Colorlaserjet 1518ni printing misalignment on right side of page

Cyan printing is skewed on right side of page

Hi Mmmmmmk, 
Calibrate the printer
Follow these steps to calibrate the product.
Open ToolboxFX .
Windows XP: Click Start, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
Windows Vista: Click the Windows icon, click All Programs , click HP , click your product, and then click HP Color LaserJet CP1510 Series ToolboxFX .
Click the Device Settings folder, and then click the Print Quality page.
In the Color Calibration area, select the Calibrate Now check box.
Click Apply to calibrate the product.
NOTE:Calibration might take two to three minutes. Do not turn the product off during calibration.
When calibration ends, try printing again.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Print booklet truncates right side of page in Snow Leopard

    I'm trying to upgrade to Snow Leopard, but my InDesign booklets clip the right side of a spread at 8-1/2 inches. I'm using an 8-1/2 x 11 paper size, landscape, with InDesign pages 8-1/2" tall and 5-1/2" wide.  The booklets print fine in system 10.5.
    I can print regular landscape pages fine. It's just the Print Booklet output. The Preview shows it as being correct.
    I thought it was my 10 year old Laserjet, but I just installed a new Laserjet and it has the same problem.
    I thought it was a problem with InDesign CS3, but I just downloaded a trial of CS5 and it has the same problem.

    Hi writingnorth,
    Is that the right hand side of the page after removing it from the printer?
    Is the text on that side missing or is it compressed? 
    Does the printer show any error messages?
    Also, please try the printhead clean to see what happens.
    I was an HP employee.
    Please mark the post that solves your problem as "Accepted Solution"

  • Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

    Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

    All web pages? Or just some? Example of a page where that happens?
    Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
    If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

  • Printout are printed to the right side of the paper

    Printout are printed to the right side of the paper
    all other settings are ok but the text is printed too much to the right side

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

    I have a HP Officejet Pro 8500A.   I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded.    The paper is 5X7 when folded, 10X7 laid flat.

    shgilljx,
    Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.  
    Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
    To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
    Text template: The text will be printed on number 2.  That means your wording must be within the bottom half of the page.
    Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
    Print the text template. Insert side #3 into the printer. The text should print on side #2.
    Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
    When folded, all should be correct, if I did it right.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

    laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment.  after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page.  the text is straight across left to right then starts to waver and then then stops altogether.  i tried a different black toner cartidge and the problem remains.

    > so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black.   Ok its not the controller. > Still prints all black.   Ok its not the fuser. >  its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there?  Formatter board hasnt been mentioned.  Something is sending a command to the printer that is telling it to open up the doors and charge the entire page.  Normally the laser is responsible for charging the media.  As the media passes over the toner doors it atracts toner particles.  Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe?   Perhaps but not likely.  If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
    You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer.  http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors.  Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.     

  • Red ticks down right side of page

    Hi I am getting red ticks printing down the right side of the page. Nothing I can find so far has gotten rid of it. Still under warrantee but no support #'s are offered. Any one have any ideas? It aslo keeps telling me it needs papaer when there is plenty.

    Hello elliegilles,
    Welcome to the HP Support Forums!
    Have you just changed a toner in the printer and now the issue is present? I suggest the steps offered here: Troubleshooting Print Quality Issues, mainly the align and cleaning.
    Also, would it be possible to upload a scanned image so I can see these red marks?
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Button at right side of page.

    I want to add a button at Top right side of Page. I want to go with Page Button because they have behaviour to add top and bottom of Page.
    I dont know why Horizontal alignment property for submit button is not working .
    Thanks ,Avaneesh

    put this button into rowLayout region.
    and then use spacer item of this region to aligen this button

  • M1319F MFP printing errors - line on right side of page

    I've had HP LaserJet M1319f MFP about 1.5 yrs.   Last week, it began putting a page-length, thin line on right side of every copy. Line is slanted, about 1/4" from the side, and gradually becoming 1/2" from the side at the bottom of an 8 1/2 x 11 pg.  I ran pre-moistened laser printer cleaning paper through, same line on the cleaning paper.  I cleaned the scanner glass inside.  I removed the brand-new genuine HP laser toner cartridge,I cleaned it, reinserted the cartridge, made a copy, same line appeared on paper.  I removed the cartridge and replaced with a new cartridge.  I made a copy, same thin line appeared on copy.  This happens with copies only, not with scans or printouts. 

    What browser are you using? Try downloading a PDF if one is available, or try printing from XCode's Deveoper Documentation window.

  • Emails print off yhe right side of the page and I lose part of the message.

    In Safari emails run off right side of the page when printing.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Hp printer cuts off right side of paper

    Hello,
    I am new to this but I have a problem that needs to be answered pretty quickly please, when I try to print out an email the right side of the email gets cut off, I checked the printer setting and even the preferences but everything is alright, nothing wrong there, but every time I print I happens. Also when I go to print out a picture the picture turns out yellow, please I tried everything I could think of.
    This question was solved.
    View Solution.

    Hi - Can you provide the model of printer you're using?  That will help determine what steps to take to troubleshoot.  Typically though, when the print out is being clipped or cut off, it has to do with a paper size mismatch between the printer driver software and the settings in the software you're using (i.e. MS Word).  Make sure that the paper size settings in the sw (typically under page setup) match those of the printer (typically under printer setup).
    As for the color issue, the first step will be to run a self test page on the printer to determine whether it is an issue with the ink cartridges.  How to run the test page from the printer is dependant on the printer model.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • HP Envy 4500 cuts off right side of page

    When I print a Word 2010 document, the right side of the page is cut off.

    Hello Yonniehere,
    Welcome to the HP Forums.
    I see that you are having an issue with the printer cutting off the right side of the page.
    Does this only happen when printing in Word or does it happen with other programs? 
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Printing on the both sides of page

    Is there any way I can print through Java on the both sides of page? ( I mean duplex way).
    I have pdf document generated through java and I have this requirement to print some of the docs on both sides of page. Could anybody help please.

    you need to check the hardware api and send the correct command to the printer

  • How to print smartform on both side of pages.

    Hi,
    I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
    Thanks in advance.
    Abhishek Pandey.

    Hi Abhishek,
    In PAGE node u have Output Options Tab.
    In Output Options U can find the field Print Mode
    There u need to give the D.
    Default: No change of print mode
    S Begin new page in SIMPLEX mode (single-sided)
    D Begin new page in DUPLEX mode (double-sided)
    T Begin new page in TUMBLE DUPLEX mode (double-sided)
       DUPLEX:
         The current print mode is set to DUPLEX (double-sided print, long-edge
         binding) and a new page is started. A form page defined with DUPLEX is
         always printed on the front of the page, never on the back of the page.
         If the next form page contains the attribute value DEFAULT, it is output
         on the back of the page.
    Best regards,
    raam

  • Printing Docs - how to get rid of 3 inch wasted space on right side of page

    I tried to print out : Communicating With Objects
    http://developer.apple.com/mac/library/documentation/Cocoa/Conceptual/CocoaFunda mentals/CommunicatingWithObjects/CommunicateWithObjects.html
    After trying several different settings and printed only the first page until I got the print more or less the way I wanted it, however...
    I have a standard HP Color Laserjet 2600n, looked at all the printing preferences, and all four margins are set at (.25 inch), yet when the pages print out there are about 2.5 inches of wasted space on the left side. The space is there for the Table of Contents, but there is nothing printed there, the space is blank.
    So I clicked on the Table of Contents header, so the TOC became hidden and the window only contained the text and images, then when I tried to print, I found that now there were about 3 inches of white space on each page on the right hand side. This is somewhere around a 40% waste in paper, trees, etc.
    One would think that expensive as printing is, there would be a way to save paper by optimizing coverage on each page as much as possible.
    Another curious thing is that the size of the text on the screen is easy to read at Safari normal (default) settings, yet when the first page is printed the text is really small.
    In order to get the size of the print on the paper to be easily readable, I had to click on the large [a][A] at the top of the Safari window twice (+ 2 sizes). The text on the window was fairly large, but the print became easy to read. There was still an excessive amount of wasted space, which just goes against the grain...
    Does anybody have a clue how to get rid of all the wasted space on each page ? There has to a simple way, this is 2010 and we've been doing this for 25+ years now.
    I am sure it is something simple that I am overlooking ? I'd be grateful for any help.
    Thank You,
    Bill Hernandez
    Plano, Texas

    What browser are you using? Try downloading a PDF if one is available, or try printing from XCode's Deveoper Documentation window.

Maybe you are looking for

  • Convert planned order to purchase order directly

    HELLO GURUS how can i convert planned order directly to purchase order and avoid converting it to purchase requisition? what is the steps can to make it from IMG?

  • Dynamic LOV problem

    I have an application where a person gets an ID code and then fills out many questionnaires, which I'm building using Portal forms. I have a table that tracks what questionnaire has been filled out by filling in a field of the data the questionnaire

  • Binding Vars to ViewObjectImpl

    All, I have create a ViewObjectImpl object following the tutorials to Using Programmatic View Objects for Alternative Data Sources. All went well and the class is complete. In the retrieveRefCursor method, I need to extract the bind params to call my

  • Xp_cmdshell giving error

    HI All, I was trying to get the list of all the files in the folder,am getting an error saying " '\\file01\EDW\Perf\' is not recognized as an internal or external command, Please help declare @files table (ID int IDENTITY, FileName varchar(200)) inse

  • Computer freezes every time i try to copy single song from a cd

    my computer freezes every time i try to copy even a single song from a cd onto itunes. I've reinstalled itunes and still have the same problem. i read somewhere that you shouldn't have 'third party extensions' but don't know what what means. Can some