, layouts, being sent to her.

My computer turned on and showed a loading bar at the bottom, then that bar disappeared and the loading wheel appeared under the apple icon, what do I do?

My computer turned on and showed a loading bar at the bottom, then that bar disappeared and the loading wheel appeared under the apple icon, what do I do?

It is a Mac OS X.
We still don't know your model--OSX is the operating system, not the hardware model. Please do "About this Mac" from your Apple menu to see a window like this:
Please tell us what your computer shows for the contents of the two lines I've indicated with red arrows. The processor type will at least tell us to which of the four basic iMac families yours belongs. That's a start and can help you avoid getting advice that is not appropriate to your Mac model.

Half a screen of red hash bars

I have a new Apple TV set to 1080i on a proview 19 inch wide screen TV after using the Apple Tv for about four hours I get red hash bars about one inch long with a row of bars then a black space and more bars. This covers the bottom half of the screen with the menu and puts up or flashes the bars when view a slide show or a video. Any ideas as to the cause and a solution.

McQu,
You can place the Apple TV into standby mode by holding down the Play/Pause button for five seconds. When you hold down the Play/Pause button for five seconds, Apple TV goes into standby mode (display dims and hard drive spins down). Pressing any button on the remote while in standby mode wakes Apple TV.
In regards to the video problem, I suggest reviewing knowledge base article http://docs.info.apple.com/article.html?artnum=305175 to see if it may offer other steps to help you with.
Regards,
Chris

My phone will not charge when plugged in. It doesn't show the charge bar as green

My phone will not charge when plugged in. It doesn't show the charge bar as green

Hello alleyfun
For issues with your iPhone not charging, check out the troubleshooting below to see if you can get it sorted out and working again.
iPod Displays a Red "X" Icon
http://support.apple.com/kb/TS1463
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Regards,
-Norm G.

Can I show a color bar instead of a color bullet in iCal Monthly view for all my events in all calendars?

In the Monthly view of iCal the only events that show a color bar in the event is the Birthday Calendar. All other events in all my other calendars only show a color bullet next to the event (unless I click on that event which then shows as a color bar). I would like to know if it is possible for all the calendar events to have a color bar in the monthly view instead of just that tiny color bullet.

Greetings Judith,
Before making any attempts at deleting calendar data, backup what you have just in case:
Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
iCal has an automated function located in iCal > Preferences > Advanced > Delete events "X" days after they have passed. By typing in a value for days you can tell iCal to delete all events before that time frame.
Example:
Today is 4-16-2012.
If I wanted to delete all events prior to 1 year ago (4-16-2011) I would type in "365" for the number of days.
Once you type in the number of days you want kept in iCal, close the preferences and then quit iCal.
Re-open iCal and check to see if the events are gone. If not you may want to leave it open for several minutes and then quit again.
Once the events are removed go back to iCal > Preferences > Advanced > Delete events "X" days after they have passed and make sure the check mark is removed to prevent future deletion.
Hope that helps.

Why is it that when I set the preference to always show the tab bar, it refuses to stay checked after I quit Firefox and restart it?

Using Mac OSX10.6.7 and FF 4.0.1, I'm having a problem with the preference to always show the tab bar. I want it to always show. I check this in the Preferences under the "tab" window, and everything is fine until I quit FF and when I restart FF the tab bar is gone again. I go into preferences, and that option is now unchecked. How can I fix this so that my preference is saved?

That hasn't helped the last ten times I tried. I posted before. I deleted the preferences file, I tried changing the preferences file, I went into about:config and changed the autoHide preference there. No dice. Firefox is not saving my preference for that one thing.

Colorista II showing red render bar in PP CC 2014

Similar Messages

Maybe you are looking for