Colors and fonts different on 2 different macs,same project file and assets

my customer created a project in DVDSP on their Mac, I'm not sure the specs of the computer, but they do not have a dual-layer burner, so they gave me the project file along with all of the relevant media on an external firewire drive. I hooked up the drive to my Mac, opened up the project file, everything seemed to have linked up. After checking all of the buttons in simulator mode, I proceeded to do a "Build" successfully. Next I chose the layer break point, luckily there was one as an option, and did the Format/Burn. I gave the disk to the customer and they say that the colors are way off, and even some of the fonts. Now that the customer has the drive back, I asked them to do the "Build" on their computer and check the newly created Video TS folder in Mac's DVD player, they did so, and everything is now "good". I can kind of understand why fonts might be a problem, but why the colors? thanks for any help!

one reason why this happens is when the colour management settings in Colour Sync and the display profile you are using are different to your clients

Similar Messages

Can use different sequence settings on the same project file ?

I have 2 camcorders now, one is a AVCHD and the other is HDV tape.
QUESTION 1:
As the former is 1920 x 1080 and HDV is 1440 x 1080, can I use all the clips of 1920 x 1080 in sequence 1 and all the clips of 1440 x 1080 in sequence 2 (both sequence 1 & sequence 2 are in the same .fcp project file) ?
QUESTION 2:
I often seen Tom saying the settings in Easy setup and be the same settings in the sequence settings.
If in Easy Setup, I select AVCHD PAL - 1920 x 1080i50, how do I select the same for sequence settings ?
Thanks

1. A qualified yes because I don't know what sequence 1 and 2 are.
2. The easy setup is your sequence setting. Make a new sequence and it will be in that format.
If you want to mix the media from those it cameras it would probably be better if you can switch the AVCHD camera to shoot 1440x1080; most can do that, and it would then match the media from the HDV camera.

HT1373 So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/i

So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/ipod

Download them to the computer to which the iPod is synced, re-sync.
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?

mpcsouza wrote:
How do I set two different beat measures in the same project, e.g. 2/4 and 3/4?
you can't, GB is restricted to a single time signature per project
however, the time sig is really more cosmetic, it doesn't affect the way the project plays back, so you could set the project to 2/4 when working on the 2/4 parts, and 3/4 when working on the 3/4 parts

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

I have an IPone 4 and i downloads pictures drom my mac on my phone and now they are on my phone and i want to delete them but it wont let me. how do i delete them?

i have an IPone 4 and i downloads pictures drom my mac on my phone and now they are on my phone and i want to delete them but it wont let me. how do i delete them?

Hi,
Photos synced from your computer can't be deleted directly on your iPhone. You'll need to connect your device to iTunes and remove the pictures by going in the Photos tab on your device's settings.
Franklin

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

I have a MacBook Pro (purchased in 2011) with OS X Lion 10.7.4. I'm using Microsoft Office 2011 and cannot open older PowerPoint Files (non .pptx). It will always open the same .pptx file and then the machine hangs up and just keeps spinning.

Thank you - that all makes sense. It is, indeed, exactly what I did when I upgraded.
I'm also writing this on the machine that crashed a few minutes ago (I posted the crash in another thread). I got back with a 'safe boot' - as I have done a few times before.
I've also de-installed little snitch (and then done a safe-boot & then re-boot ) since that seemed involved. I de-installed Adobe flash, since that seemed to be a problem - I then re-installed the later, apparently fixed, flash. The most recent crashes don't seeme to have a problem with flash any more.
I've posted the various ( generally different ) crashes. I also posted a summary of the similar lines that turn up in most of the crashes.
Unfortuantely, I'm actually trying to use the machine to meet some urgent deadlines and all this is not making it at all easy.
I had had great hopes for 10.7.2 - I thought that the crashes must be pretty common, so would have a common aetiology. There do seem to have been some fundamental changes to the file sytem and to the video interface (that seems to cause problems to brand new iMacs as well as to my 2009 iMac).

I moved the project files and now I can't get them back into iMovie 11

I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
Someone please tell me there's a way to get the project files open again. Thanks

enoughsaid3 wrote:
... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
• on your Mac, Apps/Utilities you'll find Disk 'Utility'
• on the left lane, you'll notice your connected hard drive(s)
• select it, click on the 'erase' tab
• NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
that's why you should do it as step#1 after purchasing a new drive
done ...-

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

HT201210 i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

i have update and restore my wife iphone to 7.0.4 and i lost all the data what to do now? all contacts and kids photos goooone , we have the same apple ID and when i tried to restore from i cloude , i restored my contacts not her???!!!!!

Looks like you restored your backup file to her phone. If you didn't back up your wife's phone first, then the data is gone, sorry.

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them.

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past. The bridge no longer shows the picture view of my NEF files. These are Nikon NEF files from the Nikon 5100 DSLR camera. How do I fix this?

I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past.
When you re-installed Photoshop, you also re-installed the version of Camera Raw which shipped with Photoshop - in other words you reverted to an older version of Camera Raw which does not support the D5100.
Camera Raw plug-in | Supported cameras
The D5100 was first supported in Camera Raw version 6.4.
In Photoshop, click Help > Updates to update Camera Raw.

Colors and fonts different on 2 different macs,same project file and assets

Similar Messages

Maybe you are looking for